Volvo XC90 Front Brake Pad and Rotor Replacement DIY (2003-2014 Volvo XC90 P2 3.2, R-Design, V8)

[@mr.carlossalazar]

I found that I needed a 9mm hex for the front caliper slide bolt and not 7mm as described here (2013 r-design) 19" wheels.

[@timevans80]

Thank you for confirming my suspicions! I also have an RDesign but no 9mm hex

[@johnathonmcalister6645]

Brakes are a great way to get started in auto DIY. Note that XC90 can have different brakes on front and back, so even if you have the correct size for the front, be sure to check the size again when doing the rear wheels.

[@fcpeuro]

💯

[@kordtez35]

Which caliper sliding pin goes where? I have 2 different sizes. Thank you

[@RichardPelletier-q7x]

Thank you you are a big help 👍

[@Bonny_Ferz]

Thanks!

[@miguelaperalta7027]

Thank you for the training class

[@fcpeuro]

Any time!

[@GizmoNx]

Wrong this hex bolt with no lube install... Look at specfic ATE ;)