This takes me back to my 2016 ninja I started on. Man the struggles of going up hill we’re real, but getting over the hump was the best. I remember I hit 120 on my speedo, wind at my back, VERY steep decline, I was screaming just like you were when you hit 90. Small cc’s are underrated.
I just bought x2 125cc Dirtbikes from Venom Motorsports last week, took them out today with my wife and tested them out. Great fun! Worked 100% ... I'm a believer now!
I considered buying this last year for my first bike. But for $2400 I bought a 2009 Yamaha FZ6, which is infinitely times more reliable, and 3X more powerful. Plus there's tons aftermarket parts available for a Yamaha.
That's what I did. lol I bought a Honda CBR300 2022 so quite an upgrade from this thing and triple the price. I just didn't want something that was going to break down on me.
6:16 That's not really fair either way though, you're always adjust a brand new bike to where you want immediately, fixing things like that, changing speedo from kph to mph should not be negative points for this bike when it's a positive feature to be more accessible to people all around the world.
Oc. Looks like a decent bike. All motorcycles should be selling this way where they can ship it to your house and you don't have to pay ADM and all that BS set up fee.
The nice thing about carbs is they're easier to work on and improve performance with because they're mechanical, not computer controlled. A lot of people that get these bikes swap out the stock carb for a racing carb, like a Mikuni, and get more performance out of the bike for barely any $$.
@@masterofreality1552 100% I've seen examples of these with upgraded exhaust and carburetor reached 110mph with no problems check out a couple channels...Mike Check Moto and Jerry Hawk 250 they are two really good examples of people that have really pushed the limits of what these x22rs can do.
Chase, Your ride test really brought back memorirs of my younger days riding a 150 Honda. I'm 78 and really can't wait to get a Vitacci GTX 250 bike and start riding again !! The newer Chinese 250cc single cylinder engines are counter balanced for smoother operation and higher reving ! Plus they are vastly improved over the earlier bikes. Of course the brand of Full Synthetic Oil you use can also play a major roll in reducing friction in the engine. * Per a recent comparison test of all the different brands of Oil, (AmsOil Full Synthetic) scored higher than any of the others !! Also it is compatible with wet Clutch Transmissions which these Chinese bikes have ! Only a few of the other brands made the same claim of wet Clutch use. Also a decent, well lubricated X ring drive chain plus a good pair of tires will also reduce rolling resistance for better acceleration and road grip as well as handling !
I'm 55 now but 2 yrs ago I got 200cc EFI Adult Chinese scooter on Amazon. First time I rode anything or two wheels since I was a teenager. I love it and after two years already looking for something like this.
The bike's biggest weakness is the frame welds... they're absolutely shameful... The engine is simple and decent with the powerband between 5-7k rpms. Suspension is serviceable for anyone under 200lb. Gearing is a little off and a 17T front and 38T rear sprocket would be ideal. (I think the "newer" models come with a 17T and a 42T). But those frame welds are just irredeemable... A possible fix (beyond rewelding the entire frame) would be a full disassembly and using rubber washers on all the engine mount bolts and the exhaust...but that's kind of a taboo subject...
Honestly it’s a good looking bike and probably makes a good bike to learn to ride and work on, add a few upgrade and be affordable. That’s pretty cool as a beginner. I’m looking to get my first bike after the winter and I think I might take this as a serious option.
For something like a small commuter bike for like a college student or high schooler this would work quite well. Yeah not the best bike in the world but for what you need and what money you have this doesn't seem that bad.
Great review Chase, after listening to this for the second time in two months I'm ready to get the Vitacci GTX 250cc (basically the same bike for a about the same price)from Amazon ! At 78 yrs old I'm excited to once again get back to riding after 61 years, OC !
@@visionsbymike1789 I have to admit. I don't ride as much since I upgraded to a CBR 500R. But I still give her a spin here and there. I have to find more time to mount my cam. I got one for recording my rides. Hopefully I can get things set up soon.
OC: Awesome first ride Chase. The X22R is a beautiful bike especially when you think it's just $2400. Love those triple trees. I think it'll be a perfect 1st bike. Especially if you consider buying your gear with the cost of the bike, you could be under 5k and be ready to go riding. As one who started on a Ninja 250 just over a decade ago. I would love to own a X22R. Getting an Aprilia RS 660 so may have to wait to get the X22R but definitely a bike to look into.
OC: I was pleasantly surprised with this one. I've been looking at their site and I have my eye on the KPM200 in black. I love the cafe racer/naked bike look! I didn't realize how many different bikes they had to choose from!
Yeah he did the X24 which may or may not be the same model. (efi vs carb). But he's a bit of a bike snob. I've owned 2 "real" bikes (Triumph Street & XB9) this bike is a toy. You can disassemble it in an afternoon. That being said it's a fun distraction to putt around town.
And the best part about the bike is that the upgrades make it a totally different bike it may look the same but it totally accelerates brakes handles differently but you have to upgrade it just a little bit not a lot
Top speed on those is like 65-mph. I use to drive mine to work every day. I would recommend a hyosung gd250r for a starter bike. IMO it’s the best 250 on the market
Hyosung bikes are so much harder to find these days. I wanted one. Before this world mess, I would see them for $2600. Now I can't find one. Korea is kinda big time with the vehicles these days. The bikes should be easier to find. But China bikes are easy to find and easy to upgrade.
Hey Chase, I'm 57 wanting to ride my first bike. A Kawasaki fan since the late 80s early 90s. I think the Venom 250 looks awesome. As much as I love the 600 + Class, I don't want to miss the fun in my journey in motorcycling. I know I will have good & bad times in this but that's Life. And yes love how it looks and so affordable. I think it's a great bike for entry level for people like me. Always wanted to ride but exes would say No!!! Great vid!! Great info!!
Love it bro, I'm getting back into riding after a few years off a bike. I like this bike as a way to get more experience and could be a decent little commuter for me. Great video, thanks for this :)
i have to agree that it's just badass that you can buy a machine of this quality for cheap these days. it's quite capable for daily rider type bike and can do highway speeds if needed. no, it' s not an interstate touring machine or a high power racing machine. it's fun anyway though
OC been waiting for you guys to do a full review on this since the X22! As someone who's done MSF and looking for an entry level bike I think this is perfect! Cant wait to see the mods
It's still funny that chase is 230lbs and stock this bike is so restrictive.... It has so much more to give.... Cat delete and hot cam with high comp piston... Plus a advance flywheel key.. U in business... Stay safe peeps...
Even the car camera crew like the bike I really appreciate the review the positive thoughts shared of information and the share exhilaration of riding the x22r
Ordered some brighter headlights. Stock are ok, needed something to see clearer, and a white color temp than what halogen produces. 2800 -3500k vs 6500k makes a big difference at night
OC: Sounds like a great entry level machine. I only worry about parts availability. Nothing lasts forever, so where do you go when you need a new starter relay or replace broken plastics?
10:20 That’s actually why I’ve been looking around for a nice cheap, point a to point b bike. Just looking for something to go to and from work while not spending a whole lot of gas. Looked at the xpro 250cc fuel injected version also. Would be cool if you guys could checkout some other cheap brands since you actually know what you’re doing
I’m 14 I was riding a mini bike till I was 11 I’m currently riding dirt bikes I’m getting my motorcycle learners permit this week been wanting a motorcycle for years now I can finally ride one
I live in Norway and drive a Yamaha yzf r125. I got it up to 87 mph. (the engine has 15bhp) Would be sick to have them in the US. (like the honda grom 125cc) I think the quality of the engines has a lot to say when it comes to 125cc four-stroke engines.
I was just talking to a buddy about my move back down to the south (born and raised in Bama, currently in KS) to ATL and finding a good small bike that would be good for commiting. It'll likely be the Ninja 400 but just found it interesting this little bike popped up after that conversation lol
This would make a great commuting bike for me too. I learned on a ninja 600 years ago . My car broke down and i dont want to put any more money into it and will get a different car but i think i will get this bike first and then get a car and then in a couple of years get the ninja 400
I’m gonna say this to every moto channel I watch.... but thank you. For keeping me happy and alive.. I hope I can get a bike either before I go to bootcamp or right after when I can afford one. I’d love a cafe racer but that seems so hard. But thank you for helping me a lot. If I was able to get this bike, it would help so much because I just need to get out of here and never have had any transportation. Any bike would freaking help but ugh I just need to get out of here. Trying to go to Marines and hopefully things will change. I don’t plan on having a car for a long time.
@@titanstrong85 you say you never road before so are you stating this is your first motorcycle ever driven?? I ask because I don’t know how to ride a manual cycle it’s been over a decade I’ve forgot. I like the bike got the money but I need hope I’m not sure I can do it without fucking up
@@cardelljermaine76 yes ive never riden before i bought this bike. I learned how to ride the day i got it in a parking lot next to my highrise. Fun bike but after about 3-4 weeks i was already wishing it had more power. Thats how quickly i got comfortable ridin
@@titanstrong85 yep just as I figured. And also your reaction let’s me know all the people who been telling me I need a bigger faster bike and will outgrow that x22r 250cc bike we’re pointing in the right direction…enjoy your bike get the upgrade kit to max the speed & acceleration out.
@@cardelljermaine76 yes but dont get this bike. I sold it and boughr a ninja 400. Night and day difference i csnt believe i bought that piece of junk. Didnt knkw any better at the time so i had nothing to compare it too. Dont buy this bike!!
@@markarmstrong9795 I ordered mine from Venom Motorsports, the same people who sent Chase the bike in the video. Belmonte Bikes & Red Fox Powersports also sell this bike.
@@markarmstrong9795 also if you decide to use Venom Motorsports, they have a $50 off code for the bike. I ordered mine for $2,349.99 but now it's $2,499
@@Daniel-dj7fh wouldn’t the grom seem kinda counter productive if he could get a 250cc for $2,500 that can do 80ish mph vs a 125cc for $3,400 that does 60ish mph? please correct me if i’m wrong, looking for a first bike as well.
If I get one of these after awhile riding get back and forth from Jacksonville to St Augustine for work. Definitely going take a paid vacation just ride from Florida to California. Cross country would be the ultimate test
Now that the prices for these have gone up a Duke 200 on sale at a dealership can be cheaper. Excluding registration & things (required for both) if you pay venom to set up the bike the difference in price is a wash. Unless you complete the setup yourself there isn’t much savings.
Wrote this in Jan midwinter & it’s easy to get a duke 200 for $1,000 below Msrp (~$3600 out the door with all fees). If you’re reading in summer during peak ride season & venom does a sale then that will likely make more sense but right now an on sale duke 200 is as cheap as a Honda grom
This is more of a single cylinder 4 stroke verse a v twin 4 stroke closer to 250 cc displacement....a Suzuki GSX250R has a hp rating 24 hp v twin 248cc displacement, these 250cc bikes are closer to 232cc displacement....slightly under 24HP rating. The weight difference is about 48 lbs Suzuki being heavier. Both are good for beginners love the Suzuki Nebula Blue scheme.
So how has the bike held up? Followed your whole low cc series then found this! Looking for a re entry bike, concerned with build quality, love the price of this
I'll make a suggestion, MOST people need to buy a 250-300cc as a starter bike, and visit a small road course track for lessons. Learn how to take/enter fast corners, corner brake and how to use proper technique. This will help you really learn how to ride a motorcycle faster. Buying a 500cc plus motorcycle and just street ride going fast in a straight line is going to limit your riding ability. Riding a motorcycle fast is about technique, confidence, experience and knowledge. You see it all the time at the track. A street rider shows up at the beginner class in a beautiful 600 or 1000, crashes or gets smoked and lapped by a experienced 300/400 rider. Next month you see him on a 250/300/400.
Imagine this with the nibbi carb intake and air filter then that venom offers when you buy 1 now. And the exhaust they offer. Now I wonder how much power you can gain from it
I would rather go for a ninja 300. They sell 2017 models with 0 miles on em for just a bit more then this bike where I live. I remember you didn’t like the 300 ninja, and you like this so much?
i couldnt agree with you more about the fun of these small bikes... i myself have bt200-25 and i call it the little beastie for the fun of it and the lightness riding around inside the city... it really for fun riding around time 🥰🥰🥰🤩🤩🤩🤩
I’m a smaller rider about 5’10” and 160 so this seems like a good fit for me . I’m not into racing on two wheels but love cruising . I’m seriously considering this
COTW: Wondering which bike you would prefer/pick/recommend ,, of either the KPR200 or the X22R 250,,, i like both but would really like to see the fuel injection and 6spd and h2o cooling on the X22R ......
Tough one. They both look cool and decent reviews on both. I'd probably get the KPR. More my style but the X22r got me really thinking about it differently lately.
On the highway watching you do the top speed run you can hear the motor barely be able to breathe I'm pretty sure the pod filter and a slip-on exhaust it sounds like a 300 or a 350 and the only thing you would probably need instead of a ECU flash with the bike doesn't have all you need is a racing CDI.... It's like you purchase an upgraded x22RR
OC: I could see commuting on it. Not on the roads I would have to stay off the "I"s (especially around where I live) But for roads under 60 MPH, yeah, all day. After I rans an oil change or two I'd look a better carb for it. With a little Googling I think it could pick up some nice power and be a solid little around town, country commuter/fun ride.
For some reason this motorcycle review brings a theme to mind.... 2013 WWE evolution theme.....chase rolling down the road as the intro starts...as soon as he stops the beat drops...... Evolution is a mystery....🎶🎤
Chinese bikes are always fun. The only downside is that most motorcycle dealerships won't touch them. lol. I actually own a 2020 Lifan KPM 200. It's my commuter, currently. Better on gas than my MT-10 (and slower, so no tickets), but slightly higher maintenance. I enjoy the bike, though. Especially when I can take it through the twisties at full throttle, because it doesn't go any faster than 65 on flat land with me on it. lol.
Replace that rear sprocket with a 36 tooth. That will just about eliminate all the vibration and will be more comfortable riding at interstate speeds. Check out some of my videos n the mods i have done.
@@YusefWakeel only issue I had was the gear shift c clip seemed to come off. Aside from that ($ 0.65 part at local hardware), great. I love it. Could use some padding to dampen the rattle at high RPMs but that's also a cheap fix. Overall I am pleased, esp for the price point. Only other thing I would do is adjust the handle bars. A bit to narrow and can cause wrist fatigue, or a tender wrist for a day or so...it's the angle. But over all it feels like a solid bike for the money. But make sure your break res lines are tight. Mine leaks when not in use over night.
@@thechosen5805 I tightened as much as I could see leading to/from the area. I hadn't seen any since, but I did have to add more fluid due to it leaking out previously. I'm still trying to keep a watch out. Had to get my exhaust/muffler area welded. It broke right around where the slip on fits. But now I have to find out if it's off centered, its noticeably louder now, like there is an exhaust leak coming from the engine area where it screws in...and low end torque has vanished a bit. There seems to be a bit of a gap there, im wondering if something fell out...or if it actually came like that. The gap where the exhaust pipe goes into the engine is open quite a bit, almost like something fits there...but its not there.
@Anonymous took 4-5 business days. If you place in order Sunday or Sunday night you should receive it by Friday or Monday. But it's also dependent on where you stay in the US. If they decide to ship from a warehouse that's closer to you it may not take as many days
As a MT10 owner, i learned the that riding a slow bike fast is more fun than fast bike slow. i need a second bike.
Grab a Ninja 400.
@@exothermal.sprocket if you can get your hands on one id even go try to get a zx250rr
@@Daniel-dj7fh I'm in the States. They won't import any here.
Grab a Harley
@@ayang.4923 And roll it off a tall cliff.
OC: Third class riding will always beat first class walking
I don't like walking to the store across the street lol. Cant wait to get me one of these!
word
It’s almost half that’s price in for equivalent bike in Mexico
Or a bicycle
@@thee_abstractionist3917 🔥🚴🏻♂️🔥
This takes me back to my 2016 ninja I started on. Man the struggles of going up hill we’re real, but getting over the hump was the best. I remember I hit 120 on my speedo, wind at my back, VERY steep decline, I was screaming just like you were when you hit 90. Small cc’s are underrated.
100cc or 1100cc bikes are just fun!
How fucking heavy are you for a Ninja to struggle? Lose some weight bud.
I just bought x2 125cc Dirtbikes from Venom Motorsports last week, took them out today with my wife and tested them out. Great fun! Worked 100% ... I'm a believer now!
I considered buying this last year for my first bike.
But for $2400 I bought a 2009 Yamaha FZ6, which is infinitely times more reliable, and 3X more powerful.
Plus there's tons aftermarket parts available for a Yamaha.
That's what I did. lol I bought a Honda CBR300 2022 so quite an upgrade from this thing and triple the price. I just didn't want something that was going to break down on me.
I'm in the same boat. Would you guys go for a 2011 Kawasaki ninja 400 or this bike?
@@binginghereN400 no question
6:16 That's not really fair either way though, you're always adjust a brand new bike to where you want immediately, fixing things like that, changing speedo from kph to mph should not be negative points for this bike when it's a positive feature to be more accessible to people all around the world.
I'm legit stoked that smaller displacement bikes are finally getting appreciated tho, they're so much fund to ride.
Cheap and efficient fun.
@@sabiti5428 legal fun too
Dude I'm like freaking out
Oc. Looks like a decent bike. All motorcycles should be selling this way where they can ship it to your house and you don't have to pay ADM and all that BS set up fee.
The nice thing about carbs is they're easier to work on and improve performance with because they're mechanical, not computer controlled. A lot of people that get these bikes swap out the stock carb for a racing carb, like a Mikuni, and get more performance out of the bike for barely any $$.
Does it make it a little faster or what?
@@masterofreality1552 Indeed! It adds a little horsepower and improves throttle response.
@@masterofreality1552 100% I've seen examples of these with upgraded exhaust and carburetor reached 110mph with no problems check out a couple channels...Mike Check Moto and Jerry Hawk 250 they are two really good examples of people that have really pushed the limits of what these x22rs can do.
Chase, Your ride test really brought back memorirs of my younger days riding a 150 Honda. I'm 78 and really can't wait to get a Vitacci GTX 250 bike and start riding again !!
The newer Chinese 250cc single cylinder engines are counter balanced for smoother operation and higher reving ! Plus they are vastly improved over the earlier bikes.
Of course the brand of Full Synthetic Oil you use can also play a major roll in reducing friction in the engine.
* Per a recent comparison test of all the different brands of Oil, (AmsOil Full Synthetic) scored higher than any of the others !! Also it is compatible with wet Clutch Transmissions which these Chinese bikes have ! Only a few of the other brands made the same claim of wet Clutch use.
Also a decent, well lubricated X ring drive chain plus a good pair of tires will also reduce rolling resistance for better acceleration and road grip as well as handling !
I'm 55 now but 2 yrs ago I got 200cc EFI Adult Chinese scooter on Amazon. First time I rode anything or two wheels since I was a teenager. I love it and after two years already looking for something like this.
The bike's biggest weakness is the frame welds... they're absolutely shameful... The engine is simple and decent with the powerband between 5-7k rpms. Suspension is serviceable for anyone under 200lb. Gearing is a little off and a 17T front and 38T rear sprocket would be ideal. (I think the "newer" models come with a 17T and a 42T).
But those frame welds are just irredeemable... A possible fix (beyond rewelding the entire frame) would be a full disassembly and using rubber washers on all the engine mount bolts and the exhaust...but that's kind of a taboo subject...
I would love to learn. I'm short 4 ft 10 and I'm looking for a bike. Would this be a good bike?
Honestly it’s a good looking bike and probably makes a good bike to learn to ride and work on, add a few upgrade and be affordable. That’s pretty cool as a beginner. I’m looking to get my first bike after the winter and I think I might take this as a serious option.
For something like a small commuter bike for like a college student or high schooler this would work quite well. Yeah not the best bike in the world but for what you need and what money you have this doesn't seem that bad.
Great review Chase, after listening to this for the second time in two months I'm ready to get the Vitacci GTX 250cc (basically the same bike for a about the same price)from Amazon !
At 78 yrs old I'm excited to once again get back to riding after 61 years, OC !
About to hit 400 miles, still going strong!
I sure hope so lol
How about now?
@@visionsbymike1789 Right at 1100 and still kicking!
@@visionsbymike1789 I have to admit. I don't ride as much since I upgraded to a CBR 500R. But I still give her a spin here and there. I have to find more time to mount my cam. I got one for recording my rides. Hopefully I can get things set up soon.
Did it ever give you any issues?
OC: Awesome first ride Chase. The X22R is a beautiful bike especially when you think it's just $2400. Love those triple trees. I think it'll be a perfect 1st bike. Especially if you consider buying your gear with the cost of the bike, you could be under 5k and be ready to go riding. As one who started on a Ninja 250 just over a decade ago. I would love to own a X22R. Getting an Aprilia RS 660 so may have to wait to get the X22R but definitely a bike to look into.
I keep seeing everyone start their comment with "OC:" What does that mean?
X22 is a down grade..lol
OC: I was pleasantly surprised with this one. I've been looking at their site and I have my eye on the KPM200 in black. I love the cafe racer/naked bike look! I didn't realize how many different bikes they had to choose from!
it looks snazzy, benelli also got similar looking bikes (leonchino 500). maybe something which might intrest you
That dash cluster looks like they got it straight from a 2012 CBR250R. The gold triple is AWFUL. It doesn’t sound very nice.
I want one.
Yes i was thinking the same thing, that triple is the chonkiest ugliest triple ever.
the dash has an LCD ring around too along with a needle ( nice )
I agree, what's with that hideous color on the triple? Like where do manufacturers come up with the idea to use that God awful color.
@@Kris_P._Bey_Ken the oldest thing I've seen in that color is 70s aftermarket race heads for 2 strokes. 🧐
I believe that color anodize is listed as pumpkin piss #10
Yammie noob has done several videos on this thing. Highly recommend watching that before deciding from this video.
Yeah he did the X24 which may or may not be the same model. (efi vs carb).
But he's a bit of a bike snob.
I've owned 2 "real" bikes (Triumph Street & XB9) this bike is a toy.
You can disassemble it in an afternoon. That being said it's a fun distraction to putt around town.
Love the content man been watching for a while and just got my first bike...u really helped me pursue the love of riding!
Honestly, to see a professional say that this is a good bike, really solidifies me wanting to get it as soon as I can. Thank you.
Also, OC.
Just off from watching Yammie Noob’s Venom review
And the best part about the bike is that the upgrades make it a totally different bike it may look the same but it totally accelerates brakes handles differently but you have to upgrade it just a little bit not a lot
Im getting a 50cc to go to work and back then work my way up
the fact that this doesnt feel cheap when you ride it is really cool.
OC: Wasn't surprised to see it actually feel and behave like a motorcycle, but I was surprised that it was carbureted.
I noticed that too in the previous video. I could see the outline of a carb when the light came through the bike when they were checking it out.
Alot of Chinese manufactured bikes still use carbs to help keep costs lower than competitor's.
@@jakebranch6366 the lifans are EFI and just a tad more, or cheaper if you get the dual sport at $2k
Top speed on those is like 65-mph. I use to drive mine to work every day.
I would recommend a hyosung gd250r for a starter bike. IMO it’s the best 250 on the market
You’re thinking if the x22 i believe. The x22r reaches 90.
Hyosung bikes are so much harder to find these days. I wanted one. Before this world mess, I would see them for $2600. Now I can't find one. Korea is kinda big time with the vehicles these days. The bikes should be easier to find. But China bikes are easy to find and easy to upgrade.
I sold my GD250 last year, I really regret it now. It was a awesome little 250. Exhaust, filter, light battery, tires...you can't find them now.
I'm thinking a used ninja 300 might be a better buy
Hey Chase, I'm 57 wanting to ride my first bike. A Kawasaki fan since the late 80s early 90s. I think the Venom 250 looks awesome. As much as I love the 600 + Class, I don't want to miss the fun in my journey in motorcycling. I know I will have good & bad times in this but that's Life. And yes love how it looks and so affordable. I think it's a great bike for entry level for people like me. Always wanted to ride but exes would say No!!! Great vid!! Great info!!
Did you get a bike yet?
Ohh yeah!! Just purchased a 2006 Hyosung Aquila GV650 very low mileage in Great condition for its age.
@@mezmorizedauto1 💪🏾
So is this like a modified Honda CBR250R? I mean, the speedo is from that bike and so is the engine...
Love it bro, I'm getting back into riding after a few years off a bike. I like this bike as a way to get more experience and could be a decent little commuter for me. Great video, thanks for this :)
Most entertaining 1st ride I've seen of this bike!
i have to agree that it's just badass that you can buy a machine of this quality for cheap these days. it's quite capable for daily rider type bike and can do highway speeds if needed. no, it' s not an interstate touring machine or a high power racing machine. it's fun anyway though
OC been waiting for you guys to do a full review on this since the X22! As someone who's done MSF and looking for an entry level bike I think this is perfect! Cant wait to see the mods
It's still funny that chase is 230lbs and stock this bike is so restrictive.... It has so much more to give.... Cat delete and hot cam with high comp piston... Plus a advance flywheel key.. U in business... Stay safe peeps...
Even the car camera crew like the bike I really appreciate the review the positive thoughts shared of information and the share exhilaration of riding the x22r
Ordered some brighter headlights. Stock are ok, needed something to see clearer, and a white color temp than what halogen produces. 2800 -3500k vs 6500k makes a big difference at night
OC: Sounds like a great entry level machine. I only worry about parts availability. Nothing lasts forever, so where do you go when you need a new starter relay or replace broken plastics?
I have the auto 250 cc version of this fun bike great on highway for Travel lane is fine .I commute on route 8 and 84 west In my city .
10:20 That’s actually why I’ve been looking around for a nice cheap, point a to point b bike. Just looking for something to go to and from work while not spending a whole lot of gas. Looked at the xpro 250cc fuel injected version also. Would be cool if you guys could checkout some other cheap brands since you actually know what you’re doing
I’m 14 I was riding a mini bike till I was 11 I’m currently riding dirt bikes I’m getting my motorcycle learners permit this week been wanting a motorcycle for years now I can finally ride one
The bikes are 2700 now
I live in Norway and drive a Yamaha yzf r125. I got it up to 87 mph. (the engine has 15bhp) Would be sick to have them in the US. (like the honda grom 125cc) I think the quality of the engines has a lot to say when it comes to 125cc four-stroke engines.
This is why I bought one that laugh is what I do everytime lol 😂 great video !!!! And I’m a beginner too perfect bike for me
Do u need a license to ride this?
How’s the bike holding up?
OC not surprised at all that's it's an actual motorcycle, just cuz it's cheap don't mean it's not 2 wheels
It's cool but I picked up my 2003 Suzuki sv1000s for $2300 and it's been easy to keep running
I was just talking to a buddy about my move back down to the south (born and raised in Bama, currently in KS) to ATL and finding a good small bike that would be good for commiting. It'll likely be the Ninja 400 but just found it interesting this little bike popped up after that conversation lol
This would make a great commuting bike for me too. I learned on a ninja 600 years ago . My car broke down and i dont want to put any more money into it and will get a different car but i think i will get this bike first and then get a car and then in a couple of years get the ninja 400
I’m gonna say this to every moto channel I watch.... but thank you.
For keeping me happy and alive.. I hope I can get a bike either before I go to bootcamp or right after when I can afford one. I’d love a cafe racer but that seems so hard. But thank you for helping me a lot.
If I was able to get this bike, it would help so much because I just need to get out of here and never have had any transportation. Any bike would freaking help but ugh I just need to get out of here. Trying to go to Marines and hopefully things will change. I don’t plan on having a car for a long time.
OC: You're quite right about the numbers and spec sheets. You can't quantify an art, or feeling
I bought my Venom 250cc yesterday and it will be here in 4-7 business days!! Cant wait!! Its the exact same as this one
How is it riding? I’d love to hear about your experience.
@@titanstrong85 you say you never road before so are you stating this is your first motorcycle ever driven?? I ask because I don’t know how to ride a manual cycle it’s been over a decade I’ve forgot. I like the bike got the money but I need hope I’m not sure I can do it without fucking up
@@cardelljermaine76 yes ive never riden before i bought this bike. I learned how to ride the day i got it in a parking lot next to my highrise. Fun bike but after about 3-4 weeks i was already wishing it had more power. Thats how quickly i got comfortable ridin
@@titanstrong85 yep just as I figured. And also your reaction let’s me know all the people who been telling me I need a bigger faster bike and will outgrow that x22r 250cc bike we’re pointing in the right direction…enjoy your bike get the upgrade kit to max the speed & acceleration out.
@@cardelljermaine76 yes but dont get this bike. I sold it and boughr a ninja 400. Night and day difference i csnt believe i bought that piece of junk. Didnt knkw any better at the time so i had nothing to compare it too. Dont buy this bike!!
hey what happend to u guys doing more with this bike
Literally can’t wait to buy one of these
Any comments since you have bought it?
Decided this will be my first bike, I'm getting it in April and I couldn't be more excited
Update: I ordered my bike today thanks to biden lol
Where'd ya get it and how much I'm lookin for a starter bike for my son
@@markarmstrong9795 I ordered mine from Venom Motorsports, the same people who sent Chase the bike in the video. Belmonte Bikes & Red Fox Powersports also sell this bike.
@@markarmstrong9795 also if you decide to use Venom Motorsports, they have a $50 off code for the bike. I ordered mine for $2,349.99 but now it's $2,499
@@markarmstrong9795 You could consider the grom if your kid is by any chance under 17
@@Daniel-dj7fh wouldn’t the grom seem kinda counter productive if he could get a 250cc for $2,500 that can do 80ish mph vs a 125cc for $3,400 that does 60ish mph? please correct me if i’m wrong, looking for a first bike as well.
If I get one of these after awhile riding get back and forth from Jacksonville to St Augustine for work. Definitely going take a paid vacation just ride from Florida to California. Cross country would be the ultimate test
My X22R is scheduled to ship out to me sometime in Mid September! Im very excited! Ordered it with A Nibbi Air filter and Nibbi Carb😈
This would be a cool little bike to pick up and do modifications to. Great customize material here.
What is the price of the Insurance for a 250cc bike
Man that highway testing is just so awesome! 2400 dollars!!! That’s crazy! I’m impressed!
Now that the prices for these have gone up a Duke 200 on sale at a dealership can be cheaper. Excluding registration & things (required for both) if you pay venom to set up the bike the difference in price is a wash. Unless you complete the setup yourself there isn’t much savings.
Wrote this in Jan midwinter & it’s easy to get a duke 200 for $1,000 below Msrp (~$3600 out the door with all fees). If you’re reading in summer during peak ride season & venom does a sale then that will likely make more sense but right now an on sale duke 200 is as cheap as a Honda grom
Would be awesome to see a compare video vs a GSXR-250
This is more of a single cylinder 4 stroke verse a v twin 4 stroke closer to 250 cc displacement....a Suzuki GSX250R has a hp rating 24 hp v twin 248cc displacement, these 250cc bikes are closer to 232cc displacement....slightly under 24HP rating. The weight difference is about 48 lbs Suzuki being heavier. Both are good for beginners love the Suzuki Nebula Blue scheme.
FINALLY Suzuki's GSX250R has a competitor. I'd love to see a head to head between them
There is the 200 Duke, and a 390 Duke, also look at CF Moto 300ss. But Suzuki is good for what it is.
@@JessicaSimonson1976 The CFMOTO 300ss looks awesome. I'm waiting for the 450ss, that bike looks even better and is a fantastic buy for the money.
@@JimmyPtheman sure is
Do you think there would be some after market or Honda parts that would up the performance a bit?
Have you done a video with the KPR200? Got it from Venom as well. I commute with it on the highway.
From what I can gather is that this is a Honda crf230f motor put into a ninja 300 frame and body parts?
So how has the bike held up?
Followed your whole low cc series then found this!
Looking for a re entry bike, concerned with build quality, love the price of this
I'll make a suggestion, MOST people need to buy a 250-300cc as a starter bike, and visit a small road course track for lessons. Learn how to take/enter fast corners, corner brake and how to use proper technique. This will help you really learn how to ride a motorcycle faster. Buying a 500cc plus motorcycle and just street ride going fast in a straight line is going to limit your riding ability. Riding a motorcycle fast is about technique, confidence, experience and knowledge. You see it all the time at the track. A street rider shows up at the beginner class in a beautiful 600 or 1000, crashes or gets smoked and lapped by a experienced 300/400 rider. Next month you see him on a 250/300/400.
So enthusiastic got me sold on this, I'm a short guy anyway so I can't really ride larger bikes
at least its fast enough to get back to the future
Imagine this with the nibbi carb intake and air filter then that venom offers when you buy 1 now. And the exhaust they offer. Now I wonder how much power you can gain from it
Now that this video is a year old, how has it held up? A 250, I think, would be a great size for me. Just want a back road toy, not a highway ripper.
I'm so tempted. But I too want an electric motorcycle. Looking forward to the review on the bike you mentioned at the end.
your intros are so smooth
Can you please do a review on the venom 250 automatic 🙏 motorcycle please
Intro beat was bangin
7:59 Looked like the car behind him was about to rearend him until I realized it was in the next lane over. LOL
Chase if you have a later model GoPro it has a built-in GPS.
Got one today love it.
How is it holding up for you? Thinking about ordering one right now, but need some honest reporting that is not persuaded by $$$$
I would rather go for a ninja 300. They sell 2017 models with 0 miles on em for just a bit more then this bike where I live. I remember you didn’t like the 300 ninja, and you like this so much?
kawasaki didn't send the check. thats why
to be honest even small displacement bikes are freakin fun. hell i've had fun on a damn mini bike before
Agreed
i couldnt agree with you more about the fun of these small bikes... i myself have bt200-25 and i call it the little beastie for the fun of it and the lightness riding around inside the city... it really for fun riding around time 🥰🥰🥰🤩🤩🤩🤩
I’m a smaller rider about 5’10” and 160 so this seems like a good fit for me . I’m not into racing on two wheels but love cruising . I’m seriously considering this
Hey did you end up getting it? I'm 6'2 around 190 so I wanted another opinion on it
Wait! 11:45 the bike says 88 mph? There's a sedan wagon flies by him. That means the car must've been doing like 110 mph?! No way, no way. Sorry.
Yea if he was going that fast that cop who was behind him would have pulled him over
Iam getting the KPR 200 from lifan its a awesome bike
COTW: Wondering which bike you would prefer/pick/recommend ,, of either the KPR200 or the X22R 250,,, i like both but would really like to see the fuel injection and 6spd and h2o cooling on the X22R ......
Tough one. They both look cool and decent reviews on both. I'd probably get the KPR. More my style but the X22r got me really thinking about it differently lately.
Upgraded, do you think this would do alright on a 850 mile road trip?
On the highway watching you do the top speed run you can hear the motor barely be able to breathe I'm pretty sure the pod filter and a slip-on exhaust it sounds like a 300 or a 350 and the only thing you would probably need instead of a ECU flash with the bike doesn't have all you need is a racing CDI.... It's like you purchase an upgraded x22RR
230 is heavy?
How would you compare this to the suzuki gsx250r? Because I know you hated that bike. I'm getting back into motorcycling and seriously wanted to know.
Congrats on 1 mil!
OC: I could see commuting on it. Not on the roads I would have to stay off the "I"s (especially around where I live) But for roads under 60 MPH, yeah, all day. After I rans an oil change or two I'd look a better carb for it. With a little Googling I think it could pick up some nice power and be a solid little around town, country commuter/fun ride.
You can get the Nibb adjustable carbs but believe this is fuel injected? Don't quote me on that though.
For some reason this motorcycle review brings a theme to mind.... 2013 WWE evolution theme.....chase rolling down the road as the intro starts...as soon as he stops the beat drops...... Evolution is a mystery....🎶🎤
That's what I'm trying to do now but I'm not making enough between bills and other life expenses
Chinese bikes are always fun. The only downside is that most motorcycle dealerships won't touch them. lol. I actually own a 2020 Lifan KPM 200. It's my commuter, currently. Better on gas than my MT-10 (and slower, so no tickets), but slightly higher maintenance. I enjoy the bike, though. Especially when I can take it through the twisties at full throttle, because it doesn't go any faster than 65 on flat land with me on it. lol.
Where can I get one I'm from Orange,Texas and I would like to get me one I can afford this one
Replace that rear sprocket with a 36 tooth. That will just about eliminate all the vibration and will be more comfortable riding at interstate speeds. Check out some of my videos n the mods i have done.
Did y’all do the video with all the upgrades? I’m not finding it
I rode my 2016 hyosung gv250 on the thruway and it would go about 70 mph.
I'd replace that motor with the Suzuki Inazuma GW250 Which can potentially give the top speed up to 138KM/h
I love your first rides!! Can we see a newer zx6r?? :)
Been waiting on this one... Just picked one up last month
How is it?
@@YusefWakeel only issue I had was the gear shift c clip seemed to come off. Aside from that
($ 0.65 part at local hardware), great. I love it. Could use some padding to dampen the rattle at high RPMs but that's also a cheap fix. Overall I am pleased, esp for the price point. Only other thing I would do is adjust the handle bars. A bit to narrow and can cause wrist fatigue, or a tender wrist for a day or so...it's the angle. But over all it feels like a solid bike for the money. But make sure your break res lines are tight. Mine leaks when not in use over night.
@@techjunkie3916 did you tighten the brake lines? Does it still leak? Was it a bad o-ring?
@@thechosen5805 I tightened as much as I could see leading to/from the area. I hadn't seen any since, but I did have to add more fluid due to it leaking out previously. I'm still trying to keep a watch out. Had to get my exhaust/muffler area welded. It broke right around where the slip on fits. But now I have to find out if it's off centered, its noticeably louder now, like there is an exhaust leak coming from the engine area where it screws in...and low end torque has vanished a bit. There seems to be a bit of a gap there, im wondering if something fell out...or if it actually came like that. The gap where the exhaust pipe goes into the engine is open quite a bit, almost like something fits there...but its not there.
@Anonymous took 4-5 business days. If you place in order Sunday or Sunday night you should receive it by Friday or Monday. But it's also dependent on where you stay in the US. If they decide to ship from a warehouse that's closer to you it may not take as many days