The issue you're describing with the chains is that you weren't using a ripping chain at the start. Standard chains are cut at 25-30 degree angles which is too aggressive for milling. A ripping chain is cut at 10-15 degrees. A skip tooth ripping chain is the best way to go as it's not aggressive and the skip teeth allow enough space for chips to be properly discharged, allowing your saw to run at a higher constant rpm.
If you look up the parts distributor for Oregon Forestry in your area then you can contact the distributor directly. In Canada it's CPT and Theo Turgeon. @@uncleharley1
This is truly the most heartwarming and genuine thing I've ever witnessed. Many people don't realize that before bureaucracy and regulations, it was simply about living within one's means. For young individuals just starting out, this often feels unattainable. However, what you’re doing offers hope, especially since many believe they will never be able to afford their own homes in this economy. You’re proving the skeptics wrong! Joseph - "Let the pessimists construct their lives on shaky foundations, while you continue to build yours strong and secure."
I'm not sure why this video came up on my feed but it was absolutely facinating. I live on 10 acres in SC and I had not thought of using a chainsaw mill before. Now, many projects are very doable. Thanks!
For my mill, so I didn't lose too much of the log, I made a "Ladder Frame" from Uni-Strut (From Menards) and then made Pointed Studs from 1/4"=20 Bolts - sharpened to a point. I lay the ladder frame on the log, with the sharpened bolts mounted on the ladder rungs, pointing down. I just tap them down with and axe or hammer and start milling. I lose around an inch of log on my first slab. Works pretty good and easy/fast to setup. I could draw this up if you, or others, have any interest/questions.
I thought of that style but is it fast to install and have it parallel to the center point of the log. I'm using the same dual rail system as Mr ringworm and it's very adaptable to non perfectly straight logs.
I'm also interested. I had a similar idea but this far only got as far as the ladder unistrut frame, which rests on some ply brackets. My clever plan to cut the unistrut down to make it easier to move the top cut bracket around backfired, since now it keeps trying to sag in the middle
Sooo very helpful, thank you! I'm a 62 yr old female felling all my trees,and am ready to start milling and have watched hours of jumbled and incomplete. Keep doing what your doing !! Pamela Brewer Choctaw AR
1st time here. I really enjoyed it. Finally, you suffered over a year before got it right, now you enjoy it. It reminds me of my baking habit. I started making our bread and some pastry years ago. Now I am able to bring good stuff out by any circumstances. If someone asked me how to do it right, I would say it is easy. You have to screw it up few hundred times, and you got it.😊
I just bought 10 acres (and the small Granberg log mill) in Washington state. I have had SO much fun out there. Working on a picnic table now. Finished my alder sawhorses about 5 days ago. I love your videos man. I think they helped me finally pull the trigger. Thank you, brother
My first video on your channel. I have a few words I would like to share with you that I imagine are not very typical, since log milling is not my usual haunt on YT. 1: I very much appreciate what I judge to be your sincere and honest wisdom you are sharing regarding your experience. Even the self deprecating remarks. Maybe even especially the self deprecating remarks. All too often people feel compelled to share their wisdom, as if it the acme of accumulated wisdom for their topic. While obviously falling far short of the target they were aiming at. Watching someone engage in such thorough and well said candor about their experience was enough to make me continue watching a video I typically have little interest in engaging with. 2: I also appreciate your willingness to just plant your ass in an area, and make the most out of what you have, the best way you can, with the tools and knowledge you have available to you. There is much to be said about not only an honest days work, but also for that very same work slowly pulling you towards enjoying the wine of satisfaction that the vineyard you are tending to has produced. It is a vanishing ethic. One which I very much miss being surrounded by. Good luck in your labors, man. I look forward to vicariously sharing in your successes and failures, as I plan on subscribing to your channel on those above merits alone. Thanks.
Once I got a job with a company that gave us free boots each year, and a co-worker suggested extra wide boots, even if they needed to be ordered instead of just bought at the store. Its a big help, comfortable right away. Also, we are required to have safety toe. One job I worked outdoors in the snow, and no matter how warm my legs and feet were, my toes were so cold they were in pain. I got a "composite" toe instead of steel, and they are awesome. Lighter than steel, and toes don't get cold anymore.
I provide for my wife and 3 children. My wife stays home with the kids so money is very thin. Our back porch is heavily used and I can’t afford lumber to replace our rotting deck. I want to say thank you for this. You helped a ton. God bless you.
That doesn’t mean you didn’t invent it, it just means you can’t take credit for it. Ecclesiastes 1:9 NIV What has been will be again, What has been done will be done again; there’s nothing new under the sun.
It was a bad idea. Bu the time hes done using the wrong saw he will want 5 times as much for a board as the lumber yard. With a portable mill Its alot of work. Sorry but you are better off finding the money for a mill.
I stumbled on this channel while searching on building atv bridges. So I first watched episode #39. I normally make my atv bridges out of regular lumber so this methodology got me interested enough to look into your channel. I must say after one week of binge watching all of your content, I finally got through all of your episodes. I look forward to watching your new content as you continue to produce it.
If you follow your cuts with wedges every two to three feet, opposite sides behind the saw, your cuts will be pinch free and smoother. Chain is not the problem as long as it is a rip chain. A slight angle in the cut, like slicing cheese, works good too.
I really like your chainsaw milling setup. It does the job, you enjoy doing it, what would be a problem. Thanks for going over all of it. Lots of questions answered. Thumbs Up!
I don’t know how I ever came across this video, but I’m sure glad I did. What a great video. So glad you decided to just ramble on instead of just giving the specs of making this mill. There’s a lot of knowledge packed into it! I’m definitely a follower now! 😊
Great video. I’ve done a little bit of milling on a homemade chainsaw mill… what helped me a lot was gravity. One side of the log is always 6-12” lower than the other. Thanks for the tips.
First time viewer, therefore I’M GLAD you demonstrated using the winch👏👏👍. Also, my first time reviewing a chainsaw mill, and was extremely impressed with all the information, filming, editing, etc. you put into it. I am an instant fan and have to check your other videos.👍👍👍
I'm really impressed with your thought process and how you've over come your mistakes. They seem to not bother you, just motivates you into doing it another, and probably a better way. Kudos to you for taking on something that many many people would not even consider. I also agree with you about the high cost of lumber, it's ridiculous. Enjoy your videos very much my friend. Steve
This is the first video I've seen from you. Extremely informative, straight to the point w/ no BS. I really appreciate the time you spent on this video, I learned some invaluable info. Subbed, greetings from Germany 🇩🇪 👍 🍻
Same as the other two. Want a bandsaw mill, but may try this first. I have oak. Saw another video where two guys used what looked like an aluminum ladder for their bars. Were doing long lengths, wide cuts, 48 inch chain bar. They didn't give any how to's. Yours....very informative. Thanks. Subscribed.
Nice video Ryan, thanks! My approach to building a shower at the cabin was to make it a sauna. I set a pot of water on the sauna stove and while it is warming I can sit and enjoy the warmth of the sauna. Once the water has reached the temperature I want I pour it in a pump-up garden sprayer and use that to shower. (The pump sprayer has never been used for chemicals. It also has a longer hose and a spray nozzle that is better suited to showering than the wand-nozzle it came with.)
Sauna is a great way. They don't need to be complicated at all. I use the saunas built by my great-grandfathers in Michigan. I prefer them in the winter over summer. They're a hundred years old. If you build a two-room building, then you have a nice changing room not as hot as the bathing room.
The quality of your video has been enhanced by candor, experienced knowledge, and artistic patience, covering the full spectrum of possibilities; such as proper chain maintenance. Thank you!❤
I'm a complete noob, about to embark on using trees to build furniture and ultimately a log structure. Feeling overwhelmed yet inspired after watching your video. NEW SUBSCRIBER 🎉
Oh man, you got me! This video ROCKS! I was really thinking I “need” a bandsaw mill for my projects but I am going to go this route. MANY THANKS for ALL that you shared!
@@beebob1279 look, one can choose to buy only the bare minimum, cheaper tools and then do everything the most difficult and slow way on the cheap... so one may think. Or one can choose to equip themselves properly, which saves time, which saves money, which allows one to continue to invest more $ into their equipment making the entire operation easier and more productive, while providing an opportunity to make a little side cash w/ said equipment. I ran an Alaskan for the big logs only; over 32" wide. it's been gathering dust since that first year. I now butterfly large logs vertically, standing in top. Sure, there's such more to it, but that's the gist. Honestly can't stand the Alaskan mill. so much effort and so slow. My old mentor always said, "work smart, not hard." It'd be more cost effective to hire a portable band saw to mill up your logs, rather than spend all that time using an alaskan mill. So, I own a manual push band saw (Timbery M280 with a 25HP engine, it was under $10,000) and ran the operation on the cheap before I got serious and invested in a skid steer and set up the operation as it should be; milling shed to mill outta the sun, a lumber shed, storage shed for skid steer and operation tools. I just could not do that with an alaskan mill w/o losing my mind. the hard way: I would either buy a dump truck load of logs or fall trees on the property. Either way, I had a log storage, hence my need t excavate a "and" for the operation. . I use to drag my logs w/ the truck, from log pile to mill. I installed two 4x6's w/ tapered end to create a log loading ramp, Running a single carriage bolt thru each one which was connected to the angle iron tabs I welded onto bottom of the band saw rails. I used a boat winch ($15 used) to roll logs up the ramps and onto mill. I did this for several years, it worked. AND... It eventually drained me, b/c of all the time it took just to move and load one log, then load up the lumber slabs and move and stack them, by hand. I learned by doing it the hard way. Looking back, I now cringe. easy way: I then bought an old skid steer. I shopped for a machine that I could use for many other things. I found a used machine with 4 attachments that I could use to work my land; back hoe, auger, forks, bucket... and I bought a used grapple bucket. The entire operation changed at this point. Not only have I excavated a new log milling area/pad on my hillside sloped property, I have excavated a road down to the lower forty, cut trees down there, hauled the logs up the road, and used the grapple bucket to load all the slash into the dump trailer (which I also make money w/ by hauling customer's slash/trash! There is NOTHING like the feeling of rolling up to the dump with a huge dumper load of slash or trash; dumping and rolling out within 5minutes). I have built 5 huge retaining walls with 200+ massive boulders (3-4 diameter). I use the auger to dig fence holes, for milled fence posts, both for myself and customers. It's all a tax write off now, b/c I bought all of it under my LLC. I guess my point; it may serve one to think a few years down the road, what one might consider doing elsewhere on the property or with your land/home, rather than just thinking of the immediate project at hand. The band saw changed my life. and then it changed again once I got the skid steer. I now have the equipment to do all kinds of things I would not have dreamed of... including snow plowing my property and a few neighbors (making more money off the skid steer and knowing I can always move any amount of snow that drops here; typically 10-15' per winter) it might sound more complicated, but it has been a progressive journey for me. I'm still remodeling the old cabin, using my band saw and wood/work shop (which I also built using my milled lumber). With the wood shop equip. and I can make T&G, and mill anything for my needs. This year the back deck get refurbished with a roof over the entire deck. I pay for hardware only. I use the skid steer to move lumber to that area. I set beams with it. Looking around the compound I can point to all kinds of projects that I could not have done without a machine. I just think it's silly to choose a cheaper tool that work slowly, is far less accurate and has no value towards making money on the side. But hey, we all enjoy doing things the way WE like to do things For some of us, we have fun regardless. I have always thought to keep in mind there might be an easier way that will offer more.
@@dgodrummer8110 I'm done and it was a challenge. But I have it and it's air drying. Planning on making some flooring with it, cabinets, and a few for gun stock while I build flintlock rifles. The rest? Not sure what to do with it. I'll store it until I need it
I copied your rail and bracket setup a while back. Worked great. I did make a wider set of plates to use when milling some 30” diameter oak. 36” Granberg mill and a Holzfforma 660 pro saw with 36” bar. I think the pate and rail setup can’t be beat for heavy duty and speed of setup.
Thank you. This is one of the best best UA-cam videos I've ever watched. This was like a Master Level Course on chainsaw milling. I really feel like I learned a lot and will avoid a lot of trial and error once I purchase a mill. Now I will go back and watch your other videos. Keep up the good work.
Great information. I have my Chainsaw mill equipment coming and I was just planning to use an extension ladder as my guide for the first cut, however After seeing this I will replicate your setup instead. Thank you!
Great job of explaining the details that a no experience guy like me would need to know. Wisdom born of pain. We'll done. Good luck. Have a great life out there!
Running a stihl ms661c-m on a 36" Granburg mill and bar....square ground full skip chain and it blows through oak. Always enjoy the videos worm...we live similar lives
Great video! Built this same setup a few years ago and have milled lots of walnut. Used some surplus 1-7/8" strut for the bars and tilted my log table to make it a little easer cutting. PS. My old 1980 Homelite XL12 just keeps going.
Thanks for the effort and tons of information, Ryan. My first search to alaskan chainsaw mill and you appeared. Your videos are so easy going and nicely unexcited😀Thanks from Southern-Germany to the Michigan forests
It’s guys like you!!🙏💪 Keen observation, never having had an original thought. It’s all good. No one has had one, because they originate from somewhere other than ourselves. Hope you got your setup going. Michigan is a beautiful place with wonderful people. Cheers!!
With a new pup coming soon, you will want to insulate the floor for them. Erik Grankvist used nothing but his wood shavings and sawdust for his floor. Decent R value and its F - R Double EE. You are making tons of sawdust. Your pup will thank you if you use it to keep their tush warm 🐶
I've been teetering back and forth on chainsaw mill vs bandsaw mill. After this video, I think I'll save myself some money and go with the chainsaw mill. Cheaper start-up and I can always get a bandsaw if I REALLY like it. Really enjoy this channel - keep up the great work!
I did just this about 2 years ago. Just went to a full on bandmill from frontier/norwood. Its hard on saws and is very time consuming to use a chainsaw
For someone who is milling on the occasion, I can attest to how handy and convenient it is to be able to chainsaw mill. I only have experience in freehand chainsaw milling (I just spend the time to plane my work) but my goodness, what a total blast! Nothing beats the ability of being able to mill basically anywhere on the fly. Run a milling chain if your worried about the load on your saws. Don't listen to what everyone says about what you can and can't do with your saw. Someone told me my saw (ms 261) wouldn't be good to slab out logs. Here I am a year and some odd into my saw ownership, running it as I intend to use it since day one. Havnt had ONE issue. Not even so much as a thrown chain. Nothing. And I've milled quite the collection of slabs!
Bad ass! I owned two Lucas mills for about 20 years. Sold them to a neighbor. Just felled a 40” DBH sugar pine and I May end up blowing the dust off of and using the Alaska mill for the first time in many years. Good inspiration from you.
Excellent video. I've been milling for about 11 years, always used an extension ladder for the initial cut. Been looking at this setup with the plates for a while now. I think you just sold me on that idea. Thanks buddy. You covered a lot of good points on milling in this video. Things I also found out through trial and error. It sure is fun though. MS 460, 32" bar, Alaskan Mark III.
Like your chainsaw mill. I can see how satisfying it would be running it all day. Plus the beautiful boards are perfect for all sorts of projects. Keep your chain sharp and some wedges handy and just cut cut cut baby. Thanks for a great video. Be safe out there. It only takes i second of day dreaming and bang your cut. Be safe and pay attention to your work and surroundings.
Well worth it! What an amazing set up, this is the first time I have watched your channel. Very impressive! Loved all the details you covered. Great job
i love your shows. you crack me up and i learn stuff from every show. ive been living in the Au Sable State Forest for 26 years in a trailer but now i have so many ash trees on the ground it would be a crime not to start making lumber. thanx fer the help.
Wow, very informative. I have a log that I want to mill and didn't know how I would start the first cut. I've never milled before so I was scratching my head. I too have 95% cedar on my 10 acre property here in Texas. I want to cut out some beams for decorative purposes for a cabin I'm building. I like your setup and appreciate your tips. Thanks!
Thank you for a really useful and inspiring lesson in practical wood milling. I think the bar system is really versatile and practical. It is really enjoyable being out “wood landing”, is’int it! Greetings from the Emerald Isle.
Thank you for going in depth on this. I've had my mill for a while now and haven't used it. I would have made a few mistakes right away had I not watched this, thank you.
First of your video's I've ever watched. I think that because your not a 'semi-professional' it's much better explanation than normal where you expect people to know some stuff. I have some oak that was blown down during Hurricane Ian last year, your explanation is more than good enough for me to make something to mill it with a 20" chainsaw when the weather cools down ('it's 95 but will feel like 110, sometimes you just want to slap the weatherman in his AC cooled studio) Thank you very much
very good video...I have been milling for about a year and experienced most of the issues you mentioned, but I will never quit milling I totally enjoyn the process. I also finally concluded that most of the failures are due to chain issues. Unfortunately my STIHL mechanic wasnt familiar with milling angles on the chain or them correct chain to use....I think I have worked that out. also bought some Granberg chains. anyway, I dont watch many videos to the end but I did yours
First time i watched your channel. I like the chainsaw mill. I been thinking about one for a little while now. Got trees down in the yard. Hate to waste them. And like you i do not want to pay those prices. I have not been watching you forever but i will watch your channel now. Keep up the good work
For cleaning your chains if you are where power isn’t a problem you can get an old computer fan ( usually about 6” x6” and high speed ) break a piece of one of the blades off and attach it to any container ( an old style metal coffee can is what I use ) fill it with whatever solvent you want put your chain in it and turn it on over night. The vibration will help more than you would think. I’ve never tried it with chains but I used to work on industrial printers and I worked great with ink and those little fans are a dime a dozen. People get tired of their computers microwaves or whatever and throw them in the dump. I appreciate your tutorial I’m looking around at mills right now and that was very helpful. You have a blessed day
Have you tried the square filing I've noticed that my chains seems to hold the edge a whole lot better with the square grind usually the beak of The cutting edge gets a micro bend in it and acts like the end of a ski even though it feel pretty Sharp it just won't cut very good .. I've heard a couple of these guys that Mill say they completely remove the drags for ripping and some file the rakers down a bit more for ripping probably around .040" or 10° with the protractor ..that is if your little saw will pull it .. I've got a little MS 362 in my arsenal little thing is a beast that's my favorite do everything saw I do like my 660's tho 👍 I've got an 880 that thing is just too heavy and doesn't seem to have much more power than the 660's matter of fact my ported 660's probably edge it out a bit and they're much lighter although that little bit of extra torque from that big 880 thumper of a piston may shine a little bit more in the monster wood
This is the first video of yours I've seen and it was great! I'm just purchasing my first chainsaw mill and the information and tips you provided were awesome. Thanks for making these videos, cheers and be safe bro!
I have the same saw and I'm going to attempt to make some lumber myself. With your videos I ain't scared :) Thank you for all the invaluable information
If anybody is wondering, I mill a lot of hardwood (oak and maple mostly) and started out with just about the same setup. A 50cc saw will get the job done, but it really isn't enough saw. I recently upgraded to a 98cc pro saw (more than I'll ever need and not just for milling) and it mills hardwood so much better. Every couple boards I touch the chain up with a file and I can mill 2-3 times more wood in half the time
Daniel, I hate it when people use oak for firewood!!! They take so long to grow. My belief is to make something lasting out of them if they are cut....... However, sometimes they do need to come down. Whether they are about to fall on someones house or trees do fall on their own so cutting is fine. But again, at least make something of value rather than using it for firewood!
A thought on the longer bars. The chain is going through the log well below the surface of the log. And well below those bars. Why don't you make some sort of adjustable support to go on top of the log, and below those bars, for in the middle? Make those bars rock solid for the full length, that way... I guess it could even be as simple as a couple of wooden wedges that have some adjustable way to latch to the bars.
Sounds like you might be using the default cross-cut chain. Switching over to ripping chain which is designed for this purpose ought to bring more hardwoods into the mill's reach.
Make you a drip oiler for your bar on the mill you can use a pop bottle with a length 1/4' hose and a needle for pumping a football up for the tip to direct it right on your chain will help alot with chain and bar life you can use used motor oil for it when it's cold out
Received my portable mill today, really look forward to cutting tomorrow. Reason is walked out of Hom D and cha ching$$$ Also new hobby making cutting boards, hatchet handles, list goes on. Love your videos, keep em coming.
Another excellent video!! I really appreciate how in depth you went and all your advice from experience! I'm hoping to finally get started milling this spring, and your insight is very valuable.
Enjoyed your video you are a good teacher anticipating questions folks would have. One of your commentors was talking about using saw chips as insulation. I wouldnt recommend that die to moisture and bug problems it's organic and would want to rot taking with it any wood in contact with it. I saw a guy on u tube who used reflective bubble wrap stapled to the underside of his floor. I think he's in a cabin in Maine. He was very happy with the result.
Dude fantastic video, new subscriber. We've just recently sold our house & bought rural wooded property in SE Missouri, currently living in a tent while waiting for our steel building to get put up which will serve as shop & living space while planing our house build. I like you hate spending the jacked up prices for materials to build so this was helpful. The youtube algorithm placed this in my feed, wasn't searching for it but was thinking about it so go figure.
Thanks YT, for suggesting a video about a guy thanking you for suggesting a video...but seriously thanks for the video, I have logs and this looks perfect.
Dont know who the other John OLDONEKANOLE is but not me . What a great explanation on why you use a chainsaw mill . You are a good speaker and your vids are fantastic. Very much fun to watch . You are a very good problem solver . Keep living the dream as long as you can. Thank you for sharing your dream and stay safe .
Thank you for your info and the foresight Thank one of the comments on ripping chain I’ll be doing oak maple. Been back and forth on type of chain Much appreciated
Thumbs up brother, So many great tips and content. Great to learn from your trial and error and pass on the knowledge so others can avoid problems. Solid setup, clear speaking and good audio,, not rambling, tons of great info packed into the video. Too many UA-cam videos try to stretch out something and go on an on. You ROCK bro, keep up the great work and it's always great to see people who enjoy the great outdoors.✅✅✅
Have the same mill (minus the winch). Absolutely love your starting set up. I used an old aluminum ladder what I don't use for climbing anymore. Boy does your set up look easy. I used a Stihl 029 super to mill 900 board foot of black cherry. The trees were dying and I didn't want firewood. My neighbor who is in construction and I weren't sure the saw would make it with that much cutting. I went through two ripping chains to get it all done. It was very satisfying to successfully do something I never did before. Great neighbor and I shared some of my lumber with him. It's just about dry now and I can start using it for projects in the mountain house. Have you tried or done quarter sawing with the set up yet?
What an enjoyable and extremely helpful adventure you guided me on. Thank you so much. This is the one video that has now convinced me that I can do this, and surely enjoy the journey much like you have. You covered the details and concerns I had perfectly. Cheers... 8^)
I emulated your set up with some minor variations and can tell you it's kickass! I bought full 20' sticks of square stock and cut it at 8-12... ive fabricated an internal bar to mate them for long slabbing... helps reduce flex too! Thabk you!
Hi Ryan! I've been looking at the G-777 and the G-778...I'm kinda leaning towards the G-778 because it offers a second point of attachment on the chainsaw bar. I run a Stihl 291 with a 20" bar, the G-778 is meant for a 24" bar but it looks like you can adjusted it down to a 20" Bar. Have you had any issues with the G-777 at all? And would you buy the same model again? Thanks for your channel great learn avenue! THX Nick
The issue you're describing with the chains is that you weren't using a ripping chain at the start. Standard chains are cut at 25-30 degree angles which is too aggressive for milling. A ripping chain is cut at 10-15 degrees. A skip tooth ripping chain is the best way to go as it's not aggressive and the skip teeth allow enough space for chips to be properly discharged, allowing your saw to run at a higher constant rpm.
I was just going to add the same comment. Lots of people don't understand the difference between cross-cut and rip-cut.
@@wxfield Thank you both. I've never heard of the difference!
On my 038, I run double skip ripping chain.
Where do you get your skip tooth rip chains
If you look up the parts distributor for Oregon Forestry in your area then you can contact the distributor directly. In Canada it's CPT and Theo Turgeon. @@uncleharley1
Milling yourself saves you a ton of $$$. Dude your lucky most of us can't do that or have the resources. Thank you for the content.
This is truly the most heartwarming and genuine thing I've ever witnessed. Many people don't realize that before bureaucracy and regulations, it was simply about living within one's means. For young individuals just starting out, this often feels unattainable. However, what you’re doing offers hope, especially since many believe they will never be able to afford their own homes in this economy. You’re proving the skeptics wrong!
Joseph - "Let the pessimists construct their lives on shaky foundations, while you continue to build yours strong and secure."
I'm not sure why this video came up on my feed but it was absolutely facinating. I live on 10 acres in SC and I had not thought of using a chainsaw mill before. Now, many projects are very doable. Thanks!
For my mill, so I didn't lose too much of the log, I made a "Ladder Frame" from Uni-Strut (From Menards) and then made Pointed Studs from 1/4"=20 Bolts - sharpened to a point. I lay the ladder frame on the log, with the sharpened bolts mounted on the ladder rungs, pointing down. I just tap them down with and axe or hammer and start milling. I lose around an inch of log on my first slab. Works pretty good and easy/fast to setup. I could draw this up if you, or others, have any interest/questions.
Me too
I thought of that style but is it fast to install and have it parallel to the center point of the log. I'm using the same dual rail system as Mr ringworm and it's very adaptable to non perfectly straight logs.
Pics?
I'm also interested. I had a similar idea but this far only got as far as the ladder unistrut frame, which rests on some ply brackets. My clever plan to cut the unistrut down to make it easier to move the top cut bracket around backfired, since now it keeps trying to sag in the middle
That sounds pretty cool
One of the better milling setup presentation I’ve seen and not over complicated. Thank you.
Sooo very helpful, thank you! I'm a 62 yr old female felling all my trees,and am ready to start milling and have watched hours of jumbled and incomplete. Keep doing what your doing !! Pamela Brewer Choctaw AR
1st time here. I really enjoyed it.
Finally, you suffered over a year before got it right, now you enjoy it.
It reminds me of my baking habit. I started making our bread and some pastry years ago. Now I am able to bring good stuff out by any circumstances. If someone asked me how to do it right, I would say it is easy. You have to screw it up few hundred times, and you got it.😊
I just bought 10 acres (and the small Granberg log mill) in Washington state. I have had SO much fun out there. Working on a picnic table now. Finished my alder sawhorses about 5 days ago. I love your videos man. I think they helped me finally pull the trigger. Thank you, brother
I just bought a chainsaw, but Ringworm is definitely an inspiration. Right now, it's for firewood, but this is very interesting too.
@Daniel Nelson Western Washington, South Puget Sound. How much for the Woodmizer? : )
My first video on your channel. I have a few words I would like to share with you that I imagine are not very typical, since log milling is not my usual haunt on YT.
1: I very much appreciate what I judge to be your sincere and honest wisdom you are sharing regarding your experience. Even the self deprecating remarks. Maybe even especially the self deprecating remarks. All too often people feel compelled to share their wisdom, as if it the acme of accumulated wisdom for their topic. While obviously falling far short of the target they were aiming at. Watching someone engage in such thorough and well said candor about their experience was enough to make me continue watching a video I typically have little interest in engaging with.
2: I also appreciate your willingness to just plant your ass in an area, and make the most out of what you have, the best way you can, with the tools and knowledge you have available to you. There is much to be said about not only an honest days work, but also for that very same work slowly pulling you towards enjoying the wine of satisfaction that the vineyard you are tending to has produced. It is a vanishing ethic. One which I very much miss being surrounded by.
Good luck in your labors, man. I look forward to vicariously sharing in your successes and failures, as I plan on subscribing to your channel on those above merits alone. Thanks.
My first video too, and I don't want t throw away trees I am cuttingdown to then go buy wood to build, so this video is golden to me....
Once I got a job with a company that gave us free boots each year, and a co-worker suggested extra wide boots, even if they needed to be ordered instead of just bought at the store. Its a big help, comfortable right away. Also, we are required to have safety toe. One job I worked outdoors in the snow, and no matter how warm my legs and feet were, my toes were so cold they were in pain. I got a "composite" toe instead of steel, and they are awesome. Lighter than steel, and toes don't get cold anymore.
I provide for my wife and 3 children. My wife stays home with the kids so money is very thin. Our back porch is heavily used and I can’t afford lumber to replace our rotting deck. I want to say thank you for this. You helped a ton. God bless you.
I'm 70 years old and every time I thought I had a IDEA someone else already had been there and done that.
That doesn’t mean you didn’t invent it, it just means you can’t take credit for it.
Ecclesiastes 1:9 NIV
What has been will be again, What has been done will be done again; there’s nothing new under the sun.
why is that.
Me to.??
@@c50geno
It was a bad idea. Bu the time hes done using the wrong saw he will want 5 times as much for a board as the lumber yard. With a portable mill Its alot of work. Sorry but you are better off finding the money for a mill.
I used to think you were nuts but now I realize your true genius
I stumbled on this channel while searching on building atv bridges. So I first watched episode #39. I normally make my atv bridges out of regular lumber so this methodology got me interested enough to look into your channel. I must say after one week of binge watching all of your content, I finally got through all of your episodes. I look forward to watching your new content as you continue to produce it.
If you follow your cuts with wedges every two to three feet, opposite sides behind the saw, your cuts will be pinch free and smoother. Chain is not the problem as long as it is a rip chain. A slight angle in the cut, like slicing cheese, works good too.
Right tools for the right job. Great class!
One more f , if not the best video you've done. Immensely enjoyable and you've answered a lot of the questions I've had about chainsaw milling.
I really like your chainsaw milling setup. It does the job, you enjoy doing it, what would be a problem. Thanks for going over all of it. Lots of questions answered. Thumbs Up!
I don’t know how I ever came across this video, but I’m sure glad I did. What a great video. So glad you decided to just ramble on instead of just giving the specs of making this mill. There’s a lot of knowledge packed into it! I’m definitely a follower now! 😊
Great video. I’ve done a little bit of milling on a homemade chainsaw mill… what helped me a lot was gravity. One side of the log is always 6-12” lower than the other. Thanks for the tips.
First time viewer, therefore I’M GLAD you demonstrated using the winch👏👏👍.
Also, my first time reviewing a chainsaw mill, and was extremely impressed with all the information, filming, editing, etc. you put into it. I am an instant fan and have to check your other videos.👍👍👍
I'm really impressed with your thought process and how you've over come your mistakes. They seem to not bother you, just motivates you into doing it another, and probably a better way. Kudos to you for taking on something that many many people would not even consider. I also agree with you about the high cost of lumber, it's ridiculous. Enjoy your videos very much my friend. Steve
This is the first video I've seen from you. Extremely informative, straight to the point w/ no BS. I really appreciate the time you spent on this video, I learned some invaluable info. Subbed, greetings from Germany 🇩🇪 👍 🍻
Same as the other two. Want a bandsaw mill, but may try this first. I have oak. Saw another video where two guys used what looked like an aluminum ladder for their bars. Were doing long lengths, wide cuts, 48 inch chain bar. They didn't give any how to's. Yours....very informative.
Thanks. Subscribed.
So much good info in this vid. I've run into all of these issues milling & this vid can really assist anyone looking to do so.
Great Video and great presentation. No frills, just the facts. Thank you. Looking forward to more quality content like this.
Nice video Ryan, thanks! My approach to building a shower at the cabin was to make it a sauna. I set a pot of water on the sauna stove and while it is warming I can sit and enjoy the warmth of the sauna. Once the water has reached the temperature I want I pour it in a pump-up garden sprayer and use that to shower. (The pump sprayer has never been used for chemicals. It also has a longer hose and a spray nozzle that is better suited to showering than the wand-nozzle it came with.)
Thx for your tip😊
Sauna is a great way. They don't need to be complicated at all. I use the saunas built by my great-grandfathers in Michigan. I prefer them in the winter over summer. They're a hundred years old. If you build a two-room building, then you have a nice changing room not as hot as the bathing room.
The quality of your video has been enhanced by candor, experienced knowledge, and artistic patience, covering the full spectrum of possibilities; such as proper chain maintenance. Thank you!❤
I'm a complete noob, about to embark on using trees to build furniture and ultimately a log structure. Feeling overwhelmed yet inspired after watching your video. NEW SUBSCRIBER 🎉
Oh man, you got me! This video ROCKS!
I was really thinking I “need” a bandsaw mill for my projects but I am going to go this route. MANY THANKS for ALL that you shared!
I thought about a band mill too. Until like he said how do I move the logs to the mill. I was only doing logs on my property that's not even an acre.
@@beebob1279 look, one can choose to buy only the bare minimum, cheaper tools and then do everything the most difficult and slow way on the cheap... so one may think. Or one can choose to equip themselves properly, which saves time, which saves money, which allows one to continue to invest more $ into their equipment making the entire operation easier and more productive, while providing an opportunity to make a little side cash w/ said equipment.
I ran an Alaskan for the big logs only; over 32" wide. it's been gathering dust since that first year. I now butterfly large logs vertically, standing in top. Sure, there's such more to it, but that's the gist. Honestly can't stand the Alaskan mill. so much effort and so slow. My old mentor always said, "work smart, not hard."
It'd be more cost effective to hire a portable band saw to mill up your logs, rather than spend all that time using an alaskan mill.
So, I own a manual push band saw (Timbery M280 with a 25HP engine, it was under $10,000) and ran the operation on the cheap before I got serious and invested in a skid steer and set up the operation as it should be; milling shed to mill outta the sun, a lumber shed, storage shed for skid steer and operation tools.
I just could not do that with an alaskan mill w/o losing my mind.
the hard way:
I would either buy a dump truck load of logs or fall trees on the property. Either way, I had a log storage, hence my need t excavate a "and" for the operation. .
I use to drag my logs w/ the truck, from log pile to mill. I installed two 4x6's w/ tapered end to create a log loading ramp, Running a single carriage bolt thru each one which was connected to the angle iron tabs I welded onto bottom of the band saw rails. I used a boat winch ($15 used) to roll logs up the ramps and onto mill. I did this for several years, it worked. AND... It eventually drained me, b/c of all the time it took just to move and load one log, then load up the lumber slabs and move and stack them, by hand. I learned by doing it the hard way. Looking back, I now cringe.
easy way:
I then bought an old skid steer. I shopped for a machine that I could use for many other things. I found a used machine with 4 attachments that I could use to work my land; back hoe, auger, forks, bucket... and I bought a used grapple bucket.
The entire operation changed at this point. Not only have I excavated a new log milling area/pad on my hillside sloped property, I have excavated a road down to the lower forty, cut trees down there, hauled the logs up the road, and used the grapple bucket to load all the slash into the dump trailer (which I also make money w/ by hauling customer's slash/trash! There is NOTHING like the feeling of rolling up to the dump with a huge dumper load of slash or trash; dumping and rolling out within 5minutes). I have built 5 huge retaining walls with 200+ massive boulders (3-4 diameter). I use the auger to dig fence holes, for milled fence posts, both for myself and customers. It's all a tax write off now, b/c I bought all of it under my LLC.
I guess my point; it may serve one to think a few years down the road, what one might consider doing elsewhere on the property or with your land/home, rather than just thinking of the immediate project at hand. The band saw changed my life. and then it changed again once I got the skid steer. I now have the equipment to do all kinds of things I would not have dreamed of... including snow plowing my property and a few neighbors (making more money off the skid steer and knowing I can always move any amount of snow that drops here; typically 10-15' per winter)
it might sound more complicated, but it has been a progressive journey for me. I'm still remodeling the old cabin, using my band saw and wood/work shop (which I also built using my milled lumber). With the wood shop equip. and I can make T&G, and mill anything for my needs. This year the back deck get refurbished with a roof over the entire deck. I pay for hardware only. I use the skid steer to move lumber to that area. I set beams with it.
Looking around the compound I can point to all kinds of projects that I could not have done without a machine.
I just think it's silly to choose a cheaper tool that work slowly, is far less accurate and has no value towards making money on the side.
But hey, we all enjoy doing things the way WE like to do things
For some of us, we have fun regardless. I have always thought to keep in mind there might be an easier way that will offer more.
@@dgodrummer8110 You type a lot.
spending 10,000 for a band mill isn't so smart for 800 board feet of cherry.
@@beebob1279 ok then, have fun.
@@dgodrummer8110 I'm done and it was a challenge. But I have it and it's air drying. Planning on making some flooring with it, cabinets, and a few for gun stock while I build flintlock rifles.
The rest? Not sure what to do with it. I'll store it until I need it
I almost never leave comments, but this is an excellent video. I am going to have to re watch this a few times to get my own mill going. Great job!
I copied your rail and bracket setup a while back. Worked great. I did make a wider set of plates to use when milling some 30” diameter oak. 36” Granberg mill and a Holzfforma 660 pro saw with 36” bar. I think the pate and rail setup can’t be beat for heavy duty and speed of setup.
knocked out my first three boards today using this setup, thanks for the inspo
Thank you. This is one of the best best UA-cam videos I've ever watched. This was like a Master Level Course on chainsaw milling. I really feel like I learned a lot and will avoid a lot of trial and error once I purchase a mill. Now I will go back and watch your other videos. Keep up the good work.
Same...
Great information. I have my Chainsaw mill equipment coming and I was just planning to use an extension ladder as my guide for the first cut, however After seeing this I will replicate your setup instead. Thank you!
Great tutorial on the hows and whys of your mill setup, Thanx for sharing. You answered questions I didn't even have!!! Stay safe.
Great job of explaining the details that a no experience guy like me would need to know. Wisdom born of pain. We'll done. Good luck. Have a great life out there!
Running a stihl ms661c-m on a 36" Granburg mill and bar....square ground full skip chain and it blows through oak. Always enjoy the videos worm...we live similar lives
Great video! Built this same setup a few years ago and have milled lots of walnut. Used some surplus 1-7/8" strut for the bars and tilted my log table to make it a little easer cutting.
PS. My old 1980 Homelite XL12 just keeps going.
Excellent rundown of your setup. You did a good job of explaining this in full layman's terms. I'm gonna try. Thanks again!
Thanks for the effort and tons of information, Ryan. My first search to alaskan chainsaw mill and you appeared. Your videos are so easy going and nicely unexcited😀Thanks from Southern-Germany to the Michigan forests
"I never had an original thought in my life" 🤣 Subscribed right there and I dont even own a chainsaw.
It’s guys like you!!🙏💪 Keen observation, never having had an original thought. It’s all good. No one has had one, because they originate from somewhere other than ourselves. Hope you got your setup going. Michigan is a beautiful place with wonderful people. Cheers!!
With a new pup coming soon, you will want to insulate the floor for them. Erik Grankvist used nothing but his wood shavings and sawdust for his floor. Decent R value and its F - R Double EE. You are making tons of sawdust. Your pup will thank you if you use it to keep their tush warm 🐶
I've been teetering back and forth on chainsaw mill vs bandsaw mill. After this video, I think I'll save myself some money and go with the chainsaw mill. Cheaper start-up and I can always get a bandsaw if I REALLY like it. Really enjoy this channel - keep up the great work!
I did just this about 2 years ago. Just went to a full on bandmill from frontier/norwood. Its hard on saws and is very time consuming to use a chainsaw
For someone who is milling on the occasion, I can attest to how handy and convenient it is to be able to chainsaw mill. I only have experience in freehand chainsaw milling (I just spend the time to plane my work) but my goodness, what a total blast!
Nothing beats the ability of being able to mill basically anywhere on the fly.
Run a milling chain if your worried about the load on your saws.
Don't listen to what everyone says about what you can and can't do with your saw. Someone told me my saw (ms 261) wouldn't be good to slab out logs.
Here I am a year and some odd into my saw ownership, running it as I intend to use it since day one. Havnt had ONE issue. Not even so much as a thrown chain. Nothing. And I've milled quite the collection of slabs!
Bad ass!
I owned two Lucas mills for about 20 years.
Sold them to a neighbor.
Just felled a 40” DBH sugar pine and I May end up blowing the dust off of and using the Alaska mill for the first time in many years.
Good inspiration from you.
Excellent video. I've been milling for about 11 years, always used an extension ladder for the initial cut. Been looking at this setup with the plates for a while now. I think you just sold me on that idea. Thanks buddy. You covered a lot of good points on milling in this video. Things I also found out through trial and error. It sure is fun though. MS 460, 32" bar, Alaskan Mark III.
I’ve been watching for years now and I really don’t understand why your only at 43k subs. Great entertainment, keep it up.
Thanks for taking the time to document your process, very much appreciated.
Like your chainsaw mill. I can see how satisfying it would be running it all day. Plus the beautiful boards are perfect for all sorts of projects. Keep your chain sharp and some wedges handy and just cut cut cut baby. Thanks for a great video. Be safe out there. It only takes i second of day dreaming and bang your cut. Be safe and pay attention to your work and surroundings.
Well worth it! What an amazing set up, this is the first time I have watched your channel. Very impressive! Loved all the details you covered. Great job
That's some nice lumber right there, and all cut with a chainsaw. Bravo.
Great video. Great channel. Gotta say, you are a natural in front of the camera and a stellar editor.
You do a really nice job explaining everything. You have a gift for it 👍
I like this guy’s dry humor. 😆👌🏼
Algorithm brought me here. This is a satisfying thing to watch. With all the fir trees we have, this would be awesome to have.
appreciate your natural humility...
i love your shows. you crack me up and i learn stuff from every show. ive been living in the Au Sable State Forest for 26 years in a trailer but now i have so many ash trees on the ground it would be a crime not to start making lumber. thanx fer the help.
I just found your channel. First video I've watched. I'm glad you demonstrated the use of your winch come-along. Thank you for sharing!
Wow, very informative. I have a log that I want to mill and didn't know how I would start the first cut. I've never milled before so I was scratching my head. I too have 95% cedar on my 10 acre property here in Texas. I want to cut out some beams for decorative purposes for a cabin I'm building. I like your setup and appreciate your tips. Thanks!
excellent sound quality on your video. And Thank you for not playing music in the background.
Great informational video.
Thank you for a really useful and inspiring lesson in practical wood milling. I think the bar system is really versatile and practical. It is really enjoyable being out “wood landing”, is’int it! Greetings from the Emerald Isle.
Thank you for going in depth on this. I've had my mill for a while now and haven't used it. I would have made a few mistakes right away had I not watched this, thank you.
First of your video's I've ever watched.
I think that because your not a 'semi-professional' it's much better explanation than normal where you expect people to know some stuff.
I have some oak that was blown down during Hurricane Ian last year, your explanation is more than good enough for me to make something to mill it with a 20" chainsaw when the weather cools down ('it's 95 but will feel like 110, sometimes you just want to slap the weatherman in his AC cooled studio)
Thank you very much
self taught tradeschool sharings.
priceless.
Diy milling makes more sense than now than ever, cedar has got to be a very user friendly wood. Good setup.
very good video...I have been milling for about a year and experienced most of the issues you mentioned, but I will never quit milling I totally enjoyn the process. I also finally concluded that most of the failures are due to chain issues. Unfortunately my STIHL mechanic wasnt familiar with milling angles on the chain or them correct chain to use....I think I have worked that out. also bought some Granberg chains. anyway, I dont watch many videos to the end but I did yours
First time i watched your channel. I like the chainsaw mill. I been thinking about one for a little while now. Got trees down in the yard. Hate to waste them. And like you i do not want to pay those prices. I have not been watching you forever but i will watch your channel now. Keep up the good work
For cleaning your chains if you are where power isn’t a problem you can get an old computer fan ( usually about 6” x6” and high speed ) break a piece of one of the blades off and attach it to any container ( an old style metal coffee can is what I use ) fill it with whatever solvent you want put your chain in it and turn it on over night. The vibration will help more than you would think. I’ve never tried it with chains but I used to work on industrial printers and I worked great with ink and those little fans are a dime a dozen. People get tired of their computers microwaves or whatever and throw them in the dump. I appreciate your tutorial I’m looking around at mills right now and that was very helpful. You have a blessed day
Those plates you made. You need to market that idea. Those are amazingly useful. The best milling endplates I've seen, for sure
Great video, I learn something every time...had not thought about soaking and cleaning sap from the chain, I will be doing that now.
Add Kosher salt to the alcohol and shake! Works great.
Love watching a sharp chain cut through any log.
Have you tried the square filing I've noticed that my chains seems to hold the edge a whole lot better with the square grind usually the beak of The cutting edge gets a micro bend in it and acts like the end of a ski even though it feel pretty Sharp it just won't cut very good .. I've heard a couple of these guys that Mill say they completely remove the drags for ripping and some file the rakers down a bit more for ripping probably around .040" or 10° with the protractor ..that is if your little saw will pull it .. I've got a little MS 362 in my arsenal little thing is a beast that's my favorite do everything saw I do like my 660's tho 👍 I've got an 880 that thing is just too heavy and doesn't seem to have much more power than the 660's matter of fact my ported 660's probably edge it out a bit and they're much lighter although that little bit of extra torque from that big 880 thumper of a piston may shine a little bit more in the monster wood
This is the first video of yours I've seen and it was great! I'm just purchasing my first chainsaw mill and the information and tips you provided were awesome. Thanks for making these videos, cheers and be safe bro!
I have the same saw and I'm going to attempt to make some lumber myself. With your videos I ain't scared :) Thank you for all the invaluable information
If anybody is wondering, I mill a lot of hardwood (oak and maple mostly) and started out with just about the same setup. A 50cc saw will get the job done, but it really isn't enough saw. I recently upgraded to a 98cc pro saw (more than I'll ever need and not just for milling) and it mills hardwood so much better. Every couple boards I touch the chain up with a file and I can mill 2-3 times more wood in half the time
What saw did you get?
Daniel, I hate it when people use oak for firewood!!!
They take so long to grow. My belief is to make something lasting out of them if they are cut.......
However, sometimes they do need to come down. Whether they are about to fall on someones house or trees do fall on their own so cutting is fine.
But again, at least make something of value rather than using it for firewood!
A thought on the longer bars. The chain is going through the log well below the surface of the log. And well below those bars. Why don't you make some sort of adjustable support to go on top of the log, and below those bars, for in the middle? Make those bars rock solid for the full length, that way...
I guess it could even be as simple as a couple of wooden wedges that have some adjustable way to latch to the bars.
Sounds like you might be using the default cross-cut chain. Switching over to ripping chain which is designed for this purpose ought to bring more hardwoods into the mill's reach.
Make you a drip oiler for your bar on the mill you can use a pop bottle with a length 1/4' hose and a needle for pumping a football up for the tip to direct it right on your chain will help alot with chain and bar life you can use used motor oil for it when it's cold out
I remodel cabins and this setup would be perfect. Thanks for the info and expertise
Received my portable mill today, really look forward to cutting tomorrow. Reason is walked out of Hom D and cha ching$$$ Also new hobby making cutting boards, hatchet handles, list goes on. Love your videos, keep em coming.
Thanks 🙏 you’re a great guy helping others .
Used to mill logs for my gold mine back in 2006-2010 I miss those days. Doug firs where my main trees and loved every minute of it.
Another excellent video!! I really appreciate how in depth you went and all your advice from experience! I'm hoping to finally get started milling this spring, and your insight is very valuable.
Top drawer presentation ! Keep up the great work, you are an inspiration to others.
Enjoyed your video you are a good teacher anticipating questions folks would have. One of your commentors was talking about using saw chips as insulation. I wouldnt recommend that die to moisture and bug problems it's organic and would want to rot taking with it any wood in contact with it. I saw a guy on u tube who used reflective bubble wrap stapled to the underside of his floor. I think he's in a cabin in Maine. He was very happy with the result.
Dude fantastic video, new subscriber. We've just recently sold our house & bought rural wooded property in SE Missouri, currently living in a tent while waiting for our steel building to get put up which will serve as shop & living space while planing our house build. I like you hate spending the jacked up prices for materials to build so this was helpful. The youtube algorithm placed this in my feed, wasn't searching for it but was thinking about it so go figure.
Thanks YT, for suggesting a video about a guy thanking you for suggesting a video...but seriously thanks for the video, I have logs and this looks perfect.
Great video, you do an excellent job explaining your process. Thanks.
Dont know who the other John OLDONEKANOLE is but not me . What a great explanation on why you use a chainsaw mill . You are a good speaker and your vids are fantastic. Very much fun to watch . You are a very good problem solver . Keep living the dream as long as you can. Thank you for sharing your dream and stay safe .
Thank you for your info and the foresight
Thank one of the comments on ripping chain I’ll be doing oak maple. Been back and forth on type of chain
Much appreciated
Thumbs up brother, So many great tips and content.
Great to learn from your trial and error and pass on the knowledge so others can avoid problems.
Solid setup, clear speaking and good audio,, not rambling, tons of great info packed into the video.
Too many UA-cam videos try to stretch out something and go on an on. You ROCK bro, keep up the great work and it's always great to see people who enjoy the great outdoors.✅✅✅
Have the same mill (minus the winch). Absolutely love your starting set up. I used an old aluminum ladder what I don't use for climbing anymore. Boy does your set up look easy. I used a Stihl 029 super to mill 900 board foot of black cherry. The trees were dying and I didn't want firewood. My neighbor who is in construction and I weren't sure the saw would make it with that much cutting. I went through two ripping chains to get it all done. It was very satisfying to successfully do something I never did before. Great neighbor and I shared some of my lumber with him. It's just about dry now and I can start using it for projects in the mountain house.
Have you tried or done quarter sawing with the set up yet?
What an enjoyable and extremely helpful adventure you guided me on. Thank you so much. This is the one video that has now convinced me that I can do this, and surely enjoy the journey much like you have. You covered the details and concerns I had perfectly. Cheers... 8^)
Very informative. Thank you for sharing this and taking the time to explain everything. I’ve been wanting a chainsaw mill.
Subbed to both of you off the value of this one video alone! (Not really, been binging the content) This is pure gold.
Thanks for detailing out the centering and chain type and sharpening method. Super helpful
I emulated your set up with some minor variations and can tell you it's kickass! I bought full 20' sticks of square stock and cut it at 8-12... ive fabricated an internal bar to mate them for long slabbing... helps reduce flex too! Thabk you!
Excellent video. I'll probably never use a chainsaw mill but I now feel I can confidently baffle them with my bullshit down at the local tavern.
Hi Ryan! I've been looking at the G-777 and the G-778...I'm kinda leaning towards the G-778 because it offers a second point of attachment on the chainsaw bar. I run a Stihl 291 with a 20" bar, the G-778 is meant for a 24" bar but it looks like you can adjusted it down to a 20" Bar. Have you had any issues with the G-777 at all? And would you buy the same model again? Thanks for your channel great learn avenue! THX Nick