This helped me fix my hand mixer. The pin connecting the speed control switch came off. Didn't know how to open it without breaking the clips. But, your video helped me take it apart without breaking any clips. I think the switch assembly is a little different from the model shown in the video. Puttng the pin back in place was a little tricky. But, I was able to do it with the help of my wife's smaller hands. Now it's working great👍 Thanks a lot 😊
Nice work! Thats why I love UA-cam, there is so much knowledge! But you do have to dig through all the non relevant videos on that topic, that sadly are in a ratio of 10:1 :))))
Same here! I got a slightly different model from a friend for free who didn’t bother to look into it after 2 months of use. Thanks to your video, I opened it, found the dislocate metal piece controlling the speed, put it back together again and it works! Once less thing in the landfill! Thank you!
这个视频非常有帮助，它很好地指导我怎样拆开机器的外壳。非常感谢！ This video was very helpful, it did a good job of guiding me how to take apart the case of the Hand Mixer. Thank you very much !
This was helpful. Thank you. Not complaining, but we did miss seeing a lot of what you did inside the handle, with the controls in it, because it was out of the picture, at the top, a large portion of the time.
thanks for the feedback and sorry about that. there is still a lot to improve. and this video is one of the first.. hope new ones will not have these issues..
@@letsfixitgarage Thanks again. No problem. For myself, I wouldn't even be working on one, but women stay sentimental over gifts, from their children, and she asked me to fix it. Without information like yours, it is difficult to figure out how to get into it, without tearing it up. You saved me from making that mistake. She has stripped out beater drive gears, both of them.
i'd be curious if you get a kitchenaid cordless had mixer in your hands and see what kinds of internals is has. If the motor is brushless and what battery size and type.
Sorry don't have a suggestion for you.. didn't need to look for KitchenAid spare parts till now.. hope someone will coment with some suggestions.. good luck
I do have same problem, did you fix it? I disassembly whole unit into parts but dont have clue where is the problem, after 5 seconds it stops and thats it:/
@@EpicMomentsForLife if I'm not mistaken the part that replaced is the capacitor it's been long ago i already forgot but do check that parts hope can help
1 smack with a rubber hammer popped the silver cover off mine. Removed the 2 screws then another whack opened the main case. Still scrapped the machine as the electronic control had gone AWOL.
Yes.. I was also not able to push that part apart with my hands. Then I saw this comment and gave a small hit with a rubber hammer and was able to take it apart without any damage to the clips. 👍 Thanks for sharing your experience 🙂
Hi! My wobbles terribly and it's brend new... I'm sooo disappointed... I'll have to open it myself as we bought it abroad while on winter holidays, on some Christmas sale... I guess Europe and American models are very far apart.
They disguise that KitchenAid handmixer to look much better than it is! Yet it has creaky plastic & crappy plastic gears!! There’s not even grease on the gears!! So you’re better off with a cheaper one!
@@letsfixitgarage Except from all the noise of the clinking and the motor. I don’t think you’ll really hear the gears if they’re plastic or metal and greased! You’d have to go back quite a ways in the US to get the metal gears. They should certainly be greased.
This helped me fix my hand mixer. The pin connecting the speed control switch came off. Didn't know how to open it without breaking the clips. But, your video helped me take it apart without breaking any clips.
I think the switch assembly is a little different from the model shown in the video. Puttng the pin back in place was a little tricky. But, I was able to do it with the help of my wife's smaller hands.
Now it's working great👍
Thanks a lot 😊
Nice work! Thats why I love UA-cam, there is so much knowledge! But you do have to dig through all the non relevant videos on that topic, that sadly are in a ratio of 10:1 :))))
Same here! I got a slightly different model from a friend for free who didn’t bother to look into it after 2 months of use. Thanks to your video, I opened it, found the dislocate metal piece controlling the speed, put it back together again and it works! Once less thing in the landfill! Thank you!
Same here. The pin fell off. Funny how such a small thing can mess up a lot of mixers and probably fill up landfills (like the other person said)
Thanks a lot, helped to disassemble and fix my wife's mixer
这个视频非常有帮助，它很好地指导我怎样拆开机器的外壳。非常感谢！
This video was very helpful, it did a good job of guiding me how to take apart the case of the Hand Mixer. Thank you very much !
Thanks for your feedback and I'm happy it was helpful!
This video helped me fix my handmixer - thank you so much!
Thanks for your comment, glad it was helpful 👍
thanks! big help in trying to figure out HOW to get into the mixer!
This was helpful. Thank you. Not complaining, but we did miss seeing a lot of what you did inside the handle, with the controls in it, because it was out of the picture, at the top, a large portion of the time.
thanks for the feedback and sorry about that. there is still a lot to improve. and this video is one of the first.. hope new ones will not have these issues..
@@letsfixitgarage Thanks again. No problem. For myself, I wouldn't even be working on one, but women stay sentimental over gifts, from their children, and she asked me to fix it. Without information like yours, it is difficult to figure out how to get into it, without tearing it up. You saved me from making that mistake. She has stripped out beater drive gears, both of them.
i'd be curious if you get a kitchenaid cordless had mixer in your hands and see what kinds of internals is has. If the motor is brushless and what battery size and type.
Sorry don't have it on hand..
What do you think, where can i buy black plastic speed counter with one magnet in the midle. Its for rev counter if i am right. Thank you
Sorry don't have a suggestion for you.. didn't need to look for KitchenAid spare parts till now.. hope someone will coment with some suggestions.. good luck
Grat desde chile me sirvió de mucha ayuda
Where could I find gears for this model? Those hollow ones, that beaters run through.
thats always difficult... if kitchenaid support is not able to provide it im afraid you are out off luck..
I want to ask I have similar mixer but the mixer just turn on for like 5 second and turn off do you know what the problem is? Thx
Haven't had that kind off problem..I would suspect problem on the board.. but for that a closer inspection is needed..
I do have same problem, did you fix it? I disassembly whole unit into parts but dont have clue where is the problem, after 5 seconds it stops and thats it:/
@@EpicMomentsForLife if I'm not mistaken the part that replaced is the capacitor it's been long ago i already forgot but do check that parts hope can help
@ Thank You so much🥰
This is so hard to open, I can't get that first silver plastic piece off
1 smack with a rubber hammer popped the silver cover off mine. Removed the 2 screws then another whack opened the main case. Still scrapped the machine as the electronic control had gone AWOL.
Edit. Thought that the comment was on another video :D it seams that electronics are the weak side of this thing.. had problems with mine too..
Yes.. I was also not able to push that part apart with my hands. Then I saw this comment and gave a small hit with a rubber hammer and was able to take it apart without any damage to the clips. 👍
Thanks for sharing your experience 🙂
Hi! My wobbles terribly and it's brend new... I'm sooo disappointed... I'll have to open it myself as we bought it abroad while on winter holidays, on some Christmas sale... I guess Europe and American models are very far apart.
are they different in appearance or internals?
They disguise that KitchenAid handmixer to look much better than it is!
Yet it has creaky plastic & crappy plastic gears!!
There’s not even grease on the gears!!
So you’re better off with a cheaper one!
Quality plastic in its calculated loads is better than Steel.. it's much quieter..
@@letsfixitgarage Except from all the noise of the clinking and the motor. I don’t think you’ll really hear the gears if they’re plastic or metal and greased!
You’d have to go back quite a ways in the US to get the metal gears.
They should certainly be greased.
Be nice if you were in camera range to see everything you are doing
Sorry about that. I try to improve myself in future videos, but when something is stuck it's very difficult to stay in shot..