CarTrimHome LED Rear Tail Fog Light Lamp Review & Installation | 2019-2020 RAV4

Поділитися
Вставка
  • Опубліковано 23 сер 2024
  • #BulletSolano #BalazoSolano #2019RAV4 #Toyota #CarTrimHome #LightMeter #LEDLights #Lumens #Installation #DIY #HowTo #TailFogLightLamp #
    My Website www.bulletsola...
    cartrimhome.co...
    cartrimhome.co...
    cartrimhome.co...
    Craftsman Tool Set I use for all my jobs amzn.to/3hQOkeI
    This is the Camera I use for the Videos Sony RX100 amzn.to/35VIAhu
    Gratitude www.paypal.me/...
    Hi Guys and welcome to another episode
    if you have any questions please let as know
    Thanks for watching and don't forget to Subscribe.
    --------------------------------------------------FOLLOW ME---------------------------------------------------
    Follow me on Instagram
    @bulletsolano36
    Follow me on Twitter
    @bulletsolano
    Like my Facebook page
    / luis.b.solano.3
    Thanks for watching.
    Disclaimer.
    This video contains tips and recommendations only.
    Bullet Solano Shall not be liable for any harm, injury damage or if anything bad happens to your vehicle or property got in the process of repair and replacement due to use or misinterpretation of the information on this video.
    Keep in mind that if you buy low quality auto parts does not guarantee the adequate level of road safety.

КОМЕНТАРІ • 117

  • @eastexotic
    @eastexotic 3 роки тому +3

    That is a worthwhile upgrade. It makes a huge difference.

  • @deadarmdr2402
    @deadarmdr2402 3 роки тому +2

    You are great at this diy install on the Rav4. Simple easy to follow instructions with perfect explanations on why your doing what you have to do.I followed your vid for front led fog lights installation and they turned out perfect.I think i may be brave enough to try this install , they look awesome. And we are loving the our 2020 Rav4! New subscriber.

  • @i-..--..--..-i6985
    @i-..--..--..-i6985 8 місяців тому

    Thank you for the great video, dude! No fluff, no useless filler just straight to the point. The wiring color codes are GOLD!
    Did the wire taps come in the kit or did you buy them somewhere else? If somewhere else where and what are they called?

  • @vanessajean-poix3231
    @vanessajean-poix3231 2 роки тому

    Everything u do look so easy but I’m scared to try it on my own- but great job 👏🏾

  • @user-li7kl9du2z
    @user-li7kl9du2z 2 роки тому

    Hello, my friend, I have red, black, white and yellow.
    Your delivery varies.

    • @BulletSolano
      @BulletSolano  2 роки тому

      I’m not the company, I just make the video

  • @eliaspyr
    @eliaspyr 3 роки тому +1

    Thank you. Excellent video. Very helpful as always.

    • @BulletSolano
      @BulletSolano  3 роки тому

      Thanks

    • @eliaspyr
      @eliaspyr 3 роки тому

      @@BulletSolano Could you please tell me if you know what is the red cable for on the connector with the three wires? Mine only has 2 wires (remember I am in Europe so it may be different). I have ordered the 3 function one so I am a bit concerned while waiting for it to arrive.

    • @BulletSolano
      @BulletSolano  3 роки тому +1

      If I remember correctly the red is for the brake light and the yellow is for the turn signal

  • @tavoeltav
    @tavoeltav 3 роки тому +1

    Awesome video and tutorial! Thanks for sharing!

  • @colleentalbot7651
    @colleentalbot7651 10 місяців тому

    Hi I have a 2020 Rav4 Hybrid XSE. I tried installing these lights. I followed all of your directions and connected the wires the same way you did, but when I turn the car on, the lights did not turn on. The only difference was that I used blue cable splicers instead of the red ones you used. Could that make a difference? Is there anything else I could try to make them work? Thank you so much! Your videos are awesome and have really helped me to upgrade my car! This is the one thing I can’t seem to get to work.

    • @BulletSolano
      @BulletSolano  10 місяців тому

      Hi, make sure you have a good connection on the splice you did

  • @daryllmaegreen1028
    @daryllmaegreen1028 2 роки тому +2

    Hi. I just installed the same lights on my 2019 RAV4, and they look awesome! But now when I start my car, I get Pre- Collision System Malfunction, Secondary Collision Brake System Malfunction and LTA Malfunction. How to resolve? Please advise.

    • @BulletSolano
      @BulletSolano  2 роки тому

      Hello, did you have some wire touching? Check your wires

    • @antlocal80
      @antlocal80 2 роки тому

      I am having the same issue. Gonna pull it apart today. Its worthwhile to note that these lights do take on moisture which in turn can be causing all the malfunction lights to come on.

  • @JaredGant
    @JaredGant Рік тому +1

    After a few years, how are they holding up? Any issues?

    • @BulletSolano
      @BulletSolano  Рік тому

      Don’t know, I have a new RAV4

    • @JaredGant
      @JaredGant Рік тому +1

      @@BulletSolano oh, I thought you moved these over to the new one. Probably wouldn't have been worth it. That's kind of a big task. I've read about a few people getting water inside of these lights, and that's why I was asking how they were holding up for you.

  • @dorjitenzin762
    @dorjitenzin762 3 роки тому +1

    Till now how many times did you dismantle and assemble your RAV4

  • @joshsafari8709
    @joshsafari8709 3 роки тому +1

    Can you please tell me where you got those black exhaust covers?

    • @joshsafari8709
      @joshsafari8709 3 роки тому

      Never mind I found your other video on it !

  • @ivanchin6135
    @ivanchin6135 10 місяців тому

    The reflector lights on the bumper also got got signal lights as well or just brake lights?

    • @BulletSolano
      @BulletSolano  10 місяців тому +1

      Yes

    • @matrix-fh9tn
      @matrix-fh9tn 10 місяців тому

      Both signal and brake lights. But I didn't connect the turn signal wire. The red signal led didn't look right with the factory yellow/amber.

  • @kbimenc1
    @kbimenc1 Рік тому

    Hi men I bought one type bring four wire, black, red, white and yellow, I think the yellow one is for signals light, but where I need to connect that yellow wire?

    • @BulletSolano
      @BulletSolano  Рік тому

      I don’t remember what color is for the turn signal but where you have the turn signal conector try one of those wires

  • @lsbautista21
    @lsbautista21 3 роки тому

    Installed mine yesterday.. Thanks for this video for eased DIY video 👍

  • @jscotthager
    @jscotthager Рік тому

    I couldn't tell from the video if the wires you connected were of the same color or a different color.

    • @BulletSolano
      @BulletSolano  Рік тому

      Don’t remember but just do the connections on the cables I show

  • @yousufmirza1853
    @yousufmirza1853 3 місяці тому

    I dont know why you have to open rear the whole bumper you can put on lift & without taken out Bumper you can change reflector

    • @BulletSolano
      @BulletSolano  3 місяці тому

      Really? What about the metal bumper underneath the plastic cover??

  • @michaellindsey31
    @michaellindsey31 3 роки тому

    U. KNW WHEN U GET DONE WITH IT'S LOOK VERY OUTSTANDING GREAT WK😎

  • @michaelwitsoe3366
    @michaelwitsoe3366 2 роки тому

    So I have a 2022 LE and I think mine is a bit different

  • @hectorz7018
    @hectorz7018 Рік тому

    Las tengo por 3 años nunca la instale. Creo que ete verano le meto mano.. Funcionan como direcionales ??

    • @BulletSolano
      @BulletSolano  Рік тому

      Cartrimhome vende 2 tipos de luces, una que tiene para direccionales y la otra no

  • @dorjitenzin762
    @dorjitenzin762 3 роки тому +1

    Does it reflect when car is light is not on

  • @allyssoncarrasquillo7481
    @allyssoncarrasquillo7481 Рік тому

    how do you install the rear led fog lights on nissan kicks? , I want them to be dim when I turn lights on and brighter when I brake

    • @BulletSolano
      @BulletSolano  Рік тому

      You have to find the lights, probably with cartrimhome, ebay or Amazon! Depends on the year of your vehicle! Installation is the same way

  • @andres09cc
    @andres09cc Рік тому

    can i install this fog lamps on a rav4 hybrid 2022?

  • @DryUrEyesM8
    @DryUrEyesM8 3 роки тому

    I'm going to install plugs incase I have to remove the bumper again.

  • @hanyabi-habib8226
    @hanyabi-habib8226 10 місяців тому

    What size splice clips did you use???

  • @PhuongTran-mw3jd
    @PhuongTran-mw3jd Рік тому

    Hi, I have a 2017 RAV4 LE. I failed an inspection because they said my rear bumper lights were off, needed to replace. I went and looked at those but there’s no actual bulbs. They are just reflectors. Do you know what they meant by that? Or did they just lied to have me pay them to get the reflectors replaced? I would really appreciate if you could help!

    • @BulletSolano
      @BulletSolano  Рік тому

      You have a reflector with the reverse lights in it
      ua-cam.com/video/Z9J5ypbPVUs/v-deo.html

  • @mikelock4350
    @mikelock4350 3 роки тому

    Great video bro, thank you🤙

  • @patriotcanuck6485
    @patriotcanuck6485 2 роки тому

    Great install.👍

  • @jmw0368
    @jmw0368 3 роки тому

    Hi, please can you tell me if these LED replacements still have a reflector lens? As European vehicles must have rear reflectors by law? Thanks.

    • @BulletSolano
      @BulletSolano  3 роки тому

      Hi, no this is not for European vehicles

  • @joshsafari8709
    @joshsafari8709 3 роки тому

    Hello I just installed mine the same as you and my lights don’t light up when I brake, they stay the same brightness at all times? Any ideas what to do?

    • @joshsafari8709
      @joshsafari8709 3 роки тому

      Never mind I got it to work, needed to squeeze the clips more, also accidentally had on of the metal flaps not engage the T tap. I used t tap connectors by the way

  • @gabrielvalentino7629
    @gabrielvalentino7629 3 роки тому

    They look good bro!!!👍🏽

  • @albertrodriguez4745
    @albertrodriguez4745 3 роки тому

    Hi. I have a question for these lights, I have a an extra wire wich is yellow: where does that one go. I got black, red and white plus the yellow

    • @BulletSolano
      @BulletSolano  3 роки тому

      Hi, it goes to the turn signal wire, you have the sequential lights, they work as brake and turn signal

    • @albertrodriguez4745
      @albertrodriguez4745 3 роки тому +1

      @@BulletSolano Gracias mi Hermano por contestarme tan prontamente. God Bless . Thanks

    • @BulletSolano
      @BulletSolano  3 роки тому +1

      De nada bro

  • @wuyugaraje2365
    @wuyugaraje2365 2 роки тому

    Where do I buy or what is the name of the plug for that cables?

  • @luckyleo8751
    @luckyleo8751 3 роки тому

    are you going to install this onto your new RAV4?

  • @oscaralvarez9929
    @oscaralvarez9929 3 роки тому

    Hi. Are you think to add the OEM Tow Hitch ???

    • @BulletSolano
      @BulletSolano  3 роки тому +1

      Not at the moment, I have nothing to pull

    • @oscaralvarez9929
      @oscaralvarez9929 3 роки тому

      @@BulletSolanoGracias. Ordene uno para mi RAV4. Le instalare el bike rack
      Gracias

  • @manussriweawnetr9899
    @manussriweawnetr9899 3 роки тому

    hello my guy.. question, what kind of t taps you used for this project?

    • @BulletSolano
      @BulletSolano  3 роки тому +1

      Hello, I have this ones
      amzn.to/2QbdPzk

    • @manussriweawnetr9899
      @manussriweawnetr9899 3 роки тому

      @@BulletSolano thank you my guy very helpful. looking forward to future videos about rav4 👍👍

    • @BulletSolano
      @BulletSolano  3 роки тому

      No problem

  • @soulshower
    @soulshower Рік тому

    Nice.

  • @nazarettos6987
    @nazarettos6987 3 роки тому

    Does it act like turn signals also, or just brake light and running lights?

  • @ajdinmravic2331
    @ajdinmravic2331 3 роки тому

    Do it matter what trim of the Rav4 you have? I just installed these in my 2020 Rav4 TRD and they don’t power on. Any suggestions?

    • @BulletSolano
      @BulletSolano  3 роки тому

      What type of wire connectors you used?
      Make sure the wire are clamp the right way!

    • @ajdinmravic2331
      @ajdinmravic2331 3 роки тому

      @@BulletSolano the same ones you used. Could T Taps work?

    • @BulletSolano
      @BulletSolano  3 роки тому

      You have to press hard making sure the metal inside the conector goes to the insulation if the wire, but you can used any other wire connectors

  • @arsalanmirza354
    @arsalanmirza354 3 роки тому

    i have one question i buy this light but in my light have 4 wire cable where connect the yellow cable

    • @BulletSolano
      @BulletSolano  3 роки тому

      Turn signal

    • @arsalanmirza354
      @arsalanmirza354 3 роки тому

      @@BulletSolano do you have video ?

    • @BulletSolano
      @BulletSolano  3 роки тому

      No just make the connection on the turn signal wire

    • @arsalanmirza354
      @arsalanmirza354 3 роки тому

      @@BulletSolano so 4th cable colour is yellow and yellow cable connect the signal green wire or white wire because there two wire white and green

    • @BulletSolano
      @BulletSolano  3 роки тому

      @@arsalanmirza354 if I remember correctly is on the green, if not go to the other one

  • @papo862
    @papo862 3 роки тому

    do you know if the honda has a fuse for the alternator? all my lights on dashboard flicker when driving sometimes

    • @BulletSolano
      @BulletSolano  3 роки тому

      No, alternator or battery are going bad

    • @papo862
      @papo862 3 роки тому

      Bullet Solano both new what about ground wire

    • @BulletSolano
      @BulletSolano  3 роки тому

      Not only ground but check all the wires
      ua-cam.com/video/oedkB4Ykfis/v-deo.html

  • @stevanpetrovic5548
    @stevanpetrovic5548 Рік тому

    👍👍👍

  • @SimplyCali619
    @SimplyCali619 2 роки тому

    Anyone know if adding relay would work so it would also blink when using turn signals

    • @BulletSolano
      @BulletSolano  2 роки тому

      Cartrimhome has a set with another wire for turn signals

    • @SimplyCali619
      @SimplyCali619 2 роки тому

      @@BulletSolano I don't see it. I went through all 8 pages can you link me

    • @BulletSolano
      @BulletSolano  2 роки тому

      You need to ask them, because I get a second set for a client and that one has turn signal in it

  • @Chitown388
    @Chitown388 3 роки тому +2

    Don't buy these LED lights with the AMOPA brand name. Those LEDs have water condensation inside the light. AMOPA told me that their LEDs need heat ventilation. This implies that these AMOPA lights are NOT waterproof. Their recommendation is to remove the light to "air it out" ... as if removing the rear bumper to do this is a 2-minute ordeal.

    • @antlocal80
      @antlocal80 2 роки тому

      Mine are definitely taking on moisture. Love them just wish they were water tight

    • @Chitown388
      @Chitown388 2 роки тому +1

      @@antlocal80 When the moisture afftects the electrical in the light, it will disable your cruise control and a host of other features that depend on auto braking. I had to disconnect those lights to get clear out a ton of warning lights on the dashboard.

    • @antlocal80
      @antlocal80 2 роки тому

      @@Chitown388 that's what I'm dealing with right now

    • @antlocal80
      @antlocal80 2 роки тому

      @@Chitown388 took the car to Toyota and they said remove all the LED lights from the car which I've replaced every light with LED so I'm just gonna start with these because I can visually see they are taking on water. What use is a fog light if it takes on water 🤔

    • @Chitown388
      @Chitown388 2 роки тому +1

      @@antlocal80 I simply disconnected the wires to those tail lights and all the problems went away. It was too much a hassle to put those back to OEM.
      I had similar problem with the door handle bowl LED lights; which disables the power adjustment of the side mirrors. I put those back to OEM since they were easy enough to do.
      I left all my other LEDs alone, all the interior LED lights, LED fog lights, tailgate LED lights, etc. Those are not creating any dashboard lights for me.

  • @hanyabi-habib8226
    @hanyabi-habib8226 11 місяців тому

    You don't like messing with your car / electrical, but you have no problem drilling unnecessary holes into your bumper?
    You could have just ran the wire through the hole the reflector / light tab goes into...?
    Those lights look so OUT OF PLACE with your NON led tail lights. 🤷
    Also, most of these things are way CHEAPER on eBay.
    I just bought some rear bumper lights for $33 including tax. 🤗

    • @BulletSolano
      @BulletSolano  11 місяців тому +2

      😂😂😂😂 you’re like 3 years late to the party, I already have a new rav4 buddy!!
      But ok you get the cheaper stuff and you’re doing the same out of place LEDs with your non led taillights?
      😂😂😂😂 ok thanks for the unnecessary comment 😂