I've watched a lot of these CB install vids for JL's and this one by far is the best. I was a radar and UHF/VHF radio tech in the Air Force and my first Job out of the military was a job at a CB shop located in a truck stop. This channel nailed it. Far better routing of the power and antenna coax and proper grounding of both. A bad ground connection on the antenna will prevent proper tuning giving a high standing wave ratio which will impede radio performance and could over time damage the transmitter final output stage of the radio. I will be getting this bar for my JL. Thanks for a great video. You earned another subscriber today.
I received my CB bar yesterday. Installed it today, took about 30 minutes. A rare Jeep project that was easy and exactly like the video. Great product, very happy with it. Thanks
Love all that you and Cindy have done. You two truly make an impact on the Jeep Community. I just ordered The CB Bar and Antenna Mount and am so looking forward to installing it and putting it to use. I found my old trusty Radio Shack CB Radio from back in the 90's. I plan on installing that one with a good antenna. Keep up the good Wayalife!
I know this is a few years old... but fantastic video! I am an engineer and have been putting radios in Jeeps for 35 years (as a hobby). I have lost count of how many radio systems I have 'fixed' for people by simply adding a ground strap to the tailgate or panel the antenna is mounted to. You are going to save a lot of people some frustration of wondering why they can't talk a mile down the road.
This product is top notch, went into our new Rubicon. Managed to install a Yaesu 991a onto the bar weighing in at 9.4 pounds. This requires a substantial bracket however especially for offroad drivers. TY Eddie for this innovative design!
Such a well thought out and designed accessory. Just got mine today for my JLUR. Plus this video makes it a breeze to install. Keep up the great products and vids.
I appreciate the 'additional' information, i.e., wiring up a CB radio. I was able to follow your directions, had the auxiliary futures and tied in as shown! Outstanding.
Thank you! Order the CB Bar love it, everything is up and out of the way, and it is simple and easy to install by following your video... again thank you Wayalife you truly do make a difference.
I'm really impressed with all your builds so far, half of the things I've done to my jeep are from you. Thanks and great job with the educational videos.
Very new to the whole Jeep thing. Bought a JT Rubicon. Ordered a CB Bar. Very nice. High quality. Works exactly as I expected to mount my full size cb up and out of the way. Thanks. Semper Fi.
Probably one of the best instructional videos I have ever watched. What a talent you have for not only making JEEPS cool and functional but explaining the HOW to process with style, brevity and finesse. I am going to tackle this project and will be ordering your CB bar kit. New SUB for sure. JEEP WAVING YA BRO.
Installed my CB Bar today. I installed a smaller profile CB radio. I wasn't able to use the larger holes as indicated in the video but I was able to use the smaller center holes without error. Works and looks great! Can't wait to get the Aux switch plate in! Wayalife - one request. See if you can find a great way to mount a hunting rifle.
The bar I ordered is different than the one you installed. Mine has a gap which made it difficult to mount the cb bracket. It took several washers to fill the gap so the radio would fit in the bracket. Sure would have been easier if the gap didn't exist on the bar.
This video was made over 5 years ago and I have since improved the bar to be a universal accessory bar that can accommodate just about any device. The following is a link to the instructions for it: wayalife.com/threads/acc-bar-jeep-jl-wrangler-jt-gladiator-overhead-accessory-mount-installation.64450/ That said, I am sorry to hear you had difficulties installing your radio. It really is the first time I've heard of anyone having problems but glad that you were able to figure something out.
I installed this in my 2019 Rubicon Unlimited. It was a piece of cake to install. Regarding the wiring, I found a easy grounding spot behind the dash end panel on the passenger side. It is much easier than the large bolt you suggested in your video. Just a helpful hint for the next person.
Nice design and video. One issue I have is, it always gets to me why Jeep accessory kits don't come with all stainless steel hardware. For a couple extra bucks this kit would be perfect and save us a trip to the hardware store.
The hardware provided is zinc plated and I've not heard of anyone having issues with them or at least, when it comes to corrosion. But, I appreciate the feedback and will give this some thought.
Wicked easy install, looks legit in my Mojito! JLU. Rockin' the Wayalife 5" decal on the back quarter window. Yeah it ain't cheap... but you are paying for quality, Made in the USA!, and easy functionality. Cheers on an amazing product!
I received the CB BAR this past Friday, the day after I picked up my JLUR from the body shop for minor repairs from daily driving. I ran your video again on the install of the CB BAR as I didn't see other instructions. Super simple and easy install. It took more time to reinstall the freedom tops as this was my first time having them off. ( I made sure that the logo faced to the back so everyone in the Jeep can see it and I will send the curious to you.) Happy to be back in my Pumpkin Pi. Thanks and God bless.
Sorry about that. These sell about as fast as I can get them made and I keep increasing the batch size. I should have more in by next week. If you've indicated to be notified when they're back in stock, I would recommend you get your order in as quickly as possible.
You might want to put a small piece of vaccum hose where the coaxial cable pops out in front. I had the one on my VHF ground out from rubbing the casing off. Talking on the radio was a joke with it like that. LOL Even some good tape would be enough to protectbit as long as it is watched for rubbing. Love the bar idea! I was thinking of just going with one of the smaller Cobra radio's. Ran a Cobra 19 in a big truck when my radio was in, that little radio was getting out better than the classic sitting beside me. I had matched set of 6' fiberglass whip antenna's that really helped it. The guy with classic wasn't happy, because he was the owner of the little radio I was using...lol
Bought one and recieved the other day. Great Product, Made in USA and very easy Install. Bar Does have some weight which is nice. WayaLife is a great Channel and a very informative Jeeper. I will be buying more stuff. Worth the Money.. If you are on the fence, don't be. Buy it, you will be happy....
Wow another great video! I have a vintage Cobra single side band CB radio and was worried about what I was going to do to install it without damage or having it low with water issues. Your video solved that problem and I plan to do the same wiring on my JLU Rubicon, so good tip about the ground. That is a well engineered mount.
Just installed mine on my jt looks and sits perfect, I needed a spot to install my switch rather then screw it into my plastic and risk wires and damage from hitting bumps. A must have for sure!
Great video, thinking about ordering one for myself. This should still work with a sunrider top, correct? edit: just saw a previous reply that it will, going to order one later today
Thanks for sharing this link to this video today! If I may, I like the product but I think it will have more value if you include a place for the wiring to go through the bar and some wire loom to wrap the wiring. You can do the wiring first and then run it through the bar with a convent exit hole to the radio. Now the windshield can be lowered with no issues.
Actually, you can do that now. The large holes on top of the tube will allow you to run your own wiring through it. There are lots of folks who have done this.
Just finished installing this in my JT. Thank you Eddie for a great Made in the U.S.A. product! I didn't hear it mentioned. Does it work ok with the sunrider? You're the best!
Awesome video!!! Only thing I would add is that you may need to drill out (very slightly) the mounting brackets to accommodate the supplied bolts for Uniden CB's (maybe others?). Great product!
Great video. Ham radios that are remotely mountable I think are the way to go. One only need to study a little bit, and pass a test for the entry level license. One can install the body of the radio in a location that is protected from possible water penetration, as well as out of the field of view. The control head, mic and speaker can then be installed in an accessable location within reach. I use a Lido gooseneck mount that attaches to the seat mounting bolt.. The advantages of amateur radio over citizens band are enormous. They use FM instead of AM, and can run more legal power. They also operate in the VHF/UHF spectrum where there is no band noise. It's a little bit more trouble than a cb radio initially, insofar as the licensing but we'll worth it in the end.
I recently passed my HAM test (Technician)... The proctors encouraged me to try the General test... I had yet to study much for the General and had yet to be able to pass any of the sample General tests that I had taken... Surprisingly, I ended up passing the General... The proctors then encouraged me to take the Extra test also, just for shits & giggles, but since I had not even read the question pool, I had no expectation whatsoever that I might pass it (and I didn't)... My only goal was the Technician, so passing the General was a pleasant surprise... There is FM on CB these days, so that doesn't count as a reason to go the CB route vs the HAM route... The issue is what will you be using the radio for... If you are involved in a group activity (offroad or otherwise), you use whatever they are using... That might be CB, FRS, or GMRS... If you just need the radio because you want to listen to conversations on a long drive or as emergency communications in areas without cellular service, having more options is better and as such, having a radio that can do some of the HAM channels and the CB channels might be something that you would want to look into... The radio that I ordered does 10-12m and if I turn the power all the way down, it is in the legal power range for CB... In a TRUE emergency situation, I'm not going to be concerned about being legal with respect to power or frequencies though... I'm not particularly motivated to talk to random strangers on the radio though... Especially on the HAM or GMRS frequencies where you need to give your FCC call sign and which anyone could look up to find your real name and address on the FCC database... That is a MAJOR security issue as far as I'm concerned... So, I'll just lurk the channels...
There's no need for one on a JK as the install is even easier. You can buy one of these bars for a JK here www.wayalife.com/store/proddetail.php?prod=PARTS-CB-BAR
I have the CB bar installed, Then i put up the radio and try to run the wires like them and can not get the big white fuse to go anywhere. also hard to see how they keep the wires in the channel. Would love to see more detailed video on running the power wires. The CB Bar is great and easy to install.
Hmmmm, in the event the unexpected happens (stuff does occur) that square steel tube could be damaging to ones' forehead. Looks nice - hope I'm wrong about the safety concern.
Yup, "stuff does occur" and there are all kinds of ways one can hurt themselves. If it's a concern of yours, this probably isn't the right solution for you. That being said, it does sit higher up and further away than the sport cage I have installed on my JK and so I'm not too concerned.
If you're really concerned about bumping your head you can get a pool noodle and slice it lengthwise and put it over the bar then you can tape it or wrap it with whatever cloth you want
Looks great and easy to install... couldn't quite make out how close to your head it is... in an accident - or just being thrown around a bit on the trail - does it add additional danger?
The CB BAR itself sits just a little in front of the sun visors. If you hit the sun visors, you'll hit the bar. The size of the radio you mount would be the bigger concern as a full size unit can sit pretty far forward. If you're a tall guy and are concerned about this, I would recommend that you install my switch mount/relocation bracket and use a smaller radio. This will get the radio well out of the way of your head. This video will show you what I'm talking about. ua-cam.com/video/Qi79fJoUqSw/v-deo.html
Thank very much Sir . this is what I needed to know on how install a CB radio to my new jeep. Very helpful and understanding. Thank you again . your video will save me a lot of money ..👍🚙⛺🇺🇸
CB's are the only thing that bug me about the Jeeping community since we picked up our JLU. We've been using GMRS now for three years and it beats CB's out of the water. But every Jeep club or event I've looked up "CB required" uh. :P No bigs however. But I had this same thought, where am I suppose to stuff these things? Great video!
@@wayalife You bet. Furthermore... You are a resourceful fellow with lots of know-how, insight, street credibility and handy with tools. I've admired several of your other videos where you create hand made solutions for things like license plate relocation brackets and bumpers. I'd love to see you come up with some solutions for things like Hi-Lift mounts, rear-section baskets (like Ace Engineering), and Safari frames. The aftermarket is lagging. You don't.
Not sure if someone has mentioned this, but it would be cool to add a few more mount holes that could be used to mount an extra set of rear Jeep grab handles.
Lol I’m 6’5”. Between this and the sound bar and side panel my head would be like a pinball if I were in a accident or roll over! But great innovation and idea!
LOL!! Yeah, I'm only 5'-7" and can see where this could maybe be an issue for a tall guy. That being said, it does sit higher up and further away than the sport cage I have installed on my JK.
HELP!....first of all, your stuff is so helpful! Now...what mounting solution do you recommend if my 2021 Rubicon JLU has the One Touch Power Top? New to off roading. Looking forward to the lifestyle. Just picked up a regular sized CB that I can't seem to find a good place to mount it.
Actually, I have a lot of guys with the power top who have installed this CB BAR. I've been told it takes just a bit more work but that it was otherwise, no problem.
nice video - i know u got a smaller anytone radio , those are ok but you should have went with a President Bill fcc its the same size and just works better as far as controls an volume, no need to mod it either . a much better unit if u ask me good video though !!
I just got a JL as my JKU was totaled. Interested in the CB Bar, but would like to see how you did the coax, antenna mount and power. Love the Cobra 29's (have 2 of em) and would like to put them in the new rig. Video please?
Another great install video! Your new overhead bar looks like an awesome solution. Your videos have been a great inspiration for my own channel. I just wish I could get my videos to look as good as yours.
Love it! Especially when you hit the trail. ;) The JL Journal is awesome! Mounting your cb or where to mount your cb is always one of the first mods to figure out. It’s nice that you’re providing a great solution for folks.
Does the position of the C.B. installed that way cause a problem for us tall guys? Just concerned about the head and C.B. collision on rough terrain I’m 6’2”. I like the idea and installing a C.B. Radio will be a priority once I get my JL. As an over the road truck driver I use a C.B. a lot and will definitely want one in my JL Rubicon.
What I can tell you is that the CB BAR itself sits just in front of the sun visors and at about the same height if not a hair higher. A full size CB might be an issue for you but I know people who've installed more compact models and this might work better for you. IF you have a soft top, you can actually install some CB radios on top of the bar to help offer even more clearance.
Hello, weird question. I installed the cb bar and bracket for cobra 29, but when I was installing the radio I lost one of the thumbscrews. I've contacted cobra but they don't have them in stock. I was wondering if you had some thumbscrews I could order from you. (3, 4, half a dozen) ? Tried Lowes, Amazon, various websites...
Some clear plastic tape would have been good on the roll bar to keep from rubbing the paint off. I got that idea from the spider top that you just installed. As always another great video!!!
The clear tape on the Spiderweb Sunshade install is used to prevent rubbing of the paint due to "movement" of the top. Once bolted on, the CB BAR will NOT move. In other words, clear tape shouldn't be needed. But, if you've got some laying around, I don't think it'd hurt to use :)
I'm brand new to the jeep community. So this may be a stupid question. If I'm riding with the top down do I need to worry about any electronics in the cb getting damaged by the sun?
The sun, no. A sudden and unexpected down pour of rain, maybe. Not all CB's are made the same and some are better at being water resistant than others.
I’m wanting to do this to my not yet bought gladiator and was getting the parts list together. When will the bar and antenna mount come back into stock?
I have a silly question that red/white wire that is direct to battery. when you make that connection that is an always hot wire correct? Do I need to disconnect the battery to be safe or can this be done with the batteries connected. It's always confusing with the secondary battery because if you disconnect the primary you still have juice from the secondary battery right? Sorry just wanted to do this correctly.
Question does that red/white wire stay go on with ignition and off when ignition off ? Please help thanks. Love the ground strap I ordered it. I like your professional work.
@@wayalife AHA... thanks, no i did not. Saw the video using the hardtop, ordered the cb bar and didn't go looking for soft top till i began installing it. Thank you!
Just received my CB bar for my 2018 JKU Rubicon today. Installed it and I'm having a problem. The mounting brackets that bolt to the roll bar andsupport tge bar do not have a downward bend to them ( like the JL ones in the video) and are making contact with my freedom tops. The contact is keeping my freedom tops from compressing the gaskets and making a water/air tight seal.
I'm sorry to hear that you're having a problem with your CB BAR. Unfortunately, I am on my way to Moab now but would be grateful if you could please contact me by email so that I can assist you better.
When installing your cb did you have to modify the cb bracket please ? I have both the cb bar & relocation bracket & the holes don't seem to line up. Thank you for your time.
Depending on the radio you buy, some drilling of the holes in the mount that comes with it may be necessary to widen them or smaller bolts can be used in many cases.
Honestly, for a TJ, you might be well served to install something like a Rock Hard sport cage. That's what we did back in the day and just mounted a CB to it.
So Eddie where did you get the CB bracket that's on the bar itself to mount the CB too? I ordered this setup and if it comes with the bar I didn't receive one or is that something that comes with the CB? Thanks in advance
Not sure what to tell you. The air bag comes out of your steering wheel and the dash. The indicator light you see on the windshield header is just that - an indicator light. That being said, this is just a solution I came up with to satisfy my needs and now made it available to others by request. If you feel this is unsafe, there are other solutions out there you can use instead.
I've watched a lot of these CB install vids for JL's and this one by far is the best. I was a radar and UHF/VHF radio tech in the Air Force and my first Job out of the military was a job at a CB shop located in a truck stop. This channel nailed it. Far better routing of the power and antenna coax and proper grounding of both. A bad ground connection on the antenna will prevent proper tuning giving a high standing wave ratio which will impede radio performance and could over time damage the transmitter final output stage of the radio. I will be getting this bar for my JL. Thanks for a great video. You earned another subscriber today.
Awesome and thank you! 😎
I received my CB bar yesterday. Installed it today, took about 30 minutes. A rare Jeep project that was easy and exactly like the video. Great product, very happy with it. Thanks
Awesome!! So happy that you're happy with your CB BAR :)
Love all that you and Cindy have done. You two truly make an impact on the Jeep Community.
I just ordered The CB Bar and Antenna Mount and am so looking forward to installing it and putting it to use.
I found my old trusty Radio Shack CB Radio from back in the 90's. I plan on installing that one with a good antenna.
Keep up the good Wayalife!
we're flattered to hear you say as much. Thank you.
I know this is a few years old... but fantastic video! I am an engineer and have been putting radios in Jeeps for 35 years (as a hobby). I have lost count of how many radio systems I have 'fixed' for people by simply adding a ground strap to the tailgate or panel the antenna is mounted to. You are going to save a lot of people some frustration of wondering why they can't talk a mile down the road.
Why thank you. Glad you enjoyed the video.
This product is top notch, went into our new Rubicon. Managed to install a Yaesu 991a onto the bar weighing in at 9.4 pounds. This requires a substantial bracket however especially for offroad drivers. TY Eddie for this innovative design!
Awesome! So glad that you're happy with your CB BAR :)
Such a well thought out and designed accessory. Just got mine today for my JLUR. Plus this video makes it a breeze to install. Keep up the great products and vids.
Wow, thank you so much for that! I'm so happy to hear you're pleased with the CB BAR :)
I appreciate the 'additional' information, i.e., wiring up a CB radio. I was able to follow your directions, had the auxiliary futures and tied in as shown! Outstanding.
Awesome! So glad we were able to help out :)
I don’t even have a JL but I find your videos interesting c:
Thank you, we're so glad to hear it :)
Thank you! Order the CB Bar love it, everything is up and out of the way, and it is simple and easy to install by following your video... again thank you Wayalife you truly do make a difference.
Awesome! So happy to hear you like what you got 👍
I'm really impressed with all your builds so far, half of the things I've done to my jeep are from you. Thanks and great job with the educational videos.
Awesome! Thank you and glad to hear it.
I just received my CB bar and antenna mount will be installing this weekend
Awesome!
Very new to the whole Jeep thing. Bought a JT Rubicon. Ordered a CB Bar. Very nice. High quality. Works exactly as I expected to mount my full size cb up and out of the way. Thanks. Semper Fi.
Awesome!! So glad to hear you're happy with it!!
Probably one of the best instructional videos I have ever watched. What a talent you have for not only making JEEPS cool and functional but explaining the HOW to process with style, brevity and finesse. I am going to tackle this project and will be ordering your CB bar kit. New SUB for sure. JEEP WAVING YA BRO.
Thank you, we're truly flattered that you would say as much. We really do appreciate it.
@@wayalife Just ordered my CB bar and antenna tailgate bracket. Thanks JUST EMPTY EVERY POCKET right?
@@SurvivaLust Awesome! I'll be sure to get it shipped ASAP! 👍
A MUCH needed Jeep accessory! Awesome solution, thank you!
Installed my CB Bar today. I installed a smaller profile CB radio. I wasn't able to use the larger holes as indicated in the video but I was able to use the smaller center holes without error. Works and looks great!
Can't wait to get the Aux switch plate in!
Wayalife - one request. See if you can find a great way to mount a hunting rifle.
Awesome! Glad you like your CB BAR.
Will be getting one for my JK. HAM is the method of communication on the Rubicon, and I've been trying to figure out where to mount my FTM-400.
Awesome! Glad to hear it.
That is a very nice, clean, and well thought out install...
Just got my CB Bar, gonna get it installed tomorrow. Your video makes the install a cake walk.
Awesome, so glad to hear it!
Where can i find a cb bar?
The bar I ordered is different than the one you installed. Mine has a gap which made it difficult to mount the cb bracket. It took several washers to fill the gap so the radio would fit in the bracket. Sure would have been easier if the gap didn't exist on the bar.
This video was made over 5 years ago and I have since improved the bar to be a universal accessory bar that can accommodate just about any device. The following is a link to the instructions for it:
wayalife.com/threads/acc-bar-jeep-jl-wrangler-jt-gladiator-overhead-accessory-mount-installation.64450/
That said, I am sorry to hear you had difficulties installing your radio. It really is the first time I've heard of anyone having problems but glad that you were able to figure something out.
I have a soft top where can I install my cb? Right after I posted this you answered my question. Amazing
Glad our video was helpful to you. I should note that the CB BAR has been improved since this video and it is now a universal accessory mount.
Where can I order this from ? Didn't find it on Amazon.
You can order one from here wayalife.com/store/proddetail.php?prod=PARTS-CB-BAR
Yeah... I stumbled across your videos by accident, and now I am hooked... and I don't have a Jeep. Thinking, thinking...
Awesome!! So glad to hear it :)
I finally got my Jeep!!!!! WooooHooooo let the customizing begin!!!!!
Congratulations to you!
I installed this in my 2019 Rubicon Unlimited. It was a piece of cake to install. Regarding the wiring, I found a easy grounding spot behind the dash end panel on the passenger side. It is much easier than the large bolt you suggested in your video. Just a helpful hint for the next person.
Awesome and thank you for the tip!
Nice design and video. One issue I have is, it always gets to me why Jeep accessory kits don't come with all stainless steel hardware. For a couple extra bucks this kit would be perfect and save us a trip to the hardware store.
The hardware provided is zinc plated and I've not heard of anyone having issues with them or at least, when it comes to corrosion. But, I appreciate the feedback and will give this some thought.
Wicked easy install, looks legit in my Mojito! JLU. Rockin' the Wayalife 5" decal on the back quarter window. Yeah it ain't cheap... but you are paying for quality, Made in the USA!, and easy functionality.
Cheers on an amazing product!
Awesome! So glad to hear you're happy with your CB BAR 👍
Just saw this video this morning. I like this install, and ordered it a few minutes ago for my JLUR
Awesome, glad to hear you liked the video and that you placed an order for a CB BAR :)
I received the CB BAR this past Friday, the day after I picked up my JLUR from the body shop for minor repairs from daily driving. I ran your video again on the install of the CB BAR as I didn't see other instructions. Super simple and easy install. It took more time to reinstall the freedom tops as this was my first time having them off. ( I made sure that the logo faced to the back so everyone in the Jeep can see it and I will send the curious to you.) Happy to be back in my Pumpkin Pi. Thanks and God bless.
Don Jernigan so glad to hear you’re happy with our CB BAR 👍🏻
Just installed my bar, very nice. Thank you for the vid and great bar!
Awesome! Glad you're happy with it 👍
Been waiting for someone to come up with a great idea and solution for radio and antenna mount. Thank you!
Glad to hear you like what you see :)
Well had one in my shopping cart went to check out and it was out of stock again. They must be very popular.
Sorry about that. These sell about as fast as I can get them made and I keep increasing the batch size. I should have more in by next week. If you've indicated to be notified when they're back in stock, I would recommend you get your order in as quickly as possible.
I have one of these and it is killer! Thanks for the video.
Awesome! Happy to hear you like it 👍
Fantastic video!!! We are ordering a CB Bar from you this Friday!!!! Great product!!!!!👍😎🇺🇸
Awesome - glad to hear it!
You might want to put a small piece of vaccum hose where the coaxial cable pops out in front. I had the one on my VHF ground out from rubbing the casing off. Talking on the radio was a joke with it like that. LOL Even some good tape would be enough to protectbit as long as it is watched for rubbing. Love the bar idea! I was thinking of just going with one of the smaller Cobra radio's. Ran a Cobra 19 in a big truck when my radio was in, that little radio was getting out better than the classic sitting beside me. I had matched set of 6' fiberglass whip antenna's that really helped it. The guy with classic wasn't happy, because he was the owner of the little radio I was using...lol
Subscribe my channel : bom.to/cRD6d
Bought one and recieved the other day. Great Product, Made in USA and very easy Install. Bar Does have some weight which is nice. WayaLife is a great Channel and a very informative Jeeper. I will be buying more stuff. Worth the Money.. If you are on the fence, don't be. Buy it, you will be happy....
Thank you so much for the kind review. We're so happy to hear you like your CB BAR and that you enjoy our channel. 😎
Wow another great video! I have a vintage Cobra single side band CB radio and was worried about what I was going to do to install it without damage or having it low with water issues. Your video solved that problem and I plan to do the same wiring on my JLU Rubicon, so good tip about the ground. That is a well engineered mount.
Just installed mine on my jt looks and sits perfect, I needed a spot to install my switch rather then screw it into my plastic and risk wires and damage from hitting bumps. A must have for sure!
Awesome! Happy to hear you're happy with yours and that it helped to provide a way to mount up your switches.
Great video, thinking about ordering one for myself. This should still work with a sunrider top, correct?
edit: just saw a previous reply that it will, going to order one later today
Yes, it will work with a Sunrider and glad to hear you'll be ordering one :)
Nice work, Eddie and Cindy. Good stuff.
Thanks! :)
Thanks for sharing this link to this video today! If I may, I like the product but I think it will have more value if you include a place for the wiring to go through the bar and some wire loom to wrap the wiring. You can do the wiring first and then run it through the bar with a convent exit hole to the radio. Now the windshield can be lowered with no issues.
Actually, you can do that now. The large holes on top of the tube will allow you to run your own wiring through it. There are lots of folks who have done this.
@@wayalife Nice! Then great job all around!
Just finished installing this in my JT. Thank you Eddie for a great Made in the U.S.A. product! I didn't hear it mentioned. Does it work ok with the sunrider? You're the best!
Happy to hear that you're happy with your CB BAR! Yes, it will work with a Sunrider and it installs just like you would for a soft top.
Awesome video!!! Only thing I would add is that you may need to drill out (very slightly) the mounting brackets to accommodate the supplied bolts for Uniden CB's (maybe others?). Great product!
Great video. Ham radios that are remotely mountable I think are the way to go. One only need to study a little bit, and pass a test for the entry level license.
One can install the body of the radio in a location that is protected from possible water penetration, as well as out of the field of view. The control head, mic and speaker can then be installed in an accessable location within reach.
I use a Lido gooseneck mount that attaches to the seat mounting bolt..
The advantages of amateur radio over citizens band are enormous.
They use FM instead of AM, and can run more legal power. They also operate in the VHF/UHF spectrum where there is no band noise. It's a little bit more trouble than a cb radio initially, insofar as the licensing but we'll worth it in the end.
There are tons of people who have installed this CB BAR to run a HAM.
I recently passed my HAM test (Technician)... The proctors encouraged me to try the General test... I had yet to study much for the General and had yet to be able to pass any of the sample General tests that I had taken... Surprisingly, I ended up passing the General... The proctors then encouraged me to take the Extra test also, just for shits & giggles, but since I had not even read the question pool, I had no expectation whatsoever that I might pass it (and I didn't)... My only goal was the Technician, so passing the General was a pleasant surprise...
There is FM on CB these days, so that doesn't count as a reason to go the CB route vs the HAM route...
The issue is what will you be using the radio for... If you are involved in a group activity (offroad or otherwise), you use whatever they are using... That might be CB, FRS, or GMRS... If you just need the radio because you want to listen to conversations on a long drive or as emergency communications in areas without cellular service, having more options is better and as such, having a radio that can do some of the HAM channels and the CB channels might be something that you would want to look into... The radio that I ordered does 10-12m and if I turn the power all the way down, it is in the legal power range for CB... In a TRUE emergency situation, I'm not going to be concerned about being legal with respect to power or frequencies though...
I'm not particularly motivated to talk to random strangers on the radio though... Especially on the HAM or GMRS frequencies where you need to give your FCC call sign and which anyone could look up to find your real name and address on the FCC database... That is a MAJOR security issue as far as I'm concerned... So, I'll just lurk the channels...
Very detailed video Eddie and Cindy wish there was a video this detailed on a JKU.
There's no need for one on a JK as the install is even easier. You can buy one of these bars for a JK here www.wayalife.com/store/proddetail.php?prod=PARTS-CB-BAR
Nice well thought out design and install. Good job.
Thank you, I really do appreciate it :)
I just ordered and installed this bar last week, it truly is as easy and amazingly simple as advertised. Keep up the awesome work!
Awesome! So glad to hear it :)
I have the CB bar installed, Then i put up the radio and try to run the wires like them and can not get the big white fuse to go anywhere. also hard to see how they keep the wires in the channel. Would love to see more detailed video on running the power wires. The CB Bar is great and easy to install.
Thomas Simpkins what radio did you go with? It looks like the radio blocks rear view mirror?
@@bradgerttula3900 I have the one they show in the video, it does not block the rear view mirror.
Hmmmm, in the event the unexpected happens (stuff does occur) that square steel tube could be damaging to ones' forehead. Looks nice - hope I'm wrong about the safety concern.
Yup, "stuff does occur" and there are all kinds of ways one can hurt themselves. If it's a concern of yours, this probably isn't the right solution for you. That being said, it does sit higher up and further away than the sport cage I have installed on my JK and so I'm not too concerned.
If you're really concerned about bumping your head you can get a pool noodle and slice it lengthwise and put it over the bar then you can tape it or wrap it with whatever cloth you want
Looks great and easy to install... couldn't quite make out how close to your head it is... in an accident - or just being thrown around a bit on the trail - does it add additional danger?
The CB BAR itself sits just a little in front of the sun visors. If you hit the sun visors, you'll hit the bar. The size of the radio you mount would be the bigger concern as a full size unit can sit pretty far forward. If you're a tall guy and are concerned about this, I would recommend that you install my switch mount/relocation bracket and use a smaller radio. This will get the radio well out of the way of your head. This video will show you what I'm talking about. ua-cam.com/video/Qi79fJoUqSw/v-deo.html
Ordered a custom JT this week. When it comes in, I’ll be ordering one of these for my radio. Awesome product.
Awesome! Happy to hear you're liking this :)
Beautiful. You sir are a genius. Will be ordering the bar very soon.
LOL! Thank you
That is a fantastic product! It is going on my list of future purchases!
Thank you!
Awesome! So glad to hear you approve of my design :)
Thank very much Sir . this is what I needed to know on how install a CB radio to my new jeep. Very helpful and understanding. Thank you again . your video will save me a lot of money ..👍🚙⛺🇺🇸
So glad to hear we could be of help to you.
CB's are the only thing that bug me about the Jeeping community since we picked up our JLU. We've been using GMRS now for three years and it beats CB's out of the water. But every Jeep club or event I've looked up "CB required" uh. :P No bigs however. But I had this same thought, where am I suppose to stuff these things?
Great video!
LOL - I call it a CB BAR but really, you can mount whatever you want to it. I've seen lots of guys mount ham or a race radio to it :)
Awesome. Just ordered for my JL 2DR Rubicon.
Glad to hear it :)
@@wayalife You bet. Furthermore... You are a resourceful fellow with lots of know-how, insight, street credibility and handy with tools. I've admired several of your other videos where you create hand made solutions for things like license plate relocation brackets and bumpers. I'd love to see you come up with some solutions for things like Hi-Lift mounts, rear-section baskets (like Ace Engineering), and Safari frames. The aftermarket is lagging. You don't.
Any estimate when back in stock? Love the ARB compressor firewall mount, fills the wasted space perfectly on my Mojave....
I should have more in stock next week but they are selling quickly.
Not sure if someone has mentioned this, but it would be cool to add a few more mount holes that could be used to mount an extra set of rear Jeep grab handles.
Idk if you have the mopar grab handles or not but they won’t interfere much with them if that’s what ur talking about
Great add-on for my CB radio! Nice and clean! Curious, will this also work with the Mopar Front Grab Handles?
I have had people make it work but you need to use some washers to help clear them.
Lol I’m 6’5”. Between this and the sound bar and side panel my head would be like a pinball if I were in a accident or roll over! But great innovation and idea!
LOL!! Yeah, I'm only 5'-7" and can see where this could maybe be an issue for a tall guy. That being said, it does sit higher up and further away than the sport cage I have installed on my JK.
Hi.. Bro. All your posts were superb.. . I love wrangler.. I seen all your posts.. I would love to see roll bar installation..
You mean like this ua-cam.com/video/38kHbh6h5XQ/v-deo.html
🎈🎉🎊🚙 Congratulations For Another New Installation In The Jeep , JEEP FOREVER 🚙 OIIIIIIIO 🚙❤🚙 👍
That was a great video. Thank you, I'm going to look and try to find that bar for my jk. Thanks again.
You can buy one for a JK here: www.wayalife.com/store/proddetail.php?prod=PARTS-CB-BAR
HELP!....first of all, your stuff is so helpful! Now...what mounting solution do you recommend if my 2021 Rubicon JLU has the One Touch Power Top? New to off roading. Looking forward to the lifestyle. Just picked up a regular sized CB that I can't seem to find a good place to mount it.
Actually, I have a lot of guys with the power top who have installed this CB BAR. I've been told it takes just a bit more work but that it was otherwise, no problem.
nice video - i know u got a smaller anytone radio , those are ok but you should have went with a President Bill fcc its the same size and just works better as far as controls an volume, no need to mod it either . a much better unit if u ask me good video though !!
Nice job Eddie doesn't get any more in-depth than that.
Thank you. Just wanted to make sure people could see how easy my CB BAR is to install and how well it works :)
I have your bar...its excellent, thank you. You should sell those brackets for mounting the antenna.
Thank you and I've had a lot of requests for them. I'm working on it now. :)
Where did you mount your antenna for the JT? Im thinking bout buying the radio mount, but cant find a good antenna mount. Hood? Bed? A pillar?
@@JTjitsu I mounted my NNO on an Amazon light mount at the back of the hood near the windshield. Folded the windshield down and ran the coax.
That was a thing of beauty and also great info on the grand strap too for folks he didn't know about that whole annoying grounding thing.
Thanks! I think a good ground or the lack there of is the biggest reason why people seem to think CB radios don't work well.
I just got a JL as my JKU was totaled. Interested in the CB Bar, but would like to see how you did the coax, antenna mount and power. Love the Cobra 29's (have 2 of em) and would like to put them in the new rig. Video please?
OK I;m a dumba$$ forgot this video. You did it for me DUH
LOL - glad you got it figured out :)
Another great install video! Your new overhead bar looks like an awesome solution. Your videos have been a great inspiration for my own channel. I just wish I could get my videos to look as good as yours.
I know that I have followed several of his install videos myself. Always looking forward to the next video.
Eddie and Cindy have probably sold more Jeeps with their videos than my local dealership has. They are good people.
No doubt!
Really nice understanding everything actor your video easy install thanks!!!
Glad to hear it! :)
Great product. I need one. went to place an order but these are out of stock. Any idea when these will be available ?
Yeah, sorry for being out. They've been selling like crazy lately. Should have more in and ready to ship in about a week.
Delivered today thanks again ✌️🇺🇸
Awesome! Glad to hear you got it! 👍
Love it! Especially when you hit the trail. ;) The JL Journal is awesome! Mounting your cb or where to mount your cb is always one of the first mods to figure out. It’s nice that you’re providing a great solution for folks.
Thanks Rachel. Hoping we can help others out with this CB BAR :)
Exactly what I am looking for! Thanks for the great video.
Awesome, glad to hear it :)
Does the position of the C.B. installed that way cause a problem for us tall guys? Just concerned about the head and C.B. collision on rough terrain I’m 6’2”. I like the idea and installing a C.B. Radio will be a priority once I get my JL. As an over the road truck driver I use a C.B. a lot and will definitely want one in my JL Rubicon.
What I can tell you is that the CB BAR itself sits just in front of the sun visors and at about the same height if not a hair higher. A full size CB might be an issue for you but I know people who've installed more compact models and this might work better for you. IF you have a soft top, you can actually install some CB radios on top of the bar to help offer even more clearance.
Hello, weird question. I installed the cb bar and bracket for cobra 29, but when I was installing the radio I lost one of the thumbscrews. I've contacted cobra but they don't have them in stock. I was wondering if you had some thumbscrews I could order from you. (3, 4, half a dozen) ? Tried Lowes, Amazon, various websites...
Truck stops, best resource for cb's.
Some clear plastic tape would have been good on the roll bar to keep from rubbing the paint off. I got that idea from the spider top that you just installed. As always another great video!!!
The clear tape on the Spiderweb Sunshade install is used to prevent rubbing of the paint due to "movement" of the top. Once bolted on, the CB BAR will NOT move. In other words, clear tape shouldn't be needed. But, if you've got some laying around, I don't think it'd hurt to use :)
@@wayalife thanks for the reply! That is a good point! Thanks
Subscribe my channel : bom.to/cRD6d
Great video my friend. I have a Sky One Touch Power Top. What kind of solution is there? Greetings from Germany.
I've had a lot of customers with one install the CB BAR. I've been told it just take a bit more work to make it happen.
I'm brand new to the jeep community. So this may be a stupid question. If I'm riding with the top down do I need to worry about any electronics in the cb getting damaged by the sun?
The sun, no. A sudden and unexpected down pour of rain, maybe. Not all CB's are made the same and some are better at being water resistant than others.
I’m wanting to do this to my not yet bought gladiator and was getting the parts list together. When will the bar and antenna mount come back into stock?
They are in stock now but I am currently out of town. I should be back on Wednesday and they will be available again then.
I have a silly question that red/white wire that is direct to battery. when you make that connection that is an always hot wire correct? Do I need to disconnect the battery to be safe or can this be done with the batteries connected. It's always confusing with the secondary battery because if you disconnect the primary you still have juice from the secondary battery right? Sorry just wanted to do this correctly.
You will be fine without it but when if in doubt, it never hurts to disconnect.
Question does that red/white wire stay go on with ignition and off when ignition off ? Please help thanks. Love the ground strap I ordered it. I like your professional work.
As I have it wired up in this video, yes. That wire is direct to battery and it stays on even with the ignition off.
Thanks so much you are AWESOME!!!!
How do you mount the CB Bar on a soft top JL (2022) with door surrounds plugging the rollbar holes?
Love your stuff... Thanks!
Did you not watch the video? ua-cam.com/video/8J-CEYysATY/v-deo.html
@@wayalife AHA... thanks, no i did not. Saw the video using the hardtop, ordered the cb bar and didn't go looking for soft top till i began installing it. Thank you!
Nice Job!!
Glad you like what you see :)
Just received my CB bar for my 2018 JKU Rubicon today. Installed it and I'm having a problem. The mounting brackets that bolt to the roll bar andsupport tge bar do not have a downward bend to them ( like the JL ones in the video) and are making contact with my freedom tops. The contact is keeping my freedom tops from compressing the gaskets and making a water/air tight seal.
I'm sorry to hear that you're having a problem with your CB BAR. Unfortunately, I am on my way to Moab now but would be grateful if you could please contact me by email so that I can assist you better.
@@wayalife left a message in the contact portion
It was a pleasure talking to you today :)
Ditto
When installing your cb did you have to modify the cb bracket please ? I have both the cb bar & relocation bracket & the holes don't seem to line up. Thank you for your time.
Depending on the radio you buy, some drilling of the holes in the mount that comes with it may be necessary to widen them or smaller bolts can be used in many cases.
Have you thought of a double mount? CB/HAM radio side by side?
I have but the cost of steel is already making it hard to keep costs down. Most people just drill extra holes to make it work.
I hope you will be making the mount for tj's and other models.
Honestly, for a TJ, you might be well served to install something like a Rock Hard sport cage. That's what we did back in the day and just mounted a CB to it.
Damn that is cool. Great job.
Thank you, glad you like what you see 😎
Where do you recommend to install the antenna for a gladiator?
I dont have my JT yet, but im thinking about doing this
Awesome! 👍
Do you have anything for installing a GMRS radio in a side by side?
Sorry, just Jeep stuff.
I can’t carry the cross member home to England but I’d buy the two end mounting brackets while I’m in Florida
So Eddie where did you get the CB bracket that's on the bar itself to mount the CB too? I ordered this setup and if it comes with the bar I didn't receive one or is that something that comes with the CB? Thanks in advance
The CB Bracket comes with the CB radio.
Awesome thank you kind sir
When do you think you’ll have the CB Bar back in stock for JLU?
Ordered.
Nice clean install.
Thank you :)
Looks like a great product - Can the sun visors be rotated to the side with the bar installed?
Yup. The CB BAR does not obstruct or prevent any of the OE features on the JL/JT from working.
which sun shade is that and can you still close the roof with it still on.... sorry for the stupid question. im new to the new jeep life.
Spiderweb Shade and yes, you can still put the hard top on with it in place.
Will this work with a micro mini MIDLAND GMRS MXT275 ? Where do I purchase a CB Bar? What is the cost? TYIA
I see no reason why it wouldn't work and you can buy one here wayalife.com/store/proddetail.php?prod=PARTS-CB-BAR
Nice Idea! However, I have concerns about interference & safety during possible Air Bag deployment. Please address.
Not sure what to tell you. The air bag comes out of your steering wheel and the dash. The indicator light you see on the windshield header is just that - an indicator light. That being said, this is just a solution I came up with to satisfy my needs and now made it available to others by request. If you feel this is unsafe, there are other solutions out there you can use instead.
I just received my bar man talk about beefy it looks great and high quality will be installing it tomorrow thanks
Awesome! So glad to hear you're happy with your CB BAR :)
Hello can the cb bar be used with the sky one touch top?
Yes.
The pink white to my knowledge is a 10amp. my radio has a 15amp fuse would my radio potentially pull to much power for that cable (FTM 300dr)