2006 Chevy HHR 2.4 LT. solving traction control light and wobbling steering wheel

Поділитися
Вставка
  • Опубліковано 8 жов 2024
  • 2006 Chevy HHR with a 2.4 LT disgusting on how I solved my traction control light problem Am I steering wheel wobbling a little bit left and right when applying the brake. please note this is just telling you the experience that I had and how I solved a problem does not mean it's going to work for your vehicle depending on making year and model. have any questions you may contact us or feel free to comment. our website is also added to our description.
    tip tip it's always best to replace your brake caliper first before your rotor to be sure what's causing your vibration and your truck should control problem. putting a new rotor on at the same time with the bad caliber can cause damage to your new rotor. so it's best to use your new caliber with the old rotor to see if that solved your steering wheel wobbling problem. if not, then you know your rotor is bad
  • Ігри

КОМЕНТАРІ • 21

  • @charlesmckenzie7101
    @charlesmckenzie7101 2 місяці тому +2

    You know you might be right about sticking calipers, because it does affect wheel speed, which is an input to the brake control unit. My mistake

  • @oldblueshhrchannel1847
    @oldblueshhrchannel1847 4 місяці тому +1

    I recommend changing the rotors and caliper brackets to the 2008 to 2010 SS non Brembo set up, since I did that on my 2007 LS no more brake shake, and don’t go cheap get quality parts!

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  4 місяці тому +1

      I had to change tires brakes rotors and steering rack for issue to go away

  • @FranciscoJimenez-bb7fk
    @FranciscoJimenez-bb7fk 5 місяців тому +2

    Still wobbles!

  • @danielsalazar4189
    @danielsalazar4189 10 місяців тому +11

    Just wasted 14:15 minutes of my life with this video

  • @albertoacevedo5465
    @albertoacevedo5465 5 місяців тому +2

    Put new brake rotors ventilated. Solved

  • @alexneil9116
    @alexneil9116 9 місяців тому +5

    Get to the damn point

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  9 місяців тому +2

      Point is the driver side caliber was bad so we replaced it. The problem went away after a few days and came back coming to find out it was the passenger side brake caliber that was sticking and that was causing the shaking in the wobbling and the steering wheel and it was not the steering rack as I thought it would have been

    • @KeithSrGoforth
      @KeithSrGoforth 9 місяців тому +2

      When you replace any brakes on your vehicle { always do both of them in the front or rear !🤪@@WorldWideMediaGroup1

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  9 місяців тому +2

      @@KeithSrGoforth my brakes on back are fine i already replaced the front brakes rotors and calipers i get what your saying

    • @dariosanmiguel4201
      @dariosanmiguel4201 9 місяців тому +1

      A 2006 malibu maxx 3.9 and i have similar check engine lights and my one rim is hotter than the other so i think thats my problem too

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  9 місяців тому +1

      it could be i have one vehicle before were the rotor got hot got wrapped out by brake caliper had to replace both including the brakes if your rotor is hot could be wrapped and done by damaged caliper never seen a light come on for that stuff. also listen for clicking or stricken noises smoking may occur if not already or damage hose. mine just sticking was solved everyone's problems are different
      @@dariosanmiguel4201

  • @blackent7513
    @blackent7513 3 місяці тому +1

    Sound like he don’t really know

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  3 місяці тому +1

      i did figure it out months ago

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  3 місяці тому +1

      steering rack was the issues before changes rotors brakes works for like 1 day. after replacing the steering rack issue when away

  • @wild8757
    @wild8757 9 місяців тому +3

    All that for a caliper hanging up SMH

    • @WorldWideMediaGroup1
      @WorldWideMediaGroup1  9 місяців тому +1

      Come to find out I did replace the driver side caliber wasn't the problem. I replaced the passenger side. The vibration the wall was stopped. I thought it was the steering rack because of worth. The vibration in the sound was coming from but it wasn't. FYI, my rotors and everything have been replaced and still had the problem before calipers were replaced

  • @scottshawn70
    @scottshawn70 5 днів тому

    This video would’ve been so much better if he wouldn’t have rambled and just made a two minute video and got to the point.🙄

  • @danrhyne2931
    @danrhyne2931 8 місяців тому +1

    dam boring as hell

  • @Greg-p3p3k
    @Greg-p3p3k 9 місяців тому +1

    😂