So I figured out how to get in my dafe ,yours I would around conner of wall punch or cut out now a little battery cutting grinder from behind,if I were worried I'd box it in concrete and rubars every which way ,will be getting 1 going do a thing Fram and magnet have a nice day
i have a couple of these, they're really nothing more than a lock box- the only thing they have going for them is the concealment factor. The pins that lock the door are close together and positioned in the center of the door near the keypad- (FF to 7:50 for a visual of the door construction) this leaves the upper and lower outside corners of the door (left hand side if facing the safe) EASILY abled to be pried open. The door is fabricated from 3/16 steel it doesnt take mich effort at all to bend the corners outwards enough to stick a hand inside (using nothing more than a large flathead screwdriver) after doing so- the two "shelves" that are held in by plastic clips can be removed and all the valuables will fall to the bottom within reach. These are not very secure imho-
Roger Waldman I plan to remove the plastic keepers that hold the shelves in place and bolt them in for some added security. It will at least make whatever is placed on the middle shelf harder to get to if the corners are pried open.
No safe will stop someone truly determined from getting in. But your average break and enter is going to want a purse, a computer, an iPad... easy to pawn stuff. They will not be prepared to break into a safe. IF they discover it behind the concealing picture, they will likely not have the means to break into it anyway. No, it is not a bank vault, but some fool after a rolex to pawn is no master criminal either.
ROGER WALDMAN $100+ contract job probably even more just for the hole hahah more than the safe its self. Maybe thats why most average people don’t buy these in wall safe cause hiring a contractor just to dig a hole in the drywall cost an arm and leg 😂
Ain't a criminal dumb enough to fall for an electrical sticker bud. The wall safe is only a deterrent for 'smash and grab' theif. A well-prepared thief would have it out in under two minutes. They would just bring a circular saw. Overall the wall safe is a super-easy way to protect your valuables.
MAKE SURE YOU HAVE A CARBIDE TO CUT THE STEEL / METAL STUDS AND ANGLE IRON WELDED TO THE SAFE /OR A CUTTING TORCH . I DON'T THINK IT WOULD BE WORTH ALL THAT TO GET MY BIRTH CERTIFICATE AND MY PASSPORT . BUT WHO SAID THIEVES ALWAYS HAVE A GOOD PLAN ?
LOL I should have been more specific sorry. Most sales if not all from prime are only single stickers in the basic 3x5 size?. Just wanted to know if he got his 2 or more at a good rate from prime which I really only like dealing with. Many other sellers promise to deliver on a specific date and well good luck getting it. Thanks anyway. 👍
the key opening is the weak link. they make common keys that can open these. the lockpicking lawyer shows how to break into these safes quickly. concealment is the only real "safe" part about it. hoping the thieves dont find it.
The install was so fast I didn't even see it
next time !
So I figured out how to get in my dafe ,yours I would around conner of wall punch or cut out now a little battery cutting grinder from behind,if I were worried I'd box it in concrete and rubars every which way ,will be getting 1 going do a thing Fram and magnet have a nice day
TY ! GREAT TIPS !
Thanks for the print idea
Most welcome 😊
I had one of these and it worked great.
Good to hear
THANKS FOR THE COMMENT ! MUCH APPRECIATED !
i have a couple of these, they're really nothing more than a lock box- the only thing they have going for them is the concealment factor.
The pins that lock the door are close together and positioned in the center of the door near the keypad- (FF to 7:50 for a visual of the door construction) this leaves the upper and lower outside corners of the door (left hand side if facing the safe) EASILY abled to be pried open.
The door is fabricated from 3/16 steel it doesnt take mich effort at all to bend the corners outwards enough to stick a hand inside (using nothing more than a large flathead screwdriver)
after doing so- the two "shelves" that are held in by plastic clips can be removed and all the valuables will fall to the bottom within reach.
These are not very secure imho-
Ya they are not super secure but save my ass many times
Roger Waldman
I plan to remove the plastic keepers that hold the shelves in place and bolt them in for some added security.
It will at least make whatever is placed on the middle shelf harder to get to if the corners are pried open.
No safe will stop someone truly determined from getting in. But your average break and enter is going to want a purse, a computer, an iPad... easy to pawn stuff. They will not be prepared to break into a safe. IF they discover it behind the concealing picture, they will likely not have the means to break into it anyway. No, it is not a bank vault, but some fool after a rolex to pawn is no master criminal either.
Are the two shelves removable?
YES THEY ARE ! THANKS FOR ASKING !
You can open that safe in 30 sec with a good crowbar. Don’t fool yourself.
THANKS FOR COMMENT
Can you reverse the kepad if you want the door to open from left to right?
I dont think so . But i will check asap
@@ROGERWALDMAN Thank you.
One way only
@@ROGERWALDMAN Tnx for the info.
@@djnitor Hang it upside down to change door for a right or left side door.
$69 box for to make a hole lol. Not $69 for safebox plus installation
I DIDN'T CHARGE MYSELF . BUT I SHOULD HAVE . IT WAS A PAIN IN THE TAIL ..! LOL !
ROGER WALDMAN $100+ contract job probably even more just for the hole hahah more than the safe its self. Maybe thats why most average people don’t buy these in wall safe cause hiring a contractor just to dig a hole in the drywall cost an arm and leg 😂
You could literally use a butter knife and do it-but I have gone with a steak knife for ease
Was thinking of picking this up until people said they can open it In seconds by banging on it. Looks good tho
I wish I could get into mine in seconds I got locked out and cannot seem to get in even with a hammer..! They must have got a lemon 🍋
You can’t open it in a few sec
The small portable model. Not this one.
You can make the safer by covering the program button
PATREON LINK TO CHANNEL ua-cam.com/channels/FSzgSuomZ2SbrUtHg9gHLw.htmljoin
Ain't a criminal dumb enough to fall for an electrical sticker bud.
The wall safe is only a deterrent for 'smash and grab' theif. A well-prepared thief would have it out in under two minutes. They would just bring a circular saw.
Overall the wall safe is a super-easy way to protect your valuables.
A CHAINSAW WOULD BE BETTER ! LOL !
MAKE SURE YOU HAVE A CARBIDE TO CUT THE STEEL / METAL STUDS AND ANGLE IRON WELDED TO THE SAFE /OR A CUTTING TORCH . I DON'T THINK IT WOULD BE WORTH ALL THAT TO GET MY BIRTH CERTIFICATE AND MY PASSPORT . BUT WHO SAID THIEVES ALWAYS HAVE A GOOD PLAN ?
@@ROGERWALDMAN Forget that ill just bring my excavator lol
Where do you buy your stickers?
AMAZON ! JUST LOOK AT DANGER AND ELECTRICAL WARNING STICKERS ON AMAZON !
LOL I should have been more specific sorry. Most sales if not all from prime are only single stickers in the basic 3x5 size?. Just wanted to know if he got his 2 or more at a good rate from prime which I really only like dealing with. Many other sellers promise to deliver on a specific date and well good luck getting it. Thanks anyway. 👍
Smart.
THANK YOU
the key opening is the weak link. they make common keys that can open these. the lockpicking lawyer shows how to break into these safes quickly. concealment is the only real "safe" part about it. hoping the thieves dont find it.
THANKS
www.patreon.com/ROGERWALDMAN
ua-cam.com/channels/FSzgSuomZ2SbrUtHg9gHLw.htmljoin
Inconspicuous sure, but a "lot of time" to get into it is definitely false. Flathead screwdriver could pry it open in seconds.
Make a video
Video???? That’s what I thought.. more fake news. If true make a video of you doing it at the HF store.
Would like to see you try.
@@greatone6353 lol i could open this in less than 30 seconds with a bic pen.
@@chrisw7946 How, by writing to the company and getting the code numbers?
This unit does not come with very good directions.
I AGREE
amzn.to/3nkb4dL