You are the best man.. Like from Tanzania. If this horizontal piston is possible to make make into a v twin then let us think through if we can make a flat twin probably from a single vertical piston..😎
From 2 cylinder then 3 cylinder and now a v-twin engine. No doubt, you can also build a inline 4 or cross plane engines. You're a real master. UA-cam creators should normalize this kind of content. Greetings from Philippines where motorcycle are discriminated. Keep it up Master! 💪
yes you are right master in copy cat, this engines is actually creation of ENGINE TARO a Japanese channel, this guy is just make copy, the creator is unrecognised, why the actual peoples always stay unidentified
yes oil pump sucks, but concept is from taro, oil pump modifications is not big deal, m very sad about taro,really even he have to give taro some credit.why people always try to show fake superiority. the idea and concept is the main point, there are so many people already made v twin l twin engines, but they are just stayed unkown,
Dân Nam Kỳ mà bạn. Dân Nam Kỳ mà có môi trường thích hợp là còn sáng tạo khủng khiếp hơn nữa. Như thằng em này mà được ra nước ngoài học tập thì nó còn kinh khủng hơn gấp trăm lần.
When my dad was alive he collected older Hondas, Yamahas and Suzukis that were in this date range.. He probably would've paid like $8000 for this bike. 1 off collector piece.. he would hav showed this thing all over the US. Nice work Dan, very nice work man.
I can not let this pass without a word of congratulations. What you did here is a great achievement worthy of my respect. I am quick to criticize things done wrong without looking at a work by its result. In this event I have no criticism of anything you did to change this into a one of a kind motorcycle. It made me suspect you have some academic skills in engineering? At the five minute mark, the beer I opened when you started was empty as I sat transfixed by the process. That is some big time distraction you had going on there. My beer was meant to last half an hour! Well i enjoyed watching the whole picture and tell you that is one fine achievement, fella! Be proud. You have earned a deserved level of admiration.
We have manufactured a large number of motorcycle engines in Japan for many years (^. ^) I am riding a 90 degree V-twin Magna 250 ... Thank you for taking a picture of the modification in detail. .. Change the oil and wear protective equipment. Please drive safely.
Honda already built a v twin motor like this. Its called the CX motor platform. They built them from 1978-1985. Was put on the CX500 and the GL500 silverwing. So not the motor of the future. But a homemade blast from the past. Still did a great job.
That's incredible a guy can make a engine in his shop . But aren't there 2 cylinders now on small sport bikes ? That exhaust though , it reminds me of bubbles popping haha . And it seems slow to rev , as if its starving for gas a little.
Really amazing work you did on this little bike. I had to watch the whole thing to see how it converted to twin from a straightforward single. I bet the power output has increased significantly. Looks great as a v-twin Bevel drive.
Amazing, when a lot of people cannot put a jigsaw together without the picture, this guy has made an amazing engine without instructions (a fair amount of knowledge through) to watch it was almost majestic or poetic, with the basic of engineering tools he knocks it out the park! Sounds alright too! Allen Millyard of the far east, I salute you!!!
You have to be a genius just to imagine this engine, let alone machine it all out. Great job! Very strange sound on the little watch winder motor. Balance? You don't have to worry about parts......you just make them!!
This whole thing is just phenomenal 🤯 I am mechanically minded and very practical but I am even blown away at the sheer skill and talent this guy has 😵 Can you imagine this guy being given a job to build a car for the future! 2500 hear we come 🤓😝
Repent to Jesus Christ! “For it is by grace you have been saved, through faith-and this is not from yourselves, it is the gift of God- not by works, so that no one can boast.” Ephesians 2:8-9 NIV h
Wow I'm just blown away every time you do one of these from spare/scrap parts! The skill you have to see the end product and just build it is simply amazing! Absolutely loved watching you do these and can't wait for the next one! I'm thinking you try and do a six-cylinder! Or possibly double it up and do a V4?
You guys machining capabilities are amazing I don't know if that's a really good engine good idea but the fact that you did it and it works it's amazing
toàn thấy người nước ngoài vào khen thôi..người vn k b h công nhận người có tài..em rất thích những sáng chế của a.với những máy móc đơn giản như v mà làm ra được những cổ máy qa tuyệt vời.Việt Nam ít ai lam đc như a.chúc a càng ngày càng phát triển.mong 1 ngày nào đó được giao lưu với a. Việt Nam 🇻🇳 mãi đỉnh😊😊😊
đặc biệt vì bên nước Anh có tên là Allen Millyard cũng độ xe kiểu như bác này, chỉ là ở đẳng cấp khác thôi nên ngta mới biết kiểu độ xe nhiều xilanh này hơn
I like the bevel drive to crosshaft, to keep all of the transmission in original layout. Nice, imaginative, saves a lot of hassle. Respect for your skills. 🖖😎
Nice to see old fashioned human skills and labor at work instead of a modern computerised robot.Also was impressed with piston fitting and no piston ring compressor,..well done.
WOW! A 90 degree v-twin motor! I can see this is the engine of the future! I wonder why nobody ever thought of it before! And mounted longitudinally just like a V8 in a Corvette. A genius like this will solve the problem of square pistons so all the thrust can be totally mitigated... Maybe using Teflon cylinder walls! lol
Theo dõi bạn từ những ngày ở kênh cũ. Mình nói thật một thợ máy bình thường như bạn đang tạo ra những động cơ mà ngay cả những người được học hành tử tế còn chưa làm được. Mình thấy có những người nước ngoài vô đây comment nói là mấy cái này ở nhật ở thái họ làm được từ lâu rồi, mình rất bức xúc. Ở đâu chứ riêng việt nam mình chẳng mấy ai làm được như bạn. Chúc bạn nhiều sức khỏe và ngày càng thành công với đam mê nhé!
Thấy bạn làm nhiều động cơ độc lạ hay quá, nể sự sáng tạo của bạn quá. Nếu đc bạn nghiên cứu cải tiến lại bộ nồi để đáp ứng đc công suất tăng lên gấp đôi. Kèm theo đó tối ưu tỷ số truyền nữa là ok. Bạn mà ở các nước cho phép đăng ký sáng chế nữa thì đúng là vô địch 😃
I don't know that it's the engine of the future for everyone, but it is for you. Good job. Remaking engines have been done almost since engines have been made. They have cut them in half lengthwise, across the middle sideways, and even put two inline 4s together to make v8s, mainly as race engines. It take a certain skill and you have it.
I believe in alot of asian countries this engine is mass produced for different mopeds, so this would be a big deal in the after market scene of said mopeds.
beautiful work very perfect , congratulations to this project , the only thing missing was to put the dynamometer beforehand and after it was finished , put it back to see how the engine turned out in power and cavalry , congratulations more than a hug from the Brazilian people here in Brazil
Absolutely awesome! I will note on the bearing you machined on the circle adapter. Tolerances might be too loose. You should have to Freeze the bearing and heat the casing to slide them in. Otherwise they may spin. Exhaust note sounds AWESOME!
Exactly what I thought! (I'm a precision machinist) for sure he's going to have issues with that bearing not being a tighter fit. Impressive work though with what the guy has to work with 👍
I have to be honest with you, I find your skills and ability to create such interesting one off engines absolutely mind blowing, I would just love to know what inspires you to do these projects?
Probably inspired by this guy. Who is the master of this sort of thing :-) ua-cam.com/video/aTyUMgTWNv0/v-deo.html ua-cam.com/video/sjxiHLZdSGw/v-deo.html ua-cam.com/video/FnXUx4cYdHA/v-deo.html
Sounds good for a 206cc garage bike! The Honda CX twin was a great idea(had this same engine layout) that never really caught on for whatever reason. I loved my Dad's CX-650 Turbo, altho I think the novelty of it being a turbo was just what made it cool for me. These are V-twins, in every sense of the was a twin works, but they still look strange because of what we've been conditioned to see as "cool".
Really brilliant work. The motor seems really great. Before I got to the ride part of the video I was worried that ergonomics were going to a problem with one's knees and shins hitting the motor and air intake. You could move the seat back-wards and make the handle bar positioned back to accommodate the seat being moved back. Might require different handlebars.
what a genius !!! I can't imagine how you've done such a complex engine from the design, fabrication, assembly and tuning all by yourself. very unique and I think this is the first of its kind. The possibilities are endless because your such a gifted and talented person. Maybe I will watch in the future a 12 cylinder v-type "LE DAN" motorcycle engine. New subscriber here.
@@uhtred7860 Was about to mention this brilliant guy too. Nothing he does is comprehensible to a normal person, and he goes like "I just take my hacksaw.." 😂
The CX500 and especially the 650 should have never been killed off. I want to like guzzies but I've never been a fan of air cooled twins. Awesome project by the way. That sounds amazing.
Yeah I can definitely see myself building stuff out of this world if I had the equipment to do it also!! But glad to see someone else with the same outlook and capable of doing things like that and please pass the knowledge on!!! Great build!!
@@thra5herxb12s well apparently you didn't read the comment? I said I could see myself building things like that or just amazing stuff if I had the equipment to do it! Wasn't a contest I was glad to see other people even interested in this kind of work! But thanks for the comment.
Only concerns i had with this build was timing and oil feed, thank you for spending the time to show us the oil journals and such. Wouldn’t be too much to make an add on and a new shaft to make a v-4 now would it! (Hint Hint) 😉
You can watch part 1 again, don't forget to leave a comment
ua-cam.com/video/LNOg8thdOUU/v-deo.html
siêu thật. nhưng 2 máy thì nhông số có chịu ở tốc độ cao ko?
You are the best man.. Like from Tanzania. If this horizontal piston is possible to make make into a v twin then let us think through if we can make a flat twin probably from a single vertical piston..😎
@@kthop604 này làm cafê độc lạ thôi, chứ nó có chạy dc nhiu đâu 🤣
@@kthop604 q
a thêm dự án máy rotary nữa thì tuyệt vời
From 2 cylinder then 3 cylinder and now a v-twin engine. No doubt, you can also build a inline 4 or cross plane engines. You're a real master. UA-cam creators should normalize this kind of content. Greetings from Philippines where motorcycle are discriminated. Keep it up Master! 💪
Like kak.
yes you are right master in copy cat, this engines is actually creation of ENGINE TARO a Japanese channel, this guy is just make copy, the creator is unrecognised, why the actual peoples always stay unidentified
@@technobuddy6604 no copy man :))) the oil pump is better that engine ,u see engine taro comment :)))
@@technobuddy6604 the oil ways of engine taro suck :)))
yes oil pump sucks, but concept is from taro, oil pump modifications is not big deal, m very sad about taro,really even he have to give taro some credit.why people always try to show fake superiority. the idea and concept is the main point, there are so many people already made v twin l twin engines, but they are just stayed unkown,
Beautiful looking bike. testament to the hard work put into the project. Allen Millyard would be proud of this.
Yes, wonderful ability and skills here. Its like a mini Moto-Guzzi👍👍👍very cool after all that hard work and thought.
Theirs not many motorcycle owners that reserve such comprehensive skill as this dude much respect brother
Allen Millyard
The motor sounds great. And has pull.
😂
He's an engineer, not just a motorcycle owner.
but motorbikers or still workers wearing flip flops are very hilarious
What a talented engineer.
Love that twin V sound on that tiny bike.
Kênh cơ khí sáng tạo nhất của người việt về máy móc mà t từng xem :)
Đỉnh
Đỉnh vl, h ra thêm con 2 đầu lòng 4 val máy nước nữa là thầy luôn :vvv
Toàn người nước ngoài vào khen đỉnh thật, nếu bật quảng cáo thu nhập gấp 3 4 lần các kênh khác
Thanh Nguyen sao bạn này k bật nhỉ
@@thieptran7529 Có bật chứ làm gì không có.
Dân Nam Kỳ mà bạn. Dân Nam Kỳ mà có môi trường thích hợp là còn sáng tạo khủng khiếp hơn nữa. Như thằng em này mà được ra nước ngoài học tập thì nó còn kinh khủng hơn gấp trăm lần.
Việc xử lý đường dầu rất tuyệt vời.
Chúng tôi sẽ coi nó như một tài liệu tham khảo.
bạn này làm trước nhỉ, đường nhớt chưa tối ưu như Dan
このタイプのエンジンを最初に作ったのはあなたのようですね。
Giỏi thật đấy bn
Sounds like a mini cx500, guaranteed you copied the cycles, and divided the bore and stroke, glad your happy with what you got out of it. 👍
Brilliant, it sounds like a small Moto Guzzi. As a Guzzi owner I would so love to ride this, nice job.
my hat off for all your engines , you make them look so easy, but we know how much it takes, thank you very much for sharing them with us
When my dad was alive he collected older Hondas, Yamahas and Suzukis that were in this date range.. He probably would've paid like $8000 for this bike. 1 off collector piece.. he would hav showed this thing all over the US. Nice work Dan, very nice work man.
I can not let this pass without a word of congratulations. What you did here is a great achievement worthy of my respect. I am quick to criticize things done wrong without looking at a work by its result. In this event I have no criticism of anything you did to change this into a one of a kind motorcycle. It made me suspect you have some academic skills in engineering? At the five minute mark, the beer I opened when you started was empty as I sat transfixed by the process. That is some big time distraction you had going on there. My beer was meant to last half an hour! Well i enjoyed watching the whole picture and tell you that is one fine achievement, fella! Be proud. You have earned a deserved level of admiration.
We have manufactured a large number of motorcycle engines in Japan for many years (^. ^) I am riding a 90 degree V-twin Magna 250 ... Thank you for taking a picture of the modification in detail.
.. Change the oil and wear protective equipment. Please drive safely.
Honda already built a v twin motor like this. Its called the CX motor platform. They built them from 1978-1985. Was put on the CX500 and the GL500 silverwing. So not the motor of the future. But a homemade blast from the past. Still did a great job.
My first motorcycle was a 1978 CX500. It was one of the best bikes I've ever owned. o7
They also built a turbo and a 650 version of the same engine.
@@SixPackDan Yes, and they were awesome!
I've got an 85 CX650.
That's incredible a guy can make a engine in his shop .
But aren't there 2 cylinders now on small sport bikes ?
That exhaust though , it reminds me of bubbles popping haha . And it seems slow to rev , as if its starving for gas a little.
Really amazing work you did on this little bike. I had to watch the whole thing to see how it converted to twin from a straightforward single. I bet the power output has increased significantly. Looks great as a v-twin Bevel drive.
👋👋👋... a home-made engine using pretty rudimentary tooling... FANTASTIC! Love the "loose tolerances", too! Well done, great job 🙂
That’s what I call custom bike, a master piece of engineering, fine and very skilled work, great job!
Amazing, when a lot of people cannot put a jigsaw together without the picture, this guy has made an amazing engine without instructions (a fair amount of knowledge through) to watch it was almost majestic or poetic, with the basic of engineering tools he knocks it out the park! Sounds alright too!
Allen Millyard of the far east, I salute you!!!
Incredible! Seriously, you must have a master's degree in mechanical engineering.
You have to be a genius just to imagine this engine, let alone machine it all out. Great job! Very strange sound on the little watch winder motor. Balance? You don't have to worry about parts......you just make them!!
You're a crazy sob. Congratulations! I can't imagine the satisfaction of completing such a cracked project!
I enjoyed watching. I like the way you built the intake manifolds and exhaust. Very clever. Respect from Australia. 🇦🇺
This whole thing is just phenomenal 🤯
I am mechanically minded and very practical but I am even blown away at the sheer skill and talent this guy has 😵
Can you imagine this guy being given a job to build a car for the future! 2500 hear we come 🤓😝
That was incredible! Couldn’t stop watching it until the very end! Well done…👏🏼🙌🤘🏼💪🏼
Pointless, possibly a sign of insanity and absolutely brilliant. Well done. I love it.
Love how you even use chain sprockets and belt pulleys as clamping tools.
This man is using his brain on a different level
That is insanely impressive!! I’m in engineering and this is mind blowing the work youve done
It's amazing how successful and creative this is. And what I'm impressed with is that you use a branded Thailand exhaust pipe. ❤️❤️
Big Fan Bro Big Fan♥️
This is a masterpiece. Congratulation from Vietnam.😉👍🍺
Repent to Jesus Christ!
“For it is by grace you have been saved, through faith-and this is not from yourselves, it is the gift of God- not by works, so that no one can boast.”
Ephesians 2:8-9 NIV
h
This is right up there with the English guy, Allen Millyard!
Genius work!
Salute to you from 🇺🇸 USA!
Wow dude, like wtf. That’s just insanely pure awesomeness to have those metals right there. That’s so cool!
Definitely one of the coolest retrofits I've ever watched and I've seen many these days too
one of the best and resourceful mechanics! I am thrilled and envy this person!
Like y
Phục...đẳng cấp đỉnh cao của công nghệ chế tạo,,chúc anh thành công trên con đường của mình
This is so cool.
The tools are awesome. You can build great stuff.
The skills are even more amazing.
Fantastic!!. Le Dan's creativity + skills, know NO limits!!..
Many congrats to a brilliant engineer!!.
🤗🙏🙏🙏
I do not have enough words to congratulate you on the work you have done! The sound of the engine is impressive! And it was also very nice!
This zhould be voted international cafe racer bike of the year! Brilliant work mate...
Wow I'm just blown away every time you do one of these from spare/scrap parts! The skill you have to see the end product and just build it is simply amazing! Absolutely loved watching you do these and can't wait for the next one! I'm thinking you try and do a six-cylinder! Or possibly double it up and do a V4?
It’s exactly how Harley Davidson would have done it in the very beginning.
ua-cam.com/channels/OalnlZMgGjyfOYfNfSVz-Q.html check account :D
You guys machining capabilities are amazing I don't know if that's a really good engine good idea but the fact that you did it and it works it's amazing
toàn thấy người nước ngoài vào khen thôi..người vn k b h công nhận người có tài..em rất thích những sáng chế của a.với những máy móc đơn giản như v mà làm ra được những cổ máy qa tuyệt vời.Việt Nam ít ai lam đc như a.chúc a càng ngày càng phát triển.mong 1 ngày nào đó được giao lưu với a. Việt Nam 🇻🇳 mãi đỉnh😊😊😊
Không phải người việt mình không công nhận mà ít người Việt xem đó bạn, người nước ngoài họ rất quan tâm đến máy móc, họ rất yêu thích.
đặc biệt vì bên nước Anh có tên là Allen Millyard cũng độ xe kiểu như bác này, chỉ là ở đẳng cấp khác thôi
nên ngta mới biết kiểu độ xe nhiều xilanh này hơn
Great build , shows great craftmanship.
Love to see more projects.
I like the bevel drive to crosshaft, to keep all of the transmission in original layout. Nice, imaginative, saves a lot of hassle.
Respect for your skills.
🖖😎
I really like that. The style of the bike looks great too. We'll done! Sounds good too!
Nice to see old fashioned human skills and labor at work instead of a modern computerised robot.Also was impressed with piston fitting and no piston ring compressor,..well done.
The highest complements maestro. You are so talented...
Sounds like a twingle.
Amazing build!
WOW! A 90 degree v-twin motor! I can see this is the engine of the future! I wonder why nobody ever thought of it before! And mounted longitudinally just like a V8 in a Corvette.
A genius like this will solve the problem of square pistons so all the thrust can be totally mitigated... Maybe using Teflon cylinder walls! lol
Reinventing the past
THE WORK OF A TRUE MASTER. THAT SOUND FASCINATES ME - BEAUTIFUL. THANKS FOR THE VIDEO.
Wow, loving your videos. Looking forward to the next build. I find your videos so relaxing , entertaining and educational to watch. Thank you.
I’ve been looking for such a project from quite some time. Very satisfying to see the build and the sound is sweet!
That's something to be proud of. You inspire me. Thanks for sharing your video, wish you well.
Bạn này giỏi thật sự !
Những tài năng như bạn cần được Trọng dụng, đặt đúng chổ để ngành công nghiệp nước nhà càng thêm phát triển
Theo dõi bạn từ những ngày ở kênh cũ. Mình nói thật một thợ máy bình thường như bạn đang tạo ra những động cơ mà ngay cả những người được học hành tử tế còn chưa làm được. Mình thấy có những người nước ngoài vô đây comment nói là mấy cái này ở nhật ở thái họ làm được từ lâu rồi, mình rất bức xúc. Ở đâu chứ riêng việt nam mình chẳng mấy ai làm được như bạn. Chúc bạn nhiều sức khỏe và ngày càng thành công với đam mê nhé!
Bạn nói rất đúng, cho dù người khác làm rồi, mình làm nữa k dc sao, nếu nói như vậy thì trên thế giới này chất chỉ có 1 tiệm phở
Chuẩn men
@@Le_Dan Bạn thực sự là Edison của Việt Nam ! Chúc bạn sức khỏe và luôn giữ được đam mê !
@@minhdole cảm ơn bạn rất nhiều, chúc bạn ngày tốt lành
Amazing machine!! Running so smooth ❤️
That was godly build, dude build most of it from scratch. When apocalypse happen I'd love to follow him
Đỉnh vãi...xem anh gia công mà đã con mắt..ko rời mắt khỏi video một giây nào
Thấy bạn làm nhiều động cơ độc lạ hay quá, nể sự sáng tạo của bạn quá.
Nếu đc bạn nghiên cứu cải tiến lại bộ nồi để đáp ứng đc công suất tăng lên gấp đôi. Kèm theo đó tối ưu tỷ số truyền nữa là ok.
Bạn mà ở các nước cho phép đăng ký sáng chế nữa thì đúng là vô địch 😃
This guy builds his own Moto Guzzi. Amazing! 🔥🔥🔥
Big respect man, nice build 👊🏾💯😎🔥
Much respect from Canada on your ingenuity and craftsmanship!
I don't know that it's the engine of the future for everyone, but it is for you. Good job. Remaking engines have been done almost since engines have been made. They have cut them in half lengthwise, across the middle sideways, and even put two inline 4s together to make v8s, mainly as race engines. It take a certain skill and you have it.
I believe in alot of asian countries this engine is mass produced for different mopeds, so this would be a big deal in the after market scene of said mopeds.
Brilliant ! ...full credit to the engine builder,seriously, not an easy job as much work and time has gone into this..well done !
งานสร้างสุดยอดเสียงมันจะเหมือน ดูคาติเลยครับ สุดยอด
10/10 excellent sound.
I would buy one of these if given the chance. It looks and sounded so clean for a DIY. Btw you're videos keep getting better and better!
I want one too
Now this is what I call a content ❣️
my name is Ayhan
I am from turkey
I enjoy watching what you do.
you are doing great job
I wish you success 👋👋👍
This is impressive. It's work as ambitious as Allen Millyard's, done with considerably more basic tools.
This man should start his own company ASAP, and will have trillions of dollars. Great work.
Here we are from all over the world and everyone is as family . We are all a lot closer than people think .
I like the music. I'd love to ride it.
What a fantastic pice of craftsmanship. Well done Yong lad.
beautiful work very perfect , congratulations to this project , the only thing missing was to put the dynamometer beforehand and after it was finished , put it back to see how the engine turned out in power and cavalry , congratulations more than a hug from the Brazilian people here in Brazil
Ko
l
Plp
)
pppo
lkkm
O
l
L
P
P
ua-cam.com/video/dLkWMnxAnWs/v-deo.html
Absolutely awesome! I will note on the bearing you machined on the circle adapter. Tolerances might be too loose. You should have to Freeze the bearing and heat the casing to slide them in. Otherwise they may spin. Exhaust note sounds AWESOME!
Exactly what I thought! (I'm a precision machinist) for sure he's going to have issues with that bearing not being a tighter fit. Impressive work though with what the guy has to work with 👍
For this application he can probably get away with Loctite bearing mounting compound.
not overly familiar with the mechanics but would it be feasible to pin the outer ring of a bearing in place?
@@liamvickerman4745 no its hardened.
@@aaronkashmer5882 figured as much worth a guess XD
Very impressive. Fantastic skills and something to be very proud of! It sounds great too
I agree to cross airplane engine, that would be remarkable! Keep that amazing work you do, it will be honor to visit you and pay my respect to you!🙏🏻
I have to be honest with you, I find your skills and ability to create such interesting one off engines absolutely mind blowing, I would just love to know what inspires you to do these projects?
Probably inspired by this guy. Who is the master of this sort of thing :-)
ua-cam.com/video/aTyUMgTWNv0/v-deo.html
ua-cam.com/video/sjxiHLZdSGw/v-deo.html
ua-cam.com/video/FnXUx4cYdHA/v-deo.html
I don't think he understands english.
He is Vietnamese
You rock
Google translate? 🙃
Awesome build .I'd love one of your engines
Sounds good for a 206cc garage bike! The Honda CX twin was a great idea(had this same engine layout) that never really caught on for whatever reason. I loved my Dad's CX-650 Turbo, altho I think the novelty of it being a turbo was just what made it cool for me. These are V-twins, in every sense of the was a twin works, but they still look strange because of what we've been conditioned to see as "cool".
"Sounds Record Breaking". Congratulations on your Successful Completion.
amazing !
Ala-ala BMW R9T ~
@@harrisGarasi33 r9t mah boxer
You are a genius, with great taste in motorcycles. I would genuinely love to cruise the bike here, in the U.S. Great job!
Really brilliant work. The motor seems really great. Before I got to the ride part of the video I was worried that ergonomics were going to a problem with one's knees and shins hitting the motor and air intake.
You could move the seat back-wards and make the handle bar positioned back to accommodate the seat being moved back. Might require different handlebars.
Always a problem with tall riders and Moto Guzzi's. It's something you learn to live with, at least you have warm knees in winter.
A Moto Guzzi!!!! But in a Honda Version. I LOVE IT!! Really awesome work!
Parabéns amigo, ficou top das galáxias!👏👏👏👏
Best project 🔥
A half scale Moro Guzzi! Pure genius. Well done!
Very expert technical work. Nice. Love from AIR AND ROADS UA-cam
what a genius !!! I can't imagine how you've done such a complex engine from the design, fabrication, assembly and tuning all by yourself. very unique and I think this is the first of its kind. The possibilities are endless because your such a gifted and talented person. Maybe I will watch in the future a 12 cylinder v-type "LE DAN" motorcycle engine. New subscriber here.
Check this one out. ua-cam.com/video/FnXUx4cYdHA/v-deo.html
@@uhtred7860 Was about to mention this brilliant guy too. Nothing he does is comprehensible to a normal person, and he goes like "I just take my hacksaw.." 😂
Look up Allen milyard he's done this before.
@@magicAAA "Nothing he does is comprehensible to a normal person" BS, are you afraid to say mechanically inept? Allen is good though...
@@edwardkennedy9919 Millyard...
The CX500 and especially the 650 should have never been killed off. I want to like guzzies but I've never been a fan of air cooled twins. Awesome project by the way. That sounds amazing.
loved my cx500c , had a guzzi cali spent big money tarting it up only to discover i hated it .
You're absolute genius... Love from Pakistan
Congratulations. What a great job you've done. I have a V-Twin and love the configuration
Muito bom. Muitos parabéns. É magnífico ver alguém fazer algo tão bem feito. 👍🏽
Concordo com você é incrível como o Le Dan sempre nos impressiona
Excelente trabalho parabéns.
E làm rất tuyệt vời. Tks E đã chia sẽ Video. Lời cảm ơn đến từ 81 (Gialai)🙏🙏🙏
本田機車、技術超群!這麼早年代、就能製造水 平對臥引擎、堪稱是機車界的領導者!厲害、
Yeah I can definitely see myself building stuff out of this world if I had the equipment to do it also!! But glad to see someone else with the same outlook and capable of doing things like that and please pass the knowledge on!!! Great build!!
Where are your creations ?
@@thra5herxb12s well apparently you didn't read the comment? I said I could see myself building things like that or just amazing stuff if I had the equipment to do it! Wasn't a contest I was glad to see other people even interested in this kind of work! But thanks for the comment.
Good answer
Only concerns i had with this build was timing and oil feed, thank you for spending the time to show us the oil journals and such.
Wouldn’t be too much to make an add on and a new shaft to make a v-4 now would it! (Hint Hint) 😉
Inline 4 will be more balanced, but V4 may be stronger and less chance of failure.
Can give it v-boost too 😉
lots of wonderful hacks here - turning a drill backwards in aluminum and using a damaged tap for a center punch...brilliant !!
Muy buen trabajo, la capacidad que usted tiene para crear motores es bárbara, y encima funcionan!!!! 👍
If this were a two-stroke, that would be really cool, but kudos on the ingenuity.