Volvo door check/stop is bad and makes clunking noise. P3 Chassis.
Вставка
- Опубліковано 29 сер 2024
- 2009 Volvo XC70 T6 120,000km. Driver door stop has gone bad and makes horrible noise when using the door. The solution is to replace the part or buy an aftermarket repair kit.
Original Volvo part fits both Left/Right front doors: 31298466 and Both Left/Rear doors 31298467.
The door on my Volvo C30 does the exact same clunking noise, thank you for this tutorial how to replace it. It must be the same procedure for C30 I think. :)
Wow, my doors that have been used for ~365000km doesn't sound as bad. But now I'm tempted to have them changed anyway, thankfully they're a bit cheaper on this side of the pond apparently.
But as usual, good and educational video 🙂
Yesterday I repaired it thanks to you ;) V70 2009 2.4D 333000km. It was really bad, the same noise
Same problem on my 2008 S80 D5, although mine has 316k km. Your channel is a goldmine for us P3 owners.
So now on my list is trunk VOLVO badge wide letters retrofit, rear taillight facelift retrofit, TFT display retrofit along with flashing language to english, door hinges and stoppers, waterfall console retrofit (just like the one you did), R-Design steering wheel, rear view camera retrofit that makes RTM pop out when in reverse (already have CFE module that can program RTM to do that, just wiring needed at this point), R-Design pedals and change gear knob into one that's in better shape. Lots of work await, and my wallet is getting anxious :)
Please, what did you mean about "waterfall console retrofit"?
@@janskrabal6843 He did a retrofit of mid-cycle facelift waterfall, the plastic part that have the chrome bits on the sides. I mean the console in the middle that goes from under the A/C wents until the cupholders. There should be a video somewhere on his channel of how it looks.
@FullTimeGamerR ua-cam.com/video/p2Y7JbShlTw/v-deo.htmlsi=E3TlpCDgZySHURfR
As always, good job!
This kind of videos makes me want to buy XC70... Great video!
your videos are among the very best. I look forward to see it every time
I always enjoy your videos., keep up the good work. I also hope you are keeping safe with the severe weather over there. Take care.
The fact that you do these re and re items makes for valuable viewing...I do believe the quality of all parts has degraded over the years, so, not surprised to see the in service time of parts reduced...Sadly, the price of the car does not reflect the lesser parts quality installed....
I feel like it’s a design flaw. My 35 year old Volvo 240 has no issues with door stuff.
Another great video with all one wants to tackle the job. Thank you Sir.
You are so inspiring. My Volvo man.
I have 194... end sound about left side is the same but right is good.Thanks for films.
Купил новые втулки в которые упираются пружинки за "три копейки" на авито и заменил. Всё прекрасно работает.
Did you replace the door couple years ago? Thank you for your videos. Always learn Something new.
That looks like plain old white lithium grease for the door. As far as life time ? I am sure Volvo would say you have already got a lifetime use on this car. Fourteen years old now. I agree with you that part should last longer but you do live in a very cold climate so that might affect all these plastic parts. Thanks for your videos.
Interesting. Thank you for sharing.
Cool FCP has all of them and also the grease
Awesome job!
One video I'd love to see is fixing the window (auto) up feature. I have a 2010 s80 v8 and my window will only go up halfway, and then drops back down. I've had it apart 3 times and was never able to find anything obstructing the window channel that would signal the safety feature to drop. It's the most annoying feature of a rather amazing car.
Lower the window all the way, then raise it all the way, then hold the switch in the "up" position for 10 seconds. That should reset it.
@@kapucinski Yea, tried that a thousand times over the last 3 yrs to no avail
@@Pedal2Metal_on_UA-cam oh, I am sorry. That is very annoying.
@kapucinski Thank you though. It's apparently an "obstruction" somewhere.. odd thing is, when the window is wet or fogged up even slightly, it works fine
@@Pedal2Metal_on_UA-cam that suggests friction in the window seals/runners. Have you tried some silicon lube?
Hi Yuri, the door ligth which is shown on 3:00, on my s80 its not working anymore on driver side, what type of bulb installed there do you know?
Thanks a lot, good job again.
Ok I’ve found your retrofit led installation on door handles. So in the green bulb holder there is basically 2 cent led bulb :) I need to find one and solder. Thanks again.
The other thing that shouldn't happen is that inner lock handle mechanism. I thought they would have at least improved the design, but, seeing your video, it's exactly like my P2. The plastic shit they use never last!!! BAD design no doubt.....door handles, door stops etc !!!!!
My XC70 is a 2012 model with 140k miles and they work fine. I think it’s because I’m old school and lubricate all locks and door straps every 3 months.
Off the topic-have you not thought about changing mirrors for 2013+ V70 mirrors. That’s what I’m doing on mine. It’s just my opinion but I think they look better with that type of indicator.
Maybe not enough lube. That will be an expensive retrofit.
You might have been able to get access by removing the speaker to get to the door stop linkage?
Had this in my s60 also. Was wondering what caused it. Got a c40 before fixing it tho. The noise was really annoying.
Do you know where can i get volvo softwares to have what you have on your screen of you pc ?
Thank you
I have a volvo Xc60 2013 d4 163hp
have a problem with the car the error code p00bd Do you know what could be wrong then?
Google will help you. Just check in google. Air mass incorrect.
@@karolzabielski i have do that say air mass not that.. is my problem.. on my car
Are the hinges replaceable? On my S80 II driver's door hinges are bad..
Can you recommend forum for Volvo XC60 please?
Would it be advisable to keep this part topped up with new grease/lubricant to prevent it going bad?
I will keep it more lubed in hope to prolong its life. Not sure how beneficial it is.
I greased these (very) well 4 years ago as my passenger side front door was squeaky. Never had any problem since ! Those parts fail without grease, can’t understand why there was none to begin with !
Silicone spray or WD40 will both do the job as well if repeated say 3-4 times a year.
i change this on 2019 V90, i was really fiddly
Think I would have went with the Chinese part Obviously, the Volvo part didn’t do very well.
The vehicle has only 113,000 km and a part made in Germany failed .
100% I noticed too late.
If i hear Ali Express.. i allready start to gruwel... If i need Ali Express to maintain my car i sell it the next day. Than i am driving above my budget.
That does seem to be a dumb design
you dont have idea what you talking to
OMG, why!!? It's only 119 kkm mileage... 🤔
I have 170 kkm im my S80 and it works good all the time.
Good job anyway!