@@eyephpmyadmin6988 no it doesn’t, not at all. You must haven’t taken a single course in engineering if you think it’s as simple as making a metal tube swing into a button 💀
@@thereinthetrees_5626 it’s not about the metal tube it’s about coming up with the idea. How many people do you know that made a contraption like this. And how many do you know that would’ve just bought an e brake
@@realjoshuaW if I tasked anyone with “make a janky ass e brake that looks like it’ll slam into your Tv if you release it without letting it back up by hand” I bet everyone would be able to come up with this. This isn’t inventive, this isn’t smart, this isn’t good execution, this doesn’t have the qualities of an engineer
@@thereinthetrees_5626 he made an e brake out of a broomstick some wood and screws that’s literally the definition of engineering. It’s not nasa level engineering, it’s not no car designer engineering but it’s engineering
@@popisolation that’s not a sensor, just a light, although the bar most likely has a linkage to one of the triggers or an analog stick on the controller.
For those who are saying "he didn't told us about how to make it usable with the game" Notice he has a controller beneath it so the pipe bottom hits the button and it works
@@fuckgoogle7314I would rather pay the 30-40 to get a handbrake better than this shit. The gas and time alone driving to Home Depot and other places to get this would probably cost that
You guys, the pipe is touching a button on the controller underneath the setup. That’s how it works. If you go back you can see it clearly. He just has that button programmed as the e-brake.
You are pretty genious when it comes to these extreme budget building tips. Even have it inputing to the trigger on a co troller so your can have a variable imput. Great work man. 👍
That's pretty crafty all things considered. People can say what they want but this is undeniably creative and a pretty good work around depending on your situation.
I can't wait till you advance to the point of rebuilding your entire rig to upgrade it. Every little upgrade is good, but once you get it to that point of being best, then you refine it to smooth it out.
@@ChaosByWheels he has an extra ps5 controller behind the pipe, everyone making a handbrake out of metal pipes and wood should have one of those lying around right?
For those who are wondering, it is NOT wireless. If you look very closely there is a button infront of the bottom part, which when he pulls it presses the button. Hope this helped.
I don’t have a hydro ebrake on my drift car let alone my sim rig. You don’t need it. I mostly just use the throttle, either adding more power or letting off briefly and adding power. If I really need to turn then a clutch kick works wonders. I’m real life it stops the tyres from getting any flat-spots aswell
@@braelighty6212 Bro you dont have a drill, saw, box of rubberbands, box of woodscrews, spare lumbar, metal pipe with grip, and a PS4 Controller?!!? ***
@@sahmuss1164 y'all hating on my boy for making a whole home made sim racing setup with f*king 2 by 4s and trying to teach ppl how as well, that takes a certain amount of skill and patience that most people don't have.
Love the work, but if I may just drop one quick tip, I would 100% suggest at least MacGyver something to make the break more comfortable for your hand other than that love the work keep working hard
FUN FACT: If you can't do this then just change your game controls so that your clutch pedal is the Handbrake and Auto-clutch is enabled, letting you still manually shift.
Carpentry skills, plus mechanical engineering, plus being a general technology dweeb is so much fun waiting to be had 😂 Wish I had more money and free time
Alr fro people who don't get how that magically connected to the game, the is a ps4 behind the stick, so when he pulls the brake it hits r2/r1 whatever he has configured
I'm pretty sure an E-brake is only supposed to actuate the rear brakes, unless you mapped the right trigger to handbrake in-game, it has the same function as the brakes
For everyone wondering how you get it to work in game, he has his controller attatched to the frame behind the e-brake and the pipe pushes on right bumper to activate it which he probably remapped his controller to do that
keep it up bro doing great work,bunch of haters, but this is a great alternative for buying a $60+ e-brake. yeah it’s not gonna be pressure controlled but this is way closer to real sim than pressing a button on a controller with your fingers. great job
Install a little block of wood on the bottom left of the ebrake as a little stopper so ebrake will snap back and stop instead of wobbling back and forth
Put a scre above the controller but below the fulcrum of the bar. Set it the same length as a full button press. Now you can snatch the handle and it will only press to the limit and no further
For anyone confused, his "e brake" is pressing the button on the controller.
Like a true fucking engineer, see I code and this is the slick shit it takes to make it very far in engineering, a fucking master at work
@@eyephpmyadmin6988 no it doesn’t, not at all. You must haven’t taken a single course in engineering if you think it’s as simple as making a metal tube swing into a button 💀
@@thereinthetrees_5626 it’s not about the metal tube it’s about coming up with the idea. How many people do you know that made a contraption like this. And how many do you know that would’ve just bought an e brake
@@realjoshuaW if I tasked anyone with “make a janky ass e brake that looks like it’ll slam into your Tv if you release it without letting it back up by hand” I bet everyone would be able to come up with this.
This isn’t inventive, this isn’t smart, this isn’t good execution, this doesn’t have the qualities of an engineer
@@thereinthetrees_5626 he made an e brake out of a broomstick some wood and screws that’s literally the definition of engineering. It’s not nasa level engineering, it’s not no car designer engineering but it’s engineering
The title should be “how to make a wireless e-brake”
Watch again bro, the bottom of the pipe is hitting a button 👍
There’s a ps4 controller the bar hits either r1 or 2 I’m not sure which one tho
@@Hughjanus720 do you see any wires?? No so it is wireless
I mean connected to the actual e-brake
@@Hughjanus720 nice of him to include that part of the tutorial
Yeah
SMACK! Right into the tv
Exactly.
Exactly
Exactly
Underrated comment
Exactly.
Electronics left the chat
It hits a button on the controller when you pull it
You didn't see the bright blue sensor on the controller?
@@popisolation that’s not a sensor, just a light, although the bar most likely has a linkage to one of the triggers or an analog stick on the controller.
@@ryonbrand7885 it literally shows that it presses the trigger
@@ItzSoaRqt Exactly as I expected, as opposed to the guy who thought the light was a sensor.
For those who are saying "he didn't told us about how to make it usable with the game"
Notice he has a controller beneath it so the pipe bottom hits the button and it works
Mom's broom handle had never been seen again
yeah guys just have a random metal pipe with a bunch of red tape on it shaped perfectly for an E-Brake
haahahahaha yeah lemme go grab mine rq
It’s a jack handle…..
You can find anything like that. A broken broom works perfectly just fine
@@bufferingmp.018 mfs not resourceful these days.
@@fuckgoogle7314I would rather pay the 30-40 to get a handbrake better than this shit. The gas and time alone driving to Home Depot and other places to get this would probably cost that
If I find a metal pipe I ain't drilling a hole through it, I'm dropping it 😂
IVE FINALLY FOUND ONE OF MY PEOPLE
Let's perform the ritual together
*Metal pipe dropping*
@@EmLovesCamaros *Metal pipe dropping*
Real
insert hearing damage 💀💀💀
I listen to the sound 26 hours a day
You guys, the pipe is touching a button on the controller underneath the setup. That’s how it works. If you go back you can see it clearly. He just has that button programmed as the e-brake.
instructions unclear: my house is flooding
bro im famous
how
@agusus he used a water pipe
Bro take the wrong pipes
bro got the fake depressed 15-year old starter pack💀
@Ligma Baller the "dope" censor bar on mickey mouse gotta be the corniest shit I've ever seen☠️☠️☠️☠️☠️☠️
This is the type of guy companies are worried about😂 dude buys the shifter and converts it into a sequential by using rubber bands
Don't take others conment
I did that with the g twenty nine shifter and I still don't have the handbrake I just assigned it to right paddle shifter
@@vino3791?
@@vino3791are you ok, like can read or no?
You are pretty genious when it comes to these extreme budget building tips. Even have it inputing to the trigger on a co troller so your can have a variable imput. Great work man. 👍
U need a stopper behind it so it don’t hit TV-also if u use bungee cables/exercise bands they last longer than rubber band
Put in a screw behind the bar. Stops it nice and tight
I wanna shit on this for being stupid, but this is actually nicely done and a foolproof design unlike most.
My pp in the morning be like:
Edit: Wth my pp got 1K likes💀
Woahhh 😂
😂😂😂
Guess we’re girls
Ong it be like tht for no reason u just wake up hard
literally me
That's pretty crafty all things considered. People can say what they want but this is undeniably creative and a pretty good work around depending on your situation.
The first wireless sim racing handbrake. Truly inspiring 👏👏👏
it is pressing a button
Yea look the controllers is conected under the table
Bro it press r2
i see a wire running right through the controller so explain that
@@cursedminion828 I was being sarcastic
I can't wait till you advance to the point of rebuilding your entire rig to upgrade it. Every little upgrade is good, but once you get it to that point of being best, then you refine it to smooth it out.
Do you think we just have metal pipes laying around in our houses 💀
You can probably get one from a broken broom
Who doesn’t
That's the easy part. But how tf do i connect a metal pipe to the pc 💀
Around my house or farm I can find practically anything just say the word
@@ChaosByWheels he has an extra ps5 controller behind the pipe, everyone making a handbrake out of metal pipes and wood should have one of those lying around right?
That is a sick setup man and it’s budget
Did it. Put a screw in front of the handle to prevent it going too far. Very sweet for dirt
“Find a pipe in your home”
Shit I gotta get a home first
For those who are wondering, it is NOT wireless. If you look very closely there is a button infront of the bottom part, which when he pulls it presses the button.
Hope this helped.
Things gonna spring back and break your tv
No it wont lol
@@rez372 how will it not
@@kosuuqwkhe probably tested it without the tv and marked where it stops
Your 2x4 rig is nicely made!
instructions unclear: I am arrested for wood theft
I don’t have a hydro ebrake on my drift car let alone my sim rig. You don’t need it. I mostly just use the throttle, either adding more power or letting off briefly and adding power. If I really need to turn then a clutch kick works wonders.
I’m real life it stops the tyres from getting any flat-spots aswell
That’s actually sick af
I don't know what y'all are talking about this is engineered pretty well and he probably has the controller binded to the actual eBrake button.
Ahh yes I’ll just grab my random metal pipe I kept around for no reason whatsoever
I have a ton do you not
You don't got metal pipe laying around. Smh noob. A few come with homes.
If yoy dont have scrap metal and wood like that laying around what are you doing
I have a bunch laying around my house
Found a purple pipe im my mums room, now have a handbrake wit vibrating feedback as well, sick 😅
Instructions unclear, my plumbing is now messed up
i would put rubber bands only on 1 side, so it forces the bar to return to start position. and maybe reduce the angle of movement, but yea great job !
Get a job. Oh wait… I need to get a job. Good vid
😂😂😂
Thank you! 🙏🏻
I’d recommend putting some limiting screws on the bottom of the pipe so it moves together with the controller button instead of flopping around.
bro made his whole house
I cut some of my ski pole off, zip tied it to my lever then rubber banned to 3rd gear and select paddle shift and programmed 4th to E-brake.
next thing you know, this guy builds a real car
It's way easier making mounting holes for a 50$ amazon e brake, especially if you already have a custom wood rig let alone a decently strong desk
Ha! that just reminds me of Ken Block. RIP Ken Block, I'll never forget you!
Yep we all have the exact same sized wood and tools lying around🤗👍
just t
go to ur garage or borrow from a neighbor
Keep being a crab
@@some-replies bro its youtube dont take dis personal
Step 1: Buy a power drill and some lumbar
Some Limbaugh
Bro you don’t own a drill?!!?
@@braelighty6212 Bro you dont have a drill, saw, box of rubberbands, box of woodscrews, spare lumbar, metal pipe with grip, and a PS4 Controller?!!? ***
@@sahmuss1164 y'all hating on my boy for making a whole home made sim racing setup with f*king 2 by 4s and trying to teach ppl how as well, that takes a certain amount of skill and patience that most people don't have.
@@sahmuss1164 Bro... its a drill its an essential thing for any house owner?
Imma try this🤣
It’s a great cheap option!
It's wonderful if you're on console! Just make sure the game supports input from 2 devices at once. Forza cuts wheel input when you pull the brake
Love the work, but if I may just drop one quick tip, I would 100% suggest at least MacGyver something to make the break more comfortable for your hand other than that love the work keep working hard
Soooo it's not connected to anything? Or it is
When it’s pulled it pressed on R2 on the controller
@@Matty27 no it doesn’t
It presses a button. Explained
@@tokahontas9990 well it does though doesnt it. Is it wireless then? Just a piece of wood connected to a computer
Look at the controler behind it . Thats how it work@@Matty27
I love the fact that It got faster when he pulled it
It's because the wheels broke loose
Easier idea: Tape a toothbrush or whatever to a controller stick and use that.
Bro is a pro in drilling holes 💀💀
That Metal pipe is from youre parents bedroom
😂😂 Thank you for the super thanks Kiway!! 🙏🏻🙏🏻
FUN FACT: If you can't do this then just change your game controls so that your clutch pedal is the Handbrake and Auto-clutch is enabled, letting you still manually shift.
Found the pipe but now my toliet dont work😢
Hahaha I used my pipe from an old electric drum set haha
Carpentry skills, plus mechanical engineering, plus being a general technology dweeb is so much fun waiting to be had 😂 Wish I had more money and free time
The Ibric don’t do nothing in the game it’s not wired up
I just remapped RT to the ebrake and the pipe hits RT
@@SimRacingSucksshould've included that in the video tbh
@@noonxrsdo you not have eyes??
@@noonxrsI literally watched this one short and then recreated it in 2 hours.
@@some-replies bro i wrote that 6 months ago, and its better to include what he did in the video anyways, as people might miss out on it
Bro is real racer❤
At this point you could've used that effort to work and make the money for an affordable decent handbrake
Adapt > adapt > adapt > adapt > improvise > overcome
It wouldn’t take too long to do this but i agree that it would be better to just buy one
It’s not hard to drill screws into wood and put elastic bands around it
Ik
Using your brain vs spending money. Using your brain always wins
With the power of the force the e-brake works 😊
Alr fro people who don't get how that magically connected to the game, the is a ps4 behind the stick, so when he pulls the brake it hits r2/r1 whatever he has configured
This guy has ultimate dad powers already
Thats great Bro!
One of my dream game but until now I can't get so sad but I like to watch it😊
This dude really into his game
If you angle it differently you can add an sequential shifter next to it
I'm pretty sure an E-brake is only supposed to actuate the rear brakes, unless you mapped the right trigger to handbrake in-game, it has the same function as the brakes
The most perfect piece of scrap i've seen
You could actually make this setup look really nice with some sanding and polishing
For everyone wondering how you get it to work in game, he has his controller attatched to the frame behind the e-brake and the pipe pushes on right bumper to activate it which he probably remapped his controller to do that
It's a shame you have to explain that
He now needs a new monitor, but it does like sick!!!
Thank you! I agrée haha
keep it up bro doing great work,bunch of haters, but this is a great alternative for buying a $60+ e-brake. yeah it’s not gonna be pressure controlled but this is way closer to real sim than pressing a button on a controller with your fingers. great job
Blud really driving the Flintstones car 💀💀💀💀💀
that's actually badass
Not going to lie the rod hitting the controller is kind of genius
I like the wiring part the most
brake hits the controller bumper.
Guys, these breaks work just as good for real cars of you don’t have a setup like this. Functions just as well if not better.
With the price of lumber nowadays you could just buy sim pedals/wheel and shifter set for cheaper and only have to build the seat
The drill sound sounded like "i miss the rage"
I like how it just works 😂 no need to plug in. Just set it up through your game settings 😂
Exactly! Not really much option for ps4 handbrakes anyway lol
Scusa ma a me non funziona con dirt rally 2
For the electronics get a controller holder and every time you hold the e brake back it hit the trigger and slows down
Replace bands with springs and you will have much cleaner and more stable e brake.
Make the front rubber bands upside down and it’ll have more tension to the back
for those that are missing it, the pipes hitting the R1 button on the dualshock
🙏🏻🙏🏻
Install a little block of wood on the bottom left of the ebrake as a little stopper so ebrake will snap back and stop instead of wobbling back and forth
good idea
I also grabbed some unimportant beams around my house to build the frame and everything seems fine
It must be said that although this is cool, it doesn’t actually function as an actual sim e brake would, but good effort and creative vid! 😂
I'm saving ur videos I wanna build a setup like this
That is 300 IQ
Looks good , works good
But need to have a expensive sim racing setup anyways 😂
Pvc pipe on a wooden post that when I pull it hits the space bar>>>>
Now if I could find some of those "Dubai 4s" so I could build one.
If you combine this with a raspberry pi, some coding and a little bit of creativity, you can create a whole simulator spending less than 100$
The cost of the rasperry pi can still punch a hole in your bank account depending apon where you live
Your Voice is like My GrandFather
maybe can use 'limit switch' for the trigger
Put a scre above the controller but below the fulcrum of the bar. Set it the same length as a full button press. Now you can snatch the handle and it will only press to the limit and no further
Instructions unclear, my house exploded. Thanks a lot 😐
Can you also show the way to connect wires please love from Pakistan ❤😊
Pull your E-Break going 70mph, It won’t make your engine or transmission throw itself out of the car.
It sure won't.
If the metal pole swings a little to hard the TV mite KABOOM but good job
This is worth making. Not only can it work as an E-Brake, it can also serve other purposes. 😏
Thanks so much, ima try this
if u have a flight simulator joystick u can use x axis as an e-brake
The sound in the back
Like “ aahhh”😂😂😂