Yamaha V Star 950 Stator & Crankshaft Position Sensor Replace
Вставка
- Опубліковано 31 тра 2023
- Was sputtoring, wouldn't take wide open throttle, replaced the stator and crankshaft position sensor. Did sell the bike and the new owner fixed the issue with a set of hotter burning plugs and ran several cans of sea foam through it. Is running fine now. Main purpose of video is to help anyone needing to replace stator and crankshaft position sensor. Hope it helps someone.
- Авто та транспорт
This video saved me from throwing the whole bike away! THANK YOU AND MAY THE LORD BLESS YOUR SOUL PARTNER 🫡
Cara, muito bom! É difícil encontrar videos de manutenção da XVS950. Obrigado. Paulo, do Brasil
Yamaha5S7-13971-00-00 между этой деталью надо поставить фильтр тнкой очистки (разрезать шланг и между поставить фильтр),Between this part you need to put a fine filter (cut the hose and put the filter between)
доброе время дня.была точно такаяже проблема.это классическая проблема из за того,что фильтр тонкой очистки забился и он находится в сборе с бензонасосом,не путать с сеткой грубой очистки ,позже напишу где находится фильтр тонкой очистки и его надо вывесте отдельно под бензобак.Good afternoon. I had exactly the same problem. This is a classic problem due to the fact that the fine filter is clogged and it is assembled with the fuel pump, not to be confused with the coarse mesh, later I will write where the fine filter is located and it must be taken out separately under the gas tank .
Where is this second filter? I’m having the same issues?
Yamaha 5S7-13907-00-00 верхняя часть этой детали,она не обозначена никак.попробуйте продуть,продуватся будет плохо,а должно без припятственно.The upper part of this part, it is not marked in any way. Try to blow it out, it will not blow through well, but it should be without any obstructions.
Throttle Position Sensor?
не возможно вставить фото,it is not possible to insert a photo
фото