That is cool. I have a friend that has a MUCH SMALLER set up in an enclosed trailer that makes gutters. The metal comes in flat rolls like that and it comes out in the form of a gutter or downspout. It's cool that he can make every run as long as he wants them so there are fewer connections.
that's some clean roofing tar and gravel shoes get messed up shingling a roof takes years before that cement stops jumping at you getting all over and it wears your hammer head to a forty five degree angle wood took time to get the hang of flipping that 6 penny nail mud down tile never played it but mop dry in down for them but i do think standing seam wood be the best for sun will back out screws seamless gutters had to be the sweetest job down in florida most homes where one story that's it my rants done
Had a black 26 ga roof put on my house about 5 years ago. Crazy how flimsy the stuff is before it is formed. Probably wouldn't do black again due to the pollen in our area, i have 60 pine trees in my yard but thats what the wife wanted and it was the best color for us.
Roofed my dads house about 20 years ago in it best decision we made still as good as the day we put it on except where a limb fell off the pecan tree and hit it big limb dented it but didn't punch thru never leaked wouldn't use anything else if i could help it.
Glad To have A supplier ,In Our area , Hope to Do Business with Your Co. In the future . What Gages ??? Can You supply , Thanks For your great post on every thing From hunting & business etc
That is an AWESOME addition to your company!!!! The savings in less waste, will pay for it no doubt! Have a good 4th of July buddy, and God Bless all!!!!👍😊🙏🙏🙏🙏🙏🙏
@@HollisFarmsMS fair enough I work for a roof and rack deck company and we mostly run 30' long sheets I noticed the length of the bed before the tooling and was curious if you could run partially into the tooling before cutting the sheet or if you had to cut it before it got into the tooling. Thanks for the response, nice machine!
I have worked in sheet metal for 23 years but not really in the roofing type in air condition and heating ductwork i have done some metal roofs but not much
When I think of a metal roof I think of a standing seam. no Fasteners exposed that to me is about a metal roof . My great grandfather house was done 80 yrs ago and still standing, it was a standing seam roof . There is no screws with rubber washers that go bad
have you thought of portable rollforming units? i work for a company that sells and services portable units here in houston. would add another layer to your business being able to do it on site
What is the shortest panel can you roll ? I'm only asking because the company I work for uses a lot of metal deck and we have a saw to cut it . The saw can be a bit finicky but it does the job once you get used to it . We cut deck and grating with it . When we don't get the material cut to size . I have been to Canam in NJ many times where they roll the deck . Anyway I will leave a link for the saw . We have had this for maybe 10 years now . Good Luck with the new venture .www.patmooneysaws.com/grating-panel-bandsaw-machines/
Looks great your taking Hollis Roofing to the next level!!!!! Great stuff!!
👍🏽
Looks like a nice set up Brian. Happy 4th to all the Hollis Family!!
Thanks!
Making it in America! This country needs more of this. Good Channel good people. Keep it up.
🇺🇸👍🏽
Except the metal and machine. CHINA
Thanks Bryan that was great , please keep these type of vids coming they are so interesting
👍🏽
Thank you for doing a video on how the metal roof panels are made. Great video
👍🏽
Been doing metal roofs for about 20 yrs. Never seen it made. Great set up
👍🏽
Great video 👍 Brain! Very cool video to see roof panels made.
👍🏽
That was amazing I surely enjoyed that Brian I didn’t know they made it that way awesome video
👍🏽
Thanks for showing it
👍🏽
Like what yall are doing I worked a while with quality roofing and all state sub contractors. Y'all are top notch
Thanks!
I put a metal roof on my house 10 years ago. So far so good. Y’all have a good-un.
👍🏽
Great looking system. Metal roofs go on fast and are a good profit generator. I think you have made a great investment for your company.
👍🏽
Neat process! Thanks for sharing.
👍🏽
Great stuff Thanks for sharing Brian 👍
👍🏽
I have rolled metal roof on our side deck, great product! Highly recommend it!
👍🏽
That’s really cool. You can custom make your panels to size. Saving time cutting at the job site and wasted material. Great video.
👍🏽
That is cool. I have a friend that has a MUCH SMALLER set up in an enclosed trailer that makes gutters. The metal comes in flat rolls like that and it comes out in the form of a gutter or downspout. It's cool that he can make every run as long as he wants them so there are fewer connections.
👍🏽
Great video y'all have a great day and stay safe 👍
👍🏽
You go good luck best wishes. If only everyone had a clue how glamorous and easy roofing really isn't! Fly like a eagle!
👍🏽
Hi Brian it is great to see you again. Happy 4th of July to everyone. I pray you all enjoy and have a bless day.
Thanks! You too
@@HollisFarmsMS you are very welcome
Good stuff Brian, serious set up that, fair play:):)
👍🏽
That is cool as can be! I want a metal roof on my house now!
👍🏽
Great video.
Great video guys
👍🏽
that's some clean roofing tar and gravel shoes get messed up shingling a roof takes years before that cement stops jumping at you getting all over and it wears your hammer head to a forty five degree angle wood took time to get the hang of flipping that 6 penny nail mud down tile never played it but mop dry in down for them but i do think standing seam wood be the best for sun will back out screws seamless gutters had to be the sweetest job down in florida most homes where one story that's it my rants done
Awesome Brian going to save time and money for the company metal roofing is booming here in Tennessee
👍🏽
Slick to see working!
👍🏽
Nice set up.
👍🏽
Interesting video, thanks.
👍🏽
Nice set up
👍🏽
Many years ago I worked for major shingle mfg we would run the laminant shingle line at 600 ft per minute.
BH, that is awesome
👍🏽
Awesome!! Takes money to make money!!👊🏻💪🏻
Yep, 👍🏽
Glad to see y’all back in God’s country Brian!
👍🏽
That was cool!!
👍🏽
Cool! Nice investment!
👍🏽
Interesting video 🇺🇸
👍🏽
Had a black 26 ga roof put on my house about 5 years ago. Crazy how flimsy the stuff is before it is formed. Probably wouldn't do black again due to the pollen in our area, i have 60 pine trees in my yard but thats what the wife wanted and it was the best color for us.
👍🏽
Wow very efficient. Hope this pays off for you
👍🏽
Have a safe 4th Hollis family
Thanks! You too
Looks like a high dollar set up, good luck
👍🏽
Very cool
👍🏽
Used to be a maintenance manager at BlueScope, keep your dies sharp.
👍🏽
Good stuff
👍🏽
Sweet!!
Roofed my dads house about 20 years ago in it best decision we made still as good as the day we put it on except where a limb fell off the pecan tree and hit it big limb dented it but didn't punch thru never leaked wouldn't use anything else if i could help it.
👍🏽
you know, if you can get the metal in camo, you could make siding and roofing for a big number of hunters to use on their tree stands and box blinds.
Good idea
That is sliiiick game changer
👍🏽
Glad To have A supplier ,In Our area , Hope to Do Business with Your Co. In the future . What Gages ??? Can You supply , Thanks For your great post on every thing From hunting & business etc
Mostly 29 ga, can get 26 ga for a large order
That is an AWESOME addition to your company!!!! The savings in less waste, will pay for it no doubt! Have a good 4th of July buddy, and God Bless all!!!!👍😊🙏🙏🙏🙏🙏🙏
Thanks! Take care
How to get this michine
Run vertically makes four fine fencing.
👍🏽
I am considering a painted metal roof for my house. Does the paint crack when you form it? And how long does the paint last in full sun?
No, it doesn’t crack. Up to 40 year warranty available
Great product
👍🏽
Have to be sure it's good quality paint.. Cheapers not always better.. He looks to have Valspar weather XL possibly..Which is good paint for sure..
Our coils are coated with Sherwin Williams WeatherXL
Does a setup like this limit how long you can make sheets?
Really limited by how long the customer can haul and handle on site
@@HollisFarmsMS fair enough I work for a roof and rack deck company and we mostly run 30' long sheets I noticed the length of the bed before the tooling and was curious if you could run partially into the tooling before cutting the sheet or if you had to cut it before it got into the tooling. Thanks for the response, nice machine!
I have worked in sheet metal for 23 years but not really in the roofing type in air condition and heating ductwork i have done some metal roofs but not much
👍🏽
Do you do R panel on another machine???
No, just one profile
Pretty cool right there, do you sale to public. How wide and longest lenght
Yes, panels are 39” wide and can run as long as you need them
I believe he meant to say 36" not 39".. The coil is probably 40.875 on the coil, and after it's formed its 36" of coverage per panel..
Correct, 39” wide with 36” coverage
The regular roof metal when you be back in if you futility it will split
?
Read this 3 times and I don't understand what is being said.
When I think of a metal roof I think of a standing seam. no Fasteners exposed that to me is about a metal roof . My great grandfather house was done 80 yrs ago and still standing, it was a standing seam roof . There is no screws with rubber washers that go bad
Yes, that is also a great system. The industry has improved fastener and washer design so it is a more affordable option to standing seam
How much is a machine like that?
You can contact MRS for pricing. It will vary with different profiles and accessories
mrsrollform.com/?
Nice .how was hunting over seas
Had a great trip. Lots of videos coming soon
@@HollisFarmsMS thanks
have you thought of portable rollforming units? i work for a company that sells and services portable units here in houston. would add another layer to your business being able to do it on site
Those are typically for standing seam panels. We only sell panels, no installation
@@HollisFarmsMS i understand
As someone who works around machines like that you should get your people cut resistant sleeves and gloves.
👍🏽
Do you buy or lease that roll former?????
We own it
👍
👍🏽
Buy those boys some gloves 👍
Ok
What is the shortest panel can you roll ? I'm only asking because the company I work for uses a lot of metal deck and we have a saw to cut it . The saw can be a bit finicky but it does the job once you get used to it . We cut deck and grating with it . When we don't get the material cut to size . I have been to Canam in NJ many times where they roll the deck . Anyway I will leave a link for the saw . We have had this for maybe 10 years now . Good Luck with the new venture .www.patmooneysaws.com/grating-panel-bandsaw-machines/
3’
@@HollisFarmsMS well if need shorter lengths this is better that a hand held demo saw . :)
Thanks
Seems a little inefficient to have a machine to tip the toll, and one to load it. One machine could do both.
Haven’t seen one of those. Let me know who makes it
$$
Y’all spent I mean.
$$ to be made too!
👍🏽
Trim needs to be a different metal
Why’s that?