I do have one that’s a pretty detailed. Shows how to replace the hydraulic accumulators, bleed the fluid, and change the fluid. Here ya go. ua-cam.com/video/kyhXTL4629M/v-deo.html
@@haildrreaper Yup! For the 2008-2021 it is the same exact procedure. The mechanical components from 2008-2021 are almost the same. The main changes were the switch in transmission for the 2016-2021 years. The suspension and engine are nearly identical.
I've seen certain years of the GX and LX that have or don't have the RSCA OFF button. Not sure what reason is for it to come and go. The function of the RSCA OFF button is stop the side curtain air bags from deploying when the vehicle is at a severe tilt. Most people will never use it. But if you really need it for aggressive off-roading it might be worth looking into what it would take to add it.
I replace all my sensors and the light was on. I got Costco to relearn all the sensors and they confirm with me it was successful and light is off. I left happy but when I scroll over saw the dashes without reout. Drive an awhile and nothing. I did the reset light video and now had drove for awhile still won’t pick up the reading. Any suggestions? The warning light hasn’t come back on but the display still dashes with no reading. I figure if would starting reading by now since I just did a 8 hr trip. I would figure if sensors wasn’t program right the warning light would be on by now right? Thanks
If you’ve done all that they should be showing a reading. At this point you might need to take it into a Toyota or Lexus dealership so that they can hook it up to the Techstream computer and see what the issue is.
From what I read. That’s not a reset button. It’s a set button for if you go with tires that require more or less psi. Mainly for when you get new tires with different psi
I think it basically resets your baseline pressure so that the computer doesn’t see it as an error with higher or lower pressures. Similar to what you’re saying
@@fish_onn619 If it is still on after reset you might have a bad TPMS sensor in one of the wheels that needs to be replaced. Or your pressure might be too low in one of the tires. Does your car display the pressure for all 4 wheels?
@@NKPGarage rn now it’s doesn’t show the 4 tire pressure anymore. I pump my right rear tires. Because it was low. After that. The light came on. And can’t see all tire sense anymore
@fish_onn619 I would start by checking the pressure in all 4 tires. Make sure the pressure is set correctly on all 4. Then do the reset and see if it operates normally. If at that point you still have an error it might be a problem with one of the sensors.
If you replace the sensors you have to program them to the computer. Just take it to any tire shop and they should be able to do it for you pretty cheap.
Ty for this! Getting new tires today and this is my first Lexus...too many electronics for my liking but i still adore the car!
You got it! Glad it was helpful. ANd congrats on your first Lexus!!
Thank you so much Sir! Do you have any videos on how to change Hydraulic Fluid on 2017 Lexus LX570?
I do have one that’s a pretty detailed. Shows how to replace the hydraulic accumulators, bleed the fluid, and change the fluid. Here ya go.
ua-cam.com/video/kyhXTL4629M/v-deo.html
@@NKPGarage You are amazing! The LX in the video is generation before 2016. Is it the same procedure and steps for model years 2016-2021?
@@haildrreaper Yup! For the 2008-2021 it is the same exact procedure. The mechanical components from 2008-2021 are almost the same. The main changes were the switch in transmission for the 2016-2021 years. The suspension and engine are nearly identical.
@@NKPGarage Wonderful! 👍🏼
@kingofallkarens good luck with the work. Not that hard once you get in there and start looking at everything.
Hello.
Ive been noticing that on 2018+ LX570 that “RSCA OFF” button was removed compared to the 2016 and 2017 model years. Any idea?
I've seen certain years of the GX and LX that have or don't have the RSCA OFF button. Not sure what reason is for it to come and go. The function of the RSCA OFF button is stop the side curtain air bags from deploying when the vehicle is at a severe tilt. Most people will never use it. But if you really need it for aggressive off-roading it might be worth looking into what it would take to add it.
I replace all my sensors and the light was on. I got Costco to relearn all the sensors and they confirm with me it was successful and light is off. I left happy but when I scroll over saw the dashes without reout. Drive an awhile and nothing. I did the reset light video and now had drove for awhile still won’t pick up the reading. Any suggestions?
The warning light hasn’t come back on but the display still dashes with no reading.
I figure if would starting reading by now since I just did a 8 hr trip. I would figure if sensors wasn’t program right the warning light would be on by now right?
Thanks
If you’ve done all that they should be showing a reading. At this point you might need to take it into a Toyota or Lexus dealership so that they can hook it up to the Techstream computer and see what the issue is.
Thanks. I was hoping to avoid that option
Could also try to go back to the shop that installed them to see if they can do a relearn again
I did the procedure, the light flashed three times , but my 4th sensor above the spare still shows 26 and yellow?
Does Lexus have TP sensors in the spare tire?
Yup, all of the LX570s we have had over the years have 5 TPMS sensors. 4 for the rolling tires and one for the spare tire.
From what I read. That’s not a reset button. It’s a set button for if you go with tires that require more or less psi. Mainly for when you get new tires with different psi
I think it basically resets your baseline pressure so that the computer doesn’t see it as an error with higher or lower pressures. Similar to what you’re saying
What if the tire symbol is on already. How to know if it reset.
The same reset procedure works, it will reset the system and the baseline values.
@@NKPGarage I tried it. Didn’t turn off. Light still
On
@@fish_onn619 If it is still on after reset you might have a bad TPMS sensor in one of the wheels that needs to be replaced. Or your pressure might be too low in one of the tires. Does your car display the pressure for all 4 wheels?
@@NKPGarage rn now it’s doesn’t show the 4 tire pressure anymore. I pump my right rear tires. Because it was low. After that. The light came on. And can’t see all tire sense anymore
@fish_onn619 I would start by checking the pressure in all 4 tires. Make sure the pressure is set correctly on all 4. Then do the reset and see if it operates normally. If at that point you still have an error it might be a problem with one of the sensors.
🌹 *Promo sm*
Thanks for watching!
Replaced all 5 sensors, filled tires, reset, still blinks and stays on...not spending $500 at dealership...TPMS is dumb.
If you replace the sensors you have to program them to the computer. Just take it to any tire shop and they should be able to do it for you pretty cheap.
Mine is still yellow
Are any of your tire pressures low?
Bummer that there’s no clever way to get rid of the Tom’s warning lights once one of the mise sensors dies. Those annoying orange light haunt me!
I think there's a way to totally disable the TPMS system. But it's not that hard to have a bad sensor replaced either.