uuuh dude... just use your dead battery... open the battery, remove the dead cells and connect the wires of your adapter to the poles of battery... so you can use one adapter to all of your tools 😜
Also to achieve the maximum possible performance of your motor, you can use a 21V-3.5A or 18V-4A adapter (a higher power adapter than the numbers I suggest, will obviously deliver more power to motor, but I wouldn't recommend it as it can toast your tool's mosfets)
why not use female and male adapters and glue them in place, so you dont have to cut wires of the charger and you also dont have to have it corded all the time?
Hello. How can i Convert my Tolsen Brand Cordless Circular saw into Corded? My Cordless Circular saw is for 20 volts...Please help if it is safe to turn into Corded?
Hi, thank you for question. You need to find from 18v to 22v power supply and pay attention to amperage. Drill will need high Amper, 3.5A or even 4A. Please correct me, if I am wrong! I am self educated not a specialist :).
Why fuck up the cordless part why not just take an older battery pack and mod it ? That way you can have cord when you need it ? craftsmen haa a pressure washer I want to do this too.
Yea there are projects to do so, but its bit challanging complex thing to change ac to dc and than to ac again (or sth, im no expert) so basically its adviced to buy dedicated adapter or just buy corded tool as its usually cheaper, sturdier, more powerful and reliable than cordless and to use latter in situations where you cannot use cord.
@@MrZurikmurik I thought, the charger charge the battery with the same 18v. My battery didn't work, so i want to put wires on charger directly to the drill. Do you think it will works? Plss help me sir. I don't have money to buy drills. My friend gave me this drill but the battery are useless 😔😔😔
@@rhenanlandayan0629 BMS is battery management system. If you take directly from a charger it won't have enough power as the battery would have. Charger is built to charge battery with higher voltage but lower amps.
@@MrZurikmurik thanks a lot sir. Now i understand. Maybe i need to buy 18v adopter. But i don't know what is the meaning of 18v 2A UK, 18v 1.5A UK, US and EU has it also. 😔😔😔
Hi brother i have charger og 21 volt and 0.8 amp and battery is 18 volt li-ion 1.3Ah And readings on cordless drill machine are 12volt 18-25 NM. I want to to convert it to corded drill machine plz suggest me a adopter or supply please.
@@husnainlicious7935 sorry, I am not sure why battery is higher voltage than the drill tag. For me it seams over-voltage supply 18v to equipment tagged to work with 12v. Sorry. You have to decide, what you want to do in this case.
Had a friend request doing this to a cordless vacuum. Modifying electrical equipment for your own use is one thing, but I refuse to do this for my friend. The UL listing is non existent. If their home burns down, I don't want to be the one responsible.
This is incredible!!! Thank you for your knowledge! I need to learn how to do this for my cordless vacuum!!
uuuh dude...
just use your dead battery...
open the battery, remove the dead cells and connect the wires of your adapter to the poles of battery...
so you can use one adapter to all of your tools 😜
Great idea 💡
Also to achieve the maximum possible performance of your motor, you can use a 21V-3.5A or 18V-4A adapter
(a higher power adapter than the numbers I suggest, will obviously deliver more power to motor, but I wouldn't recommend it as it can toast your tool's mosfets)
@@nikosks1106 absolutely, I agree with you, but I used what I had.
i have a boscg vacuum that i would like to make corded Model #GAS18V-3N. what kind of adapter do i need?
why not use female and male adapters and glue them in place, so you dont have to cut wires of the charger and you also dont have to have it corded all the time?
Good idea, please put a picture here if you will do that way.
Hello. How can i Convert my Tolsen Brand Cordless Circular saw into Corded? My Cordless Circular saw is for 20 volts...Please help if it is safe to turn into Corded?
Hi how can i convert my 18v OZITO cordless drill to corded? thanks
Hi, thank you for question. You need to find from 18v to 22v power supply and pay attention to amperage. Drill will need high Amper, 3.5A or even 4A. Please correct me, if I am wrong! I am self educated not a specialist :).
@@MrZurikmurik I would go with 6.5A for that.
Why fuck up the cordless part why not just take an older battery pack and mod it ? That way you can have cord when you need it ? craftsmen haa a pressure washer I want to do this too.
What if I want to make a corded tool run on batteries 🔋 🤔
Good question, first of all you have to replace AC motor with DC.
Yea there are projects to do so, but its bit challanging complex thing to change ac to dc and than to ac again (or sth, im no expert) so basically its adviced to buy dedicated adapter or just buy corded tool as its usually cheaper, sturdier, more powerful and reliable than cordless and to use latter in situations where you cannot use cord.
Is this tool brushless
No, it is brushed .
Hi sir, can i use the battery charger of my cordless drill as an adopter?
I don't think so! Your battery charger might have a BMS inside.
@@MrZurikmurik I thought, the charger charge the battery with the same 18v. My battery didn't work, so i want to put wires on charger directly to the drill. Do you think it will works? Plss help me sir. I don't have money to buy drills. My friend gave me this drill but the battery are useless 😔😔😔
@@MrZurikmurik what is BMS?
@@rhenanlandayan0629 BMS is battery management system. If you take directly from a charger it won't have enough power as the battery would have. Charger is built to charge battery with higher voltage but lower amps.
@@MrZurikmurik thanks a lot sir. Now i understand. Maybe i need to buy 18v adopter. But i don't know what is the meaning of 18v 2A UK, 18v 1.5A UK, US and EU has it also. 😔😔😔
Hi brother i have charger og 21 volt and 0.8 amp and battery is 18 volt li-ion 1.3Ah
And readings on cordless drill machine are 12volt 18-25 NM. I want to to convert it to corded drill machine plz suggest me a adopter or supply please.
Hi, if drill has a tag 12v, please use AC to DC 12v pover supply at least 3A .
But the tag is 18v 1.3amp and drill machine tag is 12v
@@husnainlicious7935 sorry, I am not sure why battery is higher voltage than the drill tag. For me it seams over-voltage supply 18v to equipment tagged to work with 12v. Sorry. You have to decide, what you want to do in this case.
Which adapter is best for 18v drill
The power of your adapter is only like 70 watts ,thats not enough to work properly. The tool you used requires like 600 or something..
You might be right, but I still use it.
Had a friend request doing this to a cordless vacuum. Modifying electrical equipment for your own use is one thing, but I refuse to do this for my friend. The UL listing is non existent. If their home burns down, I don't want to be the one responsible.
I want to convert my circular saw to corded.. Can you help me man?
Hi, let's try. Send me the model number.
add voice please!
Прости Алексей, микрофон испортился, если будут вопросы просто задавай тут и буду отвечать. там все очень просто.
@@MrZurikmurik 🤣