VW Polo 6r Brake pads break discs replacement Part 1/2
Вставка
- Опубліковано 7 вер 2024
- VW POLO 6R 2010 rear Brake pads and Brake discs replacement.
I did a test before doing this video.
Here is how you can replace your brake pads and brake discs at your own. I advise you to be assisted by a specialist.
With this camera I recorded this video:
amzn.to/2K8QgP1
Here is what socket set I use :
amzn.to/2NXmBe6
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support! Here are some AliExpress links to cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces removal tool set
s.click.aliexpr...
-7 pieces ceap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexpr... (i use this to remove old Stickers and Glue Adhesive left on car)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexpr...
Check out my other UA-cam channel / carhax
❗Check any car's mileage and accident history with carVertical 👉 bit.ly/3b6S8pI
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces of a removal tool set
s.click.aliexp...
-7 pieces of cheap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick-Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexp... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexp...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
![[EN] Perfectly changing the ATE brake disc and brake pad - instructions / ExpertTalk](http://i.ytimg.com/vi/adjWFEdpoVk/mqdefault.jpg)
use handbrake when you remove disk screw
The Brake disc you can remove and change without removing the brake carier 👍🏼
You beat me to it. Although depending on disc brand, there is a a small chamfer on the back side of the disc which helps miss the hub when locating disc in carrier. I replaced few years back with Pagid discs to find they woukdnt pass the hub by a millimetre. They didnt have the small chamfer. A little persuasion with a mallet and they squeezed in. Reported it to Pagid so whether they altered the mold i dont know. Doubt it
never let the brake calliper hang by the brake hose! support it with a cable attached to the strut or something.
In this case the handbrake cable takes quite a bit of the weight and it's only a small calliper which doesn't weigh much so not really a problem.
the screw that holds the disc onto the hub can be a bitch, you need to lube it a couple of times with penetrating oil the day before you do this, and then use some leverage like a breaker bar or something long to break it loose, or you'll screw up the screw and you'll have to drill it out.
Thank you for all the advices, is for the first time when I'm doing it. I don't advise anyone to do this without under the guidance of a mechanic
Thanx for very good video!! I tip might be that you can use a hammer to persuade the piston to retract into the caliper. I tried everything before this last resort. Disconnecting the brake line, varming cooling spray Tools made for retracting the piston. Btw the caliper holder doesn´t nesserily need to be removed for a rotor change.
What is that tool he is using to push back to make space for the new brake pads
A year late, but it is just simply a piston wind back tool
i replaced rear brake pads on vw polo 1.6, now the handbrake is not functioning,when you pull the handbarake it sound like its working but not.what can be the problem?
Is it 8 mm for the Two bolts? The Ones Holding the bracket
Find another video, this guy does so many things wrong!
You need an impact screwdriver for the locating screw.
I see many mistakes.
Like he said, it's his first time.
echt wat een amateur
Yes I’m an amateur I like doing thing on my car, fist time when doing breaks in this video ✌️
So many things wrong here...
Care to elaborate? Brakes are kind of important so if you see something wrong it would be good to say what it is.
20 min for a 5min job 🙄
I’m not a mechanic, this was the fist time doing a brake job. I love working on my car cars
Yes but he is performing a useful function by explaining what he's doing. Unlike you.