Bloody brilliant!!!!! Another modeller used fishing wire !!!! Not long term supporting and the use of. ‘Metal ‘rods are definitely a much better idea and much easier than the other modellers post , far , far to complicated and once again , metal rod is definitely a fantastic idea, thankyou!
I'm near the end of building this model, and the way I struggled with the assembling the original wheels tells me "don't try this". Looks fantastic, great job.
Thank you for these incredibly accurate videos! I couldn't get the metal wires and the aluminum tube... so I used sewing pins with their heads that I bent, and for the small nut towards the rim: from the network or telephone wire sheath. It doesn't hurt either. Congratulations again, you guided me.
I was building a 1:9 Protar provini matchless 500cc years ago and accidentally pushed my thumb through the front wheel breaking every spoke. I had to use legs from resistors to rebuild it. I still have it 30 years later
Great approach! But how do you eliminate the seam in the middle of the rim? It would be wicked hard to sand it with the spokes already in place… I have tried on a 1/6 scale bike, which is a bigger rim, so easier, but it took me an insane amount of time. Just curious!
今晩は🌓いくつかの動画でスポークの張り替えを拝見していますが、やはり一番息を飲む、kotaさんのモデル作りの真骨頂の作業だと思います😊❗️
嬉しいコメントありがとうございます！
You are a Master of discipline and patience!
I'll just go and add this to my big book of things I can't do! Brilliant as always and such an inspiration.
すごい👍 個人的に タイヤとホイールが1番大事なパーツなので最高です👍
ありがとうございます！！
kotaさんの動画がきっかけで自分も１/１２バイクを作るようになりました。
プラモデルってすごい楽しいですね！
今回の動画も、前の張替え動画より使用工具や材料などが細かく撮影されているので
非常にわかりやすく、自分も挑戦したくなりました。
次の動画も楽しみにしております！
嬉しいコメントありがとうございます！
今後の励みになります！
Your level of detail is incredible.
Beautiful to watch
Thank you !
fantastic
100% Professional
Wow、スポークの一本一本が産まれ変わって昇華している。
活きている。
奇跡の錬金術師みたいですね。
感動。
ありがとうございます。
ありがとうございます！
苦労した甲斐があります！
@@kotascalemodel
本当にありがとうございます😊
Kotaさんの作品、ゆっくり時間をかけて、すべて拝見させて頂きたいと思います。
good job
Thank you for sharing your skills. Your videos have inspired me to more realism in my own model builds.
やはり貴方は天才です❗
ありがとうございます！そう言ってもらえて光栄です！
Nice 👍👍👍
Bloody brilliant!!!!! Another modeller used fishing wire !!!! Not long term supporting and the use of. ‘Metal ‘rods are definitely a much better idea and much easier than the other modellers post , far , far to complicated and once again , metal rod is definitely a fantastic idea, thankyou!
Thank you !
I'm near the end of building this model, and the way I struggled with the assembling the original wheels tells me "don't try this". Looks fantastic, great job.
Just beautiful.
Good stuff. Great short. If you have the patience it's doable. Another brilliant channel
Thank you !
Thank you for sharing you have the link where I can buy that wire you are using
It’s in the dropdown
@@richmondtigers7495 thank you sir
Super ❤️
Dokładnie tego szukałem, bo chce zrobić model BMW R75 Italeri. Ten film bardzo mi pomógł. Dziękuję.
Dziękuję Ci !
Thank you for these incredibly accurate videos! I couldn't get the metal wires and the aluminum tube... so I used sewing pins with their heads that I bent, and for the small nut towards the rim: from the network or telephone wire sheath. It doesn't hurt either. Congratulations again, you guided me.
This focused tutorial style vids is so good! Thank you so much for sharing 👍👍🙏🙏
Thank you !
😍👍とても丁寧な作業！👏
ありがとうございます！
Thanks for sharing. Awesome detail. 🤘
Thank you !
Outstanding! 👍🏻
Awesome 😮
Que linda que ficou,👏👏👍👍👊👊😁😁🇧🇷🇧🇷
Excelente trabajo!
Great Video!!!!!! Thanks for sharing your technique.
Thank you ！
Many thanks for sharing this valuable skill !👍
Thank you !
A lot of nice spokes. AAAAAtjooooo!!
Спасибо. Тоже так сделаю у своего CB400 )
Luxusní . Klobouk dolů !!!! Smekám před Vámi.
Impressive. I doubt I'd have the patience to do this.
sbarashi kota san
Yees!
Nice 👍
Ultra cool very well done thanks so much for sharing this with us. 🙂Thomas over at The Model Hobbyist
Thank you !
Craftsmanship!
AWESOME....!
Incredible work! Such attention to detail and realism in your efforts. How long have you been building the scale models? Thanks !
Thank you so much !
I was building a 1:9 Protar provini matchless 500cc years ago and accidentally pushed my thumb through the front wheel breaking every spoke. I had to use legs from resistors to rebuild it. I still have it 30 years later
1:41 削りカスを飛ばす為に思わずパソコンモニターに息を吹きかけてしまいました
wow!
Great approach! But how do you eliminate the seam in the middle of the rim? It would be wicked hard to sand it with the spokes already in place… I have tried on a 1/6 scale bike, which is a bigger rim, so easier, but it took me an insane amount of time. Just curious!
Thank you for your comment.
I leave the seam on the rim as is.
毎回楽しみながら拝聴させて頂いております。ところで、キャブのエアファンネルで使用されているプラパイプの口径を加工される際、使用されている赤い工具？道具？ドリルみたいな物？あれはなんですか？市販されていれば教えて頂きたいのですが？
いつもご視聴ありがとうございます！
その工具は「パイプリーマー」というものです。Z1-R動画の説明欄にリンク貼っていますので、もしよろしければ。
Where do you think is possible to find the 0.8x0.4 steel tubing you show at minute 2:49. I live in EU (Ireland). Thanks.
Product links can be found in the video description section.
@@kotascalemodel Sorry! Many thanks!
度々拝見させていただいております。
私も見習ってスポークの張替えをやってみたいと思っているのですが、この動画を見て気になることが一つあります。
（表現が拙くてうまく伝わるかどうか不安ですが）スポーク端部がハブの裏側に回る場合、表から見ると小さな丸い円盤状のものがあるはずです。それは表現されないのでしょうか？
初めから丸い頭が付いてる虫ピンを流用すればそれも表現できるのでは？などと考えているのですが、まだ実行には至りません。
コメントありがとうございます！そこまで表現できればいいですね。
ところで、1/12スケールに合う細さや長さの虫ピンは、手芸屋さんとかにあるのでしょうか？
取り付け方も複雑になりそうで難易度高そうです。
Wow 🫡🇺🇸
Is this something you would do for someone?
でっかいサイズの自転車現物でもホイール組むのめんどくさいのに、プラモデルでこれをやるのか……
I’d like to see how to do 80 spoke rimes.
good morning please where can I buy the rods and tubes for the spokes on the Internet. Thank you
Ou peux t on acheter les rayons et les têtes de rayons? Merci de votre réponse.tres beau travail de votre part.
Les liens des produits sont dans la description de la vidéo.
自転車の実車でホイール組むよりも面倒なくらいですね。振れ取しなくてもいいのは楽かもしれないが・・・。
1/6はできたのですが、1/12は難しそうですね。今度頑張ってやってみます＾＾
コメントありがとうございます！
1/6は試していませんが、難しさは同じような気がしますよ。
How many millimeters are the two kinds of thin tubes？
Its on the video description: 0.3mm stainless wire & 0.8mm aluminum pipe, plus a link to a store that sells them.
Does anyone make 1/10 scale wire wheels for model cars? Please reply with leads.
what is that glue you used?
It is "CEMEDINE Instant Adhesive".
Added the product link to the video description.
外径0.8㎜ではニップルが太すぎる。