Man.... that turbo doin some screaming!! That ol girl wasn't even buzzin as high as she could but that turbo was singing the song of the people. Sounds amazing! What a build!
You're absolutely right... this engine is governed at 2800 rpm and I wasn't even close to that in this video. I'll be making some more videos with a variety of driving conditions... going to be a lot of fun. The Pulsar turbo has been impressive. I've seen over 20 psi of boost at full power and RPM. And plenty of turbo whine!
@@hanscustomshop very much looking forward to it! It seemed so effortless to spin the turbo up. A 4 banger Detroit normally really has to be going to get one moving.
The turbocharger quietens that screamin' Jimmy. In my 20s I ran an Etnyre Chip Spreader with a 4-53 without the turbo. Now and then the muffler would fall off, wake me out of my concentration on driving a straight line and scare the hell out of my helper running the belts and gates. It was loud enough with the muffler on. This is one cool build out of a favorite brand of mine.
I have seen those volvo power steering pumps used in a ton of late 60s early 70s ford trucks. It seems to be the go to pump for people doing conversions or restorations
In a sea of Cummins projects, I'm glad that it's different... 😂 you absolutely couldn't have said it better! I've enjoyed my 453T Suburban for 23 years now. Now I'm in a 6V project. Thank you so much for sharing all this!!
You’ll really like the V6…..I’d put a “natural” 6V53 with a set of 60’s up against any turbo 453 build out there. A turbo’d 6V53 with a set of 60’s @1.460 should met you in the 275 range @2800 and if you’re willing to spin it to 3,200 could have you at 300hp. From a 318 cubic inch diesel that’s pretty damn impressive. Of course if you can piece together enough 53a Jake masters, drones, bolts and bridges to add those to it you’ll have something even cooler. I had a chance to buy a C70 flat bed with a 6V53 that had a complete working set of Jakes on it for $3,500 a few years back…i passed because the truck was rough and I couldn’t see getting my money back for the motor, a clark 5 speed and an old Eaton 2 speed 21k rear end. Of course a few years later I saw a complete 6V-53A Jake “kit” that were functional but probably needed kits put in them and some wiring replaced end up selling for almost $5k on EBay…..FIVE GRAND. If you’d asked me a decade ago what 5 grand would buy, I’d have said you could get a really nice running silver 6V53TA for that kind of money….or even one of the aluminum 6V’s from the military boats if you could find one. It seems like prices on 2 stroke parts are really skyrocketing these last few years….which is great if you’re somebody that’s been hoarding them for decades, but not so great of you’re one of the dummies who sold most of your hoard before the market went nuts.
Thanks for sharing such a great project. Who doesn't LOVE the old Diamond Ts. I've always wondered why custom builders don't build a modern version. Again thanks for sharing Job WELL DONE !
WOW ! Absolutely love this build ! I am 75 years old. I grew up around early hot rod cars and trucks. Big conventional cab trucks always caught my fancy. I have my own hot rod truck in the shop being built. thank you for showing off the fine work you have done on your truck.
Thanks for your comment. I'm still getting tuned up on the short shifts with this particular transmission. Eventually I'll get to short downshifts, but that's going to take a lot of practice. 👍
A fabulous build Hans. A real credit to yourself and your talent. The DNA of the truck brining in you experience’s and memories of the past driving trucks blend perfectly. I have just imported a fully restored 1949 Diamond T 306 from Florida down here to home in New Zealand. The truck arrives at our door this coming week. My intention is to customise the Diamond T in the same theme. However we have a Cummins 5.9 turbo going in. We do not have the earlier Detroit engines available here. Impossible to access for us. Again a fantastic build and look forward to seeing more UA-cam content on Diamond T. All the best Hans
Thanks for your kind comment! Sure is exciting to imagine your 306 arriving after such a long journey. Good luck with your modifications and I sure would like to hear more about it. I visited New Zealand in 2013 and had a lot of fun. 👍
Thank you for the reply Hans. I would like to send you a pic of the truck if possible. I am pleased you enjoyed your trip to NZ and had a great time. Regards Darren Buckley
I love what you did with the truck.I get so sick of seeing people take a heavy duty truck and put it on a 1 ton Dodge chasis.Thank you for leaving it full size.
Man, what an amazing build! Perfect choice for the drivetrain, in my eyes! Those 4-53T's are no slouch, and the 10 speed Ranger will let you get the best out of it. I'd love to see it hooked up to a nice drop deck trailer for hauling equipment and whatnot. Sure is nice to have the amenities of A/C, power steering, A.O.H. brakes, suspension control, etc. Looking forward to more of this little gem!😄👍👍👍
What you might consider is mounting the Jake switch on the upper side of your gear stick so with your hand 🤚 on the stick you can just drop your finger down and flick the switch 😉
This is my new favorite custom truck. I have a 35' Sundowner horse trailer with living quarters that I would love to have something just like this truck to tow it with. Man what a fantastic build.
Nice truck, looks like you didn;t compromise on any components or the cab and chassis....glad for the detroit instead of cummins 53 jakes another great find..
Clearly you deserve High Praise ....You set the level of energy on a project that is a guide for every builder. I have seen many projects in my life, some better than others, but your project, the attention to detail, simply is outstanding.....In my mind you have achieved the highest rating to a project like this one and will remain the perfect example of engineering and design....God Bless you Fella,and thank you...
Beautiful truck and amazing work. Your attention to detail and holding on to what you wanted, regardless of the challenges is just first class. You are a clever engineer and tenacious builder with great skills. Just brilliant
I appreciate what you have done with your Diamond T and glad that you kept the original frame. I currently have a '47 Diamond T 404 project that I hope turns out as nice as your '49.
Thanks for your comment. I put a lot of thought into keeping the Diamond T frame or not, and I do think keeping it was the right decision. It's plenty strong. You've got a few more inches of room under the hood with your 404. What are you planning to use for the drivetrain?
@@hanscustomshop I actually have 1 1/2 1947 Diamond T 404s. I want to keep it as original as possible with the original drivetrain even though that means that top speed will be about 40 MPH. I plan to use the second cab, fenders, hood, etc. on a RAM 3500 dually with the Cummins engine. Yes, I know that it is common to use the Cummins but I don't want to over complicate it. With the RAM chassis and drivetrain I will be able to enjoy it at today's highway speeds. Sorry for such a long answer to a simple question.
You have one very nice Diamond 'T' Truck, my friend. If you get a need to sell it you won't have any problem doing that, I'm one of the potential buyers, lol. Everything you told us about the build is locked away right up here between my ears, such a wonderful job. Thank you so much for sharing this video with all of us. BTW, I am now a new subber, left a thumbs up, and a tap on the bell. Thank you again for sharing.
Excellent Truck & craftsmenship you have some amazing skills choosing an Diamond T as your chosen subject I think is supreme and I admire attention to detail and happy to see you chose an old school 13spd Road Ranger instead of 20:58 takeing the easy way out like a lot of people would have by dropping in a 5 spd manual or just doing a Allison Automatic
Thanks for the reply / my plan on 48 ford f6 was a 12 valve Cummings but radiator and after cooler are so wide but thats part of a build is figuring things out / we come out to Colorado springs 2/3 times a year visiting daughter and grand kids would like to see the truck if possible
I couldn't even begin to imagine an aftercooler in my truck. I've already used every available cubic inch up front. But... I'm not trying to set any records with my truck. It runs great and has decent power... I'm happy. Let's definitely get together next time you're in CO. Colorado Springs is only 45 mins drive from my place. I'd enjoy meeting you and giving you a good look at my truck. Email me at hans.custom.shop@gmail.com or phone 303-884-9079.
D*mn Hans you did a fantastic job. I have an old International Loadstar I am doing something similar with and most of the solutions you used are what I am figuring to do to - right down to the same air bag and rear end setup. That Detroit sounds so nice I am half thinking of canning the Cummins I already bought haha Again really nice work.
@@MrMattsAdventures Thanks! Your Loadstar looks cool... I've always liked that body style. The Detroit is typically a "love it or hate it" kind of thing. They are cool and unique... but heavy, loud, and parts can be hard to find. Personally, I wouldn't do it any other way. 👍
@@hanscustomshop so glad to hear that you plan on keeping it , that made my day , none like it , needs nothing , and should be on a calender for sure , God bless you and your family
I wanted to do the same to a 1950,s white mustang.replaced gas engine with a 195 ci Cummings. Engine, ran out of money after a while sold. Miss that project. 😢
That is one fantastic build, Sir! You did an excellent job! I have a question for you, where did you get your custom instrument gauges from/at? Thanks.
The gauges are from Speed Hut. It took some time, but I was able to get the font and layout to look very similar to the original Diamond T gauges. Then I drafted the Diamond T logo and was able to upload it for the gauge backs. 👍
Good question. I wish I would have. Part of the reason I didn't is that I wanted to keep the truck old looking. I kept the patina on the cab, so why not the frame. The frame is in fantastic condition... not one bit of rust and there is even a lot of the original paint on it. But in hindsight, it would have been better to coat it black like all the parts I fabricated for the truck.
Hello, interesting well-made video, I love your truck. Here in Germany we don't have trucks like that, that's a shame. I build RC model trucks and am always looking for suggestions and role models. I'm very interested in the braking system in your truck, because it's in the RC model There are different sound modules for engine horn and brakes. However, there are no sound modules for smaller diesel engines with compressed air brakes and horns. Therefore, for some of my RC truck projects that are based on large pick-up trucks that are built as semi tracktors, it is important to know which ones There are brakes that don't make any compressed air noise. I know that there are electric trailer brakes in America, that doesn't exist here in Germany, we have hydraulic brakes for a total weight of up to 3 tons and everything beyond that is braked exclusively with compressed air. Kind regards, and I'm curious about the brake connections to your trailer
Thanks for watching, and for your comment. I'll try to help with your braking system question. I installed an air over hydraulic system in this truck. There are discs with hydraulic calipers on all 4 wheel ends. The hydraulic brakes are functioned with a conventional hydraulic master cylinder. However, the master cylinder is pushed with an air chamber, similar to what you would find pushing the air brake shoes on a large truck. On my truck there is just the one air chamber, mounted to the hydraulic master cylinder. The truck does make a characteristic air brake sound though. I have a quick release air valve mounted near the air chamber. When the brakes are applied, and then released, there is the quick sound of air pressure release that you probably associate with air brake systems from Class 8 big rigs. For future trailer setups, I'll be able to adapt to use either air trailer brakes or electric trailer brakes. Happy to try to answer any other questions, or let me know if this explanation didn't answer your current question. 👍
Thank you very much for taking the time and giving me exactly the right answer. That is the important thing for me to know how it works and even more important how it sounds, because as mentioned it is about the most realistic sounding sound module for them RC trucks to use. In your case with the hydraulic over air, as you write it, the compressed air brake would be the most realistic. Thank you for your offer to answer further questions. Good luck with your truck project, I will be happy to follow your progress on Joutube. If you have any questions about German trucks and technology, I will be happy to answer them. Kind regards@@hanscustomshop
I would love to know what HP your DD is putting out. Also your rpm vs. speed and lastly your mpg. As a retired "old school mechanic", I absolutely love what you did. Congratulations on a job well done! BTW. I am on the hunt for a 4-54 or parts. The only real DD 2 stroke (no exhaust valves). Thanks for posting your creation!
I'd like to know how much HP as well. I don't plan to do any dyno work, but I've been impressed with the power so far. With the 7A77 injectors and the upgraded turbo, I'd guess this engine has somewhere around 225 HP. I've had a lot of people ask about RPM vs. speed. Sounds like I need to do another video! Honestly, I've been thinking about how to do a good video that is focused on how to drive this transmission, and how the math works out for final ratios. The transmission has a 0.8 overdrive for 10th gear, and the rear end has 3.55 gearing. It'll cruise at 75 mph at about 2000 rpm. I'll have to report MPG later, as I haven't gotten to drive it enough to calculate it.
@@hanscustomshop Thank you very much for the feed back. Surprised at the 3:55's but a guy can easily drop down a gear or two if needed. Bet you are hovering at around 15mpg. empty and 65mph. Can't wait to find out.
@@hanscustomshop Thanks for the info. I’m working on a 53 Ford F600 using stock front axle with Chevy 1 ton rotors and calipers. Works good but the ride is terrible.
@@magnusbjornby9015 So far, I'd say my front axle setup is relatively stiff as well. I just don't have much room between the frame and the top leaf spring, so I wasn't able to get a typical suspension air bag in there. It works fine, and keeps the ride height the same regardless of load, but I wish it had a little bit softer ride.
Nicely built Hans! I have a 1990 Chevrolet K1500 Fleetside 'Heavy Half' ton pickup that was struck just behind the cab by a motorist who was traveling close to 90 MPH! The truck bed and the left rear axle are needing work. I will email pictures to your dad's email that your UA-cam link was sent
Very nicely done!!! I get it, hard to find the correct front axle but worried that it may be compromised to possible point of failure in the future as the donor axle has cut and weld and pretty sure its a forged piece. I sincerely hope it wont. I wish you would continue to locate a more suitable replacement or at the very least, please consider modifying the original 49 front axle and upgrade with all the modern wheel ends, brakes, and of course use the current leaf/air suspension that you assembled. Just worried about the axle integrity and overall strength. Other than that, one hell of a gorgeous truck!!
The modern axle was professionally Z cut, pre-heated, and welded. Wasn't like I went out in the garage one day with a saw and a mig welder. I have far more confidence in the modern axle. 👍
@@hanscustomshop Awesome to hear, I have seen a few guys do the later that you mentioned, just cut and MIG with no regard to conditioning before and after the repair etc.
You're answering a bunch of my questions as I'm doing a 46 International KB 10 with a 453 I would be extremely grateful if you could help me I'm lost Pioneer air brake system I'm using a 78 International cabover chassis that's all are break but it was gutted the air brake master system you have looks to be all hydraulic brake setup is that correct
Thanks Peter! This Roadranger transmission has a 0.8 overdrive for the 10th gear. The rear end has a 3.55 diff. It will cruise at about 2000 rpm at 75 mph.
Could you give some more info about the steering gearbox? Im working on a 1933 Dodge 1.5 ton truck and looking for options to replace the original frame mounted push pull style box.
Great question. I believe the part number for my particular steering box is D6HZ-3504-C and is listed as OEM for 1980 Ford C600, C700, C800, and C900 trucks. It is a HFB52 series gear manufactured by TRW. I used the OEM Ford steering arm, and had a custom drag link machined.
Thanks! I plan to drive it every chance I get. Grocery store, etc. In the next few months I will be mounting an old big rig 5th wheel hitch. Eventually I'd like to build a mini low-boy trailer to haul cars. 👍
You bet. I changed to a Masco gear reduction starter (MA-10882 I believe). It's much, much smaller and lighter than the original starter, and was the only way I could get this engine to fit inside the frame rails of the Diamond T. My flywheel housing and bell housing are SAE #2. Clutch is Eaton part number 107683-5. I don't have the part number for the flywheel. If you need help with these items I highly recommend Leid Diesel.
Thanks buddy. My original Diamond T steering wheel was cracked, so I ended up trying to find something close. I ended up with a new wheel that's designed for a 67-68 Chevy Pickup. The 3 spoke geometry isn't identical to the original, but it's a really nice wheel and works nicely with the column. The 2" diameter column is a 28" universal unit from Jegs. I welded a 2" shaft collar to the original steering column mount (attaches to the bottom of the dash)... worked really nicely. What are you doing for the steering gear? I bent my brain figuring that part out.
@@hanscustomshop Thanks, planning on using the stock Diamond T steering, connected to the ford steering box. I’m using a 2008 Ford F550 chassis and running gear. After seeing your steering column and wheel, I might do something similar. Someone used a cutting torch on the Diamond T steering column and shaft, so a far amount of work will be required to repair it. Then the next challenge is find a horn ring and button for it. Might be easier to replace it, but will have a good think on that.
Does that F550 chassis have the S110 rear axle? I really like that axle. Would have gone that route if I could have found a good donor with the right suspension setup.
@@hanscustomshop Yes, has the S110 with 4.88 gears. Will be running a ZF6 and Spicer 7041 behind that so I can have double overdrive. Plan on 22.5 rubber as well.:)
You said you cut 5 “ out of front axle i know just cutting is easy so how you put back together i know you welded it but how did u get it straight and true i have a 48 ford f6 im working on
I do a lot of welding, but I knew the axle was out of my league. I had a professional welder Z cut the beam, pre-heat, and weld the beam back together. I don't know exactly how he kept it straight, but he did a fantastic job and I have 100% confidence in the axle.
Great question. I spent a lot of time figuring this out. I ended up with a Be Cool 60037 radiator, which is designed for 37-39 Ford cars. It's nice and narrow, but I still had to work out a bunch of clearance issues. I had to get creative for the plumbing connections, especially the lower outlet. I'm using electric fans. So far it's all been working great, but I haven't pulled a load up a mountain grade on a hot summer day yet.
Man.... that turbo doin some screaming!! That ol girl wasn't even buzzin as high as she could but that turbo was singing the song of the people. Sounds amazing! What a build!
You're absolutely right... this engine is governed at 2800 rpm and I wasn't even close to that in this video. I'll be making some more videos with a variety of driving conditions... going to be a lot of fun. The Pulsar turbo has been impressive. I've seen over 20 psi of boost at full power and RPM. And plenty of turbo whine!
@@hanscustomshop very much looking forward to it! It seemed so effortless to spin the turbo up. A 4 banger Detroit normally really has to be going to get one moving.
The turbocharger quietens that screamin' Jimmy. In my 20s I ran an Etnyre Chip Spreader with a 4-53 without the turbo. Now and then the muffler would fall off, wake me out of my concentration on driving a straight line and scare the hell out of my helper running the belts and gates. It was loud enough with the muffler on.
This is one cool build out of a favorite brand of mine.
I am not usually a fan of patina and mortifications from original, but you did it right. What a fantastic job you did! Great videos too
Thanks for your comment. I agree... it is a fine line between improving and degrading.
that was amazing! the quality of detail, thanks
Bruce tucson
Beautiful! 🤩😎👍
I have seen those volvo power steering pumps used in a ton of late 60s early 70s ford trucks. It seems to be the go to pump for people doing conversions or restorations
In a sea of Cummins projects, I'm glad that it's different... 😂 you absolutely couldn't have said it better! I've enjoyed my 453T Suburban for 23 years now. Now I'm in a 6V project. Thank you so much for sharing all this!!
453T in a Suburban! Love it!
I have a 1979 F350 with a 453t jakes and a 6610
You’ll really like the V6…..I’d put a “natural” 6V53 with a set of 60’s up against any turbo 453 build out there. A turbo’d 6V53 with a set of 60’s @1.460 should met you in the 275 range @2800 and if you’re willing to spin it to 3,200 could have you at 300hp. From a 318 cubic inch diesel that’s pretty damn impressive. Of course if you can piece together enough 53a Jake masters, drones, bolts and bridges to add those to it you’ll have something even cooler. I had a chance to buy a C70 flat bed with a 6V53 that had a complete working set of Jakes on it for $3,500 a few years back…i passed because the truck was rough and I couldn’t see getting my money back for the motor, a clark 5 speed and an old Eaton 2 speed 21k rear end. Of course a few years later I saw a complete 6V-53A Jake “kit” that were functional but probably needed kits put in them and some wiring replaced end up selling for almost $5k on EBay…..FIVE GRAND. If you’d asked me a decade ago what 5 grand would buy, I’d have said you could get a really nice running silver 6V53TA for that kind of money….or even one of the aluminum 6V’s from the military boats if you could find one. It seems like prices on 2 stroke parts are really skyrocketing these last few years….which is great if you’re somebody that’s been hoarding them for decades, but not so great of you’re one of the dummies who sold most of your hoard before the market went nuts.
Thanks for sharing such a great project. Who doesn't LOVE the old Diamond Ts. I've always wondered why custom builders don't build a modern version. Again thanks for sharing Job WELL DONE !
WOW !
Absolutely love this build !
I am 75 years old.
I grew up around early hot rod cars and trucks.
Big conventional cab trucks always caught my fancy.
I have my own hot rod truck in the shop being built.
thank you for showing off the fine work you have done on your truck.
Thanks for your comment. Would love to see your hot rod truck build!
Great and very informative video! Thank you. The T is a masterpiece in engineering, love it!
Immaculate job ! The short shifts look solid and perfect on the in cab view! Keeping that Detroit in its power band! Again beautiful work !! 🤜🤛💯
Thanks for your comment. I'm still getting tuned up on the short shifts with this particular transmission. Eventually I'll get to short downshifts, but that's going to take a lot of practice. 👍
That splitter for the trans looks like its from a 13 trans good idea 👍
What a beauty! I love every choice you made. This would look amazing towing a period racecar
Agreed! I hope to build a small low boy trailer to haul my street rod. 👍
Love the Diamond T, the best looking trucks. Great work, a credit to your skills and attention to detail. Subscribed!
You're right about these Diamond T trucks. And thank you for your support!
A fabulous build Hans. A real credit to yourself and your talent. The DNA of the truck brining in you experience’s and memories of the past driving trucks blend perfectly.
I have just imported a fully restored 1949 Diamond T 306 from Florida down here to home in New Zealand. The truck arrives at our door this coming week. My intention is to customise the Diamond T in the same theme. However we have a Cummins 5.9 turbo going in. We do not have the earlier Detroit engines available here. Impossible to access for us.
Again a fantastic build and look forward to seeing more UA-cam content on Diamond T.
All the best Hans
Thanks for your kind comment! Sure is exciting to imagine your 306 arriving after such a long journey. Good luck with your modifications and I sure would like to hear more about it. I visited New Zealand in 2013 and had a lot of fun. 👍
Thank you for the reply Hans. I would like to send you a pic of the truck if possible. I am pleased you enjoyed your trip to NZ and had a great time. Regards Darren Buckley
@@darrenbuckley-j4o Darren, feel free to email at hans.custom.shop@gmail.com
I love what you did with the truck.I get so sick of seeing people take a heavy duty truck and put it on a 1 ton Dodge chasis.Thank you for leaving it full size.
Thanks! Let's keep big trucks big! 👍
Man, what an amazing build! Perfect choice for the drivetrain, in my eyes! Those 4-53T's are no slouch, and the 10 speed Ranger will let you get the best out of it. I'd love to see it hooked up to a nice drop deck trailer for hauling equipment and whatnot. Sure is nice to have the amenities of A/C, power steering, A.O.H. brakes, suspension control, etc. Looking forward to more of this little gem!😄👍👍👍
Thanks! And I do plan to post a lot more footage of the truck in action. I do hope to build a mini lowboy trailer for hauling cars someday. 👍
What you might consider is mounting the Jake switch on the upper side of your gear stick so with your hand 🤚 on the stick you can just drop your finger down and flick the switch 😉
This is my new favorite custom truck. I have a 35' Sundowner horse trailer with living quarters that I would love to have something just like this truck to tow it with. Man what a fantastic build.
Nice truck, looks like you didn;t compromise on any components or the cab and chassis....glad for the detroit instead of cummins 53 jakes another great find..
Clearly you deserve High Praise ....You set the level of energy on a project that is a guide for every builder.
I have seen many projects in my life, some better than others, but your project, the attention to detail, simply is outstanding.....In my mind you have achieved the highest rating to a project like this one and will remain the perfect example of engineering and design....God Bless you Fella,and thank you...
Nice job
Just a very nice , understated build. Love it and the detroit . 😊
Beautiful truck and amazing work. Your attention to detail and holding on to what you wanted, regardless of the challenges is just first class. You are a clever engineer and tenacious builder with great skills. Just brilliant
Thank you for the kind words!
Super great job!!!!!
I appreciate what you have done with your Diamond T and glad that you kept the original frame. I currently have a '47 Diamond T 404 project that I hope turns out as nice as your '49.
Thanks for your comment. I put a lot of thought into keeping the Diamond T frame or not, and I do think keeping it was the right decision. It's plenty strong. You've got a few more inches of room under the hood with your 404. What are you planning to use for the drivetrain?
@@hanscustomshop I actually have 1 1/2 1947 Diamond T 404s. I want to keep it as original as possible with the original drivetrain even though that means that top speed will be about 40 MPH. I plan to use the second cab, fenders, hood, etc. on a RAM 3500 dually with the Cummins engine. Yes, I know that it is common to use the Cummins but I don't want to over complicate it. With the RAM chassis and drivetrain I will be able to enjoy it at today's highway speeds. Sorry for such a long answer to a simple question.
Absolutely fantastic! I’m a big truck guy. Your build is amazing! Excellent engineering 😎
Thanks! 👍
Absolutely beautiful. Truly a top level professional build
Nice Job!👍
My dream is to do the same thing you did to create a daily driver, but my dream truck is a B-model MACK. You did a great job.
.
Love those B-model Mack's! I've looked at a couple of them in the past. 👍
You have one very nice Diamond 'T' Truck, my friend. If you get a need to sell it you won't have any problem doing that, I'm one of the potential buyers, lol. Everything you told us about the build is locked away right up here between my ears, such a wonderful job. Thank you so much for sharing this video with all of us. BTW, I am now a new subber, left a thumbs up, and a tap on the bell. Thank you again for sharing.
Thank you for the kind comment, and for your support!
You did a great job on keeping the old school look GREAT JOB 👍👍👍👍😎😎😎😎
Excellent Truck & craftsmenship you have some amazing skills choosing an Diamond T as your chosen subject I think is supreme and I admire attention to detail and happy to see you chose an old school 13spd Road Ranger instead of 20:58 takeing the easy way out like a lot of people would have by dropping in a 5 spd manual or just doing a Allison Automatic
Thank you for sharing this beautiful truck.
Thanks for the reply / my plan on 48 ford f6 was a 12 valve Cummings but radiator and after cooler are so wide but thats part of a build is figuring things out / we come out to Colorado springs 2/3 times a year visiting daughter and grand kids would like to see the truck if possible
I couldn't even begin to imagine an aftercooler in my truck. I've already used every available cubic inch up front. But... I'm not trying to set any records with my truck. It runs great and has decent power... I'm happy. Let's definitely get together next time you're in CO. Colorado Springs is only 45 mins drive from my place. I'd enjoy meeting you and giving you a good look at my truck. Email me at hans.custom.shop@gmail.com or phone 303-884-9079.
Wow! Awesome job. Sharp looking truck.
Awesome rig
" Bad Ass"Best project i have ever seen.....Do you have an engineering degree?....You do now...God bless you fella
Thank you
Definitely one of the best comments I've had on one of my videos. And I do have an actual engineering degree. 🤣 Thanks for watching!
D*mn Hans you did a fantastic job. I have an old International Loadstar I am doing something similar with and most of the solutions
you used are what I am figuring to do to - right down to the same air bag and rear end setup. That Detroit sounds so nice I am half
thinking of canning the Cummins I already bought haha
Again really nice work.
@@MrMattsAdventures Thanks! Your Loadstar looks cool... I've always liked that body style. The Detroit is typically a "love it or hate it" kind of thing. They are cool and unique... but heavy, loud, and parts can be hard to find. Personally, I wouldn't do it any other way. 👍
Outstanding video and build! Thanks!
Nice job man looks and sounds great
Super cool project
should be very proud of yourself , I know I sure am , terrific job , keep it forever , I would
Thanks for your compliments. I do plan to keep it forever, and will enjoy seeing my son drive it someday. 👍
@@hanscustomshop so glad to hear that you plan on keeping it , that made my day , none like it , needs nothing , and should be on a calender for sure , God bless you and your family
I just love it
I wanted to do the same to a 1950,s white mustang.replaced gas engine with a 195 ci Cummings. Engine, ran out of money after a while sold. Miss that project. 😢
I hear you. There's no doubt that these projects eat time and money!
Super great job The 610 Roadranger I seen in the gillig school buses but never s RTO-610 cool
I had to search for quite a while to find this RTO. The overdrive is really helpful for highway speed. 👍
Can you do one of theses on your hot rod? That too looks very interesting….
Absolutely. Have that on my list of video ideas. Will try to put that together later this summer. 👍
Definitely super cool😊
That is one fantastic build, Sir! You did an excellent job!
I have a question for you, where did you get your custom instrument gauges from/at?
Thanks.
The gauges are from Speed Hut. It took some time, but I was able to get the font and layout to look very similar to the original Diamond T gauges. Then I drafted the Diamond T logo and was able to upload it for the gauge backs. 👍
Sharp Diamond T
I would have put super singles on the rear but fine looking truck.
Outstanding effort.
Amazing results.
One question: Why did you choose to not paint or powder coat the frame?
Good question. I wish I would have. Part of the reason I didn't is that I wanted to keep the truck old looking. I kept the patina on the cab, so why not the frame. The frame is in fantastic condition... not one bit of rust and there is even a lot of the original paint on it. But in hindsight, it would have been better to coat it black like all the parts I fabricated for the truck.
@@hanscustomshop
The new black will wear in with time.
Looks amazing
Hello, interesting well-made video, I love your truck. Here in Germany we don't have trucks like that, that's a shame. I build RC model trucks and am always looking for suggestions and role models. I'm very interested in the braking system in your truck, because it's in the RC model There are different sound modules for engine horn and brakes. However, there are no sound modules for smaller diesel engines with compressed air brakes and horns. Therefore, for some of my RC truck projects that are based on large pick-up trucks that are built as semi tracktors, it is important to know which ones There are brakes that don't make any compressed air noise. I know that there are electric trailer brakes in America, that doesn't exist here in Germany, we have hydraulic brakes for a total weight of up to 3 tons and everything beyond that is braked exclusively with compressed air. Kind regards, and I'm curious about the brake connections to your trailer
Thanks for watching, and for your comment. I'll try to help with your braking system question. I installed an air over hydraulic system in this truck. There are discs with hydraulic calipers on all 4 wheel ends. The hydraulic brakes are functioned with a conventional hydraulic master cylinder. However, the master cylinder is pushed with an air chamber, similar to what you would find pushing the air brake shoes on a large truck. On my truck there is just the one air chamber, mounted to the hydraulic master cylinder. The truck does make a characteristic air brake sound though. I have a quick release air valve mounted near the air chamber. When the brakes are applied, and then released, there is the quick sound of air pressure release that you probably associate with air brake systems from Class 8 big rigs. For future trailer setups, I'll be able to adapt to use either air trailer brakes or electric trailer brakes. Happy to try to answer any other questions, or let me know if this explanation didn't answer your current question. 👍
Thank you very much for taking the time and giving me exactly the right answer. That is the important thing for me to know how it works and even more important how it sounds, because as mentioned it is about the most realistic sounding sound module for them RC trucks to use. In your case with the hydraulic over air, as you write it, the compressed air brake would be the most realistic. Thank you for your offer to answer further questions. Good luck with your truck project, I will be happy to follow your progress on Joutube. If you have any questions about German trucks and technology, I will be happy to answer them. Kind regards@@hanscustomshop
I would love to know what HP your DD is putting out. Also your rpm vs. speed and lastly your mpg. As a retired "old school mechanic", I absolutely love what you did. Congratulations on a job well done! BTW. I am on the hunt for a 4-54 or parts. The only real DD 2 stroke (no exhaust valves). Thanks for posting your creation!
I'd like to know how much HP as well. I don't plan to do any dyno work, but I've been impressed with the power so far. With the 7A77 injectors and the upgraded turbo, I'd guess this engine has somewhere around 225 HP. I've had a lot of people ask about RPM vs. speed. Sounds like I need to do another video! Honestly, I've been thinking about how to do a good video that is focused on how to drive this transmission, and how the math works out for final ratios. The transmission has a 0.8 overdrive for 10th gear, and the rear end has 3.55 gearing. It'll cruise at 75 mph at about 2000 rpm. I'll have to report MPG later, as I haven't gotten to drive it enough to calculate it.
@@hanscustomshop Thank you very much for the feed back. Surprised at the 3:55's but a guy can easily drop down a gear or two if needed. Bet you are hovering at around 15mpg. empty and 65mph. Can't wait to find out.
Awesome build! Love the Detroit. What airbags did you use in the front?
That's a great question. I went through a lot of air spring data and found that the Goodyear 1B6-538 was a good fit for my application.
@@hanscustomshop Thanks for the info. I’m working on a 53 Ford F600 using stock front axle with Chevy 1 ton rotors and calipers. Works good but the ride is terrible.
@@magnusbjornby9015 So far, I'd say my front axle setup is relatively stiff as well. I just don't have much room between the frame and the top leaf spring, so I wasn't able to get a typical suspension air bag in there. It works fine, and keeps the ride height the same regardless of load, but I wish it had a little bit softer ride.
❤❤ that's perfect ❤❤
I love it
Nicely built Hans! I have a 1990 Chevrolet K1500 Fleetside 'Heavy Half' ton pickup that was struck just behind the cab by a motorist who was traveling close to 90 MPH! The truck bed and the left rear axle are needing work. I will email pictures to your dad's email that your UA-cam link was sent
Very nicely done!!! I get it, hard to find the correct front axle but worried that it may be compromised to possible point of failure in the future as the donor axle has cut and weld and pretty sure its a forged piece. I sincerely hope it wont. I wish you would continue to locate a more suitable replacement or at the very least, please consider modifying the original 49 front axle and upgrade with all the modern wheel ends, brakes, and of course use the current leaf/air suspension that you assembled. Just worried about the axle integrity and overall strength. Other than that, one hell of a gorgeous truck!!
The modern axle was professionally Z cut, pre-heated, and welded. Wasn't like I went out in the garage one day with a saw and a mig welder. I have far more confidence in the modern axle. 👍
@@hanscustomshop Awesome to hear, I have seen a few guys do the later that you mentioned, just cut and MIG with no regard to conditioning before and after the repair etc.
Super cool
You're answering a bunch of my questions as I'm doing a 46 International KB 10 with a 453
I would be extremely grateful if you could help me I'm lost Pioneer air brake system I'm using a 78 International cabover chassis that's all are break but it was gutted the air brake master system you have looks to be all hydraulic brake setup is that correct
FYI, I replied to your email. Let me know if it doesn't come through.
Best thing l seen in a long time whats speed it cruise at revs how about mpg
Thanks Peter! This Roadranger transmission has a 0.8 overdrive for the 10th gear. The rear end has a 3.55 diff. It will cruise at about 2000 rpm at 75 mph.
Could you give some more info about the steering gearbox? Im working on a 1933 Dodge 1.5 ton truck and looking for options to replace the original frame mounted push pull style box.
Great question. I believe the part number for my particular steering box is D6HZ-3504-C and is listed as OEM for 1980 Ford C600, C700, C800, and C900 trucks. It is a HFB52 series gear manufactured by TRW. I used the OEM Ford steering arm, and had a custom drag link machined.
Very nice work. What do you hope to do with the truck?
Thanks! I plan to drive it every chance I get. Grocery store, etc. In the next few months I will be mounting an old big rig 5th wheel hitch. Eventually I'd like to build a mini low-boy trailer to haul cars. 👍
@@hanscustomshop looking forward to following your future progress/updates
That cool
Do you have any details on the flywheel, clutch setup, and starter gear setup you could share?
You bet. I changed to a Masco gear reduction starter (MA-10882 I believe). It's much, much smaller and lighter than the original starter, and was the only way I could get this engine to fit inside the frame rails of the Diamond T. My flywheel housing and bell housing are SAE #2. Clutch is Eaton part number 107683-5. I don't have the part number for the flywheel. If you need help with these items I highly recommend Leid Diesel.
Great video Hans.:) What steering column and wheel did you use? Thanks.:)
Thanks buddy. My original Diamond T steering wheel was cracked, so I ended up trying to find something close. I ended up with a new wheel that's designed for a 67-68 Chevy Pickup. The 3 spoke geometry isn't identical to the original, but it's a really nice wheel and works nicely with the column. The 2" diameter column is a 28" universal unit from Jegs. I welded a 2" shaft collar to the original steering column mount (attaches to the bottom of the dash)... worked really nicely. What are you doing for the steering gear? I bent my brain figuring that part out.
@@hanscustomshop Thanks, planning on using the stock Diamond T steering, connected to the ford steering box. I’m using a 2008 Ford F550 chassis and running gear. After seeing your steering column and wheel, I might do something similar. Someone used a cutting torch on the Diamond T steering column and shaft, so a far amount of work will be required to repair it. Then the next challenge is find a horn ring and button for it. Might be easier to replace it, but will have a good think on that.
Does that F550 chassis have the S110 rear axle? I really like that axle. Would have gone that route if I could have found a good donor with the right suspension setup.
@@hanscustomshop Yes, has the S110 with 4.88 gears. Will be running a ZF6 and Spicer 7041 behind that so I can have double overdrive. Plan on 22.5 rubber as well.:)
👋👍hola saludos desde chile 🇨🇱
Muy bonito camión yo tengo un reo 1951
Ver
Camión reo 1951 chile
You said you cut 5 “ out of front axle i know just cutting is easy so how you put back together i know you welded it but how did u get it straight and true i have a 48 ford f6 im working on
I do a lot of welding, but I knew the axle was out of my league. I had a professional welder Z cut the beam, pre-heat, and weld the beam back together. I don't know exactly how he kept it straight, but he did a fantastic job and I have 100% confidence in the axle.
Roughly how much power are you cranking out of that Detroit
I figure with the larger injectors and the upgraded turbo this engine is likely around 225 HP and 450 ft-lbs
How did you get a radiator stuffed in that narrow front nose / are you located in Colorado
Great question. I spent a lot of time figuring this out. I ended up with a Be Cool 60037 radiator, which is designed for 37-39 Ford cars. It's nice and narrow, but I still had to work out a bunch of clearance issues. I had to get creative for the plumbing connections, especially the lower outlet. I'm using electric fans. So far it's all been working great, but I haven't pulled a load up a mountain grade on a hot summer day yet.
And yes, I'm in Parker, Colorado
Cool. You didn't use a cummins like everybody else does.
The low ride look I believe came from purpose not looks some you see with chopped cabs and lowered for the mines
That’s a find custom truck heavy truck brother
As pretty as it is, you’re driving a hearing damage inflictor.
À. Çĺass. ACT! Keep ON..TRUCKIN