Yea no way MSI is at the top lol strix stays king also evga is way better than MSI too. I would put MSI above zotac which is basically recycled garb. Sorry man MSI isn’t known for making top tier stuff
Glad to see you used the Royal I’m revamping my old pc and always loved the Royal but it was sooo expensive back in the day and wasn’t sure if it would still hold for todays standards. Happy to see you’re using them
Be careful with this RAM. I got the 16 x 2 sticks of the same model, which he used in any other video. I having night mares with the PC. It stutters like hell. All my temps and power limits are normal. Still it is like shit.
@@mrdoom8365 I ended up going with ddr5 even tho it’s in the early stages and I’ll probably regret it later 😅 Corsair dominator 32gb 6400mhz c38 extremely fast but slow cycle rate compared to ddr4 so well see
Anyone else catch when they showed the gpu and cpu temp 7minutes in that it was a different aio entirely?? It was the kraken z73 lol then switched back to the ryogen
great. i bought the asus rog strix z690 gaming F for ddr5, and today i take a 12900kf and i have a 3070ti. i would like to move for a 3080ti but its too expensive !
I got the same gpu and psu but my pc doesn’t look nearly as good gotta put some more money into before it actually starts looking like a proper gaming pc (cpu is only a R7 5800X)
when doing push/pull do you have the same fans at the same RPM? or is one faster than the other too compensate pressures and if so which one is faster?
Would be grateful if you would explain how to connect the replacement fans to the Ryujin II lc... I can't find anywhere the correct way to get the two to talk.
Amazing build. I am currently building something very similar & could do with a little help as this is my first build. I have the Galahad AIO & Controller with xx9 fans. Same fans as in this build & case. I have connected all x9 fans to the controller. I have connected the AIO pump straight to the Motherboards AIO pump header but where do I connect the CPU one off the AIO? The instructions say a single connection into the controller which is where I have connected it but I see many video's Saying it goes straight onto the motherboards CPU main header? I also want the RGB on the case to match the fans as well So From the controller the RGB as gone straight to the motherboard RGB as per instructions. The other output from the controller, to the RGB on the motherboard and the last one would be the Main power SATA to the PSU with the RGB from the front of the case to another RGB header 5v 3 pin on the motherboard. Is this correct? My PSU arrives today (the last piece) & Im scared to turn it on :( Any help would be much appreciated. PCG
You probably have it running by now, but the main CPU plug for the fan/AIO pump is usually in the middle, next to the CPU. I used the AIO and disabled the fan in bios. If the aRGB are all compatible and are 5v they all plug into the one 5v 3 pin RGB header on MB.
Hi, did you know that Venom that stiker or screen ? And RAM Trizedent Royal is DDR4 or 5 .. at Indonesia im searching dont have DDR 5. let me know . Tq and i see at 7.08 ( using NZXT and Next is Ryuzin II)..
Hey Builder PC, I am a huge fan and am interested on what tools you have at your disposal. If you happen to read this… could you PLEASE let me know what tools you use. I started building recently and put a 12700F and AMD rx 6900 xt Nitro SE build together. I did a pretty good job, but really I struggled with the tools I had, and questions about whether what I was doing was done properly. For example, I have 300 dollars worth of tools. With really good options to work with (so I thought), I still managed to struggle. I wasn’t sure if I was tightening certain screws to hard and etc. I didn’t purposely try and tighten screws extremely tight, but still I digress. If you anyone reads this and could like it, it may help in receiving a response on what tools Builder PC uses. Thank you!
Would this build still work well if you replace the cpu and graphics card with AMD's Ryzen™ 9 5900X Processor, 3.7GHz w/ 12 Cores / 24 Threads and RX 6900 XT Threads ? Literally keeping everything else the same, case, motherboard, RAM, power and cooling etc.
does the suprim card and lian li gb-001 fit perfectly, i have read of some cases in reddit that using the bracket and cards like suprim x wont fit, as the pcie lock wont close or click when the gb-001 is installed, or does the gpu pcie lock doesnt close?
ASUS TUF GT502 PC Build x INTEL I7-13700K
ua-cam.com/video/SYVB3zlwEQU/v-deo.html
MSI SUPRIM X absolutely the beast GPU in the market. With the highest TDP to fire it up & also come with the highest price. Dang
eh ROG Strix remains supreme imo
Yea no way MSI is at the top lol strix stays king also evga is way better than MSI too. I would put MSI above zotac which is basically recycled garb. Sorry man MSI isn’t known for making top tier stuff
Hi, did you know what that Venom ? And RAM Trizedent Royal is DDR 4/5 ? Im still searching DDR 5 in Indonesia dunt have Ddr5.
This is the kind of build I'm going for. Currently getting a job then gonna save up for this. I'll let you know in 1-2 years how it goes
Bro?How did it go?
have to say those white RGB fans look so impressive, love that look.
Did you use both fan hubs, or did you plug the micro usb from the Ryujin ii into the Lian Li fan hub?
What brand of cables did you use on the gpu? The black ones ?? Thanks man
Glad to see you used the Royal I’m revamping my old pc and always loved the Royal but it was sooo expensive back in the day and wasn’t sure if it would still hold for todays standards. Happy to see you’re using them
Be careful with this RAM. I got the 16 x 2 sticks of the same model, which he used in any other video. I having night mares with the PC.
It stutters like hell. All my temps and power limits are normal. Still it is like shit.
@@mrdoom8365 I ended up going with ddr5 even tho it’s in the early stages and I’ll probably regret it later 😅 Corsair dominator 32gb 6400mhz c38 extremely fast but slow cycle rate compared to ddr4 so well see
Anyone else catch when they showed the gpu and cpu temp 7minutes in that it was a different aio entirely?? It was the kraken z73 lol then switched back to the ryogen
7:09
At 7:07 there's a different built in the frame, or at least it's definitely a different AIO cooler, that's a NZXT.
Yea i did notice that!
It's okay in that same exact shot. There was also a fan where the venom magnet is
I think he made 2 videos of 2 slightly different builds, which may have confused the editor.
Ya and I’m still laughing
I have that motherboard and it's a beast when running my rtx 3080ftw3 and i7 12700K.
great. i bought the asus rog strix z690 gaming F for ddr5, and today i take a 12900kf and i have a 3070ti. i would like to move for a 3080ti but its too expensive !
Jesus..look at that beauty!
Jesus Messenger of God peace and blessings be upon him
@@dailytube5858 no
@Not going to use my real name on this app no
@@dailytube5858 Jesus Son of God
Gabriel jesus is handsome, not beautiful
Where can I buy that Venom plate please ? Very nice video.
That cpu cooler is insane, I've got the h150i but this one is summit else.👌👌
ROG Ryujin 2 360 AIO
This build looks amazing! I think y'all put in B-roll for a different build at 7:08 but it's fine lol. Good job!
Did u run termal test or benchmark on this?
At 7:10 i think there is something wrong with the Aio because i don’t know how a Asus Aio can become an NZXT Aio XD
Mmm magic
I noticed that too and immediately said to myself “what the hell”
@@orrygel fr ngl
How did you get a full size power supply in pal? And how did you get the aoi to fit at the top with a full size mobo?
the case is wrong
this is a LIAN LI O11 Dynamic, it's not the mini version.
Planning to buy this mobo and I like your set up maybe I will try this.. 😎
Does your panel light up or did you request a certain area?
You Do The Builds PC ASUS Day Videos?
absolutely sick one of the best builds ever. 100% dope
Why is your white VGA LED light on solid? Beautiful build but that white light triggered my ocd lol
Where did you get that Venom plate for the PC? It looks dope
hey is this really a mini pc or mid tower lianli 011d
rog z690-A d4/tuf z690 plus d4 which better?
Love this build 💯💯💯
The card is msi brand, how do you sync it with asus brand?
I want this build someday! It's amazing! Intel makes great CPU's no doubt!
But their 10th and 11th were total shit, waiting for raptor lake CPUs and rtx 40 series GPU
@@ayushchakraborty7494 stop complaining thus intel said it was for work not for gaming
most satisfying thing i have ever watched
Hi i have a question: Can the COOLERMASTER MasterLiquid ML360 Illusion with the same motherboard fit on top?
I wish i could afford that expensive pc.
Btw you make videos best, the sound added to video was so satisfying to hear while you built it.
why did you switch from the ASUS AIO to the NZXT AIO then back to the ASUS?
where can I buy the Venom display thing...?
Look at tech source video of displays in computer cases, he has some good recommendations there
where did you buy these sleeved cables for pcie??
how long was boot time on it?
I can't stop looking at the dark spot in the middle of their white mat... It's ruining the whole thing for me lol.
How did you get the fans to work. I cant seem to get mine to work with the motherboard software to work with them
I got the same gpu and psu but my pc doesn’t look nearly as good gotta put some more money into before it actually starts looking like a proper gaming pc (cpu is only a R7 5800X)
Did u connect the 3 lian li fans of the aio into the lian li hub?
This guy building a beast and we out here got no money.
simple cooling systm and powerful i like this
Please put the link in Amazon or others, from where those can buy.
How much is that PC build ?
Do you give away any of your computers?
where did you get the psu cables from ?
Omg,I might steal some ideas here,damn that's a beauty
when doing push/pull do you have the same fans at the same RPM? or is one faster than the other too compensate pressures and if so which one is faster?
Would be grateful if you would explain how to connect the replacement fans to the Ryujin II lc... I can't find anywhere the correct way to get the two to talk.
Are you sure this is lianli 011D XL?
Where do u get the venom rear back plate?
*Very Nice Build*
hey can I ask how did you route the ryujin hub and lian li hub?
Cables brand plz?
I didn't know that memory comes iced-out now... what, no diamonds on the GPU?
What's the price?
why do you hide old videos ? pls show its again :(
I see everyone using the GSkill Ram is it that good in performance?
How to adjust the fan speed for the push/pull setup?, I have same aio cooler and fans.
Which sleeved cables are this for the rm1000x?
what is the venom case ? link ?
whre did u get that venom fan cover
Does the GPU cables rub the glass panel?
My dream gaming pc 😍😍😍🤩
Why you deleted all your other videos!???
Can it fit three 360mm fans then?
Amazing build. I am currently building something very similar & could do with a little help as this is my first build. I have the Galahad AIO & Controller with xx9 fans. Same fans as in this build & case. I have connected all x9 fans to the controller. I have connected the AIO pump straight to the Motherboards AIO pump header but where do I connect the CPU one off the AIO? The instructions say a single connection into the controller which is where I have connected it but I see many video's Saying it goes straight onto the motherboards CPU main header? I also want the RGB on the case to match the fans as well So From the controller the RGB as gone straight to the motherboard RGB as per instructions. The other output from the controller, to the RGB on the motherboard and the last one would be the Main power SATA to the PSU with the RGB from the front of the case to another RGB header 5v 3 pin on the motherboard. Is this correct? My PSU arrives today (the last piece) & Im scared to turn it on :( Any help would be much appreciated. PCG
Hope this help. ua-cam.com/video/qfoBiZ6QDgA/v-deo.html
You probably have it running by now, but the main CPU plug for the fan/AIO pump is usually in the middle, next to the CPU. I used the AIO and disabled the fan in bios. If the aRGB are all compatible and are 5v they all plug into the one 5v 3 pin RGB header on MB.
Hi, did you know that Venom that stiker or screen ? And RAM Trizedent Royal is DDR4 or 5 .. at Indonesia im searching dont have DDR 5. let me know . Tq and i see at 7.08 ( using NZXT and Next is Ryuzin II)..
Do I need any splitter for this build?
What is that venom led thing is? where can i buy it
This PC on a ramp
Judges: You got the title
Gf: is he thinking about girls
THE GUY:
i've same setup but with asus 3090 and view 71 case!, good to see my pc building :D
good video but why in the whole video u use the same music is a little boring :/
That's not Lian Li 0-11 mini or XL, thats the original no?
We can just watch. I love watching things i cant afford😭
this is the most beautiful thing I have ever seen
Hey Builder PC, I am a huge fan and am interested on what tools you have at your disposal. If you happen to read this… could you PLEASE let me know what tools you use. I started building recently and put a 12700F and AMD rx 6900 xt Nitro SE build together. I did a pretty good job, but really I struggled with the tools I had, and questions about whether what I was doing was done properly. For example, I have 300 dollars worth of tools. With really good options to work with (so I thought), I still managed to struggle. I wasn’t sure if I was tightening certain screws to hard and etc. I didn’t purposely try and tighten screws extremely tight, but still I digress. If you anyone reads this and could like it, it may help in receiving a response on what tools Builder PC uses. Thank you!
Screws on a pc dont have to be that thight if you dont trust it get a torque ratchet wich sets to like 5nm-10nm
Tools? A $3 philips screwdriver and a pair of $2 tweezers.
Why don’t use 12900ks
3090ti?
Hi have the same pc...i only just have rtx3090...instead of rtx 3080
Is the Ryujin ii 360 actually good and reliable??
Anything ASUS made is good and reliable!
7:07 🤔 *mudou o water cooler pra um outro redondo*
WOW THATS THE COOLEST HARDWARE I EVER SEEN IN MY ENTIRE LIFE
2 unterschiedliche GPU Kühler im Video ??? 🧐
Seeing these amazing eye candy 🍬🍬🍬 shots on my 2k gaming laptop feels satisfied ❤️
Is it a futuristic psu?
How much is that pc something like this would be a dream come true one day I will get something like this
i see 2 pumps at 7:09. besides the ryujin 2 it shows NZXT one
I dont have a computer since when I was HS :(, wish I have 1 for my school cuz I love editing videos and rendering 3d projects.
What's the ram speed
I would have went for the corsair lcd aio that also supports lga 1700
Would this build still work well if you replace the cpu and graphics card with AMD's Ryzen™ 9 5900X Processor, 3.7GHz w/ 12 Cores / 24 Threads and RX 6900 XT Threads ? Literally keeping everything else the same, case, motherboard, RAM, power and cooling etc.
Just Google amd 5950x motherboard type and check the one in the videos to see if it would work in it
@@0xBlez Thanks for that...will do :-)
Try putting the Ryzen 9 5950x in the LGA 1700 socket please. Tell me how it goes please :D
Where to buy that venom led?
Am I being dumb? Where's the power supply stored?
A giant and very powerful wizard.. Really, can you help me to buy something like it because I don't have the money.. Please help me
That's not lian li o11 dynamic mini and not the XL one, this is mid tower
Yea, I was like there no way there’s that much space between the ram and aio
7.07 Nzxt Cooling... What Is?
Please add all components price
case LIAN LI O11D MINI-X or LIAN LI O11 DYNAMIC XL BLACK ???
tbh i think it's neither ant they made a mistake... I think its a normal Lian Li O11 Dynamic Black
I'm not the only one that got triggered watching him scratch the gpu box with the safety blade....
does the suprim card and lian li gb-001 fit perfectly, i have read of some cases in reddit that using the bracket and cards like suprim x wont fit, as the pcie lock wont close or click when the gb-001 is installed, or does the gpu pcie lock doesnt close?
This is happening to me I have a z690-f board and I cannot get the suprim x to fit
How rich is that guy...or is he just testing it somewhere