Thank you for showing your struggles. I have the same rear suspension kit for my 87 Cutlass and figured there’d be issues. So glad you showed that. Thanks again
Thx for the vid I am in the middle of rebuilding a 85 el camino and doing a frame up redo this will co.e in handy thx.is that sway bar the same or better than the anti roll bar that I have seen o. Others vid.
I don’t know what the part numbers are but if you go to UMI’s website they have everything organized very nice by platform. Go to G Body section and it will show you everything you might want for all G bodies.
What part number are the Bilsteins shocks for the front and rears that you’re using? I’m planning on installing 2” lowering springs on the front and rear and 2” drop spindles of my 78 cutlass. Thanks!
Im building an absolute mint ( minus paint) 85 regal. Got it cheap. Remember when people talked about building super cheap gbodys because everything was so cheap and easy to get. What happened!!!! I've got 30 grand in mine probably and I'm 75% done with it.
Below are the details for wheels. Tires are 245/40 17’s USM-U11117806145 US Mag Wheel, Rambler U111, 17 in. x 8 in., Aluminum, Matte Gray, 5 x 4.75 in. Bolt Circle, 4.50 in. Backspace
Below are the details for the wheels. Including part number. I bought them from Summit. Tires are 245/40 17’s. USM-U11117806145 US Mag Wheel, Rambler U111, 17 in. x 8 in., Aluminum, Matte Gray, 5 x 4.75 in. Bolt Circle, 4.50 in. Backspace
Thank you for showing your struggles. I have the same rear suspension kit for my 87 Cutlass and figured there’d be issues. So glad you showed that. Thanks again
You are welcome! Just like to keep it real with people.
I have a cutlass you need some 342 gears in the rear end
Nice cutlass... I had one just like it... Cant wait to get my 87 SS Montecarlo on the road
I had a California Regal and a rusty Cutlass wish I kept them tile was before the LS swap days
Subscribed thanks for videos keep them coming
Following. Doing rear soon and found umi rear/front sway bars. Plan to get rear bars as well.
Sweet nice video can’t wait to get mine on the road 👍🏽
Well replacing body mounts will be good start instead swapping motor
Thx for the vid I am in the middle of rebuilding a 85 el camino and doing a frame up redo this will co.e in handy thx.is that sway bar the same or better than the anti roll bar that I have seen o. Others vid.
Nice video, great narration. With this setup, do you feel a need for traction bars or is it hooking up ok? Thanks
Salute to the g body nice work ..what’s the part numbers you used for suspension
I don’t know what the part numbers are but if you go to UMI’s website they have everything organized very nice by platform. Go to G Body section and it will show you everything you might want for all G bodies.
Need to rotate those wheels after every burnout lol
You need a posi bro asap beautiful built i got a 85 cutlass got a 6.0 ls for it im ready to swap !!
I wish you was close by i would have sold you a rear end it just needs a pinion gear
What part number are the Bilsteins shocks for the front and rears that you’re using? I’m planning on installing 2” lowering springs on the front and rear and 2” drop spindles of my 78 cutlass. Thanks!
great video, spraying lubby doobie is far out man, pass from the left-hand side too. Lol
Sweet!!
Thanks for the info
Im building an absolute mint ( minus paint) 85 regal. Got it cheap. Remember when people talked about building super cheap gbodys because everything was so cheap and easy to get. What happened!!!! I've got 30 grand in mine probably and I'm 75% done with it.
Like your olds, i just put the same setup in my 1986 Buick T Type
What size wheels and tires
Below are the details for wheels. Tires are 245/40 17’s
USM-U11117806145
US Mag Wheel, Rambler U111, 17 in. x 8 in., Aluminum, Matte Gray, 5 x 4.75 in. Bolt Circle, 4.50 in. Backspace
Nice set up👌 did you run 17x8 with 4.5” BS on all 4 corners or is the front a different set up
@@turbobuicknation same size on all 4 corners.
Roger that thanks 👌been all towing around a few set ups to run and sizes etc
What's the width of the rear tires
255 40 17’s
I have a 87’ Dodge Ram D150 318 small block mopar that my dad bought new and it still looks amazing and very low moles and I’ll trade you
Use a torch Melt arm bolts.
Pretty sweet pile bro...
The wheels size and offset? And tire size?
Below are the details for the wheels. Including part number. I bought them from Summit. Tires are 245/40 17’s.
USM-U11117806145
US Mag Wheel, Rambler U111, 17 in. x 8 in., Aluminum, Matte Gray, 5 x 4.75 in. Bolt Circle, 4.50 in. Backspace
Nice Cutlass! Keep up the good work!
1 wheel peel. Need LSD