If you would like to know tightening torques: M6 - 10 Nm (7.4 lbf ft) (bigger ones) M5 - 5 Nm (3.7 lbf ft) (smaller ones) Indicator nuts torque are not stated in the service manual, you should hand tighten them. The OEM 13-10 mm wrench length is small enough not to oversight them. You can use a thread locker on the M6 screws, like Loctite 243 (blue, or medium-strength equivalent).
The contour of the heatshield plate and the milled part were not the same. There was a small interference which you can fix by filing on the plate. I didn't bother with it. Maybe it was a revision problem with the 2 part I don't know. Maybe if you write to them to be sure it is fixed?
If you would like to know tightening torques:
M6 - 10 Nm (7.4 lbf ft) (bigger ones)
M5 - 5 Nm (3.7 lbf ft) (smaller ones)
Indicator nuts torque are not stated in the service manual, you should hand tighten them. The OEM 13-10 mm wrench length is small enough not to oversight them.
You can use a thread locker on the M6 screws, like Loctite 243 (blue, or medium-strength equivalent).
God bless, this is exactly what I needed for the Bagoros tail tidy on my 890. Thanks a lot!
Damn man! :) YOu makes us proud :D
Is the brakelight bright enough?
I'm looking for a tailtidy, but i want the brakelight to be bright
It is an EU homologated brake light, so I would say it is bright enough.
@@Mr.Bearded.Mechanic compared to the stock, i'm not impressed. Thankfully i found a tailtidy that uses the stock rearlight
@@dannygernaat9961 Which one?
@@ludedude compitition werkes have a tailtidy for sale, witch uses the stock rearlight
Why didn’t the heat shield fit?? I just bought this kit and a heat shield. If I cannot mount the heat shield I won’t be able to use this kit.
The contour of the heatshield plate and the milled part were not the same. There was a small interference which you can fix by filing on the plate. I didn't bother with it. Maybe it was a revision problem with the 2 part I don't know. Maybe if you write to them to be sure it is fixed?