Put a alcohol like alot and it will sip right into the rubber leave it for 1 to 5 minutes then you hot air gun and the passive radiator rubber can be take down easy by hands
@@TaylorSoloaiJR yep alcohol softens the glue inside the rubber and dont worry thr alcohol will go inside the rubber and after 5 minutes it will soften the glue and heat it up
@@ralseichanuwu is there a way not to use heat gun and only use alcohol? if it can soften the glue we probably don’t have to use heat gun and just apply pressure for opening
@@sakibsarwat5064 you need heat gun or hair dryer to complete the process alcohol cannot help it self alone it needs heat to disipate from the glue also it really depends but you may have a chance on ripping the passive radiator if you force it too . . .
Ohh thanks! You’re correct, I need to open the PRs to fully dismantle the speaker and swap the connectors inside the amp. I didn’t continue further since I don’t want to mess the PRs. Haha! The wires inside front drivers are glued shut. I’m thinking upgrading the front drivers to a 2 6w full range ones and the 30w for the woofer.
I have the same problem with my Y669. Left and Rear channel is swapped. What I do is I use the speaker upside down. I just use the included strap as a stopper to prevent the speaker from rolling.
the main speaker/woofer is smaller than i expected no wonder sound is not so loud i thought at least it would be 2 inches you probably have to have passive radiators separately bought from outside because it doesn’t look there’s any other way to fully open it without damaging them if apply heat that will also harm it because it’s made of silicone/rubber and the heat air will probably deform them also as you’ve gone this far you can change the main speakers and use slightly bigger speakers although it could require some extra modifications and i don’t think those batteries are 18650 by the looks of the size they’re probably aa size batteries anyway thanks for your content and i hope you’ll explore this speaker more in future would be helpful for many of us
@@TaylorSoloaiJR yeah i’m sure that’ll be long time from now😂 i’m thinking of swapping the main speakers with my old y200 speakers as that ones sound is clearer might not change sound because of other factors but at least we can try
For me I'd say 10 for good bass, especially for how much it cost. You can buy a JBL GO 3 which is more expensive and it still won't compete with the Awei Y669 in terms of bass.
Impossible cause the wires that conmects to the batteries inside are very hard to reach, you should remove the pr's first before fully tearing down the speaker.
And sir is the cover made out of plastic because I dropped my speaker, it still sounds the same but when I grasp it hard with my hand it makes a cracking noise that's annoying. I'll be relieved if its just the cover that is making the cracking noise. Any tips to make it stop?
does anyone have this problem where the Bluetooth connection is strong indoors and when its outside even a single book in between the speaker and the phone disrupts the connection and ruins the sound quality?
@@TaylorSoloaiJR lakas ng kain sa battery ,pero malakas naman sya , nag try ako mag teardown sa may passive radiator niya ayaw mabuksan kaya wala nalang
If you have a better way on how to remove the passive radiator, let me know.
Put a alcohol like alot and it will sip right into the rubber leave it for 1 to 5 minutes then you hot air gun and the passive radiator rubber can be take down easy by hands
Did you manage to take yours out using this method?
@@TaylorSoloaiJR yep alcohol softens the glue inside the rubber and dont worry thr alcohol will go inside the rubber and after 5 minutes it will soften the glue and heat it up
@@ralseichanuwu is there a way not to use heat gun and only use alcohol? if it can soften the glue we probably don’t have to use heat gun and just apply pressure for opening
@@sakibsarwat5064 you need heat gun or hair dryer to complete the process alcohol cannot help it self alone it needs heat to disipate from the glue also it really depends but you may have a chance on ripping the passive radiator if you force it too . . .
Great to have this kind of reviews, now its its technical. Good job
the speaker is 8 watts x 2 and subwoofer is 15 watts x 1
Is there a way to re-route/swap the front speaker cabling? I observed my Y669 front Left and Right channels configuration seems swapped/flipped?
As long as you can get pass the PR, you can swap it. Just need to get to the amplifier switch the audio wires.
Ohh thanks! You’re correct, I need to open the PRs to fully dismantle the speaker and swap the connectors inside the amp. I didn’t continue further since I don’t want to mess the PRs. Haha! The wires inside front drivers are glued shut.
I’m thinking upgrading the front drivers to a 2 6w full range ones and the 30w for the woofer.
I have the same problem with my Y669. Left and Rear channel is swapped. What I do is I use the speaker upside down. I just use the included strap as a stopper to prevent the speaker from rolling.
what is the title music you use in testing the speaker? Thank you
I found the song using google find a song in the google app here it is: ua-cam.com/video/Jr1O1dDKKfQ/v-deo.html
Hope ur still active and see this
Sir,
My speaker's power button can't work and it doesn't on 😢
What should i do
Have someone replace it
Nice. Thanks for this
the main speaker/woofer is smaller than i expected no wonder sound is not so loud i thought at least it would be 2 inches you probably have to have passive radiators separately bought from outside because it doesn’t look there’s any other way to fully open it without damaging them if apply heat that will also harm it because it’s made of silicone/rubber and the heat air will probably deform them also as you’ve gone this far you can change the main speakers and use slightly bigger speakers although it could require some extra modifications and i don’t think those batteries are 18650 by the looks of the size they’re probably aa size batteries anyway thanks for your content and i hope you’ll explore this speaker more in future would be helpful for many of us
One day the battery will die so I will definitely go all the way through with the tear down.
@@TaylorSoloaiJR yeah i’m sure that’ll be long time from now😂 i’m thinking of swapping the main speakers with my old y200 speakers as that ones sound is clearer might not change sound because of other factors but at least we can try
hello sir! how's the bass of this speaker based on your music taste? please rate the bass of this speaker from 1-10 plsss
For me I'd say 10 for good bass, especially for how much it cost. You can buy a JBL GO 3 which is more expensive and it still won't compete with the Awei Y669 in terms of bass.
@@TaylorSoloaiJR thank you so much sir! I'm planning to buy this speaker soon!
Is it possible to change battery 🔋 of awei y669?
Did you saw what battery it uses?
Sorry didn't get to that part
Hard base any problem speaker?
Hi boss is there a good battery pack of your recommendation for battery replacement? Thanks
Hi, sorry I can't recommend one because I haven't seen the battery for this speaker and I don't have it anymore.
Можно ли добраться до платы, не снимая боковые резинки для басса?
This or xdobo boos bmtl ? I can't make up my mind. can you help me? What i preferred is bass quality
Xdobo is better, in my opinion
@@TaylorSoloaiJR thks I'll buy it on 1.1 sale hahha
Essa caixa tem rádio FM?
Awei vs Zealot, which one is better?
Song name of the sound test
Is therea way how to increase the battery capacity?? Ilike to intall another two 18650 even on the outside 🤔🤔
Impossible cause the wires that conmects to the batteries inside are very hard to reach, you should remove the pr's first before fully tearing down the speaker.
And sir is the cover made out of plastic because I dropped my speaker, it still sounds the same but when I grasp it hard with my hand it makes a cracking noise that's annoying. I'll be relieved if its just the cover that is making the cracking noise. Any tips to make it stop?
You should take the cover off and see if you can just add some super glue to the cracked part.
yo thanks. How do I put it back together again? Do I use glue?
It depends on how bad the damage is, if it's something small maybe glue..
Yea but after I'm done with gluing it how do I put it together again? Can I still reassemble it?
Yes and yes
Adorei o som dessa caixa! muito bom de ouvir!
What the Size all speaker..???
I think the wattage of the rear one are about 20w and the front two ones are 5w each
Wrong you
the front ones are 8w and the back is 15w
Can you compare awei y669 and mifa a10 plus next video
I would have but I no longer have this Awei Y669, sorry.
does anyone have this problem where the Bluetooth connection is strong indoors and when its outside even a single book in between the speaker and the phone disrupts the connection and ruins the sound quality?
Wiahhh I like it♥️
What's the correct watts rating of the 3 speakers?
25 watts mayby 5w x2+15w=25
31 watts peak watts
Nice. May laban itong Awei Y669 vs Tronsmart T7. Mas mahal T7 ng 500 pesos
Cool bro
Bonjour,Comment faire pour en acheter ? Merci.
The speaker wattage is
20w 4 ohms i also teared mine down and it has 20w maybe yours didnt get printed in time😂
Maybe they knew I was going to tear it down so they gave me this 🤣
@@TaylorSoloaiJR yeah hahahaha they dont want you to show the wattage😂
no wonder it drains the batteries fast in my case it’s a power hungry monster let alone 12h i don’t think i get 7h of back up using 60/65% sound
@@TaylorSoloaiJR lakas ng kain sa battery ,pero malakas naman sya , nag try ako mag teardown sa may passive radiator niya ayaw mabuksan kaya wala nalang
Yan din kaya ung Zealot s51??
Bat nakatutok ka sa base dapat ipakita mo rin ung speaker na maliit ung treble at boses
Awei y669 or Awei y280? Naguguluhan parin ako sa dalawa kung alin sa dalawa bibilhin ko. Ano kaya mas sulit?
If you want more bass buy awei y669 if you want more vocals buy awei y280
malakas ang bass ng 668 pero hindi mo pwede itodo. mas maganda ang sound balance ng 280, long battery life pa
Better than JBL and Bose.
Nice speaker for the price
yung y669 ko po nawala po ung bass ano po kya sira ?
Battery.. Series 7.4v 2000mah
saan ba mkabili ng y669 wla ba yan sm store
awei y669
I bought it from shopee
fb page
try to search it...
i bought mine there...
quality...
👍
Ano Po size Ng front speaker
Sorry didn't measure it and I don't have it anymore
there’s no space for modding even 1 inch tweeter😂
The 2 dual speaker have 6 ohms 5w and the subwoofer have 4 ohms 20w 👍
Nope, the two front speakers are 8w while the woofer at the back is 15w
Very big driver
Shout out me at next videooooo
btw 5w *2 15w *1 total of 25w
it's 31w so the front ones are 8w
What should i buy? That y669 or JBL go 3?
It depends on you and what you want. If you want portability with good sound then GO 3, for louder sound and stronger bass then Y669.
@@TaylorSoloaiJR Is awei y669 have a quality sound despite for its price?
@@TaylorSoloaiJR When full volume did it distort?
Watch this video it will answer all your questions
ua-cam.com/video/swgJnml2f-s/v-deo.html
@@TaylorSoloaiJR One more question, for you which one is better Xdobo x8ii or Awei y669? Cause im going to order now online.