Brilliant. I'm in the US with a -042 type 2 Plus Medallion which is in great working shape and now 30 years old. It was just another tool for decades but now I've come to love that thing. I'm in the midst of replacing the water damaged tops with proper plywood and adding the lost middle plank, but you've gone miles beyond that! Thanks for the interesting ideas to add to mine as well.
Thanks, I have a few videos on mids you can do to the workmate changing the top is on my list, but the top still works so I'm loathed to make new ones just fir the sake if a video! Thanks for watching 👀 🙂
Nice!! Way to make a tool your own with mods. Good Job. You definitely make a the most of your workspace and are an inspiration to other that they can do more as well. Thank you for making this video and keep up the good work. I know you did this a while ago but you did good work then and it holds up today.
Good idea with the extension! My workshop has an electrical socket in the centre of the ceiling. I plug an extension into that then clip it to a rafter so that Ican pull it down to use - no trailing leads on the floor.
brilliant. I bought a house that strangely has three workbenches. But I love my little workmate to take outside and make garden beds, etc. it's just too handy! Thanks for those tips because I've never really had a solution for the bench dogs or tools. :-)
Thanks for a great video. Enjoyed seeing all your well thought-out mods. Something to aspire to esp. the power mate attachment. I couldn't see a link to the clips/brackets you mentioned at the end of the video to holding the long soft rubber clamp covers. Can your reshare the link please?
Cracking mods to your Workmate and seriously clever to have them built to not interfere with the everyday use and also the fold, which is some achievement... 👏🏻 Thank you for sharing these, a couple of which I have attempted on mine (the easier/more simple ones first!) and others I will be keen to add when we finally move into our new home and I can properly sort the garage into a workshop... 👍🏻 I will look forward to seeing the further mods you mentioned and have sub’d already... 😉
@@DIYTinkerer well I got on Craigslist and just picked up a 425 in good condition for $20! I’ll put my 300 up for $20 too and probably just give it away to whoever wants it.
In your opinion, do you believe it is practical to drill out all of the rivets holding my B&D Workmates 626 together and replace them with nuts and bolts?
So I've not had any need to replace the rivets, I assume you mean the rivets used on the folding mechanism, having had a quick look, I'd say you need to be careful with the clearance if using nut and bolts, as it looks like the folding mechanism has to pass some of them. Also you would need to consider how you prevent them from coming loose. But the biggest concern would be if it will fold up afterwards, so check those clearances first!
Really inspiring mods - well thought out. I have a problem with my WorkMate 536, it does not hold steel conduit firmly enough when tapping threads - the conduit rotates. Any ideas on how to fix that?
The main jaw has a v along its length for pipes, if this can't provide enough grip then you could try supplimenting the grip with some thin rubber sheet such as a bit of old bike inner tube, you could try the same with the bench dogs which also have a v on them for pipes
This is brilliant! I thought I had seen every modification possible for these things, and there you are, you've come up with new ideas! Where do you get the paper of the correct width?
Really nice. I’m on the hunt for an elegant solution for repairing/ replacing a workmate folding leg that’s long gone. If I find anything I like I’ll share but if you happen to do it then I’ll be interested in seeing what your come up with. Thanks for the material.
What I do is add some weights to the metal step - this makes a big difference - you can probably spy them in some of my other videos. I've also seen someone who screwed the workmate to a OSB sheet so they stand on the sheet when planing which is also attached to the workmate - but sometimes you just need a woodworking bench...
Hello, I liked the updated Workmate mods that you did. Your panel supporting the vice, did I see correctly you mounted the metal 'buttons" for locking the panel into the rear slots? Where did you get your metal locking buttons? Thanks and have a good day.
Hi John, glad you liked them, the vice uses M12 bolts, these fit like the locking buttons, the hex head has to be parallel to the slot in the frame, to fit through the wide part of the slot and the shaft of the bolt fits the narrow part of the slot in the frame, they act just like the buttons.
Great video and very useful modifications - I look forward to giving some (maybe all) of them a go...thank you!
I'm glad you like them, 👍
Lovely video- I was just gifted a Workmate. The community around modding them is inspiring.
Hi, thanks for the comment, I'm glad you liked the video. Workmates have a special kind of appeal :-)
Genius, just bought my first bench (Workmate 301) and found this video very useful and full of great ideas!
Great to hear! Glad it was useful, I have a fair few Workmate videos, so be sure to subscribe 👍🏻
Brilliant. I'm in the US with a -042 type 2 Plus Medallion which is in great working shape and now 30 years old. It was just another tool for decades but now I've come to love that thing. I'm in the midst of replacing the water damaged tops with proper plywood and adding the lost middle plank, but you've gone miles beyond that! Thanks for the interesting ideas to add to mine as well.
Thanks, I have a few videos on mids you can do to the workmate changing the top is on my list, but the top still works so I'm loathed to make new ones just fir the sake if a video! Thanks for watching 👀 🙂
i gasped at the lining paper reveal. well done!
Thanks, glad you liked it
Nice!! Way to make a tool your own with mods. Good Job. You definitely make a the most of your workspace and are an inspiration to other that they can do more as well. Thank you for making this video and keep up the good work. I know you did this a while ago but you did good work then and it holds up today.
Thank you very much for your kind words. I am glad you are enjoying the videos!
Very clear and brief, leading to further detailed videos if construction details are required
Thanks I'm glad you liked it.
Good idea with the extension!
My workshop has an electrical socket in the centre of the ceiling. I plug an extension into that then clip it to a rafter so that Ican pull it down to use - no trailing leads on the floor.
That's an awesome idea, I've considered this a few times but never got round to doing.
Inventive, practical and helpful mods! Hats off to you! I especially liked the 'Powermate'. All the best, Rob
Thanks for the feedback, be sure to subscribe so as to not miss any of my other workshop videos.
Concise, competent cheerful. Creativity, well done. Thank you, sir.
Thanks for your kind words 😀
Great product. Easy to carry, setup, very sturdy and easy toctake down. Worth the extra couple of dollars.
Couldn't agree more!
Very quick and to the point. Thanks for making this video.
You're welcome!
Great stuff! So simple but so effective - well done and thank you.
Thanks for you kind comments, be sure to check out my other workmate mods! :-)
Damned clever. Well done, sir!
Thanks, glad you liked it 😀
Awesome upgrades to the workmate...!
Thanks, I'm glad you like them 🙂
Very well done, your workbench modifications, and your video.
Thank you very much!
These are awesome mods, very glad you made this video
Glad you like them! Be sure to checkout my other workmate mods
Absolutely perfect
😊
brilliant. I bought a house that strangely has three workbenches. But I love my little workmate to take outside and make garden beds, etc. it's just too handy! Thanks for those tips because I've never really had a solution for the bench dogs or tools. :-)
I'm glad you liked it. It's worth checking my whole series on workmate modifications.ua-cam.com/play/PL3WIBjRzYExe8rur9uJkQzrz0GY4dM428.html
Good job. Very thoughtful and applicable
Thank you, I'm glad you like it, thanks for letting me know!:-)
Great video I'm off to the shed now..??? Oh must buy this work bench cos my old one is beat. Looking forward to watching your other videos. Cheers
Thanks 👍be sure to subscribe if you haven't already!
excellent,well thought out modifications
Thanks Gaz, I appreciate your feedback.
Thanks for a great video. Enjoyed seeing all your well thought-out mods. Something to aspire to esp. the power mate attachment.
I couldn't see a link to the clips/brackets you mentioned at the end of the video to holding the long soft rubber clamp covers. Can your reshare the link please?
Hi sorry I must have forgot, here it is www.thingiverse.com/thing:4573155 hope it works for you, mines been on the workmate quite a few years now!
Thank you very much!! I needed this video👍👍
Glad it was helpful!
Cracking mods to your Workmate and seriously clever to have them built to not interfere with the everyday use and also the fold, which is some achievement... 👏🏻
Thank you for sharing these, a couple of which I have attempted on mine (the easier/more simple ones first!) and others I will be keen to add when we finally move into our new home and I can properly sort the garage into a workshop... 👍🏻
I will look forward to seeing the further mods you mentioned and have sub’d already... 😉
Thanks, good luck with the move and your new workshop :-)
Good ideas, sir. Thank you for sharing.
Thanks Thomas, glad you liked them.
I love the powermate! Can you please tell me more, esp about the mounting plate
I've detailed how I made it in this video ua-cam.com/video/33PdEesu20E/v-deo.html - enjoy
I wish mine had the flip up front jaw that’s cool.
Cool, but in almost 30 years I've only used them a couple of times!
@@DIYTinkerer yeah but you have room to easily build those mods into yours. I’ll have to see if I can with my wm300.
@@DIYTinkerer well I got on Craigslist and just picked up a 425 in good condition for $20! I’ll put my 300 up for $20 too and probably just give it away to whoever wants it.
B&D need you as an advisor...
Ha, I could certainly offer a few updates:-) thanks!
Great mods , what model workmate is that?
Hi, its 30 years old, and a bit beat-up but I'm reasonably sure it is a 425 model.
Really clever to be honest 👌👌
I'm glad you like them 😀
In your opinion, do you believe it is practical to drill out all of the rivets holding my B&D Workmates 626 together and replace them with nuts and bolts?
So I've not had any need to replace the rivets, I assume you mean the rivets used on the folding mechanism, having had a quick look, I'd say you need to be careful with the clearance if using nut and bolts, as it looks like the folding mechanism has to pass some of them. Also you would need to consider how you prevent them from coming loose. But the biggest concern would be if it will fold up afterwards, so check those clearances first!
Grande lavoro e grandi idee! Bravissimo!
Thank you so much for your kind words. 😀
Really inspiring mods - well thought out. I have a problem with my WorkMate 536, it does not hold steel conduit firmly enough when tapping threads - the conduit rotates. Any ideas on how to fix that?
The main jaw has a v along its length for pipes, if this can't provide enough grip then you could try supplimenting the grip with some thin rubber sheet such as a bit of old bike inner tube, you could try the same with the bench dogs which also have a v on them for pipes
@@DIYTinkerer yes, neither have enough grip as-is. Rubber sheet is worth a try, thank you.
This is brilliant! I thought I had seen every modification possible for these things, and there you are, you've come up with new ideas! Where do you get the paper of the correct width?
The paper is wallpaper lining paper, I have a full video on the paper dispenser, it's a great mod. Glad you liked it.
Hi! Nice mods! Do you remember what is the model of this workmate when it was purchased?
Hi, it is the Black and Decker WorkMATE 800, how that helps
Really nice.
I’m on the hunt for an elegant solution for repairing/ replacing a workmate folding leg that’s long gone. If I find anything I like I’ll share but if you happen to do it then I’ll be interested in seeing what your come up with.
Thanks for the material.
Is it the plastic spring thing that holds the leg open? If so these are available as spares on Amazon
Now, have you any thoughts on how to improve on lateral stability during handplaning?
Thanks
What I do is add some weights to the metal step - this makes a big difference - you can probably spy them in some of my other videos. I've also seen someone who screwed the workmate to a OSB sheet so they stand on the sheet when planing which is also attached to the workmate - but sometimes you just need a woodworking bench...
@@DIYTinkerer noted, thank you!
Awesome!!!!
Thanks!!
Cool stuff thx!
Thanks, Manny more mods on my channel, be sure to check it out of you haven't already :-)
Very cool.
I'm glad you like them 🙂
Great to find a channel using common UK DIY tools, I look forward to checking out your other videos and those to come.
Yep, just normal stuff the average person has in his shed/workshop
Ingenious 👍
what @caskwith said
Hello, I liked the updated Workmate mods that you did. Your panel supporting the vice, did I see correctly you mounted the metal 'buttons" for locking the panel into the rear slots? Where did you get your metal locking buttons? Thanks and have a good day.
Hi John, glad you liked them, the vice uses M12 bolts, these fit like the locking buttons, the hex head has to be parallel to the slot in the frame, to fit through the wide part of the slot and the shaft of the bolt fits the narrow part of the slot in the frame, they act just like the buttons.
What happened to the other mods?
Hi here is a play list for all of them ua-cam.com/play/PL3WIBjRzYExe8rur9uJkQzrz0GY4dM428.html&si=ArXf1tJu3W5pvCPG
excellent
Thanks glad you like them