Use a drinking straw and cut out spoon shape in the end so you can tap the baking soda into the lure,I use a lot of the sawdust I get from sanding with super glue as well the fill in void,just put a box under your sander with a piece of cardboard sticking up so the sawdust will hit it and fall into the box,I like your videos
Hello. Good work. Congratulations. I also make wooden lures. Just one observation, which I consider important: i have noticed that epoxy does not stick very well when applied directly to surfaces treated with cyanoacrylate. First I apply an acrylic primer over the cyanoacrylate and then the epoxy over the primer.
Thanks 🙏 I haven't noticed that, that's the standard sequence for all my wooden lures and I never had an instance of epoxy chipping off the wooden blank 🤔 Happy New Year 🥂👋🎣
I've had other BPM baits ua-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!
Buoyancy and easiness of carving, therefore I would pretty much just use Balsa (for smaller lures, unless their sinking) or Bass Wood. Bass wood I'll also use for the detailed carved lures if their sinking 😉
Balsa wood for the lures up to 5cm (fresh water only), bass wood for the bigger floating lures, and smaller lures with carved details, then ash or oak wood for big sinking lures 😉
Hi Blake 👋 the wood is bass/linden wood and the grey and red thingy is a two part car body filler putty (the brand is Dutch) but if you Google it, for sure you're find one produced locally in your country 😉
Hi, obviously I did and indeed that should have been included in this part... Unfortunately I edited the video in the plane, beeing 22h without sleep 🙄 it will be first thing in the part 2 👌
Jak najbardziej 👌 jeżeli robisz głównie z lipy, albo nawet twardszego drewna, to usprawnia proces bardzo 😊 jakościowo też dobra, ogólnie polecam narzędzia Parkside, mam kilka, w tej kategorii cenowej najlepsza jakość 💪
@@TheAdiko21 druga część tej przynęty, malowanie oklejanie, i miejmy nadzieję, że również łowienie, ale jak na razie ocean jest zbyt wzburzony na powierzchniowe przynęty 😞
Hi Fish Daddy 👋 unfortunately I did not edit the video before going to Seychelles... and there I just walked into the ocean with my phone in the pocket 🫣 so most of the footage got corrupted on the SD card 🤦 check out this video, the weight placement and the sitting position in the water are the same: ua-cam.com/video/3eofi8hTIQU/v-deo.htmlsi=zVWo5__XqSfILw7O
Sebenarnya untuk saat ini saya tidak menjual umpan saya... Hanya tidak cukup waktu antara pekerjaan saya sehari-hari, keluarga, memancing dan membuat umpan untuk You Tube 😪 silakan berlangganan saluran jika saya akan mulai menjualnya pasti saya akan menyebutkannya di video saya 😉
@@LeviVanSluijs hot and sunny 🔥 first morning fishing, with two attacks of blue fin Trev, but no hook up 😞 tomorrow we will go earlier in the morning 💪
Thank you for the shout out... I enjoy watching your builds.
You're welcome 😀 same here 😉
I’m a bit late but I’m watching this and from Seychelles 🇸🇨🇸🇨
Nice 👍 I had a great fishing and holiday there 🌴🏝️🎣 I hope to come back some time 🙏
Well done and again a perfect nice video. 🍀🌞👍
Thanks mate 😊
This week in Bulgaria have that disk sander from Lidl. I will planned to buy it.
Thanks for another great video. Keep pushing.
Hi 👋 definitely worth the money, make the job much faster and more precise 👌
Agreed more of a professional job much more square and precise
That’s how I roll 😂 I love it
Thanks man 🙂
Rzeczywiście jesteś bardzo wykwalifikowany i życzysz powodzenia w swojej pracy
Dziękuję 😉 wczoraj złowiłem swoją rekordową rybę na tą przynętę 😍 10kg Jack Fish 💪
A pleasure to watch you...Champion
Thank you my friend ☺️ I also watched your popper video today 😅 all the best 👋🎣
@@SuchaJerkCustomLures thank you very much my dear friend
Another great video! :D
Thank you 😊
Fish on 🎣🎣🎣🎣💪💪💪🐟🐟
So far no luck, due to the rough seas, but let's hope I get some GT before the end of the holiday 🤞
Gracias amigó por compartir tus vídeos esperó verlo terminando saludos
Hola Feliz 👋 subiré la segunda parte en dos semanas 🗓️
Use a drinking straw and cut out spoon shape in the end so you can tap the baking soda into the lure,I use a lot of the sawdust I get from sanding with super glue as well the fill in void,just put a box under your sander with a piece of cardboard sticking up so the sawdust will hit it and fall into the box,I like your videos
Nice idea 👍 I will definitely try
Hello. Good work. Congratulations. I also make wooden lures. Just one observation, which I consider important: i have noticed that epoxy does not stick very well when applied directly to surfaces treated with cyanoacrylate. First I apply an acrylic primer over the cyanoacrylate and then the epoxy over the primer.
Thanks 🙏 I haven't noticed that, that's the standard sequence for all my wooden lures and I never had an instance of epoxy chipping off the wooden blank 🤔
Happy New Year 🥂👋🎣
I've had other BPM baits ua-cam.com/users/postUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!
And this is the floating stickbait 🤔 what with this comment 🤔
Have you tried crimps on the stainless steel wire vs wrapping? Super quick and easy :)
Hi, yes I did 🙂 I believe I did it on my diving popper video 😉 definitely stronger and quicker method 👌
@@SuchaJerkCustomLures it makes the harness abit bulkier, but quick as a flash…if you get the crimps on pre-bending ;)
Thanks ❤❤i subbed this ❤
Thank you 🙏🎣👋
grande trabalho amigo.abraço ai para Polonia.
Obrigado Jorge 🙏 abraços
Can you please tell me what wood you used?Also can you please tell me the thickness?
The wood is a bass / linden wood. The thickness, I'm not sure exactly, but the finished lure is 2.5cm/1" wide 😉
what qualities do you look for when choosing your wood to make a lure?
Buoyancy and easiness of carving, therefore I would pretty much just use Balsa (for smaller lures, unless their sinking) or Bass Wood. Bass wood I'll also use for the detailed carved lures if their sinking 😉
What type of wood do you use or in your experience which is the best for lures?
Balsa wood for the lures up to 5cm (fresh water only), bass wood for the bigger floating lures, and smaller lures with carved details, then ash or oak wood for big sinking lures 😉
Hi can you share with me what wood you used and what the grey and red filler was and what brand, thanks
Hi Blake 👋 the wood is bass/linden wood and the grey and red thingy is a two part car body filler putty (the brand is Dutch) but if you Google it, for sure you're find one produced locally in your country 😉
What sealer you use?
I'm using super glue as a sealer 😉
Thank you! I Sub, great work! Keep it 💯
Hello.I understand you didn't use weights?Tnx👍
Hi, obviously I did and indeed that should have been included in this part... Unfortunately I edited the video in the plane, beeing 22h without sleep 🙄 it will be first thing in the part 2 👌
@@SuchaJerkCustomLures ok😉I thought the filling solution would do the job of weight, being much heavier than the wood itself.
@@zemi.j.28 the it probably would together with the heavy hooks and split rings, but I'm not sure the rolling action would be achieved 🤔
Well done 👍🤘👏
What kind of wood is that
Thanks 🙂 it is a Linden wood/bass wood 😉
@@SuchaJerkCustomLures tnks i also make lures u bin very helphul 🍻from Zadar 🇭🇷
Saludos. ¿Que tipo de madera es esta ? gracias.
Hola Jose 👋 es madera de tilo 🌳
@@SuchaJerkCustomLures muchas gracias hermano bendiciones
Thanks mr
You're welcome 😁
@@SuchaJerkCustomLures 😀
what type of wood are you using?
Hi there 👋 it is bass wood, or linden wood as it's called in Europe 😉 it's relatively hard and strong for it's buoyancy, it also caves very nice 🙂
Ta szlifierka talerzowa daje radę ? zastanawiałem się nad nią bo jest taka zgrabna i nie głośna polecasz ?
Jak najbardziej 👌 jeżeli robisz głównie z lipy, albo nawet twardszego drewna, to usprawnia proces bardzo 😊 jakościowo też dobra, ogólnie polecam narzędzia Parkside, mam kilka, w tej kategorii cenowej najlepsza jakość 💪
@@SuchaJerkCustomLures super dziękuję za poradę, głównie balsa i lipa, jaki bedzie kolejny filmy? 🤔
@@TheAdiko21 druga część tej przynęty, malowanie oklejanie, i miejmy nadzieję, że również łowienie, ale jak na razie ocean jest zbyt wzburzony na powierzchniowe przynęty 😞
@@SuchaJerkCustomLures to czekam, ocean? To w jakim miejscu łowisz
Kawatnya ukuran berapa mm?
1.2mm
Were is the weight
Hi Fish Daddy 👋 unfortunately I did not edit the video before going to Seychelles... and there I just walked into the ocean with my phone in the pocket 🫣 so most of the footage got corrupted on the SD card 🤦 check out this video, the weight placement and the sitting position in the water are the same:
ua-cam.com/video/3eofi8hTIQU/v-deo.htmlsi=zVWo5__XqSfILw7O
Witam co to za szpachla
Samochodowa, kupiona 6 lat temu w Holandii, w sklepie Action, ale jeśli masz taki sklep u siebie, to w polskim Actionie nadal mają ją w ofercie 😉
Sta venendo un bel lavoro, Mi immagino che ci sarà Però un secondo video?
Grazie Nicola 🙏 la seconda parte tra due settimane 😉
@@SuchaJerkCustomLures grande!!aspetto con grande curiosità 😉
👍👍💖💖🐠🐠
🙏🙂🇵🇱🎣👋
Bisa pesan kah ...
Sebenarnya untuk saat ini saya tidak menjual umpan saya... Hanya tidak cukup waktu antara pekerjaan saya sehari-hari, keluarga, memancing dan membuat umpan untuk You Tube 😪 silakan berlangganan saluran jika saya akan mulai menjualnya pasti saya akan menyebutkannya di video saya 😉
Can you give one for me😂
Nope, they're all my precious 😜😅
Hi
Hi from Seychelles Levi 👋🌅🌴🎣
@@SuchaJerkCustomLures how is it going there
@@LeviVanSluijs hot and sunny 🔥 first morning fishing, with two attacks of blue fin Trev, but no hook up 😞 tomorrow we will go earlier in the morning 💪
@@SuchaJerkCustomLures sounds nice good luck fishing 🎣
Woodglut instructions is nice for that.
Thanks 🙏👋🎣🇵🇱
What do you use to seal the wood???
Hi, so called super glue, so cyanoacrylate glue 😉