IKEA STYRBAR - Top 5 Home Assistant Blueprints

Unlock the full potential of your IKEA STYRBAR Smart Button with our comprehensive guide! Dive into the seamless integration of this versatile device into your Home Assistant ecosystem, using both Zigbee and Zigbee2MQTT protocols. Follow our step-by-step tutorial to get up and running in no time.
🔧 Installation & Configuration:
Step 1: Connect the IKEA STYRBAR Smart Button to Home Assistant via Zigbee. This is the standard method suitable for most users.
Step 2: For advanced users seeking more customization, we guide you through the process of integrating the button using Zigbee2MQTT.
💡 Blueprints for Lighting Control: Explore five innovative blueprints that transform your smart button into a lighting wizard:
*Blueprint 1* Basic functionality blueprint by Malte
*Blueprint 2* Basic functionality plus temperature control by JeffKrz
*Blueprint 3* Add Switch control by CybDis
*Blueprint 4* Action allocation to all buttons by Keviin Cosmos
*Blueprint 5* Diming, Temperature and Colour controls by Roberto80
🏆 Best Blueprint Recommendation: We provide a recommendation for the best overall Blueprint to use for its ease of installation, consistent performance and high partner approval factor.
Join us on this smart home journey and elevate your living space with the IKEA STYRBAR Smart Button. Don’t forget to like, share, and subscribe for more smart home tips and tricks!
🙏 If you would like to support me and this channel, you can JOIN and SUBSCRIBE 🙏
Join - urlday.cc/ty4oo
Subscribe - urlday.cc/njm5y
#homeassistant #ikea #styrbar #blueprint #ikea
___ ☕ Buy Me A Coffee! ☕ __
PayPal Coffee - urlday.cc/0hrs0
Buy Me A Coffee - www.buymeacoffee.com/smarthom...
__ 🕒📩 Timestamp 🕒📩 __
00:00 - Introduction
00:43 - Requirements
01:36 - Installation Using ZHA
02:31 - Blueprint by Malte
04:48 - Blueprint by JeffKrz
07:26 - Blueprint by CybDis
08:25 - Blueprint by Keviin Cosmos
09:06 - Blueprint by Roberto80
10:20 - Installation Using Zigbee2MQTT
12:32 - Roundup
__ 👋 Handy Dandy Information 👋 __
HACS Installation - • Install HACS in Home A...
Zigbee2MQTT Installation - • Install Zigbee2MQTT, S...
Malte (Documentation) - ZHA - IKEA four button remote (Styrbar) for lights (E2001, E2002) - tinyurl.com/yc4zund5
Malte (Integration) - IKEA Sour Button Remote - tinyurl.com/ycbzcxnd
JeffKrz (Documentation) - ZHA - IKEA Styrbar - White Spectrum Lights - tinyurl.com/4z55f8ky
JeffKrz (Integration) -ZHA - IKEA Styrbar - White Specitrum Lights - tinyurl.com/3wzwah4s
CybDis (Documentation) ZHA - IKEA Styrbar - White Spectrum Lights - tinyurl.com/mu243bh2
CybDis (Integration) ZHA - IKEA four button remote (Styrbar) for lights and switches - tinyurl.com/ymdmay83
Keviin Cosmos (Documentation) - IKEA Styrbar E2001-2002 Ultimate Zigbee2MQTT (Z2M) - tinyurl.com/4pc5f25b
Keviin Cosmos (Integration) - IKEA Styrbar E2001-2002 Ultimate Zigbee2MQTT (Z2M) - tinyurl.com/4b6r6u4n
Roberto80 (Documentation) - Zigbee2MQTT STYRBAR (Documentation) - tinyurl.com/2neht2zj
Roberto80 (Documentation) - Zigbee2MQTT STYRBAR - tinyurl.com/mr29p2nz
__ 🔗 Affiliate Links 🔗 __
NordVPN (Get 72% off NordVPN + a Saily eSIM data gift) - go.nordvpn.net/SH8jJ
Sonoff 15% discount, *SMARTHOMEAUS*, has now been increased to 15% on ALL products!!
ZB Dongle-E - urlday.cc/jjb33
Zigbee Bridge Ultra - urlday.cc/zca9m
ZBMicro - urlday.cc/i5fmd
SNZB-01P - Zigbee Wireless Switch - urlday.cc/5o8k6
SNZB-02P - Zigbee Temp and Humidity Sensor - urlday.cc/ss33w
SNZB-02D - Zigbee Temp and Humidity Display - urlday.cc/qq1ez
SNZB-03P - PIR Motion Sensor - urlday.cc/86w5y
SNZB-04P - Door Contact Sensor - urlday.cc/j8ifs
SNZB-06P - Zigbee Human Presence Sensor - urlday.cc/4uy62
Bridges / Coordinators and Dongles
Sonoff iHOST Bridge - urlday.cc/0vdcq
Zigbee 3.0 USB Dongle P Plus - urlday.cc/3bcqj
NSPanel Pro - urlday.cc/fvf1b
Home Assistant Server (HP EliteDesk 800 G4)
US - amzn.to/3DcEjG8
AU - amzn.to/44hsyZW
The site receives a small commission if you order from any of the links above. This does not cost you anything and is paid by the supplier.

[@samiraslan9735]

Thanks for the wonderful video, I used Malte's one but I have an issue!!
When dimming/brightening it stops after few steps! I guess you had the same issue in the video. Do you confirm?

[@smart_home_australia]

Yep, my conclusion was that although these are good each of them had an issue. I reverted back to Jeff KRZ, basic but works. When I get some time I plan on building my own.

[@TamerBakir]

Hi. I have the Malte blueprint. Is there an easy way to make left and right to toggle between colors?
I have e Govee RGB light and I want left and right to switch colors.

[@smart_home_australia]

Simple answer, nope. I'm working on a some helpers that will cycle through colours that is looking promising and if I perfect it I'll release shortly.

[@darknessblades]

Did they change something to the remote breaking its function with ZHA?
since I have one that works easily under ZHA

[@smart_home_australia]

Which of the Blueprints are you talking about? Or do you have a new one? In which case can you share the name of it.

[@darknessblades]

@@smart_home_australia I have a Ikea styrbar that does not need a blueprint to work with automations

[@smart_home_australia]

The Blueprints are there to make things simpler for those that don't understand the nuances of entities, plus some more advanced features such a looped triggers. But you are right, you don't have to use Blueprints.

[@esotericmoniker]

@@darknessblades I've been looking around to see how this could be possible but everything I've found seems to require a blueprint. I add the Styrbar to HA but it has not entities so you can't use it to do anything. What version is your Styrbar firmware, mine is 0x01000020.

[@tommyeinrudjohansen3855]

5 times didn't do it. I had to puch 3 times. Maybe different FW or area?