Deborah Jones shows you what could be causing thread breaks and how to correct them. For more tips and tricks on embroidery, visit our blog at www.embstore.com/ today!
Dear Deborah Thank you so much for your video. I have a New Brother NV800e and was going nearly nuts with endless thread breaks after being advised to watch this video I polished the throat plate and the metal bobbin cradle with was full of burs and serrations. I think the machine metal bobbin cradle was not machined cleanly when made. After polishing the two carefully. I reassembled the lot and off I went with no more thread breaks. This evening I broke a needle when a thread snagged. The dreaded tread fraying returned, this time I returned and polished the throat place and which had a few rough spots on it and in no time we were back up and running. Thank you so much for your video it has been a great help to me. Regards.
Grit from 180 to 200 will be safe. I personally like the 59C crocus TAPE that is about 1/4" wide and 200 grit or 52C cord that is narrow like shown in the video and 180 grit. Hope this helps.
Dear Deborah Thank you so much for your video. I have a New Brother NV800e and was going nearly nuts with endless thread breaks after being advised to watch this video I polished the throat plate and the metal bobbin cradle with was full of burs and serrations. I think the machine metal bobbin cradle was not machined cleanly when made. After polishing the two carefully. I reassembled the lot and off I went with no more thread breaks. This evening I broke a needle when a thread snagged. The dreaded tread fraying returned, this time I returned and polished the throat place and which had a few rough spots on it and in no time we were back up and running. Thank you so much for your video it has been a great help to me. Regards.
Thanks for letting me know! Happy you are back up and running. It's great hearing that machine sing...
what size crocus cord did you used?
@@deborahjones1364 what size did you use in the video?
Never used Crocus cord before, thanks for the advice!
What size of Crocus cord do you get? This was most helpful.
What size cord do you use please
Hi how do I get a design from my machine to a USB stick SWFT1201C
How do you know what size and grit for your machine?
Grit from 180 to 200 will be safe. I personally like the 59C crocus TAPE that is about 1/4" wide and 200 grit or 52C cord that is narrow like shown in the video and 180 grit. Hope this helps.
@@deborahjones1364 Thank you a bunch!
thnx