Mazda RX8 Renesis Rotor Tips and Tricks for performance builds - KMR Rotor Tech Talk #2 RX-8 SE3P
Вставка
- Опубліковано 1 лип 2024
- www.kylemohanracing.com
Had a RX8 Touring car assembly come into the shop. Lightened the Rotors, Side clearanced them and race balanced. - Авто та транспорт
Would be great to see you do a hybrid build! Thanks for the videos. 👍
ua-cam.com/video/9wFQCSeOodA/v-deo.html I will do a follow up on this video soon.
@@KyleMohanRacing kyle how can I message you for help on a build?
@@haaseuros9789 www.kylemohanracing.com
Also, could you do a video over the WPC treatment stuff!? I saw in mentioned in MotoIQ a while back, but it's been a while since I heard any rotary talk about it. Exciting idea though.
Can you show how lighting rotors effects peak torque. Does it increase torque or just increase the RPM where peak torque occurs? Thanks
Another well timed tech talk! On the rotor cuts for lightening was balancing apart of that? looks so uniform
And also mr kmr if you was building a rx8 turbo would you lighten the rotating assembly? Ofcourse im going to balance and also rx7 apex seals as that gets mentioned alot
I would like to make this change to my rotors, could you indicate what is the maximum depth achievable to make the lightening?
How do you prep a renesis for boost and how much boost can it handle reliably?
Quick question, just seen a cross section of a rotor (rotor cut in half) and saw cavities inside the rotor, what is their purpose? Or is it merely weight saving?
should you really be removing material on the side of the rotor in a renesis? you don’t think the side exhaust port will cause issues?
What's the impact on the powerband and engine behaviour through this? Any downsides to consider?
In regards to what
Where and how is it balanced?
Have you ever built a 3 rotor renesis? I have seen a lot of talk on the internet on how it won’t work and Iv seen a few people claim to have done it but cannot find much information on them
Happy to help. Just hit me up on the web site if you want to build one.
Why not Deepen the apex seal grooves on all rennesis regardless of hybrid motor aka rx7 exhaust ports.
Ehhh, rx8 seals are fine for normal and most performance applications. Seems like a waste of $ unless its an extreme build and every other modification is being done or there is a good reason. Like the rx8 seal fails over RX7 ports...
@@KyleMohanRacing Why do the RX8 seals fail over the RX& exhaust ports?
need balancing after lightened ?
Yep. Absolutely 💯
What did you mean by a “hybrid motor” ?
semi peripheral ports
@@NicoKyunKyun what housings can be used to do this hybrid on the Rx8 front, center, and end irons?
@@NicoKyunKyun no semi p is not hybrid.
@@justink4636 ua-cam.com/video/9wFQCSeOodA/v-deo.html
@@NicoKyunKyun ua-cam.com/video/9wFQCSeOodA/v-deo.html