wow amazing Sergio! thank you for doing this tutorial. is there anyway you can show the whole process for the paint process? like how do you get sharp lines and how do you erase if you go a little too far?
Yes, if it's a video where you can easily change the sky, it's better to change it, you save quite a bit of work, in the video of the towers in the intro I did it that way.
I usually don't share the tutorial content because I often use videos from paid websites, and obviously, I can't share that material. But in this case, the example is from a free website, it's from Pexels. I'll try to find the link to the video, and if I find it, I'll share it with you.
Honestly speaking I did it in after effects as a beginner. I know the tutorial you made is awesome and I appreciate it but I simply made the parts of building 'layer' with selection tool in Photoshop, imported it in after effects and applied position and motion blur... saved it as MP4 a few more touches and it gives the same effect
Of course, there are many ways to achieve the same effect with other programs and even with Davinci Resolve. The steps you mentioned can also be done in Davinci Resolve without using Fusion. For example, in this tutorial, I do everything in a simple way in the editing and color module, which maybe isn't as intimidating as Fusion, haha : ua-cam.com/video/l5mVdniO3SY/v-deo.htmlsi=J1IWFOulscUASqKT
what 's the version do you use ? I do exactly the same thing, it's completly diffferent. The "draw of different floors", change at the end. the same thing with command like "merge". You can command the " move in different place" with merge, i have the 18.6.3, and it 's not possible.
The tutorial was recorded using the free version, version 18.5. What you mentioned about the masks changing position at the end sounds like it could be a Fusion bug. The masks should be from the area you select. For cases like these, I always recommend asking in forums or Facebook groups to find people who may have experienced similar issues.
@@SergiomotaENG I draw the first floor, I zoom in, I do "Ctl-C" and "Ctl-V" for the next floor, I modify a little bit. But at the end when, Remove each floor from the base, every floor are more little than the initial draw. and as I said, you remove every floor from "Merges", and I , with Polygon. i m really sad,! your tutorials are extra !
It will be really cool, if you make this footage available as a link As a beginner i can learn to make exact replica of yours Please try to place link of the footage It is really appreciable Hope you consider my request As always Love your content from India❤ Thank you
Of course! I've already added your channel to the video description. Best regards!
Рік тому+1
Thanks for the video. Years ago I could do this so easy on after effects, now that I’m starting to use Resolve and Fusion…. Geh… it feels to me that nothing makes sense anymore 😅 It’s like relearning to walk or something
@@SergiomotaENG you're right, my bad. And what's your take on getting the Studio version? I think the one time fee is so worth it for people who edit on a regular basis, just for things like Magic Mask. It saves soooo much time.
I know Fusion can be intimidating, but in the end, it's not that difficult. Nonetheless, there are other ways to do it much simpler. Maybe in the future, I'll create a more straightforward version of this tutorial and share some tricks.
@@SergiomotaENG Simpler is usually better! I'm not sure why you would teach a more advanced version intentionally when there is a simple way? This one was too advanced for me as well. Love your channel, thanks for the content.
@Shaybly1 When I do them in a simpler way in the editing and color module, some people say, 'Why don't you do it in Fusion?' There are very strict people and all kinds of people on the internet, including those who comment that the tutorial is garbage because it's not in Fusion.😅 Yes, I confirm that there are people like that haha In the end, I've learned that it's better not to pay attention to the comments because no matter what I do, it's never going to please everyone. In summary, I make some tutorials simpler and others more advanced, but I usually do it as simple as possible.
![3D Building GROW EFFECT - Premiere Pro Tutorial [Benn TK]](http://i.ytimg.com/vi/x_RsGFXjP-k/mqdefault.jpg)
👉Edit your photos with AI : skylum.evyy.net/AI
Use the code 'mota' to get a 10% discount!
Man....I can't even make a simple could formation. Simply a great video and very well explained. Need to know in-depth knowledge.
i tell you bro
I was searching for this for so long ,
Thank you and keep making this tutorials they are really helpful ❤
Thank you for your support and for watching the videos! ^^
You help many people in everywhere in the world! Thanks from Brazil!
Thank you very much for those kind words! ^^ By the way, I also have the channel dubbed in Portuguese: youtube.com/@SergioMotaPT?si=qNuK7VFCZTY96_Xs
Amazing tutorial. However, could you do a follow up perhaps with motion tracking? Is that possible? Thank you so much for this,
thank you for sharing 🙏🙏🙏
Great tutorial, thanks !!
Me encantaa!, que buen video, por fin alguien haciendo esto en davinci, todos con sus tutoriales de After :(
Gracias por el tutorial brother
Would be amazing if you could show how to do the effect at 0:08 - 0:11
Your content is amazing,glad i found your channel
wow amazing Sergio! thank you for doing this tutorial. is there anyway you can show the whole process for the paint process? like how do you get sharp lines and how do you erase if you go a little too far?
One conclusion for BMD- We need a generative fill asap. Thanks
Object removal tool best I got
ohh mann... why there is no teacher like you in my country region, this teaching technique is so simple easy !!!
- Thanks
Thank you so much, so could you share original video for practice.
Oh good u r amaaaaziiing 🎉❤❤
Really cool effect. Like it!
If cloning a timelapsed cloudy sky seems tough, alternatively just key out the sky and add a new timelapsed sky under the keyed clip.
Yes, if it's a video where you can easily change the sky, it's better to change it, you save quite a bit of work, in the video of the towers in the intro I did it that way.
WELL YOU HAVE MORE THAN 70 THOUSAND NOW 👑👑
Great tutorial, thank you
Soo helpful!
Thank you very much!
Can I do it in the free Version?
Yes, everything used in this tutorial is from the free version, including the Motion Blur at the end of the video.
Thats great ❤@@SergiomotaENG
Thank you Mr Sergio, WHy do you start animating from right to left? Do i have to keep this order for all animations?.
Annnnnd subscribed 😊
2:53 // renaming alll the nodes took you so long the Sun started going down in a picture LOL
Great tuto 😊
Thank you very much eYACTION!! 😃
This Very Simple And cool effect
...Nice...
Thank you, Jamie! It's great to see you here 😀
Bro how can we do this without using planer tracker, you showed moving videos in intro and made tutorial of steady video
clone gone, and then click clone again ? I don't understand that part . thx 4 the vid.
thank you! I'm going to use this for a 6 second intro I'm sure it would have taken me an hour or two to figure it out ;) lol !
bruh, my laptop will just explode at this point 🤣
Thank you very mucho
My clone tools turns red ones i press to paint, and it wont paint anything... you know what it could be?
please share this raw footage , with this we can practice this tutorial on this video by ourself
I usually don't share the tutorial content because I often use videos from paid websites, and obviously, I can't share that material. But in this case, the example is from a free website, it's from Pexels. I'll try to find the link to the video, and if I find it, I'll share it with you.
can u please provide the material so we can follow along
🔥 thanks bro 😎
wow .thanks
I can’t seem to be able to do this on my iPad Pro. Is that correct?
How to do that effect from counter strike?
Honestly speaking I did it in after effects as a beginner. I know the tutorial you made is awesome and I appreciate it but I simply made the parts of building 'layer' with selection tool in Photoshop, imported it in after effects and applied position and motion blur... saved it as MP4 a few more touches and it gives the same effect
Of course, there are many ways to achieve the same effect with other programs and even with Davinci Resolve. The steps you mentioned can also be done in Davinci Resolve without using Fusion. For example, in this tutorial, I do everything in a simple way in the editing and color module, which maybe isn't as intimidating as Fusion, haha : ua-cam.com/video/l5mVdniO3SY/v-deo.htmlsi=J1IWFOulscUASqKT
I don't understand the point of your comment. Are you really surprised that more than one program can do the same thing
Cool story.
How i can do in moving video 😢
IS THIS FOOTAGE AVAILABLE FOR DOWNLOAD ?
what building is this
That is Taipei 101 in the first example!!!!
Do we need the studio version for this?
No, it's all free
what 's the version do you use ?
I do exactly the same thing, it's completly diffferent.
The "draw of different floors", change at the end.
the same thing with command like "merge".
You can command the " move in different place" with merge, i have the 18.6.3, and it 's not possible.
The tutorial was recorded using the free version, version 18.5. What you mentioned about the masks changing position at the end sounds like it could be a Fusion bug. The masks should be from the area you select. For cases like these, I always recommend asking in forums or Facebook groups to find people who may have experienced similar issues.
@@SergiomotaENG I draw the first floor, I zoom in, I do "Ctl-C" and "Ctl-V" for the next floor, I modify a little bit. But at the end when, Remove each floor from the base, every floor are more little than the initial draw.
and as I said, you remove every floor from "Merges", and I , with Polygon.
i m really sad,!
your tutorials are extra !
i am unable to clone 9:38
... please help
same
It will be really cool, if you make this footage available as a link
As a beginner i can learn to make exact replica of yours
Please try to place link of the footage
It is really appreciable
Hope you consider my request
As always
Love your content from India❤
Thank you
You did a nice tutorial with my video. Some credit or a link in the description would have been nice.
Of course! I've already added your channel to the video description.
Best regards!
Thanks for the video. Years ago I could do this so easy on after effects, now that I’m starting to use Resolve and Fusion…. Geh… it feels to me that nothing makes sense anymore 😅
It’s like relearning to walk or something
i feel the same
Sheesh there’s so many crazy things you can do with this software
we can even do this in Adobe Premier Pro
But its not free😂
Hmm thats true hehe@@jaci6625
super
🔥🔥🔥🔥🔥
💥⚡⚡💥
Why don’t you just magic mask it?
Because the title says Davinci Resolve free, to use Magic Mask, the Studio version is required.
@@SergiomotaENG you're right, my bad. And what's your take on getting the Studio version? I think the one time fee is so worth it for people who edit on a regular basis, just for things like Magic Mask. It saves soooo much time.
IT IS TOOO LARGE PROCESS I PREFER USE AFTER EFFECTS MOST EASY
Taipei 101🇹🇼🇹🇼🇹🇼
TAIWAN
牛批
Interesting but this is skill level is to mutch for me
I know Fusion can be intimidating, but in the end, it's not that difficult.
Nonetheless, there are other ways to do it much simpler. Maybe in the future, I'll create a more straightforward version of this tutorial and share some tricks.
@@SergiomotaENG Simpler is usually better! I'm not sure why you would teach a more advanced version intentionally when there is a simple way? This one was too advanced for me as well. Love your channel, thanks for the content.
@Shaybly1 When I do them in a simpler way in the editing and color module, some people say, 'Why don't you do it in Fusion?'
There are very strict people and all kinds of people on the internet, including those who comment that the tutorial is garbage because it's not in Fusion.😅
Yes, I confirm that there are people like that haha
In the end, I've learned that it's better not to pay attention to the comments because no matter what I do, it's never going to please everyone.
In summary, I make some tutorials simpler and others more advanced, but I usually do it as simple as possible.
Taiwan🔥