Hi, Ich habe den Fehler 202 und 201 gelöst. Es können allerdings auch andere defekte bestehen die den gleichen Fehler auslösen. Dieses Video ist keine Garantie für eine erfolgreiche Reparatur
Hello Kenji, you have to solder the pink sensor again. This is an optical sensor which reads these small lines on the round disc. Remove the cover from the X-axis engine and lower the black cover at the back. When you turn on the machine, this sensor must be red. If it does not light then it needs to be re-soldered.
Hi I have a e-1501C and when I add the cap driver and trace the Y-axis is malfunctioning. I am getting error 202 where irregular signal is detected. Without the cap driver the machine works and embroiders fine. Please is there anything you can think of?
könnte jemand sagen, ob diese Diode gekauft werden kann und wo, oder was ist ihre Spezifikation, warum ich es nicht finden kann danke schön someone could say if that diode can be bought and where, or what is its specification why I can not find it Thank you
Hola, en el video puedes ver el sensor transparente ... Tiene 6 pines que están soldados a la placa. Tienes que volver a soldar estos 6 pines con un soldador y una punta muy pequeña. Esto es un poco peligroso porque el sensor está hecho de plástico y también puede derretirse. Es por eso que necesita una pequeña punta en el soldador. Ya no tengo la máquina y ya no puedo mostrarla. También puede dárselo a un electricista que pueda volver a soldarlo.
Hi, Yes you can replace this sensor, but it is noch easy to find the same sensor. This is an optoelctronical sensor with 6 pins. I have sold my machine and can't look at my machine.
Hello Kenji, you have to solder the pink sensor again. This is an optical sensor which reads these small lines on the round disc. Remove the cover from the X-axis engine and lower the black cover at the back. When you turn on the machine, this sensor must be red. If it does not light then it needs to be re-soldered.--------------Transalte:-------------Hola, Kenji, tienes que volver a soldar el sensor rosa. Este es un sensor óptico que lee estas líneas pequeñas en el disco redondo. Retire la cubierta del motor del eje X y baje la cubierta negra de la parte posterior. Cuando enciende la máquina, este sensor debe ser rojo. Si no se enciende, entonces necesita volver a soldarse.
Hello, I wanted to thank your video. I managed to solve the x-axis problem of a swf ma-6 machine now in 2024 thanks to your video.
Hi, I'm glad to hear that... Thanks for watching
Hello Kenji, you have to solder the pink sensor again. This is an optical sensor which reads these small lines on the round disc. Remove the cover from the X-axis engine and lower the black cover at the back. When you turn on the machine, this sensor must be red. If it does not light then it needs to be re-soldered.
daniel e se o sensor tiver vermelho e mesmo assim da erro oq pode ser, parece que quando esquenta que começa da erro
@@adrianobordados8420 Hi, can you please write with the translator in English or german? Thank you very much.
Thank you for this clip, it saved me a lot of money.
Hello, I'm really happy that I was able to help you... If you have other problems with electronics or anything else, feel free to write here
thx dude you saved my life. my x motor has same error, ı oped it up,sensor is working but dics is so dity l cleaned it up with cotton
Hi, cool, I'm very happy... If you have other problems... Write me
Yo tengo wl error wn x también ya revisamos Todo y no le encuentran qué me recomiendas hacer
wow that's absolutely great
But it can also be the Y engine which causes the same hen error ... But it is the same technique and can also be repaired as well
Hi I have a e-1501C and when I add the cap driver and trace the Y-axis is malfunctioning. I am getting error 202 where irregular signal is detected. Without the cap driver the machine works and embroiders fine. Please is there anything you can think of?
Hi, how old are the machine? Is this problem new or old.
Since when do you have the problem? Did it work earlier or has it always been the problem? Can it be that the frame gets stuck somewhere?
Como se puede arreglar le motor 202 de bordadora SWF grs.
Please how did you make it fix?
Olá, estou com o mesmo erro na máquina, porém o sensor está acendendo a luz normalmente, já tentei limpar e nada adianta, não sei o que pode ser
Hi Guilherme, can you please translate this to german right away? Unfortunately, I can't copy and paste this into the translator. Thanks
Tô com o mesmo erro que você
könnte jemand sagen, ob diese Diode gekauft werden kann und wo, oder was ist ihre Spezifikation, warum ich es nicht finden kann
danke schön
someone could say if that diode can be bought and where, or what is its specification why I can not find it
Thank you
Kannst du genau erklären was du meinst? Welches Problem hast du
Hi, I write in German, ich habe diesen Sensor, den ich in groß gezeigt habe, neu angelötet mit dem Lötkolben.
A mi me da el error 202 de ese motor como puedo repararlo por favor enséñanos
Hola, en el video puedes ver el sensor transparente ... Tiene 6 pines que están soldados a la placa. Tienes que volver a soldar estos 6 pines con un soldador y una punta muy pequeña. Esto es un poco peligroso porque el sensor está hecho de plástico y también puede derretirse. Es por eso que necesita una pequeña punta en el soldador. Ya no tengo la máquina y ya no puedo mostrarla. También puede dárselo a un electricista que pueda volver a soldarlo.
Hallo Daniel wäre es irgendwie möglich sich mit ihnen in Verbindung zu setzen
Hallo Harald, klar, hast du auch ein Problem mit deiner Maschine?
@@danielderbastler ja leider wir sind mit der fadenspannung am verzweifeln
@@haraldw.w4142 also ich kann dir meine Email Adresse geben. Dann kannst du mich anschreiben
Danke ich schreibe dir nachher ne Mail
Danke ist notiert
can I replace this sensor ?, because mine already soldered so much that it stopped working!
Hi, Yes you can replace this sensor, but it is noch easy to find the same sensor. This is an optoelctronical sensor with 6 pins. I have sold my machine and can't look at my machine.
Search in Google and eBay for smd infrared sensor or smd opto electric sensor
@@danielderbastler ok bro, thanks for watching!
@@H3LD3R22 If everything doesn't work, send the engine in the mail and I can see that I can get it done.
como puedo arreglar ese motor. se me acabo de dañar uno de esos.
Hola Adrián Fajardo, ¿Qué problema tienes? ¿Tiene el error de señal irregular detectado?
Hello Kenji, you have to solder the pink sensor again. This is an optical sensor which reads these small lines on the round disc. Remove the cover from the X-axis engine and lower the black cover at the back. When you turn on the machine, this sensor must be red. If it does not light then it needs to be re-soldered.--------------Transalte:-------------Hola, Kenji, tienes que volver a soldar el sensor rosa. Este es un sensor óptico que lee estas líneas pequeñas en el disco redondo. Retire la cubierta del motor del eje X y baje la cubierta negra de la parte posterior. Cuando enciende la máquina, este sensor debe ser rojo. Si no se enciende, entonces necesita volver a soldarse.
can you show me your problem
and maybe it can help you
daniel w I’m having error 202 but I need an explanation on how to fix it in English.
Esplicame en español