Fender Custom Shop Master Builder Tips | Floating a Bridge | Fender
Вставка
- Опубліковано 16 гру 2012
- In this Master Builder Tips segment, Fender Custom Shop's Paul Waller shows how to float a bridge.
SUBSCRIBE NOW: bit.ly/FenderSubscribe
SHOP NOW: bit.ly/ShopFender
About Fender:
Fender Musical Instruments Corporation is the world’s foremost manufacturer of guitars, basses, amplifiers and related equipment. With an illustrious history dating back to 1946, Fender has touched and transformed music worldwide and in nearly every genre: rock ‘n’ roll, country and western, jazz, rhythm and blues, and many others.
Connect with Fender:
Visit FENDER WEBSITE: www.fender.com
Like FENDER on FACEBOOK: / fender
Follow FENDER on TWITTER: / fender
Follow FENDER on INSTAGRAM: / fender
Follow FENDER on TUMBLR: / officialfender
Follow FENDER on SNAPCHAT: / fender
Fender Custom Shop Master Builder Tips | Floating a Bridge | Fender
/ fender
![ПОЛНАЯ ИСТОРИЯ ЭКЗОРЦИЗМА [Топ Сикрет]](http://i.ytimg.com/vi/qBySr6Bt0B8/mqdefault.jpg)
![The Perfect Stratocaster Trem / Vibrato Setup [Floating, Flat Or Blocked?]](/img/n.gif)
Want to see more from Fender? SUBSCRIBE and hit the BELL ICON to stay up to date on new videos from us!
this is priceless, thank you!! subbed :)
What about the saddles?
I did exactly as he explained in the video , worked perfectly, Stays in tune , can't be happier Be careful of what you think you know
Falcorystico my issue is if I hit the open low e, then bend the high e the pitch of the low e changes.
@@thegreatsamboni1 Just a guess your problem might be the nut, the strings cannot move freely back and forth. Maybe you changed to a heavier gauge strings, you'll have to rework the nut and make sure its lubed , i have often found this to be a problem.
@AnticommentWarrior you may well be onto something there, I'm going to give your recommendation a try
@@thegreatsamboni1 this is perfectly normal, when your bridge is floating and you bend a string you put tension on the tremolo-block in which it moves forward slightly and thats whats making the low E out of tune. The best way to combat this is to have a slammed tremolo with 4-5 springs.
What I like about this guy's explanation is that it's simple to do, and it works. Followed his simple steps and just set up 2 traditional 6-screw bridges and a more modern 2-screw bridge where all now stay very much in tune. There will always be a string or two going out of tune every once in a while, but that has more to do with the nuances of the actual components of the guitar (strings, tuners, nut, etc.). But the important thing is that this 'process' works. Thanks for this video.
THIS IS THE ONE YOU WANT.............PREFECTION AND TO THE POINT.........THANKS MAN.....A MILLION TIMES OVER
Yet ANOTHER good way! I tighten the springs until the block falls out. That way I can check to see that the tension was even across the whole sustain block when finished.
this is the best video i've seen so far on setting up a floating tremolo IMO, the way Paul set it up does work and will go back to tune after a dive bomb or whatever you do with the trem just by releasing the whammy bar , "believe it or not" it worked on my squier strat. I'm using 10-46 and 3 bridge springs set to the center like he did.
I'm using 3 springs and I just reset my guitar with the springs inline and I can't see any difference if you angel the outside springs or go straight. but it does go right back in tune either way after using the trem and its really responsive, I made a block like he uses with a nickel and wrapped it with masking tape to keep my trem the same height off the deck, no muss no fuss same height any time I need do any tweaks like yesterday, I put some 9-42 nanoweb strings yesterday.
Tiger Audio, Inc. Well personally, I have a Squier 50s Classic Vibe , everything stock. I have 42-10 strings, and the springs for the vibrato came set up already like the guy had finished with in the video. The only thing I had to do was unscrew the screws to float it. As far as stability/staying in tune goes, I can abuse the whammy bar and they'll stay in tune very well. And when I say abuse I mean handling it the way Hendrix did, and he was pretty rough!
This man did in 5 minutes what took me about half an hour the first time I tried to do it the way the “average joe” would. Bravo.
I followed this and it worked great. Still in tune after every go. Don't understand all the hate on the replies.
just know it alls man.........you know, cork sniffers
Maybe they aren't stretching the strings in first
Love the comments giving the Custom Shop guy pointers.
haha true!
At 0:55 he says he "runs 3 springs" but clearly meant 2 springs. And at 1:38 he says "about a full step" but it's audibly a half-step. Dude just sucks at explaining.
Thanks Paul. Just setup my squire CV. Used fender vintage trem springs set it to your exact instructions and it plays a dream, even bends can’t be pulling the bridge and it keeps in perfect tune. Thanks again.
This method works! forgot the post it note way that others are doing. They aren't as accurate... this one actually keeps your guitar in tune, if you are very very precise with all the steps and making sure to tune it perfect before you put the 3rd spring back in and take the block out. For my block, I use 2 nickels taped together with masking tape until I have the size I need. I also set mine up like Carl Verheyen sets his up. G string goes up 1 1/2 steps when you pull all the way up on the bar. It took me a few tries to get this right, but I found out I was not tuning perfect enough on the last step before taking out the block. Make sure you tune it several times to perfect pitch, before proceeding. Now my strat plays like it should with a trem that I can dive bomb and pull up hard or whatever and it goes right back in tune. This fender dude knows his shit!
After watching this video, I setup and floated my Fender Squire. I also changed the pickups.
It stays in tune very well after I lubricated the nut and bypassed the string trees (except for the high E).
She is now a serious instrument ! I can't get enough of her.
+Nasher188 how you mean when you say bypass?
Don't use them. Run the strings past the string trees.
@@Ston247 i still use my string tree (for B & E) works fine if you lube underneath it.
this video helped me out...Thanks for posting. my trem perfect now...
This is by far the best Strat trem setup video I've found - has worked flawlessly for me on multiple guitars. Thank you for sharing!
I laughed when he said put the back cover on
This was useful, got me in the zone. The chock idea is great although you need to make your own chock to suit. I used several popsticks taped together to get mine where I wanted it. I also found I needed to loosen the top six screws a little or it wouldn't pivot at all even with no tension on it (strings or springs).
Good video, I’ve never had a tremolo before, I did this in about ten minutes and it worked as described, trem stays in tune well.
Great video I just floated the bridge on my MIM 2013 Strat it was pretty straight forward thanks to this video and saved me the time and expense of visiting a guitar tech I used a £1 and 20p coins taped together as my block it worked perfect thanks again
Don't know why there's such that habit of setting up 2 springs in angle! Even when a guy, who happens to work at Fender Custom Shop (!), says "just because"!
Yep! Great explanation!
+Alberto Jorge Soares I swear I wanted to smack him when he said just because... this guy is an embarrassment to the company
For an "embarrassment to the company" he's sure made some pretty impressive instruments. Not that the Gretsch-alike Teles are exactly my thing, but I sure couldn't make one.
you are right. an 'expert' offers his reasons for doing something rather than a smart ass remark. 'you can st your action where you like yours...' how the hell is a regular guy supposed to hear an 'expert' say this and not dismiss the guy as a smartass ? An expert tells you a preferred height because it produces or allows something desirable. And he explains what it is.
Don't think I'd let him set up my guitar, he must be the janitor at Fender Custom Shop. Or maybe he doesn't work there at all.Mmmmmmm
purgeist the only secret is to tighten the low E side more, because that side holds more tension. when your adjusting you should pull the tremolo and see if the bridge (while levitating) is level. the low E screw must be tighter. and the springs should be straight, not in a triangle. it's really the best way, i've tested it for years.
This Video Helped me set up my guitar after not having played a vibrato trem in 6 years. Thank you!
I've been trying for a very long time to set up my bridge to stay in tune Thanks a million for making this video just bought my first tele from you guys and i love it :)
Thank you, thank you, thank you!! Excellent instruction. Worked perfectly.
Works on floyd roses, too!
This video saved me so much damn time, thank you!
I see there are lots of people that are quick to judge this guy and they think they can do a better job. I can only assume it must be envy of the master builder's job. Well, the proof is in the pudding, I've never set up my guitar to a different tuning in 15 minutes before, so thank you for that.
Hi Brandon. Could you please answer a question ? When you intonate after you have set your action do you retune the guitar with the claw screws? Thanks
THIS IS THE BEST VIDEO ON SETTING UP A TREM BLOCK!! By miles! I had difficulty setting up my trem block and ive watched a dozen videos where they just confuse you. This is the KISS method. Keep It Simple, Stupid!
What's really cool about a floating bridge is that when you bend the string it pulls up the bridge just a hair to give you more clearance so the note doesn't choke out or buzz! Also it lowers the note a hair at the top of the bend so you have more stability of hitting the note correctly. It really is a difference you can hear and feel.
I didn't think a floating trem would stay tuned as well as set 'on the deck', but I was wrong, it is perfectly stable and I love it. You just have to make sure you have the string gauge and tuning you want to stick with.
I actually find floating trems more stable because you can pull up to correct the tune after a deep dive whereas you can’t do that with a decked trem
can you imagine having to listen to that all day? (back-ground, guitar tester. just teasing.
I know it comes from years of practicing his trade, but the speed at which he does this is inspiring.
This was awesome info. Thank you so much. I'm doing all my own set-ups now, and I love Learning tips & tricks from the Pro's. Stay Safe.
Great info, just what I was looking for. Brief and to the point. Thanks.
Great video. I've been wanting to set my bridge like Jeff Beck and now I know how. Fender's the best.
What is it that people don't understand here? This is a straight-forward and informative video.
There was no use of the bar at the end to see whether it all worked or not
Hi Paul - Fantastic - this video explains in a clear way how to set the neutral position using the shim - simple but perfect!
You mean the thing he put inside in 1:48?
Yes, that, plus the adjustment of tension of springs vs. strings.
Ritchie Blackmore Strat, will try tuning from springs. Thanks!
" I wanna set the bridge about where I wannit" . Is that metric "about" , or imperial "about" ?
@james crowe r/woooosh
@james crowe exactly...the set up is not a formula good for everyone
It’s Fender proprietary measuring system for Fender TM products 😂😂😂 how do I get my 7 minutes back?
Well, that's an interesting approach!!
Easy solution for that is putting the middle spring on an angle as well,usually parallel to the top spring where the low E is,so no matter what you do,that middle spring will always have somesort of tension to keep it in place.
you sir know what your doing. fine video
thank you ,goes fast and works
Thanks Paul!
First attempt, it worked! Thanks a million!
We're here to help you along your musical journey! 🤘
Worked great for me. Thanks for the video.
Thank you very much.
Peace🙏
That's how I set my 2 springs too. I like a light trem 👍
Succinct simplicity + economy of words: PRICELESS.
This is my dream job.
Working on fenders.
Great tutorial!
Honestly I'm against that springs at an angle thing. Isn't it more logical to set them parallel so tension is the same at every spring?
yes it is. Angled springs means the centre one is loose.
Yes. You will experience issues with the bridge returning to zero position after bending notes when the springs are angled. Three springs set up in parallel will fix this issue.
@@charlief. how would it create issues returning to zero position? That makes no sense.
@@brent3086 When you perform a bend on a guitar with a floating trem, the entire bridge itself raises as you bend the strings. When you release the bend, the bridge should return to its initial position. However, if you set the springs angled and perform a big bend, the springs are not as efficient at returning the bridge to its initial starting position before you performed the bend. If you check the G string, it will be slightly flat until you use the trem. This problem can be avoided by setting up the springs parallel to one another.
@@charlief. Thank you for the explanation. So what is the benefits, if any, to angled springs?
so, if the 1st string pull-up on bar is equivalent to 1/2 step (open e to 1st fret f), how far up in pitch does the open b and g strings go? please.
when you say step...? did you retune the E string?.with the 2 springs? to get from E-F#....my 2 springs fall off. i have the gfs 2 point trem upgrade . are my springs stiff as all get up? a little clarification . thanks. all good on vid..just missing something? maybe me?
I'm a Fender man of 36 yeras...I was taught by Rene'Martinez. I'll tell you, there's No way that Trem's going to stay In-Tune...Another thing...he didn't explain how to set the Plate and Bridge Screws to the Body & he hasn't adjusted the Springs to the Tension of the Strings...
I work on Tremolos and the end result is a floating tremolo that stays in tube 99.5% of the Time Floating :-)
(Stock Tremolo) It's an Art Folks. Doc
I finally found it. Thank you
excellent thanks :)
That's pretty slick!
He makes it look so easy
Would you set your action at 5/64ths at the 17th fret on a road worn Fender with 7 1/4 radius neck?
I have my Squire Deluxe claw attached at an angle, don't know why? Maybe to keep it in tune more
cool man...great tutorial!
GREAT video!!
I set up my vintage trem to float and I achieved the desired intervals with correct intonation and action. It is performing in both directions, pulling up and pushing down. My question; is it expected to have a high gap between deck and bridge? Mine appears very wide. Should I be concerned? If so does it mean that I need to approach my setup differently? My action and intonation was set prior to adjusting the claw. Not to mention my springs are in a V formation, should I parallel them instead? My strat is not staying in tune. Thank you sir in advance. Hope to hear back
How about starting with no standard 09 string from the facorry.. I put 11 one it after i got the Fender stratocaster vintera ll, and the whole brige come far up.. On the back I scruw it up.. But dont know if everthing is good.. Its sysy in tune, but string above mij fretbaord are a little higher now?
Hello Paul! Any idea why the trem cavity in my FSR has not been painted??? Or treated or ?
Good stuff.
The best way is from Dave's World of Fun Stuff, this guy almost gets it right
Should the bridge be flat on the guitar? My guitar has the bridge a bit separated from the body (I'd say 1,5 cms) and I dont know if thats the way it should be... Ive been fixing it by myself, but I really dont wanna mess it up!
Very cool thanks Fender and Paul! :-)
What size allen key fits those saddle screws?
perfect..
Like a NASCAR pit stop! 🤘
That was as slick as snot on a door knob. Bring it into tune with the claw screw adjustment.
I want to set my '84 Standard with the bridge floating so that I can pull up on the bar instead of just pushing down, but there is no back cavity on the guitar. Everything is accessible under the pickguard. How can I make that float? Is there a video for that?
Uh, I believe that's a half-step Custom Shop Dude...
Beano Traffini indeed, and so where do his B and G end up? that would be informative.
@@camdemobile the B goes a full step, the E half step. I don't remember the G
@@sergioserramusic g would be a step and a half
How the bridge is set up at the beginning, is it ok to use the wam bar in that position?
Im just using it slightly. Sounds great but could i strain/damage anything? Thanks
If you use it slightly and very light, you have no worries going out of tune. No need to do this setup method
If one use heavy trem use and divebombs, this setup is for you.
is it really okay to make your fender squire into floating tremolo?? just asking pls i need answer because i wannt to have float trem so i can do dive bomb
removed 2 springs and on my first string change added a thumb fingernail extra string length, added a few lines of pencil and got good results with my Squier transfat HH so...
i have a roadworm 60s strat and i feel the tone sound a little muddy to me, i was thinking in upgrade the bridge for a callaham or maybe fender pure vintage brigde with pat pend stamped saddles, what do u think should be better choice ?
roadworm strat, I want one of those!!!
I really dislike the look of my modern custom deluxe snap in trem i would like to vintage it a little like add a plastic tip and maybe vintage styles saddles, is this possible?
HOLYMOLY i know this is 10yrs old but new to me , so awesome thankyou so much love it
Just because the times I've set the springs parallel I get a sound like I've flicked the trem bar each time a string is hit hard. two springs at an angle cancels it out, like a damping effect.
Wonder if this guy from fender has had the same experience.
I did it the hard way LOL Thanks for the tip c];-D
What is the advantage of having the middle spring in there with the outter 2 at a angle? The inner one has a different tension on it when they are like that. I do mine all parallel for a more uniform tension when using the bar. Stratocasters are awesome!!!!!!!!
You're incredible!
Very useful my strat has a perfect setup after watch this.
What do you guys use for the block?
0 to 7th fret - adjust truss. 12th down, adjust bridge. Fairly simple. BTW nut to 1st should be no higher than 1st to 2nd fret. No string should have more space than a credit card thickness to the fret.
Great video. I followed all the instructions, had the guitar perfectly step up with the bridge spacer inplace (flawless tuning / intonation / action), but the problem always happens after adding the 3rd spring at the end / removing the spacer and retuning the guitar with the tremolo screws using a middle string: once the middle string is in tune, the tuning on the other strings gets completly messed up and is all over the place. I need to retune each string, which changes the floating bridge position, ruining the action…. My guitar is a squier. I’ll soon try to upgrade the tuners to see if it fixes anything.
Lube both the nut and bridge saddles & string trees with "a little" Vaseline or graphite from a #2 pencil lead. Chances are it's not the tuners but one of the friction points for the strings that are hanging up on individual strings
LOL, every time I get a new strat the first thing I do is take the back tremolo cover off, put it in the case and leave it off permanently. I prefer the first setup as shown in the video with five springs, I don't use the whammy bar.
What did you set the action at?
I really was expecting more from a Custom Shop guy. Running the two outer springs at an angle means more tension on those two springs (stretched further) than on the middle spring (stretched less) . The setup described does not give any particular "float" to the trem, meaning you don't know how many steps it will pull up. It just gives you a non-specific ability to modulate the tone using the trem. If that's what your after, just about any adjustment that gets the trem plate up off the body will do for you. But there is a lot more that needs to be done if you want a floating tremolo that you can PLAY like Beck, and not just warble around with like Hank Marvin .
someone say "HipShot Trem Setter< the best way to stay in tune > look it up💫✌🏻️
Hank Marvin's warbling is priceless.
That’s why he says, “where you like it.” The video is about how to float a trem; not why.
HipShot Tremsetter is un-necessary. I removed them from both my Strat Plus guitars and have no problems with tuning, or return-to-tune
What was used to shim the block?
Can you offer any advice as to how you can set up the Strat so it stays in tune when I use the whammy bar...advice. suggestions?...it's a 2007 American Standard strat...thanks!
I use dry graphite on my nut. And i removed the string tree as i have staggered locking tuners. Stays OK in tune. Other than that you can try Nut Sauce.
I thought Fender was insane for the prices they charge for their custom shop guitars after seeing this video I think they're certifiable
What? You mean this video justifies how much they charge, or they're certifiable, meaning they should be put into an insane asylum?
@@imaxdigital7052 did you see the nice strat setup video showcasing their state of the art cardboard boxes? It'll make you hungry for frozen pizza, watch out...
Would have liked to see the whammy bar screwed in and the tuning checked after using it.
Its in tune now but for how long with locking tuners mine will not stay in tune and I don't use the whammy bar but PRS that cost less than my Strat has had no funning problems at all.
I just bought a 50s classic vibe strat and the weak fender instructions says the vintage style 6 screw trem IS NOT A FLOATING TREMOLO BRIDGE?? I have a MIM strat with the same 6 screw vintage tremolo bridge, floated a full step and it stays in tune great. Why does fender claim this 6 screw vintage tremolo bridge IS NOT A FLOATING BRIDGE!? I'm confused, I would like to set it up the same as my MIM strat. I've tried and I can't get it to hold tune. Is it really not possible with the new Squier CV stratocasters? Its a fine guitar...
Can fender Stratocaster player series be adjusted to floating trem??? Please
All trems can be floated..
Float your bridge and use Gun Slick or nut sauce on your nut and saddles and YES it will stay in tune, Jeff Beck has been doing this for years!!
Willie B3 I use a hand slotted bone nut where the string slots themselves are brought to a glassy polish, and graphite saddles. Pretty much bomb proof and I get a good full step backwards. There’s something magical about my Strat and it’s trem setup, but it’s a mystery. I’d never adjust the six screws that hold it to the body without taking some careful torque measurements first. I’m really not sure what it is. My claw is angled a bit, I use three springs, tuned to E flat, all the steel is cold rolled. Everyone that’s played it is pretty surprised. I also never break strings, which is one of the things I remember nut sauce being so very good at preventing. At the end of the day I’m getting Floyd Rose performance and reliability, but on an early 60’s Strat whose only original attributes are the body, neck, tuners, and truss rod. All other parts are Callaham or from another 60’s Strat. The wonders of guitar tech huh.
he made it seem so easy, i said why not? and so i went in there backed up my screws a bit to get them springs off just for it to go off like a bomb. im not trusting myself with guitars on the technical part no more lmao.
Hello, my new American standard Stratocaster 2015 with two pivot screws bridge seems to have the bridge no parallel to the body..the shop put 10 high E gauge string and before it was 9. Now the treble side seems to be lower and in fact the sound of e b g is not beautiful( I had also a little G buzz solved with loosing truss-rod and getting higher saddle). IM scared; till now my classic vibe 50 squier Stratocaster sounds and plays better with more sparkle in 2 e 4 positions , and here in Italy costs 400 euro instead of American standard is 1600 euro. The American strat has the fat hot 50 pickup and they are very hot and powerful and the fender specs of pick up height should be change for them( not 2.4 mm bass and 2mm treble..but it needs to definitely lower the height ).this being said , according to you , should I work on the 2 lateral pivot screws to put the bridge parallel and should I raise a bit the bridge screw or should I work with springs opening the back of the guitar? Thanks
Great info. Perfect setup for the perfect guitar by skilled Technician.
The problem I have with my new Elite is that if I hold one or two strings and bend another string simultaneously, the strings I'm holding but not bending sound out of tune as the tremolo bridge gives way. Can this be fixed by just tightening the bridge? Any advice? Thanks!
Slam the whammy on every string when tuning, do not move on to next string until the string stays in tune after dive bomb