I had a na 20e out of a a31 in my old C35 laurel missile ran it on 98 or 100 octane and it would get 3rd and 4th gear on a wet pad was always getting asked if it was 30e with how well it ran the 20e is the highest compression engine of the RB family so they love the higher octane
I'd say go for the build. This would benefit so many people including me because alot of people get rid of the RB20E and it has so much hidden potential that's not explored fully.
Single cams are known to spool better. Also old single cam 2 valve engines are typically low VE engines, they like smaller turbine &housing. Other tips- the valve springs will probably be your first restrictions. If the bottom end is keep power low till higher rpms.(keep timing very conservative until past peak torque then ramp the timing in) this is how stock 2jz hold 1000hp. They keep torque down@lower rpm with low timing and low.boost. Yes! Link ecu it. You are correct on the harness and distributor wheel. We use same cas wheel on the z31.
You have to dive into the rabbit hole. It will eat at you if you didn't. Even if the results aren't what you were expecting, at least you satisfied your curiosity and provided everyone else information that can be built upon. Sounds like nothing but wins all around.
that sound is amazing awesome vid bro, I got the "all I want for christmas is car parts" sweater and the quality is off the charts, awesome work with those too, keep up the awesome work.
Stop it sam 🤣 your giving me way to many ideas for my RB20E 😋🤘 I'm so loving the Bogan mobile so keep going it sounds so nice, definitely a unique sounding engine 👌💕💯
Holy Crap! So crazy to see my Axial project (20:14) that I worked shown in a video in Japan on one of my favorite UA-cam Channels LOL. I work for Axial and created that SCX10 III and many others that they showed you. Super cool!
The Bogan 32 series is awesome. I can't wait to see what happens with the build and when SAMMIT gets it to the track. I hope he has or will get a couple more of those engines to replace the one in the car when it goes kaboom !!!! Gaya Factory is very dangerous for the bank account. I also hope SAMMIT does more content with them in the future.
What really shows in the sim, is the alignment of the car. Sam's chaser and S15 have a lot more caster (self steer), whereas here you can see he has to "work" the wheel a lot more to keep it in slide. Maybe thats intentional, really using the sim as a workout to train yourself, muscles and stamina.
Awesome video as always Sammit. I've been rewatching your videos from the very start of your Channel. To get ready for coming to Japan. Thanks for all your hard work.
Yes, u can, I have an RB20E and I am and auto electrician, I was thinking of using a RB25 NEO harness & ECU on it, just have to use the Neo 25 injectors and rail will just have to modify the bolt up & run coilpacks on the plugs or if the plugs are to far down i’ll mount the coils and use the plug wires.
Fold the return fuel line a bit where it comes out of fuel rail and cable tie it so it’s folded with build a bit more fuel pressure making it run a bit richer it’s a little something we’ve learnt after playing with rbs for years haha
Yes to everything you said about building the engine in it. That idea sounds sick!! That would also be really fun to watch, you building it into an Ebisu missile.
Sam the mad scientist !.In all seriousness doing stuff like this is how the tech we know was first developed .Thomas Edisen said "invention starts with a pile of junk ".
IF you get a speeduino ECU work on that you have a super budget build. you can get a ECU to work for 150$ you might get lower if you go in for it. btw a lot of the "low cost" ECU's is based on speeduino.
I think it's the na compression ratio that gets u good response. Yeah go all out with the $$$.. na to turbo conversions give u that unique ride so it's worth it.
Yo, Gaya Factory looks legit, they're rocking Simucube and Moza racing wheel bases. Lots of good wicked setup going on there! I'm also into sim drifting as well
the rb20 is like the rb30 so alot of rb30 info will work with it and alot of parts also and they do breath well. hit up the aussies and kiwi's for info. i had a rb30 single in a aussie skyline just head work and a cam,cometic head gasket, stock bottom end and a to4z rb20 det injectors and a haltec ecu and was doing 300 hp atw @12 psi. heaps of torque and full boost by 2000rpm.
Lengthen out the MAF a bit its too close to the intake of the turbo that is why it shuts off when it comes down to idle, the big turbo is still sucking air at zero TPS and it dumps excessive fuel in the cylinder and floods it.
It’s so strange to me hearing people being surprised by the RB20, my mate has an RB20DET in his R31 Skyline and it has about 400hp, they’re just a super responsive RB and they get down, he’s running his with a haltech also, there’s so much potential out of RB20’s and I can’t believe more people aren’t into them. This is is Australia by the way.
I think this motor isn't so popular that's why people haven't find a way to make them reliable . The best example is the rotary ... In the recent years there is so many breakthrough that make them reliable .
I think you should polish that silver paint right up and drop it to the floor rock hard suspension, some wicked 90s alloys and use it as a family saloon, boosted to the max 😂
i think you should do it right, single cams and smaller displacement rev faster. im from puerto rico we never got that engine so the first time i hear about this engine was in this channel so it’s interesting to see and hear it, it sounds badass
Loads of kiwis have done this to single jingles. It was dubbed the pre det grenade. Pull the pin, send it and chuck a det in there when it melts down 😂
I think it would be super interesting building the R32 single jingle and see what it can handle.
I think it would be super interesting building the R32 single jingle and see what it can handle..
I second this!
My mate has his RB20DET in his 31, it’s running off a Haltech and is at about 400-450hp
@@loosygoosyy lmao 💀
I had a na 20e out of a a31 in my old C35 laurel missile ran it on 98 or 100 octane and it would get 3rd and 4th gear on a wet pad was always getting asked if it was 30e with how well it ran the 20e is the highest compression engine of the RB family so they love the higher octane
I'd say go for the build. This would benefit so many people including me because alot of people get rid of the RB20E and it has so much hidden potential that's not explored fully.
All Sam needs now is tractor flap for it lol 😀
Yeah definitely put a clapper on it 😁👍🏻
Hearing the single jingle scream really peaks my interest as well. I believe you have the means to make it happen. Thank you Sam!!
Single cams are known to spool better. Also old single cam 2 valve engines are typically low VE engines, they like smaller turbine &housing.
Other tips- the valve springs will probably be your first restrictions.
If the bottom end is keep power low till higher rpms.(keep timing very conservative until past peak torque then ramp the timing in) this is how stock 2jz hold 1000hp. They keep torque down@lower rpm with low timing and low.boost.
Yes! Link ecu it.
You are correct on the harness and distributor wheel. We use same cas wheel on the z31.
I've been watching GAYA FACTORY for a long time. It's nice to see some of my other favorite UA-camrs work with them!
Definitely worth looking into what this engine can take!
Also make sure to include all the SIM stuff in the vlogs, super into sim rigs!
That's so HILARIOUS I ALSO wasn't even looking AT AFR'S I was too busy checking the boost gauge
Batter up!, Great job on the custom turbo kit. This is one of my favorite videos you have done. Glad to see you having fun🔥
You have to dive into the rabbit hole. It will eat at you if you didn't. Even if the results aren't what you were expecting, at least you satisfied your curiosity and provided everyone else information that can be built upon. Sounds like nothing but wins all around.
GAYA FACTORY is siiicckkk! so cool that they have so many sims
that sound is amazing awesome vid bro, I got the "all I want for christmas is car parts" sweater and the quality is off the charts, awesome work with those too, keep up the awesome work.
Mayor Frankenstein vibes “ it’s alive” 😂
Stop it sam 🤣 your giving me way to many ideas for my RB20E 😋🤘 I'm so loving the Bogan mobile so keep going it sounds so nice, definitely a unique sounding engine 👌💕💯
Holy Crap! So crazy to see my Axial project (20:14) that I worked shown in a video in Japan on one of my favorite UA-cam Channels LOL. I work for Axial and created that SCX10 III and many others that they showed you. Super cool!
I love to see Sam ruminating over the RB20. IT certainly looks like a very promising project and more VR/simulator practise would be awesome
This is why i love your stuff Sam, some of these experimental madness moments feel like the kind of sh*t i'd do
The Bogan 32 series is awesome. I can't wait to see what happens with the build and when SAMMIT gets it to the track. I hope he has or will get a couple more of those engines to replace the one in the car when it goes kaboom !!!! Gaya Factory is very dangerous for the bank account. I also hope SAMMIT does more content with them in the future.
What really shows in the sim, is the alignment of the car.
Sam's chaser and S15 have a lot more caster (self steer), whereas here you can see he has to "work" the wheel a lot more to keep it in slide. Maybe thats intentional, really using the sim as a workout to train yourself, muscles and stamina.
Loving this series Sam, keep it 'up. Fascinated to see what this makes with a Link, proper intercooler etc
Awesome video as always Sammit. I've been rewatching your videos from the very start of your Channel. To get ready for coming to Japan. Thanks for all your hard work.
Yessss a sammit video dude this car really wants to live every thing works on him and there is no rusy
you can use the distributor to read engine timing in order to fire the coils/injectors with a standalone. We do something like this on KA24DE's.
Yes, u can, I have an RB20E and I am and auto electrician, I was thinking of using a RB25 NEO harness & ECU on it, just have to use the Neo 25 injectors and rail will just have to modify the bolt up & run coilpacks on the plugs or if the plugs are to far down i’ll mount the coils and use the plug wires.
Fold the return fuel line a bit where it comes out of fuel rail and cable tie it so it’s folded with build a bit more fuel pressure making it run a bit richer it’s a little something we’ve learnt after playing with rbs for years haha
For a bogan r32, the panels all line up better than most R32s here xD Looks like fun!
im interested in the 32 build as well but a dyno run on the bogan set up would be interesting to say the least
I don’t think Sam realizes how expensive kids are.
Yes to everything you said about building the engine in it. That idea sounds sick!! That would also be really fun to watch, you building it into an Ebisu missile.
ABSOLUTELY GO FOR IT!!!
Flash back to when may said “it’s soo quite, I didn’t know a skyline could be that quite” 😂😂
Never mind Ford doing the 1.0 eco boost. Sam coming in clutch with the BoganBoost.
Sammit, RB20E block = RB20DET block!!!!! Same size pistons same size conrods! You can use rb20det injectors and rb25 turbo on!
definietly go all out with the R32 build!
Haven’t even got to the end but bro it sounds so good!! This is wicked
Sammit will be the one that frees us from the people on the forums that always say: "rather buy an RB25"
Dont sleep on the single jingle
Sam the mad scientist !.In all seriousness doing stuff like this is how the tech we know was first developed .Thomas Edisen said "invention starts with a pile of junk ".
Let the single jingle sing💥💥🔥🔥🔥
ayyyyy snow!!!!! Looks like home, heres been snowing past 2 days shit tons of snow!! Good weather to drift around 😂 Cheers from Finland!
I want all of the Bogan Build!!! Loving these videos!
I remember when Sam won is first drift event and he said the pros are now drifting and after 3 years Sam has become a pro drifter
IF you get a speeduino ECU work on that you have a super budget build. you can get a ECU to work for 150$ you might get lower if you go in for it. btw a lot of the "low cost" ECU's is based on speeduino.
Yes single jingle needs a link
I think this man just made a breakthrough in the industry again
Sam's going to raise the prices of single jingle engines like Adam did with blitz
Yes go down that rabbit hole sam let’s see the next gen rb30 builds
DO IT SAM! I love this content, keep it REET!
That piping is so ebisu style, i love it 🎉🎉
To be honest, I was mostly enjoying that RB soundtrack 🤤 xD. Very cool video Sam!
definitely please build it i wanna see this more
I think it's the na compression ratio that gets u good response. Yeah go all out with the $$$.. na to turbo conversions give u that unique ride so it's worth it.
Should have put the turbo on the other way round and put the exhaust out the front so inlet lines up.
Glad you included the snow that was cool 🤙🏼
Dude this thing sounds sick!
That gaya factory looks like so much fun. Makes me want to build a driving sim
yes single jingle deserves the luv
Hey man
Dodgy solution but for testing purposes.
I have done multigrip clamps on the fuel line to raise fuel pressure and make them run richer
it's fun when ppl talk about a "snow day" here i tis the "snow season" ;) like month and month. if you have a car with winter tires on your fine.
Yo, Gaya Factory looks legit, they're rocking Simucube and Moza racing wheel bases. Lots of good wicked setup going on there! I'm also into sim drifting as well
The shop needs a sammit mural
I'm an Audi 10VT guy so I am all for seeing a single cam JDM!
Not sure why anyone is surprised. The single cam platform is still huge in australia. Pretty sure they have cracked 1800hp with the RB30
This skyline needs to be named Frank like "Frankenstein"
the rb20 is like the rb30 so alot of rb30 info will work with it and alot of parts also and they do breath well.
hit up the aussies and kiwi's for info. i had a rb30 single in a aussie skyline just head work and a cam,cometic head gasket, stock bottom end and a to4z rb20 det injectors and a haltec ecu and was doing 300 hp atw @12 psi. heaps of torque and full boost by 2000rpm.
when you see your neighbours stock r32 every morning and an old lady hopping in it "thinking thinking"
This is literally the W of the year
Lengthen out the MAF a bit its too close to the intake of the turbo that is why it shuts off when it comes down to idle, the big turbo is still sucking air at zero TPS and it dumps excessive fuel in the cylinder and floods it.
This week on top bogan expect a pinch of "she's a bit how ya goin" and a dash of "she'll be 'roight" 🤣
The apprentice of the SR GOD gonna be a RB single jingle GOD 🤣
Get a 30e FFP for it clean the engine bay up and make a super nice 20et build
YES! one of those smaller intercoolers out the hood between the headlights would be sick for a missile
I mean like you should do a VL spec intercooler, little crooked in the front bumper in danger of dragging on the ground
This video was epic, can’t wait to see the 32 rip. Keep up the good work 👍
It’s so strange to me hearing people being surprised by the RB20, my mate has an RB20DET in his R31 Skyline and it has about 400hp, they’re just a super responsive RB and they get down, he’s running his with a haltech also, there’s so much potential out of RB20’s and I can’t believe more people aren’t into them. This is is Australia by the way.
It's a RB20E, everybody knows the RB20DET and super responsive RB = the least responsive of the RB engines.
Go for it!!! Build it!!
Baby Sammit in the oven is going “WTH IS GOING ON OUT THERE???”
I think this motor isn't so popular that's why people haven't find a way to make them reliable . The best example is the rotary ... In the recent years there is so many breakthrough that make them reliable .
I think you should polish that silver paint right up and drop it to the floor rock hard suspension, some wicked 90s alloys and use it as a family saloon, boosted to the max 😂
Next time on sammit.............
Can't wait to see you try the harness!
i think you should do it right, single cams and smaller displacement rev faster. im from puerto rico we never got that engine so the first time i hear about this engine was in this channel so it’s interesting to see and hear it, it sounds badass
Would love to see this built!
05:20 story of my life 😅
The sound is absouloutle top!
Sam needs to get a drift simulator so in the off season he can practice when he is not working in his shop
Clock the turbo or run the pipe around the back.t Top mount intercooler then in.
DO IT! i really want to see the bogan 32 done right
such a bad ass studio!!
Please go down the Single Jingle rabbit hole! I love this bogan mobile content. Let's do it!
Rabbit hole time guy, let's see a single jingle make some power
I think you need to go down that rabbit hole and go all out and be the bogan you want to be
Go for it... do the build.. !! ✨🤸♂🤸♂✨
use the VL holden plug n play link an repin stuff to work
Keep going with it! All of it has already been too easy to not keep going!!!
lets gooooo another sammit video this is gonna be a banger vid
R35 coil conversion kit !!
That’s what I’m using my turbo Rb30 r31
I like the idea to built rb20 gtst. I really want to learned rb20.
i think you should build that badass single jingle
Loads of kiwis have done this to single jingles. It was dubbed the pre det grenade. Pull the pin, send it and chuck a det in there when it melts down 😂
27:35 virtual baby in the back seat. ^____-