I got sick of the glare of the stock screen protector so I decided to replace it with a 25 percent anti glare from photodon and heres how it went. www.photodon.com
I had no idea that my Cintiq Companion 2 had a screen protector on it.. there's tons of scratches from my pen, which I figured were on the actual screen, so I called Wacom and they said it would cost over $600 to replace the screen. I looked in the description of the device and there's no mention of it coming with a screen protector. Thanks for the video! You saved me tons of money haha
@@TabletOsxBay hello, i know that this is an old video but i need help. I accidentally scratched my wacom screen, (very very tiny scratches) but i don't know if my wacom already has a screen protector. (because it's really hard to tell) I mean, does a wacom tablet come with a screen protector already placed on it? Or i scratched my real screen?
@@Acme_the_rubberhose_dog what product do you own? A good amount of them do have screen protectors, i think aside from the newest ones with etched glass which i havent seen. Also if the etched glass looks anything like their old screen protectors I would send that shit back from day one. I like having the option to take it off and replace it with a clearer option. To tell if yours has a screen protector look at the edges of the screen, if there is a sliver of shiny screen at the very edge chances are it has a screen protector, also you can usually use your finger nail to feel for an edge to the screen protector. Again tell me what device it is and I will try to help you find out. Also if you fuck yours up its not my fault. :D
Hi, I wanted to say thanks for this video. My Cintiq Companion Hybrid was awful. Seriously, it looked incredibly blurred in the middle of the screen at the point that when I really needed to see something sharp, I used another part of the screen. I followed this procedure and it was perfect. 1) Taking out the old screen protector was much easier than what I expected. I removed the corners with my fingernails, didn't need to use any tool. Then I just took my time to remove it completely. 2) Putting the new screen it was the most difficult part, but if you follow this video it is very easy and 0 bubbles will remain. The result is incredible. Seriously. I feel like I was blind. THANKS!
Wait so the 13 hd does comes with a small layer of film as well? Because everywhere i have been looking says it has no protection. i compared it to my friends cintiq hybrid and it felt and looked the same but i wasn't sure...
do you know if the new cintiq 16's allso have that kind of removable layer on them or not?... i just got a scratch and wacom support said they wouldn't RMA it :/. Really awesome Vid btw really understandable and clear :)
Hey thanks! sorry to hear about your device, im not certain because I havent worked on any of this for a while but I have heard it has "etched glass" which afaik means the texture is literally etched into the glass, they probably did this with newer models because they were sick of me helping people fix theirs and making it look better, haha. All joking aside I will look into it for you, but you can try to check for yourself by looking at the edge of the screen to see if there is a little shiny lip, or around the camera hole if there is one. You should then be able to pick at it with your finger nail. I will see if i can find a better more definitive answer, please let me know if you do the same!
@@zuzem1 They do. I just scratched my new 16 inch (not the "pro" version. The 800$ one) and have to remove the factory layer just like my old 13in hybrid. I used a thin exacto knife to peel up the corners, and just like this video it should remove the same. Seems like wacom cheaped out on the nibs/screens, because I didn't have to do this with my old 13in hybrid till after 3 years. It's only been 2 months with my 16 inch, and already have to replaced the nibs and screen. Oh well.
Thank man, the instructions I got from the screen protector were stupidly confusing! I still got some little bubbles, but at least I didn't throw 16 bucks into the bin
Hi Again.. Ok.. You are so right... I have been using the Companion 2 to make Virtual Reality games but when I was watching the premiere of Big Brother UK, it looked ... Really grainy.. Now I can't stop seeing it! I'm just going to go ahead and order the one you got. 'clearly' you would have picked an appropriate replacement. Glad I found this again. I don't think you need to heat it,.. I just tried the corner of mine and it comes right up... I plan to use lateral force only, and as you found, work out to in, in waves,..
the Screen protector is on every Wacom ? i use a cintiq 16, and i dont know if i can change my screen like u, the SAV say : u need to pay 300€ for change ur screen ... T_T need u pls ! and really thanks for this great tuto !!!!!
Thanks for this helpful video! I have the Cintiq 16 (non pro) and I’ve only been using it for a couple months, but it seems my pen nib has already scratched it. Am I able to put a photodon screen protector over the existing one? I’m worried about voiding the warranty of the tablet.
My Wacom Cintiq 16 come with stains on the factory screen protection. And i don't know if I can remove it ? The protection is very very strong glued. Is this the same problem as your?
Can you give me the model number? Or send pics? What kind of staining? If it's a newer model i think they have etched glass which is non removable. But if it's a stain you should be able to clean it with a solvent.
I've got the MXH 25 for my faithful 12WX, but I haven't worked up the courage to go through with it. The stock is pretty scratched up after 7 years of use but I can't help but think it's a minor nuisance compared to a potential mishap during the swap. I'm going to wait.
You're one heck of a brave man! I've been looking for over a year for some info about this. I have the companion and since the first day I wondered what would I do the day the screen got scratches and stuff on it. Today is the day! I'm taking that stock protector off! How has the new screen been working for you? I'm very curious about the whole "color improvement" you mention. Is it really that noticable??
+NaonBlake Sorry I was away a bit. Yes it makes a world of difference! I love the new screen protector and it fits like the stock one. The difference mainly is clarity. No more ugly rainbow grain. Did you do it? You will be glad you did.
+The CG Alchemist I did it, but I didn't have the right screen protector to replace it, so now I can see the streaks of light on the screen (in a white backgrounds, mostly, but still) 'cuz my new screen protector is a clar one, very thin and with no antiglare. It's a bit annoying, tho the colors are brighter and look a lot better. The stock film was.. pretty bad, to say the least. I ordered the same screen protector from photodon you did, and now I'm still waiting (I live in Chile lol), but I have high hopes. I hadn't realized how much I hated the rainbow grain thing until it was gone, so now I mostly need patience lol Thank you for your answer!
Awesome! congrats on the change! Yeah my OCD made me hate the original screen protector. The one from photodon is great because its a lot like the original in anti glare and paper feel without the grain!
Yeah, right now it's like drawng on glass! When I ordered the wrong screen protector it was around the time the companion came out and no one really sold screen films specifically for it. I didn't know better lol So I hope the photodon one will be great. Right now the screen looks almost like a mirror when it's off lol I'm crossing my fingers that the streaks of light will vanish with the new film. Comparing the stock film with the one I have right now, it was 10 times ticker, so that's probably why I see them now, but still. I'm a paranoid c: Thanks for your reply!
The other day I let my mother draw on the Companion and I didn't notice that she was wearing watch... yes, the screen got scratched. Quite noticeably. She didn't do anything she wouldn't do with her iPad, but of course... it's not an iPad, though it's much more expensive. It's frustrating 'cause I'm always so careful using and handling this device, and in 5 minutes it can get ruined... I'm relieved to see this video. I've ordered the same MXH protector from Photodon and will receive it in 2-3 weeks. I should have done this the first instant I ordered the Cintiq, but I didn't imagine the screen was so damn sensitive. Now I'm debating if I should remove the original protector or just stick the new one on top. I've heard that the warranty doesn't cover this kind of damage, that they charge 200 or 600 bucks to replace the whole screen. I have to call Wacom about this yet. It's shameful that they talk about "protecting your investment" during 4 years with a CarePack, but don't actually do a thing or take responsibility for their easily damageable screens. If the sample looks fine over the scratches, I'll stick it on top, or even, I'll pay the repair, and immediately cover it when it comes back. Or even, what the hell, I'll just remove the original protector and screw Wacom and their CarePack -and possibly myself. In the video the new protector looks better than the original, so I hope to end up with an even better Cintiq..!! I'm crossing fingers. Anyway, it's sh*itty from Wacom's part, for 2 grand one expects the screen (which is all it's worth) to be more durable than this.
I fully agree. I love my cintiq but it has some major short comings. The terrible stock screen protector, the performance and the battery life. If I were you I would swap out the stock protector all together. You would be really impressed by how nice the screen actually is without all the grain. Glad the video helped give you hope if nothing else. let me know what you decide to do and how it turns out.
Hey thanks for the advice! The video did help a lot, I just wish it wouldn't void the warranty removing the original protector. I don't know for sure, but I guess it will. I'll let you know
Hey, I changed the protector today. Finally I got rid of the scratches. Also the image is more crisp now, compared to the "grainy" stock protector. I got a bit of lint here and there, but overall it went fine. I can always change it again. Thanks for the video, it was very helpful!
Hi I have a cintiq 16 ( not the pro version) and I utterly dislike the sound it makes ..it's like a using a dry felt tip or a dry marker on a paper ,although the pen itself is smooth but I hate the sound it makes ..is it possibly due to the stock screen protector? .I tried to feel it on the edges but isn't sure is there is screen protector. I tried removing or feeling using my finger nail but it isn't coming off ,thus making me unsure if there is a screen protector. I think it s not etched glass which I think Wacom given in pro models .. please suggest.
for some reason I feel like most of the new products have etched glass which would be a shame. Can you link me to the specific model? If there is a screen protector there will be a slight gap around the edge where you can see the shinny glass beneath, id say a fraction of a mm. Is the clarity of the screen grainy?
@@vikasupadhyay1398 awesome! congrats, wacom screen protectors have been shit in general. I wouldnt use it until you get a screen protector however, in fear of scratching it. But thats up to you.
il faut pulvériser un peu d'eau savonneuse comme pour les stickers et essuyer l'eau coule en dehors vous aurez moins de bulles et moins de poussières qui viendront avec l'eau
hey, great vid thanks. Considering doing this for my Cintiq 13HD (somehow got scratched in my bag, gutted), its got some serrated marks and one gouge maybe 1/4 of a millimetre in depth. Should I try putting a protector on top and see if it seals it? just so annoying running the pen over it, but dont want to replace if Im likely to get air bubbles anyway. very on the fence about it, any advice? Thanks man!
Thanks for your video, I couldn’t find any protection screen for my tablet! I just have a question, the touch texture is the same or is it smooth? Sorry for my english i'm french :S
+Zak Ross Hey sorry i didnt see your comment until just now. What are your doubts? What do you normally use? Whats your profession? I guess the choice really depends on a lot of things. I think a surface would suffice for many and the portability is great, however you cant hackintosh it and have it as compatible (pen/touch etc.). Also the cintiq pen experience is hands down the best. So id say if youre a hobbyist maybe not necessary but if you do this for a living id say go for it. Especially now that the screen looks so great! :D
+The CG Alchemist I'm a motion designer actually. I typically use a wacom intuous pro at home & in the office. I figured having this would help during my 1hour long train ride to work everyday. At least I could get some stuff done. But when I heard about the fan noise issue I was abit dissapointed. Do you have any problems so far now that you hacked it to run a mac? I'm actually ok with either windows or mac.
+Zak Ross well if you're used to wacom pro level stuff you would feel right at home with this. But portability wise you might want to see what the next surface has to offer. as for running osx, it doesn't make much difference performance wise. fan noise is really only a problem in very quiet environments. I couldn't even hear it when I was in a coffee shop.
Hi... great video. Have any idea if this same technique would work on an older Cintiq 21UX? My screen is pretty scratched up, especially in the center where I work the most... it is to the point where I can feel it on the pen nib. I see a lot of other commenters have mentioned other devices. I'm guessing my 21UX is removable too. Any thoughts would help. Thanks in advance.
I've not really had any issue with the stock screen but sadly it has gotten to the point that there's a large splotch around the middle where I've scribbled at the most, and then the area around it is also showing a faint wear
OMG watching this gives me the heeeeebie-jeeeebuies lol. i was totally cringing at 1:32 lol the razor blade initial separation of the protector..... hahahaha
+The CG Alchemist i just removed mine!! holy shit man it looks so much better. that stock screen protector was crap. i bought a panzer glass for mine.i will let you know if its cool. i like the color vibrancy as well. so back to the ram upgrade the CPU look like it can support a 1666 MHZ why did you stick with the 1333.
+CTS I don't remember exactly. Maybe I was trying to match the stock. or I was just really excited and didn't check. Haha. But yeah the screen looks so much better right?! It's actually really beautiful.
+CTS I know, it really bothers me that wacom uses such shit screen protectors when there are way way better ones by photodon. Did you put a new one on? the one I used had the same texture of the stock so it felt like paper to draw on but was clear in comparison.
I know this is super late but im pretty sure the new line has etched glass which, as far as i know, means the glass itself has a texture and no screen protector but im not 100 percent certain. Did you ever find out?
Interesting video...Did you had any inconvenience with the touch functions? I heard that putting a protective film on the screen could make the 'touch' unusable(I don't know if there are better brands or not).
So I just bought the wacom cintiq 22hd and was looking at getting a screen protecter for it. Do they all come with one installed? if so I will hold of on getting a screen protector.
I have a colored scratch on my Cintiq 13 HD. I cant feel it to the touch, the nub of my pen goes over it smoothly, it doesn't appear to be growing, or doing anything untoward, but in the scratch pink and green light kind of flickers depending on the angle. I'd be curious to know how anybody would tackle this problem? The tablet had a long life before it found its way into my hands, bought it used, and id like to know what this colored scratch is and what if anything I can do about it. My first and best bet is to throw a screen protector on top of it and hope that levels out the visual imperfection and reinforces anything that might be weakening, but I'd appreciate any advice anyone might have.
Hello friend! Greetings from Ecuador. I'm planning to buy a wacom cintiq 16 in USA, and all related stuff to use it, including a screen protector. Do you know if Wacom Cintiq comes with a screen protector in it? I have read in many forums that scratches appear in screen, even with few use, so I want to protect it as much as I can. Thanks in advance
the hole part arround the camera has gotten any dirt around the edges, or between the border of the protector and the inner frame of the tablet? any difference on the paper feel
+johnny ulate No, no dirt. You would be really hard pressed to tell the difference between this and the stock as far as how its looks when applied, cut outs and what not. The paper texture I would say is the same and the clarity is amazing! I recommend this mod more than anything. The stock screen grain bothered me a lot.
+johnny ulate No, no dirt. You would be really hard pressed to tell the difference between this and the stock as far as how its looks when applied, cut outs and what not. The paper texture I would say is the same and the clarity is amazing! I recommend this mod more than anything. The stock screen grain bothered me a lot.
Hey man, the one with 25% antiglare from photodon, does it blur the image more than the Wacom stock one? I'm considering getting one, but I'm at europe so it's coming out at almost 100 bucks. I want to be sure it doesn't blur the image too much.
No nothing close to stock wacom. Wacom stock was atrocious and i cant believe they released it with that. It had like this weird sparkle effect. I did a comparison of all the photodon screen protectors let me see if i can find it. But I would go with the one I use in all my videos, it had the right texture to clarity ratio, meaning it didnt degrade the screen res barely at all but still felt better than the wacom one.
Just got the CC2 and happened to order that Photodon protector as well. Maybe I'll wait til warranty is up and try completely replacing the stock like you did. I expected some grain but not to this extent, and with the rainbowy effect too. Looks like the antiglare phone screen protectors from years ago. Plus I have to turn the display down to 1080p to draw smoothly in Photoshop on the i5. Kind of need to do it either way to use all my software that's not made for high PPI. So it's degraded the screen quality even worse as it's not the native resolution. Maybe swapping out that stock film will make 1080p look a little better.
+The CG Alchemist I believe it was the same as yours. MXH? I'll wait a while before I decide to use it or not, still getting used to using a screen tablet in general.
+kouotsu fair enough. that's understandable, it took me a few months to get the nerve to try it myself. Enjoy the cintiq is a great device. The pen is still one of a kind.
+The CG Alchemist I actually went ahead and put it on top of the stock film and it still improved the image quality a ton, pretty much got rid of the rainbowy effect!
I'm happy that you've gotten yourself a proper screen experience, that is great, however the terrible batterry life is still for ing me to wait for an update, maybe they will update the entire line with skylake processors so that they maintain high performance yet with lower noise an longer lasting batterry, anyhoot it's great to see that getting rid of this godawful screen protector is fairly easy, plus it's even an excersise so you keep your muscles in shape hahaha
haha yeah it gave me a workout! I love this device especially now. But I agree on the battery life. I really can't wait to see what the future brings for this line. hopefully smaller/lighter body while keeping the hot keys. Also better battery life for sure!!
+The CG Alchemist You're the bravest person I've ever seen lol. Hey do you know if the 13hd has this same protector and if this can be done on a 13hd as well? Thanks!!
First off, thank you! haha, yeah I was worried this could go really bad, but to be honest it was really quite painless, and im so so so glad I did it. The 13hd I have never owned so I cant say for certain, but since it such a similar model I have a feeling it does. I will put some pics up on my blog to help with this process and verifying if the screen has a protector. If you want to find out now. Look for a thin gap between the edge of the film and the screen edge, you can also see it around the camera hole. The gap will be shiny and show the glass underneath.
I took my stock screen protector off my cintiq comanion 1. I placed damp paper towels on the area for about 3 hours and took the edges off with my Kershaw Leek and it reduced the tack but it was still hard to remove. Anyway I got 3 different photodon screen protectos varying in percentage and put all of them on there. Sounds strange but it worked.
+princessprince onemorekiss wait you put all three on? i mean layered them? Just curious why and which ones? The one i chose is perfect. It had the same texture as the stock but with wayyyyyyy better clarity, i love it! Are you happy with your results?
Yeah. I got the 10%, 25% and 35% antiglare films on mine. Reason is that once I took off the stock screen coating, there was this odd glare on the screen... Like, really fine lines of light running horizontally and they were super annoying and stressed out my eyes. So all three of those screen protectors hid the lines while keeping clarity. Which screen protector did you get again?
+princessprince onemorekiss that sounds like a strange problem. were the lines uniform? could be the digitizer, but I imagine one screen protector would mask any of that. I got the MXH 25% anti glare. it's very clear with just enough anti glare and texture. I love it.
So, are you still using this photodon? Are you happy with it so far? I'm a bit scared to change mine, but all these rainbow stuffs on scratches bothers me. Thanks
@@TabletOsxBay hy. This photodon foil make the paper effect on drawing? Is similar with the drawing feeling when you draw? I have a surface pro and my screen is glossy and the pen is drawned on it. In the past i have the wacom cintiq 24hd and the drawing on it was amazing. On surface pro screen i can draw.
Hey I always go with photodon. They have great service. You can order a sample pack and it will come with a 5 dollar off coupon when you decide to order. I always go with the mxh it has low grain but is still matte and has a paper feel. The best middle ground.
So, out of the tablets out there, what do you personally prefer? I have the Cintiq 2, But I'm looking at the Surface Pro4... Also, the VIAO I heard is good too..
the viao is nice and very powerful. I didn't care much for the screen or form factor. I like the surface line because they straddle the line of laptop and tablet. Do your want something more portable that you can type on or something very powerful? what apps do you use?
+REP96st yeah I think you will be very happy with the surface pro 4. Same idea as the cintiq but way lighter and the kick stand is built in. The biggest compromise is the lack of hardware hot keys but you can find in screen applications like tablet pro that will help with the transition.
+The CG Alchemist yeah, I was thinking that.. Might have to bump off the Companion then... Thanks for the quick feedback! I'll be following from now on.
is that the new model? Does it already have one in place? is it grainy? I would contact photodon. They do custom cuts of any of their screen protectors and have many to choose from. I prefer the MXH or MXF, due to low visual grain bit still offering a paper texture and finger print/glare resistance.
The CG Alchemist The problem is I live in the UK. I've checked out Photodon and they do protectors, but I really need it before Christmas. Oh well I'll just have to pay to get express delivery here. Thanks for the reply! Subbed :)
Hi so I've had my wacom cintiq 13hd for a few months now and it's starting to get a few scratches... and I was wondering if it comes with a screen protector? It's kinda hard to tell if something is on it or not.. and I don't want to try to peel it of.. I'm scared that it's nothing there and instead of removing the protector I just break the screen..
+Midnight Shadow Ive heard that the 13hd doesnt or at least the first gen model, but I find this very hard to believe considering its essentially the same thing as the companion. You can tell if you look at the camera hole or around the edges of the screen. You will see the shiny screen under the protector. I believe I have a few examples on my blog at www.TheCGAlchemist.com Let me know please, I would like the info for future reference. Also what model do you have?
I have "one by wacom" tablet, can I use any screen protector? like a galaxy tablet screen protector, or it has to be from wacom. I have some scratches on my tablet :(
Yeah im pretty sure its gorilla glass 3 but Im not certain and even if it is, I wouldnt want it bare. There are many downsides to this, mostly being that it would collect tons of finger prints and offer not traction for the pen.
Are you asking about the clover version? Any version should work to install. You just need to right kext files. There should be a full tutorial on my blog.
TheCGAlchemist I believe it does. The screen protector for your cintiq was already on yours when you bought it correct? (Meaning the one you pulled off in the video)
Yep, i cant tell you if it had one, i try to tear off one corner, but dont blend even a little, just want it to know if i should get one to avoid scratch when the pencil get sharpend.
+jmsmoriarty I have pics on my blog to help tell. if you look at the edge ava around the camera there will be a noticeable gap from the glossy screen underneath and the matte screen protector. If you remove it I highly suggest replacing it with the one from the video. it feels the same but is infinitely more clear.
+jmsmoriarty I have a cintiq 13HD as well and after a year I got tired of all the scratches and rainbow lines. I have just replaced the screen with the one from this video and it works perfectly!
HI! so the cintiq 13 hd does come with a screen protector and that causes the rainbow lines, right? I want to remove it but I don't want to screw things up.
does the 25% screen glare option provide enough paper like grain? it seems very smooth. I use a huion tablet monitor that has this unusably smooth glass screen and a pen so i have the opposite of your problem.
Yes I’m pretty sure does I just spilled a little bit and looked at my screen but I’m using a companion hybrid and I’m shocked they been hiding this from usThat we will have to pay to get a screen replacement but really the other doing is replacing the screen protector wow I’m just lost for words
Well, I decided to call Wacom to see if I could answer my own question. First I spoke to sales - understandably, the poor guy had no idea what I was talking about. So, I talked to technical support. He didn't know either. So, I carefully explained it to him and, as expected, he went to ask his "supervisor". When he returned he said "removing the screen" would void the warranty. I didn't feel up to explaining to him (yet again) that I did not want to remove the screen itself - just the plastic on the screen.
haha! what a bunch of gimps. I think this fucking piece of cheap plastic is actually Wacoms way to make the "non glare" screen. Just put a bit of foil on there and we can call it non glare. They can make some really annoying choices at wacom I think. At least for the price they are selling their products.
unclesugar900 not sure about the 13hd but they seem to be very much the same. You can check by looking for a bit of separation around the edge and around the camera hole. You will see the glossy part.
+unclesugar900 well wacom guys deny it when I asked and even advised against installing any screen protectors, but you can see a thin grainy film over the actual glass when looking at the edge. Not sure if I should trust my eyes or them (-_-)
Haha, I was terrified too! But really its not bad, The adhesive is strong so just take your time, but it comes off clean so you dont have to worry about removing any residue, its way easier than I expected.
While the Cintiq Companion 2 is a WIndows 8.1 tablet computer, you can also use it as a standard Cintiq display tablet and plug it in to a MAC, PC or Laptop and use whatever software you have installed onto that instead.
im not sure but i think so. You can tell if you have a screen protector by looking at the edge of the screen or around the camera hole. there will be a tiny sliver of shiny glass around the edges.
I had no idea that my Cintiq Companion 2 had a screen protector on it.. there's tons of scratches from my pen, which I figured were on the actual screen, so I called Wacom and they said it would cost over $600 to replace the screen. I looked in the description of the device and there's no mention of it coming with a screen protector. Thanks for the video! You saved me tons of money haha
Hannah Kienzle awesome! seriously so glad to help especially when it comes to saving some money on an already expensive device.
Do you have specific link for the screen for the Wacom cintiq companion 2
@@TabletOsxBay hello, i know that this is an old video but i need help. I accidentally scratched my wacom screen, (very very tiny scratches) but i don't know if my wacom already has a screen protector. (because it's really hard to tell)
I mean, does a wacom tablet come with a screen protector already placed on it? Or i scratched my real screen?
@@TabletOsxBay i have a wacom companion 2, the same as yours
@@Acme_the_rubberhose_dog what product do you own? A good amount of them do have screen protectors, i think aside from the newest ones with etched glass which i havent seen. Also if the etched glass looks anything like their old screen protectors I would send that shit back from day one. I like having the option to take it off and replace it with a clearer option. To tell if yours has a screen protector look at the edges of the screen, if there is a sliver of shiny screen at the very edge chances are it has a screen protector, also you can usually use your finger nail to feel for an edge to the screen protector. Again tell me what device it is and I will try to help you find out. Also if you fuck yours up its not my fault. :D
Hi, I wanted to say thanks for this video. My Cintiq Companion Hybrid was awful. Seriously, it looked incredibly blurred in the middle of the screen at the point that when I really needed to see something sharp, I used another part of the screen.
I followed this procedure and it was perfect.
1) Taking out the old screen protector was much easier than what I expected. I removed the corners with my fingernails, didn't need to use any tool. Then I just took my time to remove it completely.
2) Putting the new screen it was the most difficult part, but if you follow this video it is very easy and 0 bubbles will remain.
The result is incredible. Seriously. I feel like I was blind.
THANKS!
Haha well it sounds like you are putting your device to good use. Glad it helped!
For those who are wondering, YES, the Cintiq 13HD does have a screen protector.
what about the Cintiq 16 non pro?
This was a really helpful video! Finally got the courage to replace the stock protector on my Companion 2 too and I'm really glad i did.
This was probably the best and easiest tutorial I've ever been able to follow on the internet, props to you man.
Wisdom Tooth thanks a lot! means a lot! glad it was helpful.
I did this to my 13hd last year. He isn't' lying, it is shocking how much better the colors and screen look without it on there.
Wait so the 13 hd does comes with a small layer of film as well? Because everywhere i have been looking says it has no protection. i compared it to my friends cintiq hybrid and it felt and looked the same but i wasn't sure...
It sure does.
does it make the screen brighter? i hate that my cintiq 13hd is slightly dimmer than my laptop and other screens.
Yeah, your screen will be a bit brighter. The biggest thing is the clarity, it is night day.
do you know if the new cintiq 16's allso have that kind of removable layer on them or not?... i just got a scratch and wacom support said they wouldn't RMA it :/. Really awesome Vid btw really understandable and clear :)
Hey thanks! sorry to hear about your device, im not certain because I havent worked on any of this for a while but I have heard it has "etched glass" which afaik means the texture is literally etched into the glass, they probably did this with newer models because they were sick of me helping people fix theirs and making it look better, haha. All joking aside I will look into it for you, but you can try to check for yourself by looking at the edge of the screen to see if there is a little shiny lip, or around the camera hole if there is one. You should then be able to pick at it with your finger nail. I will see if i can find a better more definitive answer, please let me know if you do the same!
same question, let us know if you know if also have that kind of removable layer on them or not?
Thanks a lot, great video,
@@TabletOsxBay Same here, please let us know. Ordering a Cintiq 16 soon
@@zuzem1 They do. I just scratched my new 16 inch (not the "pro" version. The 800$ one) and have to remove the factory layer just like my old 13in hybrid. I used a thin exacto knife to peel up the corners, and just like this video it should remove the same. Seems like wacom cheaped out on the nibs/screens, because I didn't have to do this with my old 13in hybrid till after 3 years. It's only been 2 months with my 16 inch, and already have to replaced the nibs and screen. Oh well.
Thank man, the instructions I got from the screen protector were stupidly confusing!
I still got some little bubbles, but at least I didn't throw 16 bucks into the bin
Hi Again.. Ok.. You are so right... I have been using the Companion 2 to make Virtual Reality games but when I was watching the premiere of Big Brother UK, it looked ... Really grainy.. Now I can't stop seeing it! I'm just going to go ahead and order the one you got. 'clearly' you would have picked an appropriate replacement. Glad I found this again. I don't think you need to heat it,.. I just tried the corner of mine and it comes right up... I plan to use lateral force only, and as you found, work out to in, in waves,..
the Screen protector is on every Wacom ? i use a cintiq 16, and i dont know if i can change my screen like u, the SAV say : u need to pay 300€ for change ur screen ... T_T
need u pls !
and really thanks for this great tuto !!!!!
Thanks for this helpful video! I have the Cintiq 16 (non pro) and I’ve only been using it for a couple months, but it seems my pen nib has already scratched it. Am I able to put a photodon screen protector over the existing one? I’m worried about voiding the warranty of the tablet.
My Wacom Cintiq 16 come with stains on the factory screen protection. And i don't know if I can remove it ? The protection is very very strong glued. Is this the same problem as your?
Can you give me the model number? Or send pics? What kind of staining? If it's a newer model i think they have etched glass which is non removable. But if it's a stain you should be able to clean it with a solvent.
@@TabletOsxBay Thank you, this is a link to some photos of the stains : drive.google.com/open?id=1RlH_96O4KxyC_DG0vU0EZpuIUaE4snRn
Model Wacom Cintiq 16 : www.amazon.fr/Wacom-Cintiq-interactif-professionnel-R%C3%A9solution/dp/B07LBGH67J
I've got the MXH 25 for my faithful 12WX, but I haven't worked up the courage to go through with it.
The stock is pretty scratched up after 7 years of use but I can't help but think it's a minor nuisance compared to a potential mishap during the swap.
I'm going to wait.
You're one heck of a brave man!
I've been looking for over a year for some info about this. I have the companion and since the first day I wondered what would I do the day the screen got scratches and stuff on it. Today is the day! I'm taking that stock protector off!
How has the new screen been working for you?
I'm very curious about the whole "color improvement" you mention. Is it really that noticable??
+NaonBlake Sorry I was away a bit. Yes it makes a world of difference! I love the new screen protector and it fits like the stock one. The difference mainly is clarity. No more ugly rainbow grain. Did you do it? You will be glad you did.
+The CG Alchemist I did it, but I didn't have the right screen protector to replace it, so now I can see the streaks of light on the screen (in a white backgrounds, mostly, but still) 'cuz my new screen protector is a clar one, very thin and with no antiglare. It's a bit annoying, tho the colors are brighter and look a lot better. The stock film was.. pretty bad, to say the least.
I ordered the same screen protector from photodon you did, and now I'm still waiting (I live in Chile lol), but I have high hopes. I hadn't realized how much I hated the rainbow grain thing until it was gone, so now I mostly need patience lol
Thank you for your answer!
Awesome! congrats on the change! Yeah my OCD made me hate the original screen protector. The one from photodon is great because its a lot like the original in anti glare and paper feel without the grain!
Yeah, right now it's like drawng on glass!
When I ordered the wrong screen protector it was around the time the companion came out and no one really sold screen films specifically for it. I didn't know better lol
So I hope the photodon one will be great. Right now the screen looks almost like a mirror when it's off lol
I'm crossing my fingers that the streaks of light will vanish with the new film. Comparing the stock film with the one I have right now, it was 10 times ticker, so that's probably why I see them now, but still. I'm a paranoid c:
Thanks for your reply!
Annnnnd the new film just arrived! xD
Thought I'd share lol
I hope it fits great :)
The other day I let my mother draw on the Companion and I didn't notice that she was wearing watch... yes, the screen got scratched. Quite noticeably.
She didn't do anything she wouldn't do with her iPad, but of course... it's not an iPad, though it's much more expensive.
It's frustrating 'cause I'm always so careful using and handling this device, and in 5 minutes it can get ruined...
I'm relieved to see this video. I've ordered the same MXH protector from Photodon and will receive it in 2-3 weeks.
I should have done this the first instant I ordered the Cintiq, but I didn't imagine the screen was so damn sensitive.
Now I'm debating if I should remove the original protector or just stick the new one on top.
I've heard that the warranty doesn't cover this kind of damage, that they charge 200 or 600 bucks to replace the whole screen. I have to call Wacom about this yet.
It's shameful that they talk about "protecting your investment" during 4 years with a CarePack, but don't actually do a thing or take responsibility for their easily damageable screens.
If the sample looks fine over the scratches, I'll stick it on top, or even, I'll pay the repair, and immediately cover it when it comes back.
Or even, what the hell, I'll just remove the original protector and screw Wacom and their CarePack -and possibly myself.
In the video the new protector looks better than the original, so I hope to end up with an even better Cintiq..!!
I'm crossing fingers.
Anyway, it's sh*itty from Wacom's part, for 2 grand one expects the screen (which is all it's worth) to be more durable than this.
I fully agree. I love my cintiq but it has some major short comings. The terrible stock screen protector, the performance and the battery life. If I were you I would swap out the stock protector all together. You would be really impressed by how nice the screen actually is without all the grain. Glad the video helped give you hope if nothing else. let me know what you decide to do and how it turns out.
Hey thanks for the advice! The video did help a lot, I just wish it wouldn't void the warranty removing the original protector. I don't know for sure, but I guess it will.
I'll let you know
Hey, I changed the protector today.
Finally I got rid of the scratches.
Also the image is more crisp now, compared to the "grainy" stock protector.
I got a bit of lint here and there, but overall it went fine. I can always change it again.
Thanks for the video, it was very helpful!
Hey thanks for the thanks! means a lot. It really makes a world of difference huh!? I love the screen after.
does xp -pen artist 22e have a screen like this.
yes
Hi I have a cintiq 16 ( not the pro version) and I utterly dislike the sound it makes ..it's like a using a dry felt tip or a dry marker on a paper ,although the pen itself is smooth but I hate the sound it makes ..is it possibly due to the stock screen protector? .I tried to feel it on the edges but isn't sure is there is screen protector. I tried removing or feeling using my finger nail but it isn't coming off ,thus making me unsure if there is a screen protector. I think it s not etched glass which I think Wacom given in pro models .. please suggest.
for some reason I feel like most of the new products have etched glass which would be a shame. Can you link me to the specific model? If there is a screen protector there will be a slight gap around the edge where you can see the shinny glass beneath, id say a fraction of a mm. Is the clarity of the screen grainy?
@@TabletOsxBay thanks I found that there was indeed a film there .which I removed and it's shiny glass now ..I will put a better screen protector now.
@@vikasupadhyay1398 awesome! congrats, wacom screen protectors have been shit in general. I wouldnt use it until you get a screen protector however, in fear of scratching it. But thats up to you.
@@TabletOsxBay yeah you are right !
@@vikasupadhyay1398 can you please tell how you removed? It's making sound like I'm breaking
il faut pulvériser un peu d'eau savonneuse comme pour les stickers et essuyer l'eau coule en dehors vous aurez moins de bulles et moins de poussières qui viendront avec l'eau
Thanks so much for the video, got more confident about replacing mine!
hey, great vid thanks. Considering doing this for my Cintiq 13HD (somehow got scratched in my bag, gutted), its got some serrated marks and one gouge maybe 1/4 of a millimetre in depth. Should I try putting a protector on top and see if it seals it? just so annoying running the pen over it, but dont want to replace if Im likely to get air bubbles anyway. very on the fence about it, any advice? Thanks man!
Xavier Ward don't know if I ever got back to you. how did it turn out?
Hi, how are you rinning the OSX on your tablet? Could you provide more details on the dongle, Thank you!
Thanks for your video, I couldn’t find any protection screen for my tablet!
I just have a question, the touch texture is the same or is it smooth?
Sorry for my english i'm french :S
Hey dude I've got a question. Do you think its worth it to get the Cintiq Companion 2 & run it as a hackintosh? I'm still having doubts if I should.
+Zak Ross Hey sorry i didnt see your comment until just now. What are your doubts? What do you normally use? Whats your profession? I guess the choice really depends on a lot of things. I think a surface would suffice for many and the portability is great, however you cant hackintosh it and have it as compatible (pen/touch etc.). Also the cintiq pen experience is hands down the best. So id say if youre a hobbyist maybe not necessary but if you do this for a living id say go for it. Especially now that the screen looks so great! :D
+The CG Alchemist I'm a motion designer actually. I typically use a wacom intuous pro at home & in the office. I figured having this would help during my 1hour long train ride to work everyday. At least I could get some stuff done. But when I heard about the fan noise issue I was abit dissapointed. Do you have any problems so far now that you hacked it to run a mac? I'm actually ok with either windows or mac.
+Zak Ross well if you're used to wacom pro level stuff you would feel right at home with this. But portability wise you might want to see what the next surface has to offer. as for running osx, it doesn't make much difference performance wise. fan noise is really only a problem in very quiet environments. I couldn't even hear it when I was in a coffee shop.
Thanks kindly for this video! Do you have any idea if the 13HD has the plastic film just like the Companion 2, or is it etched glass?
Hi... great video. Have any idea if this same technique would work on an older Cintiq 21UX? My screen is pretty scratched up, especially in the center where I work the most... it is to the point where I can feel it on the pen nib. I see a lot of other commenters have mentioned other devices. I'm guessing my 21UX is removable too. Any thoughts would help. Thanks in advance.
I've not really had any issue with the stock screen but sadly it has gotten to the point that there's a large splotch around the middle where I've scribbled at the most, and then the area around it is also showing a faint wear
Sameeee wondering if when I buy a screen protector from photodon if this wear will show underneat, or will I have to remove the stock as well
OMG watching this gives me the heeeeebie-jeeeebuies lol. i was totally cringing at 1:32 lol the razor blade initial separation of the protector..... hahahaha
Hahaha yeah I was pretty terrified myself. was a shot in the dark but worked out great!!!
+The CG Alchemist i just removed mine!! holy shit man it looks so much better. that stock screen protector was crap. i bought a panzer glass for mine.i will let you know if its cool. i like the color vibrancy as well.
so back to the ram upgrade the CPU look like it can support a 1666 MHZ why did you stick with the 1333.
+CTS I don't remember exactly. Maybe I was trying to match the stock. or I was just really excited and didn't check. Haha. But yeah the screen looks so much better right?! It's actually really beautiful.
it is amazing!!!! i was drawing all night and seeing all those colors it was like i had a new tablet lol
+CTS I know, it really bothers me that wacom uses such shit screen protectors when there are way way better ones by photodon. Did you put a new one on? the one I used had the same texture of the stock so it felt like paper to draw on but was clear in comparison.
Does the Wacom Cintiq 16 (Not PRO) come with a factory installed screen protector as well?
Thanks!
Does the new Cintiq Pro have it too or it's just something about Companion line?
I know this is super late but im pretty sure the new line has etched glass which, as far as i know, means the glass itself has a texture and no screen protector but im not 100 percent certain. Did you ever find out?
Here the link to the Wacom Cintiq Companion 2 screen
www.photodon.com/p/3153-01.html
Interesting video...Did you had any inconvenience with the touch functions? I heard that putting a protective film on the screen could make the 'touch' unusable(I don't know if there are better brands or not).
no touch was fine, felt the same as stock. The screen protector I chose offers the clearest image while still feeling like paper.
Great, thanks for your reply!
So I just bought the wacom cintiq 22hd and was looking at getting a screen protecter for it. Do they all come with one installed? if so I will hold of on getting a screen protector.
CyberFoxGaming fairly certain they do but you would have to check the edges. I had the 24hd and I'm pretty sure it did as well.
For the stock protector, was there some kind of adhesive or was it just a standard screen protector that is applied with a film of water?
Steven Kennett there was an apparent adhesive but it didn't leave any residue
I have a colored scratch on my Cintiq 13 HD. I cant feel it to the touch, the nub of my pen goes over it smoothly, it doesn't appear to be growing, or doing anything untoward, but in the scratch pink and green light kind of flickers depending on the angle. I'd be curious to know how anybody would tackle this problem? The tablet had a long life before it found its way into my hands, bought it used, and id like to know what this colored scratch is and what if anything I can do about it. My first and best bet is to throw a screen protector on top of it and hope that levels out the visual imperfection and reinforces anything that might be weakening, but I'd appreciate any advice anyone might have.
ONLY CREDIT CARD, NO AMERICAN EXPRESS?
Hello friend! Greetings from Ecuador. I'm planning to buy a wacom cintiq 16 in USA, and all related stuff to use it, including a screen protector. Do you know if Wacom Cintiq comes with a screen protector in it? I have read in many forums that scratches appear in screen, even with few use, so I want to protect it as much as I can. Thanks in advance
the hole part arround the camera has gotten any dirt around the edges, or between the border of the protector and the inner frame of the tablet? any difference on the paper feel
+johnny ulate No, no dirt. You would be really hard pressed to tell the difference between this and the stock as far as how its looks when applied, cut outs and what not. The paper texture I would say is the same and the clarity is amazing! I recommend this mod more than anything. The stock screen grain bothered me a lot.
+johnny ulate No, no dirt. You would be really hard pressed to tell the difference between this and the stock as far as how its looks when applied, cut outs and what not. The paper texture I would say is the same and the clarity is amazing! I recommend this mod more than anything. The stock screen grain bothered me a lot.
1:45 you scratched it a little bit with that?
Hey man, the one with 25% antiglare from photodon, does it blur the image more than the Wacom stock one? I'm considering getting one, but I'm at europe so it's coming out at almost 100 bucks. I want to be sure it doesn't blur the image too much.
No nothing close to stock wacom. Wacom stock was atrocious and i cant believe they released it with that. It had like this weird sparkle effect. I did a comparison of all the photodon screen protectors let me see if i can find it. But I would go with the one I use in all my videos, it had the right texture to clarity ratio, meaning it didnt degrade the screen res barely at all but still felt better than the wacom one.
hopefully this helps. photos.app.goo.gl/TJfrKHzKH8sJJQFu7
@@TabletOsxBay thanks!
Just got the CC2 and happened to order that Photodon protector as well. Maybe I'll wait til warranty is up and try completely replacing the stock like you did. I expected some grain but not to this extent, and with the rainbowy effect too. Looks like the antiglare phone screen protectors from years ago. Plus I have to turn the display down to 1080p to draw smoothly in Photoshop on the i5. Kind of need to do it either way to use all my software that's not made for high PPI. So it's degraded the screen quality even worse as it's not the native resolution. Maybe swapping out that stock film will make 1080p look a little better.
yeah the stock screen protector is surprisingly bad huh. doing the mod makes a world of difference. what screen protector did you get?
+The CG Alchemist I believe it was the same as yours. MXH? I'll wait a while before I decide to use it or not, still getting used to using a screen tablet in general.
+kouotsu fair enough. that's understandable, it took me a few months to get the nerve to try it myself. Enjoy the cintiq is a great device. The pen is still one of a kind.
+The CG Alchemist I actually went ahead and put it on top of the stock film and it still improved the image quality a ton, pretty much got rid of the rainbowy effect!
+kouotsu awesome! yeah I've heard a few other people say after market screen protectors improve the image some when applied on top! congrats! :)
I'm happy that you've gotten yourself a proper screen experience, that is great, however the terrible batterry life is still for ing me to wait for an update, maybe they will update the entire line with skylake processors so that they maintain high performance yet with lower noise an longer lasting batterry, anyhoot it's great to see that getting rid of this godawful screen protector is fairly easy, plus it's even an excersise so you keep your muscles in shape hahaha
haha yeah it gave me a workout! I love this device especially now. But I agree on the battery life. I really can't wait to see what the future brings for this line. hopefully smaller/lighter body while keeping the hot keys. Also better battery life for sure!!
+The CG Alchemist You're the bravest person I've ever seen lol. Hey do you know if the 13hd has this same protector and if this can be done on a 13hd as well? Thanks!!
First off, thank you! haha, yeah I was worried this could go really bad, but to be honest it was really quite painless, and im so so so glad I did it. The 13hd I have never owned so I cant say for certain, but since it such a similar model I have a feeling it does. I will put some pics up on my blog to help with this process and verifying if the screen has a protector. If you want to find out now. Look for a thin gap between the edge of the film and the screen edge, you can also see it around the camera hole. The gap will be shiny and show the glass underneath.
+tinktwiceman I did this to my 13hd. Older models supposedly had etched glass.
Thank u so much for this
Youre very welcome! :D
Is it okay to install a film before alcohol evaporated?
Hey dude what product you use to clean the display? thx!
I took my stock screen protector off my cintiq comanion 1. I placed damp paper towels on the area for about 3 hours and took the edges off with my Kershaw Leek and it reduced the tack but it was still hard to remove. Anyway I got 3 different photodon screen protectos varying in percentage and put all of them on there. Sounds strange but it worked.
+princessprince onemorekiss wait you put all three on? i mean layered them? Just curious why and which ones? The one i chose is perfect. It had the same texture as the stock but with wayyyyyyy better clarity, i love it! Are you happy with your results?
Yeah. I got the 10%, 25% and 35% antiglare films on mine. Reason is that once I took off the stock screen coating, there was this odd glare on the screen... Like, really fine lines of light running horizontally and they were super annoying and stressed out my eyes. So all three of those screen protectors hid the lines while keeping clarity. Which screen protector did you get again?
+princessprince onemorekiss that sounds like a strange problem. were the lines uniform? could be the digitizer, but I imagine one screen protector would mask any of that. I got the MXH 25% anti glare. it's very clear with just enough anti glare and texture. I love it.
does it make the screen brighter? i hate that my cintiq 13hd is slightly dimmer than my laptop and other screens.
It's very answered my question,
Thanks a lot.
but one of my questions.
whether screen protector from photodon will last a long time?
R. AGOES SEPTIANA WIDJAYA it should. I mean as long as the stock one at the very least.
So, are you still using this photodon? Are you happy with it so far?
I'm a bit scared to change mine,
but all these rainbow stuffs on scratches bothers me.
Thanks
R. AGOES SEPTIANA WIDJAYA I'm actually not using the cintiq any more but still use photodon protectors. they hold up very well.
@@TabletOsxBay hy. This photodon foil make the paper effect on drawing? Is similar with the drawing feeling when you draw? I have a surface pro and my screen is glossy and the pen is drawned on it. In the past i have the wacom cintiq 24hd and the drawing on it was amazing. On surface pro screen i can draw.
@@BoghiuTeodor yes the screen protector feels a lot better then stock. Much like paper.
Where do you get new screen protectors?
Hey I always go with photodon. They have great service. You can order a sample pack and it will come with a 5 dollar off coupon when you decide to order. I always go with the mxh it has low grain but is still matte and has a paper feel. The best middle ground.
Anyone know if the Huion GT-191 v2 screen cover can be removed like this?
So, out of the tablets out there, what do you personally prefer? I have the Cintiq 2, But I'm looking at the Surface Pro4... Also, the VIAO I heard is good too..
the viao is nice and very powerful. I didn't care much for the screen or form factor. I like the surface line because they straddle the line of laptop and tablet. Do your want something more portable that you can type on or something very powerful? what apps do you use?
+The CG Alchemist I use sketchbook pro and Manga Studio. I like the companion 2, I like the size of the SP4 though.
+REP96st yeah I think you will be very happy with the surface pro 4. Same idea as the cintiq but way lighter and the kick stand is built in. The biggest compromise is the lack of hardware hot keys but you can find in screen applications like tablet pro that will help with the transition.
+The CG Alchemist yeah, I was thinking that.. Might have to bump off the Companion then... Thanks for the quick feedback! I'll be following from now on.
+REP96st absolutely! Good luck! I'm sure you won't regret it.
And what measure to create the film ? inch or mm? thx again
Trying to get a screen protector for my Wacom Cintiq 27QHD. Any suggestions?
is that the new model? Does it already have one in place? is it grainy? I would contact photodon. They do custom cuts of any of their screen protectors and have many to choose from. I prefer the MXH or MXF, due to low visual grain bit still offering a paper texture and finger print/glare resistance.
The CG Alchemist The problem is I live in the UK. I've checked out Photodon and they do protectors, but I really need it before Christmas. Oh well I'll just have to pay to get express delivery here. Thanks for the reply! Subbed :)
Pix Pix Okay, thanks for the advice.
Hi so I've had my wacom cintiq 13hd for a few months now and it's starting to get a few scratches... and I was wondering if it comes with a screen protector? It's kinda hard to tell if something is on it or not.. and I don't want to try to peel it of.. I'm scared that it's nothing there and instead of removing the protector I just break the screen..
+Midnight Shadow Ive heard that the 13hd doesnt or at least the first gen model, but I find this very hard to believe considering its essentially the same thing as the companion. You can tell if you look at the camera hole or around the edges of the screen. You will see the shiny screen under the protector. I believe I have a few examples on my blog at www.TheCGAlchemist.com Let me know please, I would like the info for future reference. Also what model do you have?
I have "one by wacom" tablet, can I use any screen protector? like a galaxy tablet screen protector, or it has to be from wacom. I have some scratches on my tablet :(
wait is that the brand new one?
does it make the screen brighter? i hate that my cintiq 13hd is slightly dimmer than my laptop and other screens.
Mindful Living yes I would say it does but only slightly.
Wacom screen protector has grain and feels like a paper how about you screen protector from photodon? Is it comfortable to draw on it too?
yes it's amazing! the clarity is night and day, and the texture/anti glare are about the same. Are you considering swapping?
How about The nano liquid protection? Can it work?
Does anyone know if the mobilestudio pro 13 has a screen potector?
Now that you have mac's os running has the battery life changed ?
no I would say it seems to be the exact same. :\
Hello Is the screen glass or plastic?? Thanks for doing this, I was wondering.
+REAYTH im almost positive the screen is glass.
thanks should be scratch proof then
Yeah im pretty sure its gorilla glass 3 but Im not certain and even if it is, I wouldnt want it bare. There are many downsides to this, mostly being that it would collect tons of finger prints and offer not traction for the pen.
thank you
Wow, how did you get The w1310 drive clover? Can you send me a copy? Thank you very much!
Are you asking about the clover version? Any version should work to install. You just need to right kext files. There should be a full tutorial on my blog.
Hi! Does this process also work with the Cintiq 13HD? I've heard it does but I wanted to see if you knew for sure. Thank you!
LittleSeto sorry I'm not sure. never owned one. you can tell by looking at the edge of the screen.
TheCGAlchemist I believe it does. The screen protector for your cintiq was already on yours when you bought it correct? (Meaning the one you pulled off in the video)
TheCGAlchemist Also would there be anyway I could send you a picture of the cintiq screen to make sure?
LittleSeto yeah. send pics of the edge and camera hole on the front if it has one. to thecgalchemist@gmail.com
TheCGAlchemist oh sorry I didn't get this message till now. I'll send it over thanks a bunch!
Hi, nice tutorial !
Have any idea if the CIntiq 13HD comes with a stock protector ?
Thanks, have a nice day.
I've heard conflicting things. to me it would make sense if it were the same as the companion but others have said it does not. Do you own one?
Yep, i cant tell you if it had one, i try to tear off one corner, but dont blend even a little, just want it to know if i should get one to avoid scratch when the pencil get sharpend.
+jmsmoriarty I have pics on my blog to help tell. if you look at the edge ava around the camera there will be a noticeable gap from the glossy screen underneath and the matte screen protector. If you remove it I highly suggest replacing it with the one from the video. it feels the same but is infinitely more clear.
+jmsmoriarty I have a cintiq 13HD as well and after a year I got tired of all the scratches and rainbow lines. I have just replaced the screen with the one from this video and it works perfectly!
HI! so the cintiq 13 hd does come with a screen protector and that causes the rainbow lines, right? I want to remove it but I don't want to screw things up.
Hey guys, what's about cintiq 13 HD? Does it come with a screen protector?
Ion Solonari you can check b looking at the edge and camera hole.
Anyone knows if the MSP 16 has a protector aswell?
wacom NEEDS to release a gorilla glass version.....come on give us glossy options
Yeah I agree, for as much as the devices cost they should have screen options.
does the 25% screen glare option provide enough paper like grain? it seems very smooth.
I use a huion tablet monitor that has this unusably smooth glass screen and a pen so i have the opposite of your problem.
Is there a way to replace the screen itself?
Does anyone know if the Cintiq 13 touch has a screen protector on it as well?
Yes I’m pretty sure does I just spilled a little bit and looked at my screen but I’m using a companion hybrid and I’m shocked they been hiding this from usThat we will have to pay to get a screen replacement but really the other doing is replacing the screen protector wow I’m just lost for words
Does this procedure void the manf warranty?
Well, I decided to call Wacom to see if I could answer my own question. First I spoke to sales - understandably, the poor guy had no idea what I was talking about.
So, I talked to technical support. He didn't know either. So, I carefully explained it to him and, as expected, he went to ask his "supervisor".
When he returned he said "removing the screen" would void the warranty.
I didn't feel up to explaining to him (yet again) that I did not want to remove the screen itself - just the plastic on the screen.
haha! what a bunch of gimps.
I think this fucking piece of cheap plastic is actually Wacoms way to make the "non glare" screen. Just put a bit of foil on there and we can call it non glare. They can make some really annoying choices at wacom I think. At least for the price they are selling their products.
does anyone know if the new Wacom Cintiq 22 comes with a screen protector? I cant find one for it anywhere T-T
All models except Cintiq Pro have it. Those ones use etched glass.
so the 13hd cintiq i own has a screen protector this whole time?
unclesugar900 not sure about the 13hd but they seem to be very much the same. You can check by looking for a bit of separation around the edge and around the camera hole. You will see the glossy part.
+unclesugar900 well wacom guys deny it when I asked and even advised against installing any screen protectors, but you can see a thin grainy film over the actual glass when looking at the edge. Not sure if I should trust my eyes or them (-_-)
i want to buy screen protector for CTL671 any body help me?
Can I install Mac os on my wacon. If possible how. Thanks
hey I have a few videos on here that should help. Or check out my blog thecgalchemist.blogspot.com
Cintiq 13 hd has the protector too ?
ᅚ I haven't owned it so I can't say for sure. but I would think it would be the same. I've heard conflicting things. the are ways to check tho.
Спасибо!
пожалуйста
I HATE the matte screen protector it comes with. 2560X1440 QHD looks more like 720P. My eyes just got so use to Retina displays.
+drastic209562 I know! It bothered me soooo much I had to do this mod. Have you done it? The screen is actually pretty god damn beautiful afterwards.
The CG Alchemist Not yet. Kinda scared to mess it up. lol
Haha, I was terrified too! But really its not bad, The adhesive is strong so just take your time, but it comes off clean so you dont have to worry about removing any residue, its way easier than I expected.
+The CG Alchemist Aye but was the hairdryer necessary? I'm afraid to ruin the inside
no no. I just had that as a precaution. I thought it might be needed to soften the adhesive, once I started pulling it back tho, i realized it wasnt.
how do you install mac on it ?
Nguyen Anh Tuan check my blog or the other videos
How come you have Mac OS on a cintiq?
+CaptainKleptan Because I prefer it over windows.
While the Cintiq Companion 2 is a WIndows 8.1 tablet computer, you can also use it as a standard Cintiq display tablet and plug it in to a MAC, PC or Laptop and use whatever software you have installed onto that instead.
Vince Steele thank you for your concise answer!
CaptainKleptan lol. Only took 4 years for you to get one out of me.
Would anyone know if the same process will work with a Cintiq 13 HD?
im not sure but i think so. You can tell if you have a screen protector by looking at the edge of the screen or around the camera hole. there will be a tiny sliver of shiny glass around the edges.