More John Deere Videos: JOHN DEERE FUEL LIFT PUMP REPLACEMENT | JOHN DEERE POWERTECH 6.8L 4.5L ua-cam.com/video/Usurbkt1N74/v-deo.html TREE STUMP VS EXCAVATOR or HOW TO REMOVE STUBBORN STUMP | John Deere 2054d ua-cam.com/video/dgcN5v7VY0A/v-deo.html TRACTOR IGNITION KEY SWITCH WIRING | Universal Ignition Switch | JOHN DEERE 2130 ua-cam.com/video/_D4t4hwWj0A/v-deo.html
I just wanted to say thank you! I've got a 1972 410B and diagnosed the issue, but really needed your thourough video to help show me how to pull those injectors. Back to digging now.
Thanks for sharing this . I had one stuck in my 310 backhoe took me 2 weeks to get it out . I’d work on it a little then work on other things but I got it out using a homemade puller .
I have a John Deere 1120 tractor and it was virtually identical to replace the injectors (3 cyl 2.7 L) the High Pressure line was held on with the 3/4 female but also needed a 9/16 to hold male on injector end. The replacement injector did not have male on injector. The low pressure fuel return lines were just push on rubber fuel lines, and I needed a 5/8 wrench to tighten a male flare fitting.
Thank you for your video! I just replaced mine and now there is a rapping sound and vibration coming from one cylinder. Sounds and feels like a hammer tapping the injector from the bottom... Any ideas what is causing that?
Glad it helped Jim. Check if injector fires or not first. Also look for any injector damage or carbon/oil deposits. It could be dead valve lifter or valve lash out of specs.
Great video! I do have a question on a jd200clc and it started leaking from the cap and even two of them became loose. From your experience what can be the cause? Threads are ok
Hey Carlos! Those injector caps known to leak. I have seen people overnight cap then they start leaking. Check for any cracks or worn out o-rings. I would replace leaky once anyway. Thanks for your feedback.
Do you consult or help out FaceTime I have a John Deere 243 cylinder diesel which is not starting that I bought and there’s a little bit of blow wind coming from the top when I took the valve cover off but I don’t get any kind of attempt to start when I try. Anyway we can FaceTime on the phone and go over what I got I can pay for your time
More John Deere Videos: JOHN DEERE FUEL LIFT PUMP REPLACEMENT | JOHN DEERE POWERTECH 6.8L 4.5L ua-cam.com/video/Usurbkt1N74/v-deo.html
TREE STUMP VS EXCAVATOR or HOW TO REMOVE STUBBORN STUMP | John Deere 2054d
ua-cam.com/video/dgcN5v7VY0A/v-deo.html
TRACTOR IGNITION KEY SWITCH WIRING | Universal Ignition Switch | JOHN DEERE 2130
ua-cam.com/video/_D4t4hwWj0A/v-deo.html
Thanks for watching!
My buddy has a bad injector in a 1995 JD 240 skid steer. Same pencil injectors. This video makes all the difference to change them. Thankyou.
That's so cool! I am glad this video helped you out. JD 240 has four cylinder engine, right?
@@PistonShack No. 3 cylinder, 2.9 litre engine, no turbo.
I just wanted to say thank you! I've got a 1972 410B and diagnosed the issue, but really needed your thourough video to help show me how to pull those injectors. Back to digging now.
Big props for being so consistent with the videos coming out 👍
Yeah, I do what I can)
Thanks for sharing this . I had one stuck in my 310 backhoe took me 2 weeks to get it out . I’d work on it a little then work on other things but I got it out using a homemade puller .
Glad it helped, buddy! How's your repair? Any luck to get injectors out?
@@PistonShack yes I have new ones in now but one of the steel lines was leaking. I had to order a new one so I’m waiting on it .
Great production and very informative uploads!
Much appreciated!
I have a John Deere 1120 tractor and it was virtually identical to replace the injectors (3 cyl 2.7 L) the High Pressure line was held on with the 3/4 female but also needed a 9/16 to hold male on injector end. The replacement injector did not have male on injector. The low pressure fuel return lines were just push on rubber fuel lines, and I needed a 5/8 wrench to tighten a male flare fitting.
Hey Gerald. Thanks for sharing your repair experience!
Thanks for the video.
You are welcome Bruce! Thanks for watching)
Thanks, in the process of replacing an injector on my JD 2755 farm tractor, very timely.
Glad I could help! Let me know if you have any questions. Cheers Sine!
Thanks for your video! Very interesting tutorial!
Glad you liked it!
Very helpful. Thanks.
Glad it was helpful, Austin!
Thank you for your video! I just replaced mine and now there is a rapping sound and vibration coming from one cylinder. Sounds and feels like a hammer tapping the injector from the bottom... Any ideas what is causing that?
Glad it helped Jim. Check if injector fires or not first. Also look for any injector damage or carbon/oil deposits.
It could be dead valve lifter or valve lash out of specs.
Thank you for your help and expertise! Great video
Glad it was helpful Tony! What kind John Deere machine do you have?
good day sir, what is the possible reason why no deseal appears in the injectors? Thank you
I am from the Philippines sir.
Great video!
I do have a question on a jd200clc and it started leaking from the cap and even two of them became loose. From your experience what can be the cause? Threads are ok
Hey Carlos! Those injector caps known to leak. I have seen people overnight cap then they start leaking. Check for any cracks or worn out o-rings. I would replace leaky once anyway. Thanks for your feedback.
Thank you ,very good,,Very good video
Glad you liked it Thomas! What kind JD machine do you have?
I have a leak coming out right under the return lines on top of injector 3 and 4, but my tractor still runs good. What do I need to replace?
torque specs on hold down clamp bolts?
mini slide hammers are great for stuck small things
Good point! I should get one for myself! Can you recommend any specific model or brand.
@@PistonShack i use harbor freight, (the 2 pound pittsburg model)
Thank You.
You're welcome! Thanks for your feedback.
I it necessary to adjust these after they are installed
There's no adjustment.
Any one knows what is the psi setting on this injectors? I am trying to calibrate mine after I cleaned and unclogged them.
A framing hammer 🔨 works in seconds
That's so cool! I will try it out next time!
I thinkthe dealers use a special slide hammer to get them out.
Yeh, there's special tool.
Where are the glow plugs??
Use a slide hammer
My
Do you consult or help out FaceTime I have a John Deere 243 cylinder diesel which is not starting that I bought and there’s a little bit of blow wind coming from the top when I took the valve cover off but I don’t get any kind of attempt to start when I try. Anyway we can FaceTime on the phone and go over what I got I can pay for your time