Greetings from Australia. many thanks for this vid . The WPL D12 is my first ever rc car/truck . I just like Kei vehicles . Found your info very usefull re info on alternate wheels , and drifting info ..thanks ..Chris
thankyou for this info good sir also thank you for the free printables , i hope to see more from you and your modifications in the car , i suggest more wider body kits
Hi bro, its nuce video you have there, would like to check with you regarding the deepdish stl files you provided, do i need to clue the 2 pieces into 1 wheel is it ? A bit confuse on which 3d files should i print
Hi, I am new in the wpl d12 world and i really like and enjoy ur videos, they are very clear and helpful. Do you have a link for the file for the wheels at 8:01 and also do you have a tokopedia link for me if i want to buy the product directly from you? Thx ✌🏽
Very nice video thank you for explaining everything so detailed. Just got my D12 mini and your videos helped a lot. Can’t wait to get this thing drifting.
Yes... So informative video. Unfortunately you are correct wheels available in your country is much pricey. I'll go and take your advice using Tamiya M wheel set. Thank you very much for a very good advice and sharing it with us take care always
The retro wheels is soo cute, what are the size of the hex , does it fit on tamiya CC01 ? Do you sell them on tokopedia ? Thanks before, nice to know you🙏
Checked your Thingiverse files. I couldn't use them because the STL files are broken somewhat. I'm using SImplify3D 4.0. It gets stuck in "Calculating infill"
mate, can you answer me how can I print your wheels? because these wheels have cutouts on the outside I cannot print them becuse my 3d printer cannot support them
I bought hex adapter to use 1/10 rc drift wheels. But now my screw that holds the wheel to the hub doesnt seat against the face of the wheels. The wheels center bore is larger than the stock wheel hub screw (so either I need a washer, or to find a replacement screw with a different style head to seat the wheel properly) :)
Om saya izin print velg nya yaa, itu perbedaan no support sama support apa om? Saya mau pakai hy style support tapi di velg yg no support masuk gak om?? Terimakasih
As I already mention in video, a "thin" plastic drift wheel specifically made for D12 (in video, the one with chrome color), or you can use Tamiya M Chassis rims with a round tire.
sukses slalu om, kontenmu sangat bermanfaat di bidang RC , selalu utamakan kualitas pasti banyak yg suka, jgn kek chanel sebelah modal bacod tong kosong nyaring bunyinya hahaha....
Did subs 😂 mate you are cool Thanks for all advices. Soon gonna start and work on my D12 - things is I just want to modify it a bit - motor / transmision / esc / plus transmiter / rims + tyres For rims will try find some on market or in last case to print any of your models
Such a highly informative vid! Excellent work ethic and quality man!
LOADS of detailed info! Great vid, even now years later!
Greetings from Australia. many thanks for this vid . The WPL D12 is my first ever rc car/truck . I just like Kei vehicles . Found your info very usefull re info on alternate wheels , and drifting info ..thanks ..Chris
thankyou for this info good sir also thank you for the free printables , i hope to see more from you and your modifications in the car , i suggest more wider body kits
What screws or bolts did you use to attach the 1/10 rc wheels?
Thanks man! you saved me a lot of trouble trying to get my newly ordered rims to fit
Hi bro, its nuce video you have there, would like to check with you regarding the deepdish stl files you provided, do i need to clue the 2 pieces into 1 wheel is it ? A bit confuse on which 3d files should i print
Hello, what do you recommend for outdoor rally? Rubber is too grippy
Hi,
I am new in the wpl d12 world and i really like and enjoy ur videos, they are very clear and helpful.
Do you have a link for the file for the wheels at 8:01 and also do you have a tokopedia link for me if i want to buy the product directly from you?
Thx ✌🏽
You seem like a cool ass person just from these rc videos
The exact clip I needed many thanks!
Very nice video thank you for explaining everything so detailed. Just got my D12 mini and your videos helped a lot. Can’t wait to get this thing drifting.
What size screws did you use for the tamiya wheels?
I just learned more on this vid than in the last few months. 😁 hey thanks I really like the vids. Keep it up bro. Peace to you and your country.
Thanks man :)
If I use the second cheap wheels designed for WPL D12 but still using the old motor, will it be ok?
Yes... So informative video. Unfortunately you are correct wheels available in your country is much pricey. I'll go and take your advice using Tamiya M wheel set. Thank you very much for a very good advice and sharing it with us take care always
The retro wheels is soo cute, what are the size of the hex , does it fit on tamiya CC01 ? Do you sell them on tokopedia ? Thanks before, nice to know you🙏
Checked your Thingiverse files. I couldn't use them because the STL files are broken somewhat. I'm using SImplify3D 4.0. It gets stuck in "Calculating infill"
mate, can you answer me how can I print your wheels? because these wheels have cutouts on the outside I cannot print them becuse my 3d printer cannot support them
If you put tape on rear wheels, will they just slip?
Awesome truck and review! Just subscribed 👍 👍
Thank you for this video cuz this helps me a lot
Very much information I got here!
I'm definitely going to print the wheels you linked. very nice :)
Can we put tamya m chassis wheels ?
tell me pls if rims 20mm which size should be tires? i want to tune my k969 but have no understanding how to fit wheels
So basically I can drift without adding Gyro in? I just need proper drift tires and I’m ready to go?
Will 1/10 wheels fit 1/24 models?
I bought hex adapter to use 1/10 rc drift wheels. But now my screw that holds the wheel to the hub doesnt seat against the face of the wheels. The wheels center bore is larger than the stock wheel hub screw (so either I need a washer, or to find a replacement screw with a different style head to seat the wheel properly) :)
Did you ever find a solution to this? I’m having that problem right now. I don’t know where I would even find a washer so small.
Awesome explanation 🙏🏽🤙🏽
Do you have to use a hex adapter for the watanabe rims in the description?
Yes. The watanabe rims using 12mm hex.
What size screw driver
Wow nice Wheels 👍👏
Thanks brother 😁
Thank you so much for this video and all the links you put 😉👍
You're welcome brother 😁
Thank you so much for this video!
How can I order your tires ?
What 3D printer do you use / recommend if someone didn't want to take up too much space?
I use ender 3 v2. It's a standard / common size. Not too big nor small.
Lots of good info..thanx!
Thanks for stopping by 🙏
Thx man I printed the parts! :)
Good video! Informative.
Thank you :)
Om saya izin print velg nya yaa, itu perbedaan no support sama support apa om? Saya mau pakai hy style support tapi di velg yg no support masuk gak om?? Terimakasih
What wheels do you recommend to do drift with factory?
As I already mention in video, a "thin" plastic drift wheel specifically made for D12 (in video, the one with chrome color), or you can use Tamiya M Chassis rims with a round tire.
Will a 26mm wheel fit on the wpl d12?
26mm diameter? It's a little bit small isn't it? Fyi, the Tamiya M Chassis wheels is 42mm in diameter (around 54mm with drift tire).
@@gadogamix So a 42mm wheel is good for the d12?
@@finna.blast.g Well, it looks like in the video. But some people prefer smaller wheels + fat tire, but not as small as 26mm. Maybe in between.
sukses slalu om, kontenmu sangat bermanfaat di bidang RC , selalu utamakan kualitas pasti banyak yg suka, jgn kek chanel sebelah modal bacod tong kosong nyaring bunyinya hahaha....
beaver's hobby of wpl d12, lol
mantapp
Makasih bro. Utk video versi bahasa Indonesia, cek KuikTip channel ya.
i just took the rubber off the stock wheels
👍🏻👏🏽👏🏽✌️😎
😁🙏
Perfeito,,,,,,,,,,
Thank you :)
sama kek yt kuik tm
KuikTip mungkin maksudnya. Itu channel kita juga :)
Bahasa Inggris 🗿
Did subs 😂 mate you are cool
Thanks for all advices. Soon gonna start and work on my D12 - things is I just want to modify it a bit - motor / transmision / esc / plus transmiter / rims + tyres
For rims will try find some on market or in last case to print any of your models
Seriously you purchase so many wheels for a 50$ truck 😏😁wheel wheel worth 200$
😁 You've got a point
Kok Kek Chanel Kuik Apa Yha
Emang channel kuiktip cuman bahasa ingris
Bahasa indo aja 🆖🆎 biar gampang 😭😭😭
Yang bahasa indonesia disini bro: ua-cam.com/video/ua1pHjYlkGg/v-deo.html