BMW Brake Light Reset Rear Brakes after Pad and Sensor Replacement Video
Вставка
- Опубліковано 19 жов 2024
- 3 Series BMW Reset Brake Light. In this video i will show you how to reset the brake light after you change the pads and put a new brake sensor on. Basically as the brakes wear a sensor wears out and triggers the check engine light. The sensors are one time use and there are work arounds to bypassing it but honestly it's pretty cheap so best to get a new sensor. After you put it all back to together you perform the reset sequence as shown in the video and you should be good to go. Ignore the other light in the video, it is just my emergency brake light which is on at the time. This should work on most 3 and 5 series including the 328i, 335i, 528i, and 535i.
You can pick up the sensors on amazon on the cheap and other BMW Parts
Front Sensor
www.amazon.com...
Rear Sensor
www.amazon.com...
Other BMW Stuff I recommend
www.amazon.com...
👨👩🦱👨 Follow Me 👨👩🦱👨
CryptoSlo Website ► www.cryptoslo.io
UA-cam ► www.cryptoslo....
TELEGRAM ►t.me/Cryptoslo...
LBRY Credits ► lbry.tv/@Crypt...
TWITTER ► / bitcoinslo
FACEBOOK ► / bitcoinslo
🎁🎁 Get The Gear 🎁🎁
Official Merch ► teespring.com/...
CryptoSlo Amazon ► amazon.cryptos...
📊📊 Trade Crypto 📊📊
Binance United States:www.binance.us...
KuCoin: www.kucoin.com...
CoinBase www.coinbase.c...
📈📈 Trade Stockes 📈📈
Robinhood (Buy-Sell Stocks): join.robinhood...
Webull - Receive ONE (1) free stock! act.webull.com...
💲💲💲 Get Some BitCoin 💲💲💲
Lolli - Earn BTC Rebates while you Shop lolli.com/ref/...
CashAPP : cash.me/app/XD...
🌈🌈🌈Tools I Use🌈🌈🌈
SNAPPA Thumbnail Creator: snappa.com/Cry...
If You’re Not Talking Gains, Then Were Not Talking. :-)
❗️❗️❗️ DISCLAIMER ❗️❗️❗️
The content in this video references an opinion and is for information and entertainment purposes only. It is not intended to be investment advice. Seek a duly licensed professional for investment advice.
Edited With : Camtasia
#bmw #e92 #brakelight
#passiveincome
#HowHeDoIt #CryptoSlo #CryptoCurrency #BitCoin
Get The Sensors!
Front Sensor
www.amazon.com/dp/B01AWY395Q/?tag=howhedoit-20
Rear Sensor
www.amazon.com/dp/B071VDT5V1/?tag=howhedoit-20
Other BMW Stuff I recommend
www.amazon.com/shop/howhedoit/
Don’t forget there are only 2 brakes sensors for the entire car drivers front and rear passenger …..they are length specific and soooo easy to change out …..
mines does not reset
If you try to reset the light and you get _ _ _ _ _ after reseting and the light does not extinguish, you need to change the sensors. I had this problem. I changed both front and rear pads and the sensors (got them off of ebay for $25 total, non OEM). Once I changed everything I followed the video and wholla... worked perfect. No more lines, light was extinguished and gauge was reset to 32,000. Thanks Mark you the man... !
Daryl C I replaced mine and still get ------- frustrating as hell.
THANX! Your's was the only video that included thee very important first step, push the BC until you get the time and mileage. Other videos I watched left that out and frustrated the hell out of me.
Dude. Thank you so much for this video. My dad has spent hours trying to get his brake sensor light to reset following all the crazy UA-cam videos out there. Cheers to you!
sure thing.
Thanks so much. Concise and the proper procedure. Thought I had done something wrong while installing the sensor on my 328i, but the other video I watched showed an incorrect method. Saved me a trip to the dealer.
Glad it worked!
I would like to thank you for explaining that very important step, push the BC until you get the time and mileage. I tried so many times watching other videos, AND NOTHING. Finally I saw your video and got the pad wear cleared in my 2013 M3. The dealer wanted $90.00 to do it. I did have an extra step when I started the car the next time, to click OK in the vehicle status, but all the trouble because I put new StopTech BBK on the car. Thank you so MUCH for your video!! Now you ask how did I get the light to reset with no indicator? EASY, use a dolphin splice for telephone wire. You dont even have to strip the wire and twist, just slide over the two wires and compress with pliers, it makes great contact and completes the circuit. Thanks again
After 9 year’s still great video and awesome tutorial thanks you saved my life.
This is the correct one for a 328i 2008, finally after looking at all types of different ways, this one actually worked! Thanks a million!
Watched other videos on how to reset brake fluid light. Every other one was way wrong. Yours took me 45 seconds to reset it. Thanks!!
Mate your a hero. Had watched a few vids before seeing yours. They didn’t work . Yours did first time. Clear simple on the money instructions. Thanks very much
Thanks. Worked for me. Much appreciated. One thing that was different for me though is the part at the yellow triangle. I had hold the odometer reset down and in about a two second window hit the BC button to get to reset. If I held it too long the triangle went away, if I let go of the odometer reset it started me over. So for those of you who can't get it to reset, hold odometer reset down and as soon as triangle appears hit the BC button(with odometer reset still depressed). It should then enter reset menu.
great info!
Omg. Dude you are a genius. It worked for my 2007 335i coupe. After driving my car with the red brake light and the car on the lift. Very annoying, specially after knowing that my car didn't need the brake pads or the sensors.The brake light came on after I painted my brake calipers. Your method works 100%. Thanks for taking the time to make this video.
I made this work on a 2010 (e60) 528xi. I had to mess with it a bit but not much! I had already replaced the brake pad sensors. Thank you!!!
Saw so many videos but yours was the only one with accurate and adequate presentation ..finally reset brake fluid light on my 335i..Thank you!!
dude you are the mannnnn!!!!! i went to mavis to get the code cleared and the guy was talking about having to take the car to another shop that has a more advanced machine to clear it blah blah!. i have new pads ans sensors and was still getting the brake light and no reset.....I knew it was a simple task and after watching this video it worked like a charm!!! thanks so much +HowHeDoIt
I changed my discs and pads + sensors all around. I have reset them before, however, I forgot the procedure. Watched this, followed as you a stated and it worked. Thanks a lot! (BMW E90 335i)
Thanks for posting this Video Mark. My 2011 BMW 323i had the same issue even though I had new brake pad. I just got it reset after watching your Video.
Man your the BEST!!! thank you so much!!! I've been trying to fix this light for 3 months now!!! I change front and rear brake pads and sensors, and the brake light didn't reset after trying to reset it the way I was told on other sites and vidoes. This is the only one video that worked for me. You are a genius!! Thanks so much
Thank you for a quick and clear vid! Only thing missing was you have to have the doors shut!!!! Thanks again!
Thank you so much I spent plenty of days trying to reset the brake sensors your video was very helpful thanks again
Very helpful. I had to press the BC button until the rear brake image appeared and then selected reset for it to work (not just pressing BC button once) thanks - worked like a charm!
congratulations friend I have gone to 3 different places in Mexico and they couldn´t do what I just did in 1 minute and all thanks to your video i have a 325i 2012 and it had the same problem with the new sensor, thank you so much you are a genious or at least you read the bmw manuals.
Thank you so much!! Was struggling with the sensor for about 4 hours. This totally fixed it on my E87. Cheers from Sweden 🇸🇪👍🤙🍻🙏😀
Thanks man, the only clear video about the procedure, works excellent!
+Jorge Conejo glad it worked for you
+Jorge Conejo glad it worked out
Great job mate. Did a service used a Launch OBD and a Bosch OBD neither would clear. Just changed front pads and discs inc sensor, watched your vid and hey cleared the lot :-) thank you.
Worked perfectly on my 2008 328xi Coupe. Thanks!
Craig Valois great to hear.
Great video! And if BMW is reading this, how about being able to go to the menu and select service, brake pads, and reset: yes/no? Why does it have to be so freaking complicated? Really starting to HATE BMW. I've owned a 2002, multiple E36s, E39, E83 and now this E84.
my friend was driving with this problem a month and keep asking me clear it with diagnostic tool. nice video
Thank you 🙏🏼🙏🏼🙏🏼🙏🏼 the number of headaches I got from other videos. Yours saved the day thanks man ! Blessings
Excellent job .
Thanks for sharing.
This is the real reset action.
Hey, it looks like your actual brake light is still illuminated at the top. Did it go away after you started the car up? Thanks.
Worked perfect. I watched a few other videos with incorrect info and I was getting frustrated. Wish I saw this one first.
Thank you for the great video. I was watching other videos and no one else explained it correctly like you did that you .
Well you get a thumbs up from me I have an E46 just cleared the error codes on the ECU using my phone the brake light still didn't clear, just held the BC button down while one switch the ignition with the key I think this did it, cleared the brake light anyway so for me your video helped so you get a thumbs up.
It worked for me THANK YOU.
actually, i did not replace the pads, just the rear ensor. When the light came on, i checked the pads and noticed there almost new....so did not replace them just the sensor which btw was $18 at autozone......it worked like a charm...thanks you saved me a couple of benjamins...
Im guessing the previous owner did not reset on replacement.
Yes finally got it done on my E93 325, legit info thanks
My 2007 showed the front of the car in red instead of the triangle . Thank you for posting this ! .
Nicely done, thank you for taking the time. Just executed perfectly on a 2010 328 x drive. Saved a lot of time. Much appreciated.
FINALLY! Jeez! Thank you man. 2010 BMW 328i
Lol I’ve watched so many videos and this is the only one that works
btw, to actually DO the reset on each option, once you finally are able to reach the reset menu, you choose what option you want to reset one at a time. Choose the selected option, then you HOLD IN the BC button until it indicates it is actually resetting. A clock type indicator will show up as it resets and you then move on to the next option you want to reset.
Thanks bro best explanation yet others are difficult to understand or just plain wrong.
Perfect. Concise. Helpful. Thank you
Why dislike this video this was very helpful. THANK U
Thanks. This was the best explanation!! Tried all others and did not work!
Thank you very much, according to your method, I success reset my E92 335 brake light.
Noice.!
thank you I havead all my pads and. sensor replaced and needed to get the light of my dash .👍🏾
Bro saved me 120$ to get it reseted in a shop 😮💨
Thank you. I just changed the pads and rotors. This worked for me.
thank you for making this very simple!!!
Hi mate hope you doing well
I have done your way it’s work ok
But the problem I have while I press the reset Botton the little clock is rotating it’ come with this sing ( mil - - - - - - ) it doesn’t give mileage ?????
Many thanks, this worked on my right hand drive 320d in australia too!
Only problem is that while the light has home away it only reset the kilometer counter too 16,000 for the rear breaks. In reference the fronts after they got replaced say 80,000.
Excellent video. worked perfect on my 2007 BMW 328i. Much thanks
THANK YOU VERY MUCH. YOUR VIDEO REALLY HELPED ME
Thank you. I replaced the sensors this was easy and fast for the rest....
Great video - having replaced both the front brake pads and wear sensor I've just reset the front brake pad wear warning indicator first time on my 2009 UK spec 318d E91 using this procedure. Many thanks!!
It's actually different for the 5 series you hold the reset button on the left bottom part of the insrtument cluster not the BC button
good tip
This worked for my E87 120i when Carista didn't! Thanks
I also have found that this works fine if the car is running. You can crank the car, wait for warning lights to turn off waiting for gauge to reach where it indicates outside temp, THEN hold down odometer reset. Orange triangle will appear after a few seconds, THEN hold in BC button and momentarily you will enter reset menu.
Don’t forget about the 2 brake sensors for the whole car….front driver and rear passenger and they are length specific and SUPER easy to replace ….shout for any questions
What's meant the word "BRAKE" yellow light on?. Fluid, pad, rotors or parking brake warning? Please help.
Thanks.
Parking brake
@@CRYPTOSLO_OFFICIAL when the car is parked is red, if i put the brake down, all the time is yellow , i don't know why.
Thank for your response.
Perfect! In fact, I wish I'd found this earlier, I bet my original sensor was still good
I have a 2008 and this steps worked. Thank you.
Yay! Worked for my 2008 335i. Thank you.
Thank you tons I was going mental!
glad it helped!
I have a 335i 2007 and I had a mechanic look at my break pads and they are good but the break light appears in yellow is this early warning about my break pads, if so I still would like to reset my break light will this work I'm my car? Also how much would a new sensor cost for my break pads?
Great video .ASE certified , kept getting the rear wear sensor code . checked resistance , continuity . would clear with Snapon ot Autel and would come back in 1 second . Nothing worked except this method which I am led to believe is a mileage bug put in with a rouge code on purpose .
Thanks Mark, worked like a charm on my 2009 128iC!
Awesome.
Excellent, simple as that! Thank you v.much!
Thank you so much! Worked perfectly on 2009.
Yep, worked. Been trying this for hrs but this video worked lol
What are some good reliable break pads and rotors you guys recommend I think OEM price are exaggerating a bit but I don't want to get anything that will give me problems in the future I got an 09 328i coupe
Thank you sir. Your trick saved me time and money. BMW is cool to drive but one of the worst for user friendliness and repair.
M B for sure. Great way to save money is with mhd ap to read your own codes and reset.
Muchísimas gracias amigo. Tu información me fue muy útil y efectiva
Thank You! That's a proper way to reset it
Worked first time thank you.
Is there any difference between a 2009 328i?? Because I'm having the same problems with my BMW
Great video! Short and sweet and correct. Many videos and websites try to address but most are wrong. Thanks for posting video!
Thanks Mark! I'm working with a 2008 X3 and it goes somewhat different but I had no idea what to do and I figured it out based on what's shown in your video, so thanks a lot for that.
Hey buddy, I have the same car as yours with the same issue! X3 2008. How did you fix it as it is not as the video!
@@krahnama Fix what?
I tried it didn't work on my 335d, it gets to reset but it stays clear won't show mileage, and lights still on. any suggestions. i know brakes are good.
Did you hold the BC stalk in for 3 seconds until the timer appears?
thanks, straight forward and fixed
If it worked how come the "brake" light didn't come off ?
Thats the Ebrake. :-) It's on.
CryptoSlo for some reason it worked for me THANK YOU !!👌🏾
I used this method to reset the rear discs, thanks a lot 👍🏽
Hi mark, I did everything you said on video a few times but I’m not able to clear the brake light. Do u need to drive car after or am I doing something wrong. I hope you can help me or someone else please
Did you change the sensor when you changed the pads?
Mark, I have the same BMW in the video and I'm having a problem resetting the brake light. After I follow the instructions as shown and after the resetting of the breaks there are no miles for the next change it reads ---------! What do I need to do to get the number of miles back after I reset my break light?
Finally!!! I did it!! Thanks bro
This worked like charm. Thanks again.
Thank you so much! Hero of the week for me.
Thank you so much very helpful!
Bless your heart for making this video.
Can the car stay on whole performing this procedure, the bc or odometer button or toggle button doesn't function if the car is not on
hi mark most helpfull video thank you .i have done exactly same thing i manage to reset but kilometres comes back to zero not like yours yours ending up 43 000 mine stays on 0 any idea?
Thanks for your video Mark, it was very helpful.
This fixed my problem - i replaced both sensors and thought by driving it would go away. Nope not in the Bimmer... have to have a special sequence to fix.
Thanks a lot man it works for me. More blessings
Great video, thank you. Helped me reset my brake light
thanks a lot, your video really helped.
Great instructive video! I saved a bunch of $$$
Thanks for a great easy to understand video!!! ;)
My parking brake light stays on in the low lit yellow. When I pull the parking brake it turns red. It just never completely turns off. Any ideas? And great video, simple and easy to follow. Thanks man.