monorim MF0 front suspension for Segway F20/30/40 eSeries all 2022year
Вставка
- Опубліковано 17 жов 2024
- purchasing link : monorim.store/...
MONORIM : manufacturer of unique creations for eMobility...
step1 -step3
monorim MF0 front suspension for Segway F20/30/40 eSeries all 2022year
purchasing link: www.monorim.store
items: MF0
Thank you this video was helpful. I was able to fit this to a D18 scooter without needing to disconnect the front wheel motor wires.
Nice mod and the scooter feels much smoother to ride now. Took about 90 minutes only. Easy upgrade thanks Monorim
You are welcome . Us pleasure
thanks for the tip, I'm about to tear my D28 down wile I'm waiting on shipping.
Bonjour j ' ai fait l ' installation sur une Ninebot F2 mais l ' amortissement est vraiment tres faible voir inexistant le ressort d ' origine est rouge . D ' ou peux venir le problème ?
Having just done this install, here are few my key points if your planning on doing this yourself:
1) If you’ve never, at the bare minimum changed a tyre on a car, best avoid this or pay a professional to do it for you.
2) If you’re happy to snap the plastic faring you can skip the first step of disconnecting the electrics. It’s a little bit more fiddly but still achievable.
3) The wheel nuts have been tighten beyond Herculean strength and the supplied wrench is inadequate to crack it. Would recommend a mutli/ vice grip and a can of WD40 will do the trick.
Herculean strength is almost an understatement.
I needed to clamp the shock absorber a little so the top pin would go all the way through. The tyre valve was scraping on the inside of the fork but after tightening the wheel nuts it seemed ok. I didn't need to cut the front guard either, it just tightened down into the right position. No washer is supplied for the replacement guard bolt so it was necessary to use the original washer and it is very difficult to remove it from the original bolt. Putting the motor cable back through was the hardest thing.
no need, I am afraid you using the thick washer at the bottom lead problem happened ,
pls make sure thin washer at the bottom , and the thick one at the upon , then it is ok , you could also check our youtube video more seriously
Buy the xlock in our official store pls
Hi, I’m having issues with installation.
When I go to push the shaft through the support frame there is freeplay with the bearing and additional plastic clip/spacer.
I feel like the channels cut down the side of the suspension shaft aren’t long enough as the C bracket that sits over the top that you push over the turning shaft sits too high and doesn’t clamp down on the bearing/c clip.
Is this a common problem? Has a spacer been left out?
hello , check this picture link , it is more important let you know the washer thiner at the bottom , the thicker washer at the upon , drive.google.com/file/d/1847P-IsNZKmifQGzdAcnEGTJukh_iYft/view?usp=drivesdk
@@Monorimofficial Thanks, after a phone call with the company I purchased the suspension from, we figured out it was the wrong type for my scooter. Right box but the wrong product was in the box. I'm waiting to hear back from them about sending out the correct product.
Does it work on the Segway Ninebot F25E?
yeah
Welcome Monorim fans to join the Monorim fans group.🥰
✅Here you can get all the guarantees, service support.
✅Indefinitely updated discounts and welfare activities.
✅Here, you can discuss the fun of modifying scooters with other modification enthusiasts.
✅Join now~
Enjoy the unique pleasure of modifying.
💞Now！ there is even a 15% discount code for you to use.
chat.whatsapp.com/IYWOaXpyM240w6WAmkvB3A
t.me/monorim_group
Need more reviews and test on this one.. 🙏
Hello is there a rear suspension for this model?
hi , it is in our schedual reseaching jobs , will release sooner , you could following our official store :
www.monorim.store
get discount code : Jack00790 to get 10% discount for all your purchasing goods
I got a d40x I'm looking at it looks like it might work
Let me know if it works, I also have a d40x. It seems like there are no upgrades for it at the moment.
@@XxDuCeWaRd713xX will keep you updated
it could be work , like this show , D/F their frame are same , color different only , don't mix max
it could be : same construction as F40 series . pls check this upgrade parts :monorim.store/collections/segway-e-d-series-f20-f30-f40-d18-d28-d38
Will that work for the F 65?
Not once u break it
I think this is a mod best left for a professional to install. If you mess up the wiretry at all you have a dead unit that won’t be warranteed due to after market upgrades….
🛒🤴You could directly purchase from our official store:
www.monorim.store
📲Seller contact :
A1,
Index whatsapp link to seller manager
WhatsApp number : +86 176 0206 0946
A2,
Bilo02@monorim.cn
And show him discount code of your purchase items :
5% discount code :Jack00795
Or you could offer your email address and WhatsApp number to here , we let seller contact you right away.☺️
It's a pity that you have to carve the guard joint, so it can't be restored to factory (undamaged) condition in case of a warranty problem. Also, I don't understand how the bolt washer was left off on one side of the engine shaft. I may wait and see if there will be an upgraded 2023 model.
🛒🤴You could directly purchase from our official store:
www.monorim.store
📲Seller contact :
A1,
Index whatsapp link to seller manager
WhatsApp number : +86 176 0206 0946
A2,
Bilo02@monorim.cn
And show him discount code of your purchase items :
5% discount code :Jack00795
Or you could offer your email address and WhatsApp number to here , we let seller contact you right away.☺️
I agree. Seems strange. Plus no torque settings given for bolt tightening. And don’t get me started about using a thumb wrench!
can you do it with the cable that keeps connected?
Yes it is possible. I cut out the plastic casing with a thin metal blade
Just did the install and it is possible to skip the step of disconnecting the motor but it means you have to snip the plastic faring to get it on.
Need rear suspension for this model!
hi, it will release at the end of August
F65??
hi , it is for F20/25/30/35/40,,,D18/28/38/40
Mine has a headlight there and it will not fit
you could upgrad your max g30 scooter or xiaomi m365/pro 1/mi3 from our official store: www.monorim.store . discount code from our best support it is : jack00790 10% discount code
Is it the f40a? Coz it’s a reflector and you might able to remove it.
@@Dad402Lyfe I’ve recently got a new scooter but have a new problem, I replaced my tire on my motor but now it’s going way faster which I’m not complaining but sometimes just shuts off and doesn’t turn on for about 20 minutes
Nobody asked u that
Шайбу выбросили с оси колеса, колесо будет истираться. Крыло подрезали, т.е. оригинальная конструкция нарушена. С истиранием проводов мотор-колеса тоже вопрос. Очень хорошо бы подумал, прежде чем ставить такое.
🛒🤴You could directly purchase from our official store:
www.monorim.store
📲Seller contact :
A1,
Index whatsapp link to seller manager
WhatsApp number : +86 176 0206 0946
A2,
Bilo02@monorim.cn
And show him discount code of your purchase items :
5% discount code :Jack00795
Or you could offer your email address and WhatsApp number to here , we let seller contact you right away.☺️