Daiki brings in a whole other dynamic to the videos and I'm here for it! Even if he doesn't talk that much, he's a really really awesome addition to the team and I hope he stays! Great video!
Unpopular opinion, but the rb20e is a fine motor. With an RB30 manifold, double stacked head gaskets, upgraded head studs, 4 bar MAF, big oil cooler and RB25DET injectors they can be a lot of fun. You can also throw on an RB20det head and run the RB20det sensors, harness, and ECU and you'll have a poor man's RB20det lol. The single jingle loves a mild cam regrind too. Seen one with 400 at the tire years ago, didn't last long though. Low 300's is probably doable reliably. I used to not bother selling rb20e's because they were undesirable(not bad, but no one wanted them). Now 10 years later I wish I held onto them and built a few up. The head casting on the E also sucks, a quick clean up of the ports and smoothing out the casting blemishes should do wonders. For some reason I don't see you running the E long enough to want to do any of that though, when you have so many better options.
I think my wife would approve of that T-Shirt...As I got car parts literally EVERYWHERE.... In the Bathroom, In the living room, In the hallway, even the staircase leading up to the bedroom has an aluminum alloy driveshaft just chillin in the corner, I got catalytic converters hiding under my bed my new stainless exhaust in the corner in boxes....And in our storage area I got a couple fenders, boxes of wiring, seats, a core support, a couple dash boards, chrome wire wheel covers for some old car I had....a set of Subaru aftermarket wheels I'm using as a table, My new tires I need to go get mounted...And uh....much, much more.
She sounds amazing! 🙌 Glad you mentioned the safety issue with the hoodie strings. Many people have gotten sucked into their engine bay and gotten serious injuries.
It actually sounds really really good! Can't wait till it's running right and has the intercooler on there. If not a drift missile, just a mad shop car
I have the eBay spec kit on my 25de 33, went air to water intercooler kit to straight from the turbo to the intake to do something different, these setups are underrated, proves doesn’t take $10k setups to have fun!
2:45 I'v seen people with 2 turbo's connected in line, with a tube between the turbo's. Don'r know if the second turbo help the main turbo. or something.
Your Aussie roots/links helped because I have the same issue when I was looking for the same info to turbo my 20e and 20de neo. This series is for me 🥳🥳
I measured my living room turbo. It is a 70mm and according to my buddy that sold it me. It is good to do 700hp with some good engine. It might do enough for 6,2 Liter v8 chewy diesel engine wit 0.4bar boost or just blow it up :D
with my turboed 1gfe i plugged the factory fuel return and installed a AN line wit fuel pressure regulator as fuel return. also i got bigger injectors with a piggy bag ecu. works perfectly and is very budget friendly should work for your rb pretty good aswell
Congratulate your boy ruddy in NZ! You should get him and Jimmy in japan for another battle in a new environment! A three way merch collab would be sick to see!
Brooooooo. Im so glad to see u do this. I Still have my Rb20e in my garage for yeeaarrrrrssssssss with a custom redone top mount RB25 turbo manifold. Never got the chance to do it. Car had an issue an a fire came so i just took it out and put in an RB20Neo aspirated engine from an R34. I then turbo charged that instead. About 4 years ago. Still rag on it hard to this day on 14psi and with the aspirated ecu on a Apexi Safc 2. So I'm glaaaddddddd to see you did something so different my guy. Enjoying the content as always from over here in Barbados.
Should get a can of ceramic coating/paint in a pressure-pack and spray the turbine housing (the hot end) with it. It will do wonders to your engine bay temps. I did all the hot side and intercooler piping with it in my RB34 powered R33 and it's magic in keeping hot temps in or out from where it's not wanted.... The most important thing is that u will need to sand-blast the component/s and bake it in the normal oven for it to cure properly.
Had a mate with a vl commy 20e he added turbo and was running 11 psi safely with lite tune, some people knock the idea but a 20e+t is a lot of cheap fun
I have been looking for a solution to turbo my rb20E and couldn’t find anything thanks to you now i can replicate what you’ve done i just would like the list of parts you’ve used in the description if possible just to make it easier to just order everything but that’s just a +
You joke about a twin turbo project, but I kinda want to see one. I would imagine a small one for low RPM boost that gates to let a big one take over as the vacuum pressure goes higher.
Good ole eBay manifolds lol on mine the bolt holes did not even line up. I had to make the holes bigger and the flange was bent, I had to put the face on a large belt sander for a while but she’s Gucci now!! Works and sounds great
Hi wht did you do tht full pump with the solder is look like you di put exsta wire on it do you mke the neg or pos strong so it can bump strong the ful pressure and give. Ore fule
I'm currently building some modified bikes😉😗 all Japanese 🇯🇵 except a KTM, 5 of them are concept reversions and a GSXR street fighter, never really owned a car but did some apprenticeship work on Skylines del sols, mx5, EVO IV, 'preza etc back in '97, maddest motors otr
Do a service on the Auto, cut a hole in the bonnet, cut some of the rear coils out and drive it down to UPGarage! For a reaction!! And the Sh!ts n Giggles 👍
Gotta love sammit. How he can turn one of the worst engine on a skyline the rb20e and turbo it keep doing what your doing. Seing it shoot flames thats mental.
Maybe you should ask Oka-Chan if he can reflash the ECU like he does the SR20 ones. Definitely use the intercooler set up from the 33.4,it gives you the excuse to buy better ones for it. Worst engine was the CA20e, bad head, weak rods, very gutless.
Everybody needs a Sam in their lives. He’s just like a big kid. Love it 😂
We all are, just trying to be adults 😅
He is a big kid for sho
verybody
youtubeeeeu.com/watch?v=myV99BAFvY3
needs a Sam in their lives. He’s just like a big kid. Love it 😂
Daiki brings in a whole other dynamic to the videos and I'm here for it! Even if he doesn't talk that much, he's a really really awesome addition to the team and I hope he stays! Great video!
i love him!
Up for this 👌
She definitely hasn't worn any of those shoes 🤣🤣 This is the exact convo I visit regularly with my wife lol
Single Jingle and a full turbo - This is gonna be brilliant!
to the videos a
youtubeeeeu.com/watch?v=TO5QsTs2jx4
Single Jingle and a full turbo - This is gonna be brilliant!
the fact that this mad lad of a creation shoots flames is insane lol
I wonder how far or high this will throw a rod… or something 😅
Unpopular opinion, but the rb20e is a fine motor. With an RB30 manifold, double stacked head gaskets, upgraded head studs, 4 bar MAF, big oil cooler and RB25DET injectors they can be a lot of fun. You can also throw on an RB20det head and run the RB20det sensors, harness, and ECU and you'll have a poor man's RB20det lol. The single jingle loves a mild cam regrind too. Seen one with 400 at the tire years ago, didn't last long though. Low 300's is probably doable reliably.
I used to not bother selling rb20e's because they were undesirable(not bad, but no one wanted them). Now 10 years later I wish I held onto them and built a few up. The head casting on the E also sucks, a quick clean up of the ports and smoothing out the casting blemishes should do wonders.
For some reason I don't see you running the E long enough to want to do any of that though, when you have so many better options.
Really enjoying this sort of content keep it coming
New T-shirt coming “ I’m gonna use it one day” Sam has shown that hoarding car parts is normal 😜👌
I think my wife would approve of that T-Shirt...As I got car parts literally EVERYWHERE....
In the Bathroom, In the living room, In the hallway, even the staircase leading up to the bedroom has an aluminum alloy driveshaft just chillin in the corner, I got catalytic converters hiding under my bed my new stainless exhaust in the corner in boxes....And in our storage area I got a couple fenders, boxes of wiring, seats, a core support, a couple dash boards, chrome wire wheel covers for some old car I had....a set of Subaru aftermarket wheels I'm using as a table, My new tires I need to go get mounted...And uh....much, much more.
I'm feelin' it Sam.....when everyone says no, do this instead..... Do exactly what they said not to......PERFECT 💖👍👍💖☮️💜💙😎
Daiki is so cute when sam is asking him about the turbo😆😁
She sounds amazing! 🙌
Glad you mentioned the safety issue with the hoodie strings. Many people have gotten sucked into their engine bay and gotten serious injuries.
I love the energy of your videos! Keep doing you, Sam!
This is amazing. We need more Single Jingle Crew in our lives.
Won’t have to worry about hoodie strings when baby SAMMIT gets here. He’ll rip them out for you 😂
It actually sounds really really good! Can't wait till it's running right and has the intercooler on there. If not a drift missile, just a mad shop car
May looks glowing 😍 big love to momma to be ❤️
May looks great! She is glowing!
I have the eBay spec kit on my 25de 33, went air to water intercooler kit to straight from the turbo to the intake to do something different, these setups are underrated, proves doesn’t take $10k setups to have fun!
i am so glad you got to prove its worth saving things that are usable!
Yes take cooler kit off the 33 can put a new one on it when you start rebuilding it
Look at Sam’s face 🤣 its priceless 🥳🥳🥳
2:45 I'v seen people with 2 turbo's connected in line, with a tube between the turbo's.
Don'r know if the second turbo help the main turbo. or something.
Now it's time to drift it 😁, r33.4 content any day now
It's awesome to see how things have evolved since you left the old garage, so good!
Man that flame is something else dude can’t wait for it to be done and ripping and also the shenanigans to happen 😊😊
Your Aussie roots/links helped because I have the same issue when I was looking for the same info to turbo my 20e and 20de neo. This series is for me 🥳🥳
Never seen Sam this happy since he first started the abandoned S15.... This is awesome man🔥🔥😂
I measured my living room turbo. It is a 70mm and according to my buddy that sold it me. It is good to do 700hp with some good engine. It might do enough for 6,2 Liter v8 chewy diesel engine wit 0.4bar boost or just blow it up :D
Yes mate love it! Front mount for sure an ecu, can't wait too see this one rip haha, gonna be amazing!😂
You needed the lights out for the Bogan Flame Thrower 🔥🤣🤣
with my turboed 1gfe i plugged the factory fuel return and installed a AN line wit fuel pressure regulator as fuel return. also i got bigger injectors with a piggy bag ecu. works perfectly and is very budget friendly should work for your rb pretty good aswell
Congratulate your boy ruddy in NZ! You should get him and Jimmy in japan for another battle in a new environment! A three way merch collab would be sick to see!
Your probably to busy with all your own plans already. Just thought it would be cool as!
Yes! Can wait to see the boost running through the bogan 32.
Did not know Mei was pregnant Congrats!!
Does the R34 5 speed trans bolt up?!
This skyline is awesome 😄😄😄
Brooooooo. Im so glad to see u do this. I Still have my Rb20e in my garage for yeeaarrrrrssssssss with a custom redone top mount RB25 turbo manifold. Never got the chance to do it. Car had an issue an a fire came so i just took it out and put in an RB20Neo aspirated engine from an R34. I then turbo charged that instead. About 4 years ago. Still rag on it hard to this day on 14psi and with the aspirated ecu on a Apexi Safc 2. So I'm glaaaddddddd to see you did something so different my guy. Enjoying the content as always from over here in Barbados.
I believe that the potential is gonna be great. Drift the belly out of it dude. Lol
the beginning montage felt like the pre race wars montage from the original fast and furious
Dang the 32 is amazing 😮
Put the air flow meter before the turbo charger then run piping. If you run it after the turbo you will run into trouble
That is so awesome glad it worked for sammit
Should get a can of ceramic coating/paint in a pressure-pack and spray the turbine housing (the hot end) with it. It will do wonders to your engine bay temps.
I did all the hot side and intercooler piping with it in my RB34 powered R33 and it's magic in keeping hot temps in or out from where it's not wanted....
The most important thing is that u will need to sand-blast the component/s and bake it in the normal oven for it to cure properly.
Hope you plan on doing fuel reg and injectors with the ecu upgrade.
Love the content. Keep it up
The bogan special mullet business up front. party out the back 🤘🤘🤘
Thank you soon much for doing this.I look forward to seeing this when it's done.
Had a mate with a vl commy 20e he added turbo and was running 11 psi safely with lite tune, some people knock the idea but a 20e+t is a lot of cheap fun
what ecu did he use?
Best Chanel going because of the regular posts and interesting content ❤
This reminds me of most New Zealanders with the 20e + turbo and the hood exit
Dude I was thinking it was going to make flames from the engine and I was right dude it's amazing
I have been looking for a solution to turbo my rb20E and couldn’t find anything thanks to you now i can replicate what you’ve done i just would like the list of parts you’ve used in the description if possible just to make it easier to just order everything but that’s just a +
The 33 is long forgotten anyway.. just take all the parts.. ecu aswell
That loading spool sounds sick launch control 😂
it is perfect and it can even get the bois in the back XD
The silver bogan mullet Ozzie spec 🤘🤘🤘🔥🤘🔥
I am so excited for the project, I really wonder what it will look like after all the needed parts are removed
I can't wait to see this on the track...
Bogan32 👍👍👌👌
Love it....
SAFC is the old school solution, wideband sensor and gauge aswell. not sure if adjustable fpr w/gauge is needed but good to add
You joke about a twin turbo project, but I kinda want to see one. I would imagine a small one for low RPM boost that gates to let a big one take over as the vacuum pressure goes higher.
Find a head spacer gasket for it to decrease the compression ratio to run the turbo setup with some more trust in it💯💯💯
Single Jingle Boom Boom
Definitely needs a manual swap, stoked to see how it'll turn out!
Good ole eBay manifolds lol on mine the bolt holes did not even line up. I had to make the holes bigger and the flange was bent, I had to put the face on a large belt sander for a while but she’s Gucci now!! Works and sounds great
YESSSS FINALY YESSSS this car really wants to live
She do be spoolin' tho! 😆👌🏼
Lmaooo I knew Sam was going to buy that turbo the moment he got his hands on it last video
Take absolutly everything you need from the 33.4! Please 🔥
Hi wht did you do tht full pump with the solder is look like you di put exsta wire on it do you mke the neg or pos strong so it can bump strong the ful pressure and give. Ore fule
Otako Garage 🇦🇺 and Team Sammit 🇯🇵✌️🤘
I'm currently building some modified bikes😉😗 all Japanese 🇯🇵 except a KTM, 5 of them are concept reversions and a GSXR street fighter, never really owned a car but did some apprenticeship work on Skylines del sols, mx5, EVO IV, 'preza etc back in '97, maddest motors otr
You should hit haltech up for some management...one Aussie helping another Aussie
The Bogan32 and a Bunnings sanga
boys n girls!
Life is Good with a SAMMIT Video!!
yesss take the piping and the intercooler from your r33.4 and put it in the BOGANNN
Bro I’ve been loving these videos lol.
Love the open mouth thumbnail man!!
Do a service on the Auto, cut a hole in the bonnet, cut some of the rear coils out and drive it down to UPGarage! For a reaction!!
And the Sh!ts n Giggles 👍
Hahaha good old Bunnings warehouse snags 😆
Compound turbo time!!!!🤣🤣🤣
It would look great on the streets at summer nats
Gotta love sammit. How he can turn one of the worst engine on a skyline the rb20e and turbo it keep doing what your doing. Seing it shoot flames thats mental.
lmao lets go sam , gotta have the science coat. lol
Use a smaller intercooler an some short piping or just no intercooler proper missile spec. Bigger injectors an a nistune ecu you will have a blast man
I would love to swap my rb20e any chance you can send me a parts breakdown but with the smaller turbo setup that fits directly to the 30 manifold
11:15 just put them inside hoodie when they are long :)
cant wait to finish my rb20e+t aswell
230hp out of that thing would be sick!!
Internet can be dangerous place for engines :D
I been following this car since josh sold it to him something tells me this car is going to be a star soon
Maybe you should ask Oka-Chan if he can reflash the ECU like he does the SR20 ones. Definitely use the intercooler set up from the 33.4,it gives you the excuse to buy better ones for it. Worst engine was the CA20e, bad head, weak rods, very gutless.
I love this series
👍👍👍👍nice NA to turbo i want to turbo the altezza 😍😍
Is this engine a single cam or double cam?
Love this series..
That single jingle will be doing a lot of jingling
Can't be a bogan 32 without a ripper skid in a maccas carpark
Just make it "twins"! Haha haha! By the way is rely fun enjoy see you build this things up~👍😎
nice nice like a drift missle but street family to go for grocery and family :D
Love it dazza spec all the way
Great Vid Sam! ❤
surely that other turbo's for jimmy and his rx7 ?