My First Plowing
Вставка
- Опубліковано 6 вер 2024
- -subtitles in english-
* some days later. The plowing killed my tractors first axle
-
* but I have many tractors..
So I'll take next one to finish the job
-
* old plow I bought last year as scrap metal.
subscriber miksu 96 asked: Sometimes I already asked, but it would be really nice to see the demonstration of these 82 control cabin controls. we in Finland do not have these cabs so it's interesting.
-
I learned how to plow from youtube videos.. really :)
-
This is the reason I am plowing. This field is VERY uneven
from previous owner and also has some 'small' rocks.
-
rescue mission. tractor engine stopped
and I had to tow it (starter motor not working)
--subtitles in english-
-
youtube: / hrz4x4
facebook: / hrz4x4
twitter: / hrz4x4
-
hrz4x4, 2018
Отличная работа, отличный плуг.👍
If only I had an Belarus 82, but I'm very content with the T-40am though I'll have to get the clutch all checked and fix some oil leaks
Трактор отлично выглядит для своих лет, да и работает отлично, сейчас такого качества нету . Лайк и удачи вам !!!
Согласен с тобой
У меня трактора тоже 1991 года и выглят как новые, хотя и в работе постоянно
трактор норм только овцы не могут завести!9 надо с места быстрее заведется!
С охотником соглашусь
Great video! Yes, theese kverneland ploughs are very old, but good, and reliable. We have estonian plough MA 3-35 and it has all kverneland active details, so it's easy to find replacement details
Thanks. Looks like it might just work if I install some new parts on it and learn how to plow (better).
@@hrz4x4one more thing, that this plow has small mold boards, so the working width per furrow is 30cm, if I understand right, but there are bigger mold boards, which, i hope, can be mounted on this plow and then work width will incrase to 35 cm per furrow
@@agrokanals The working width can only be changed by a different beam set up to let each body take more land, as in a vari- width, or of course adding more furrows. A different board type may leave a wider furrow for the tyre but not increase the working width. You both probably know that, but it is a common misconception. Meanwhile continue to have fun farming. Narrow tyres will always make a neater job.
@@warrenblain2365 well, you're right, I was mistaken a little bit about theese mould boards, just because it's my second season plowing, so I excuse for that what I said. But yes, practise makes perfect
Keep on enjoying what you do.
What a nice soaked field. In my country, end of summer and autumn is dry, we had no decent rain, plowing and sowing season already started, and it' s very hard to manipulate with fields. God knows what Barley and Wheat we will have next summer
What county is that? It's wet but not very and no frost.
@@hrz4x4 I'm from Serbia, northern part between Hungary and Romania
Forgot to ask this MTZ which you used for plowing is your third tractor?
Yes. It's my third tractor.
So we can expect new restoration series on your channel :-)
My first plowing was last year, took a while for a small field as my old McCormick b250 kept wanting to overheat, BUt Engine rebuilt a few weeks ago and coolant flush like mad its pretty much a new engine :)
Same here. The first hard work showed the real flaws on the tractor(s). I lost my radiator with the very first hard work etc. But they are workhorses and they should be used on full gas and also on heavy conditions.
Приветствую!
Куда пропал?
Давно не было новых видео
1:50 that sound...I Like
Yes. That engine is very good. In full throttle the oil pressure is constantly 3 bar. Unfortunately gearbox needs repairs.
Bellaruss80
Eziz Musayev its a 82 because its 4x4 and we have belarus 1025 turbo, 80uk 80l 52
Well done field look good hope not to much damage on the first tractor take care be safe
Вот это сила!
There are very few MTZ 4х4 in Bulgaria. In Bulgaria we have a tractor called "Bolgar TK 80" based on "MTZ 80". The difference is mainly in the cabs.
Very interesting. 4x4 versions are quite expensive then I guess. And you have hi and low gears in transfer box?
The price of the front drive axle with everything needed for the installation is about 1500 euro . Bulgarian "Bolgar TK 80" like transmition is the same like the "MTZ 80" in your video. I do not understand what you think about transfer box. Мaybe I can not properly translate it.
Transfer box is the section before gearbox. Some versions of mtz have hi/lo (rabbit / turtle) gears you can select from there and some countries don't have that selection. Maybe you understand now.
@@hrz4x4 Yes, all of bulgarian "Bolgar" have hi and low gear in the cabs!
Więcej wrzucaj takich filmików .Pozdrawiam;)
I always look at yours videos. I think they are very interesting. It's interesting what things you find in scrap :)
For the 1-st time it's ok ;) Greetings from Lithuania !
Dr. Zoidberg Zdarova
@@dovydasleveris3809 Labas, kas ta zdarova ?
Panasiai kaip labas
@@dovydasleveris3809 Supratau :D Labas :D
привет. хорошая вспашка с этим плугом, хорошо поворачивает борозду. Мне это нравится. Какая марка плуга?
pozdrawiam-adam
Kverneland Hydrein: ua-cam.com/video/KmOnEeG3NwA/v-deo.html
По нашей глине с камнями стойки отвалов наверное прямыми стали.
Хотя тоже дерновину пашет.
Super filmik :-) Pozdrawiam
Thanks.
M T Z 8 2
maybe front axle broke because its not synchronized with rare axle because of the tire dimensions ? im just thinking :)
maybe. or I just knew that it's not top notch and predicted it happening here: ua-cam.com/video/xB3bQyHErjE/v-deo.html
It's a big problem when you put on bigger and diferent wheels and then sometimes your front axles shaft is destroyed.
Aha, a "Kverneland"-plow, it will probably serve You well for many more years. They are quite good and robust plows. BTW, I had a really good laugh when I saw the attempt to tow. :D
UA-cam - универсальный учебник
great video! i would suggest changing the shares on the plough as they look very worn
Thanks. I agree, the plow needs some attention. But I wanted to have some experience with it before I start fixing and messing around.
how i set may plau when you go in furrow/ chanel plau must be 90 degre upright, first furow can not mowe more dirt
then second and side plate at end must toch dirt first plau must hang litll bit
Thanks.
nice front wheel they go wiggle wiggle wiggle
Yep. They wiggle until you do this: ua-cam.com/video/xB3bQyHErjE/v-deo.html
мне показалось или в начале видео на горизонте был виден т40?
этот дядя фанат русской техники?
How big was the field ? How long did it take with that 3 bottom plow ?
Thanks for posting another great video. That plough was a lucky find! I am intrigued, when you filmed around the cab and showed the hydraulic controls on the right. Is that standard or a modification? I run a 50 and a 52 on my smallholding, and as you know the gubbings are all under the seat controlled by linkage from the steering column.
Thanks. Yes, that's standard configuration for 80/82. The distributor is connected to the back wall of the hydraulic reservoir under the steering wheel and controls are on the right. You can see see configuration better in this video: ua-cam.com/video/Xzd5QZsJ4f4/v-deo.html
I enjoy in your videos ! Realy nice job .
Thanks.
good work and very good plow
Great job you have done! What happened to the front axle?
I don't know yet. Just took the other tractor and finished the job. I can still drive it but I hear some clonk-clonk in the right side knee joint.. It's going to be another part of the restoration videos :)
@@hrz4x4 Probably broked those teeth of the axle. Here is the example of the axle-- www.traktors24.lv/lv/Catalog/PrieksejaisTilts/VelkoshaisTilts/Product/2089
These are the weakest places of the whole front axle.
Probably. The knee joint was quite bad anyway and needed my attention. The other side has been open and repaired (by the previous owner). ua-cam.com/video/xB3bQyHErjE/v-deo.html
Very good job👍
Which is this tractor?
Ктож так дергает,чуть собаку тросом не разделили.
Плуг интересный
Which country?
You got nice scrap yards in country.
I honestly did not think anything about this plow before I had plowed some hectares and started to figure what the brand and maker was. It was a surprise for me also :)
Nice plow😃👍🏻
Tänavu sai ise ka täpselt samasuguse adraga maa ära küntud. Kusjuures samuti esimest korda elus. Russi tagant vaadates peab vasakpoolse püsttõmmitsa pikkus olema 515mm. On väga suur viga sellel traktoril, mis rivist väljas nüüd.
Hea teada, et vähemalt ei ole ma üksi esimest korda adraga pusserdades... Kus see öeldud on, et tõmmitsa pikkus peab selline olema? Ma suutsin leida, et tõmmitsad peavad olema ühepikkused, rohkem mitte. Ma ei tea, mis seal esisillas juhtus, parema poole põlves tundub olevat. Ei ole veel lahti lammutanud. Lakkas vedamast ja tegi kolks-kolks. Õnneks liigub ja ei ole ratas plokis.
@@hrz4x4 Mul naabrimees kogenud künnimees ütles, et vasakpoolne tõmmits peab olema 515 mm muidu atra korralikult kündma ei saagi . Ader pidi võimalikult paremale poole jääma. Viimast reguleerimist saab teha parempoolsest püsttõmmitsast keerates kas pikemaks või lühemaks. Seda juba künni käigus.
Ma oletan, et see mõõt vastab siis, kui russiga künda. Aga kõik muu tundub loogiline ja teised kommenteerijad on ka seda öelnud, et võimalikult paremal jne.
@@hrz4x4 Tere! Väga ilus töö, arvestades et maa paistab savine ja raske olema. Püsattõmmitsa pikkus pole oluline, tähtis on et adra raam oleks maaga paraleelne, see tähendab et esimene ja viimane hõlm künnaksid ühe sügavusega. Kurekaelad peavad olema maaga risti. Lõpmatult paremale sahka ajada ei ei saa, sest esimene korpus peab kündma sama laia maa kui teine korpus. Kangist saad muuta adra töölaiust, kui on kerge liivane maa, lased saha karemaa poole, kui savine raske siis künnimaa poole viilu kitsamaks kõikidel korpustel, sellega tagad et künniviilud ei lükka sahka liialt vasakule. Muidugi vanematel korpustel on vastusurve plaat väga lühike, uuematel poole pikem. Veovõllil selleks vänt sees. Kui traktoril liiga laiad rehvid, mis ei mahu künnivao sisse, trambitakse viimane künniviil kokku ja siis ei saagi esimene korpus seda täis künda. Kverleland adrad on parimad. Muidugi ideaalis kui kõik on õieti timmitud, peaks traktor jooksma otse, esirattaid pole vaja keerata vastu vagu ja tagumised külgtõmmitsad on vabad ehk ilma pingeta künni ajal. Jõudu!
@@jurih5622 Tänan abiks info eest! Mul on kogemused väga väikesed kündmisega ja selle konkreetse künnitöö suurimaks miinuseks oli adra halb seis. Peale kündmist sai päris palju juppe ära vahetada, mis olid juba ammu liiga kulunud. Parandamise video on siin: ua-cam.com/video/KmOnEeG3NwA/v-deo.html
Where are u from?
Good job! 💪👍
Finally new video ;) !
👍
Земля у вас торфяники?
Plowing is nice job
It's always good to be in the tractor and see the ground turning over.. And I am not doing this with a shovel or behind a horse - great.
@@hrz4x4 yeap
Nice plowing. How deep is it? 25 cm?
Depends the field was very bumpy and plowing height is also very varying. I did not want to make it too deep. Mostly around 15-17 cm I would guess.
Why you bought old tractors and restored them? You could buy new tractors.
Good job :D
Огонь
Tere
Mis kang see seal armatuuri all, käigukangi ees on?
Tigu/jänes kang. Poolkäigud ja tavalised pmst.
@@hrz4x4 Aitäh
Какую скорость включил, когда дергали?
в основном 2 передачи, 3 передачи не работают, иногда 4 полуприцепа
@@hrz4x4 следуюший раз второй трактор 9 скорость включите быстро заводиться
Really like your Video. Great job for first time. couldnt have done it better have also less plough Experience in total around 20 ha
Why dont you make the video a bit longer about 10 min or so. it was really Funny that you mentioned you learned it from UA-cam 😁
Thanks. Well it's true that I watched a lot of plowing videos after first day on the field.. Then I leaned how to adjust the plow and how to plow - but it's all theoretical I need some practice now. The videos come as they are filmed. I usually don't want to make them too long so the viewers don't get bored. You think they should be longer?
Absolutly. especially when its sometime new on your channel. I really doubt any of your subber would be bored when you make them longer by this kind of cool new content 😉👍
Борозды как окопы)
What is this 1:45 ?
Это чтоб трава лучше росла?
I'm sorry for that old tractor ... you'll have to fix it.
how old is that tractor
I don't know. They are both around 30-35 years old.
Count on that MTZ was built tractors with small cabins until middle /end of '80, so from end of '80 beggining of '90 MTZ has made changes in tractor appearance and start to build in the big square cabins.
Ok thanks for the information
What is that black thing at 1:45?
looks like camera tripod. just a guess.
yes. it's a camera tripod (which I never used during this video)..
@@hattifattener1 I thought its some sort of hydraulic control unit 😂😂
Как называется ваш плуг
Kverneland Hydrein MI
@@hrz4x4 у вас угол атаки как у плн3-35 или долоты по другому стоят?
@@user-bq3ch8bs5t Я не знаю.
Hrz4x4 do you speek polish? Film super a like is up
Thanks. Unfortunately not. But I know how to use a translator :)
@@hrz4x4 😂
Nice
👍делай больше видео
We have same type of plough.
Great. And are you happy with that plow?
@@hrz4x4 We've had problems with not actually turning the soil sometimes.
You used valtra to tow that? I am trying to compare tractors as I struggled a bit with narrow tires not delivering enough power to the ground.
При с Пашки надо Кун убрать знаешь какая нагрузки на передок
Бред)))) люди доп грузы вешают.
@@user-ow7oe7to3f откуда ты знаешь а? знаешь какая нагрузка на передок?
Денис Комаров я тебе ещё раз говорю что до 500 кг вперёд груз устанавливают при пахоте дабы разгрузить задний мост.
@@user-ow7oe7to3f я хз первый раз слышу такое
@@user-ow7oe7to3f но если у тебя много бабок то до тонны можешь загружать
👍👍🚜🚜🚜⛽
nice :)
Гуд видео
Small rocks - wtf .. make a video o removing it - this will be great.
:-) spring time job. I could not get the 'small stone' with this front loader - better do it in the spring.
elmamı soyuyon dayı batırsana pulluğu
Świetny filmik leci Sub i łapka up wpadnij na kanał pozdrawiam Podlaski Farmer TV :):):)
Podlaski Farmer TV
Ох ц роль
Мтз 82 иак