2012-2015 Mercedes Benz ML350 Oil Change
Вставка
- Опубліковано 23 гру 2021
- Most people don't change their oil this way anymore, rather, use the pump which is a lazy way of doing it and it doesn't remove all of the contaminants our of the engine like an old school oil change would do, draining everything from the bottom of the engine's "heart".
Watch the next video on how to reset you oil here and maybe get some useful tips and tricks on how to keep up with 5K interval of oil changes:
Engine Oil Filter Wrench - 84 mm, 14-Point - 1/2" or 24 mm Drive. - Навчання та стиль
I cut a hole in the underbelly pan to reach the oil plug . Been working great for years. They should of put a smaller little panel door or threaded cap under the oil plug. Anything besides taking out the plywood size panel just to reach a 1/2 drain plug
Might try that too
Thanks for the video! Which wheel riser ramps do you use?
I don’t know the name but they’re made of metal.
Saludos ..!!! Atraves de tu video "cooler oil om 642" he consequido desmontar el mio.Una pregunta,se pueden anular las mariposas de este motor?
¿A qué te refieres con anular? ¿Quiere dejarlos completamente abiertos? Si es así, sí puede hacerlo, pero tendrá que desconectar el motor y programarlo para que el EC no pueda volver a controlarlo. O simplemente puede eliminar las mariposas por completo.
nice job shqipe
Faleminderit vlla!
ku jeton
@@boostedtimmy Myrtle Beach, SC
Thank yoy
Just paid $188 for a oil change to my 2013 ML-350!
Problem is I have a 50k mike warranty so I want to be sure I don’t negate it by doing my own oil change. Looks like the manual mandates an oil change every 10k. I’m thinking I’ll do it every other time at the 5k myself. Is there a brand that Mercedes specifies for the oil? And what weight oil?
Yeah I do it every 5K myself as well.
If you go into “what type of oil to use” you’ll find yourself very quick in a endless rabbit hole. The fact of the matter is that as long you replace your oil very frequent you shouldn’t be worry about the type/brand at all. The main focus of each oil comes down to “longevity” as in how long can the oil provide lubrication before it brakes down. Doing it every 5K doesn’t even touch the spectrum of bad oil much less the good oils.
So, don’t worry about it.
My brother can you help me out please. I did oil change perfect and put the oil filter cap back on with the seal correctly and I notice I tiny tiny drop coming from the oil filter cap... I changed the seal and still !!! You think I need a new oil filter cap ?
Hmm 🤔 does the oil keep coming out? Did you wipe it clean? Maybe there was some extra residual oil that was leaking…
If everything was good and it’s still leaking like you said then, yeah, you probably need a new filter cap. Try to get one from the dealership and check if they accept returns, this way you can see if the new filter will leak too and if it does, then you know it’s not the cap and you can return the cap back to the dealership.
@@AlbanianFix yeah before wasn't leaking until I changed the filter and I must of over tighten it. Than started leaking slowly ! So I changed the seal and retighten it and still tiny bit leak coming from the cap. So anyway thank you brother !! I just ordered a cap from FCPEURO for 30 OEM. Dealer wants 70 lol
@@onyx0076 Nice! Let me know how it goes.
thanks for the video. what size is the filter wrench?
Engine Oil Filter Wrench - 84 mm, 14-Point - 1/2" or 24 mm Drive.
@@AlbanianFix awesome! thanks!
Shqipe, will you make a video of om651?
Shqipe, është e vështirë të gjesh makina të tilla këtu në Amerikë. Kanë shumë pak modele me naftë këtu.
Hello Can you please provide me with the oil brand name please. Thank you in advance.
I have another video that shows exactly what I use for my Mercedes vehicles.
ua-cam.com/video/B1CCUaEzSuw/v-deo.htmlsi=3tXSW1ObCPtHNTFL
Lucky wife❤
You should remove the oil cap before letting the oil out from underneath. This allows air to flow in and the oil to escape much easier. And I never ever use a pump! I €{£}^~€{‘ hate that pump!
So many shops refuse to open oil pan drain bolts anymore. All because of overzealous lawyers and customers trying to sue and blame them for lack of maintenance.
Oh wow I didn't know that. So they'll just use the pump instead?
@@AlbanianFix yes. They say it's for legal & cost purposes. They're tired of having to pay for new drain bolts and especially oil pans and further problems like leaks which lead to having to replacing whole engines.
@@DominiAeternum Oh I see...never thought of it from that aspect. Thanks DominiAeternum !
Why so upset?
Lol 😂 nah it’s all good…
…but that F**** pump though…
I cut a hole in the underbelly pan to reach the oil plug . Been working great for years. They should of put a smaller little panel door or threaded cap under the oil plug. Anything besides taking out the plywood size panel just to reach a 1/2 drain plug
Oh that’s a cool idea 💡