If you want text version of any of my Projects visit 👇👇 newphysicist.com/make-vertical-axis-wind-turbine/ 🔥 There You can read my experiences while I’m making that particular Project. Thank you. Happy Making.
Very good. You may put a glide cover as well to direct all the spreaded air falling on all leaves together to be directed to fall on one leaf, so it will boost the thrust to one leaf thus increase power output and an electronic voltage regulator (EVR) can give the steady regulated output. Keep it up.
I have just watched your video at midnight 1:00am and just went through the comments and I am surprised to see lot of foreigners rather than Indians appreciating your work and your work seems to be pretty smart and very creative. You seems to be a very good engineer and your renewable energy source work can be widely used across the country and get as much as benefit. Excellent work keep it up.
Brilliant, out of all the DIY VAWT's this is the simplest and probably the most efficient I've seen on UA-cam. There's no need for welding either cos the 'L' shaped brackets could easily be bolted on!. I'm making a v similar VAWT for my balcony, using scrap plastic guttering and a motor from a Hovermower ( aka Flymower) that I got from a skip. I'm making a smaller diameter turbine cos I have to be careful the council will tell me to get rid of it. So it's a 1'' chrome plated pipe that i am attaching metal coat hangers to, to hold the 'blades'. Each 'blade' will have 2 metal coat hangers that are attached to each other top to tail, to make it easier to attach to the pole and the turbine blades. I am planning on running 3 gene's off one VAWT, 1 x 240v/300w motor and 2 x micro gene' from an old broken DVD player and the Dynamo from my pushbike I can no longer ride due to knee problems. So the big gene will hopefully power the lights in my flat( aka apartment) , and the 2 micro genes to charge my phone and run a small water pump to irrigate a vertical garden I plan on building on my balcony, also from guttering.
+Kiyarose3999, its really very interesting when you explain your plan. First of all I'm taking this chance to thank you for your kind words. I hope you have checked my horizontal axis wind turbine video. Its really interesting.. Thanks for watching..🙋
I made something similar with one bike wheel added blades tail lines the rim with round magnet's hot glue gun mounted tail on old bearing like old wind mill but has stop no 360° but hand winding allows for low rpm .sorry I don't have knowledge of how to send pictures.
Excellent example for a R.E. Project! I’m going to access welding and the metal. Coming from a bike parts perspective , I may go for sealed bearings for the axle hubs.
I like the simplicity, the use of locally available material, and the overall concept. It could be easily scaled up and with a 48 to 52 volt dynamo, produce enough power to keep a large battery pack charged. Using a 4 12 volt battery pack, and a 48 volt dynamo would potentially allow you 4 different 12 volt accesses or a pair of 24 volt circuits depending on what the local standards are. This unit probably produces low amperage, but it is a start, using what looks like a sewing machine motor. It works, low amperage or high. The drive belt on a higher amperage unit might need an idler pulley to keep from slipping, but for this demo, it was not a priority. Keep on working, if it works, great, if it fails, figure out the problem and go at it again.
@@therealjimvick That one has been there since I began traveling north on 101 in the 70's. I think it used to serve as an attractant to a cafe or road stop. I haven't noticed it turning in a while. Compared to this one it *is* a monster. 😊
First, if you want harnest wind, go up. Upper than threes, with support wires. Second, to create energy from generator you almost always need 3000 rpm to 10.000 rpm. So you need transmission ratio 1:100. Also you need bigger wings, like 3 or 5 half barrels, size 200 liter. Branch lenght about 3-5 meter, vertical axle must be 2m longer and you need support wires from up and down fron it to branches. Then you get easily 1,5kW from normal car alternator. And those have regelator build-in. Normal car batteries are ok to storage this energy. Good luck!
RPM needed, power output, ratio, etc all vary on one critical element: the alternator specifications. Your advice should be avoided. Telling people "oh you need this ratio so you get all this RPM" is downright false. If you ever looked at an alternator spec sheet, you'd realize RPM becomes significantly less important. I picked up a brand new audi generator at a thrift store for $15 and the difference in power output from 1000 RPM and 2000 RPM is far greator than the difference in output from 2000 RPM to 10,000 RPM. Reference: Computer tested J&N 400-24200 alternator, brand new from Goodwill for $15 and it came with a spec sheet
@@catboyschrody RPM in normal wind generator wings is obout 20. So if you put your 2000 RPM generator there, you get nothing out. You need transmission, in big wind mills its around 1:80 to 1:120.
@@catboyschrody oh, so if you put your car alternator in different position its breaking laws of physics? Ok. I am engineer of electronics and sign out now.
@@jonel5001 Wind dynamics differ for vertical vs. horizontal turbines. VAWTs capture wind differently and need specific design adjustments. Claiming to be an engineer doesn’t automatically validate incorrect physics: Argumentum ad verecundiam
Neat project. I think that I will make one. I would only add that you align the center shaft better so the wheel bearings don't bind and cause drag. Also suspend it on its side and balance it using screws as weights. I noticed the wobble it had working at the end. This would also cause drag. Otherwise fabulous project, bravo!
Its good video, light materials that can withstand weather, bearings might need covering to prevent water damage and dynamo can be boxed in. You probably need to make a hole in the ground put rocks and concrete to make it solid and then wire it to car battery with cut out to prevent overcharge, but overall excellent design and dont let bad comments bother you its trial and error, test and improvise is the way to go.love it.
Great work you guys! Using bicycle wheels is pure genius! I hope you can do more, helping your neighbors, and make some money on this project, and then getting a MIG welder run with Argon gas. The welds would be beautiful and better. Keep it up.
I don't know why I noticed, maybe I was born a skeptic or to play the "Devil's Advocate," but all the while your windmill was turning so briskly; none of the vegetation was moving in the slightest! Not the leafy plants below or the limbs, leaves, or palm fronds level with the blades nor high above it? I didn't see evidence of a fan blowing air across the blades either because it would at least seemingly have affected the movement of the surrounding vegetation also. My suspicion is that you used the generator/motor as a motor to spin your turbine. It's still solid concept and functional, leaving only the question of production and efficiency. I know you show the meter and LED's but you don't hold the camera on them long enough to clarify anything. I'm guessing you used a fan.
I wish my DIY project could end up looking half as good as yours. Just got this on a rec vid for me glad I clicked on it. Really amazing work you did to work out the parts at such a lower cost to get the quality you did. I can just imagine some tweaking on gears how much output this could generate really well done.
Wind mills are an old technology, fraught with the limitations of wind. You have shown great creative energy with available materials. Keep up the fun work.
Very nicely done, very creative and even if your using off camera wind to demonstrate it works that's fine too very artistic as well. I like the use of light materials it makes the generator easy to turn and great use of local resources too the bike wheels are brilliant even using the old tube very ingenious my friend. Keep up the good work and don't let a few stupid skeptics stop you well done
Hi all guys. Pour much more water to cool the drill bit. I use a 40 ml syringe, which I empty slowly while drilling. I have drilled hundreds of holes and my drill bits are still sharp...
Nice work. Maybe invest in an impact drill. They are small and powerful. Saves the wrist and time for twisting. Imagine the possibilities. I enjoy tinkering. I dont get to do enough. These videos do make me want to go out and play.
Awesome! The only wind turbine that spins super fast even when all the trees around it are not moving 😂😂😂 Edit: yes, it's a great build (as in "awesome")👍, and yes I realize the wind is being artificially created. 🌬 I was jesting, kidding, joking, teasing :)
Voltage creation requires little mechanical energy input, put a 20 amp load on the alternator and watch the turbine stop immediately ..... that said the engineering aspect of this build is awesome I think vertical windmills are better by design than bladed ones just a humble opinion. Thanks for the time it took to make, edit and UL this video sir.
Legal, a ideia é boa! Mas... funciona só com vento ambiente também? ou só com um soprador? Estou perguntando por que aparentemente esta correia que você colocou esta freando muito o seu projeto. Ficaria melhor com engrenagens. Boa sorte.
It is a handmade application with bicycle wheels from the Savonius rotor, invented in 1922. If you have space where there’s a lot of wind, maybe you’ll get some energy. These types of rotors are very rarely used due to their low performance, in relation to their size. The advantage is that they do not need guidance and go very well where there are gusty winds that change direction quickly. All anemometers work like this. Darrieus rotors are more efficient, but often have trouble starting. Then, they are usually combined on the same vertical axis, the two: A large Dareius and a smaller Savonius starter It is possible to build them, with two halves of drums of 200 liters. Then, they are welded vertically forming the drawing of an S. That would be a simpler, cheaper and more effective way in terms of the force generated.
I like the bike wheel to start with, and the brackets - but since I don't weld, I'd have to reconfigure a few things. Might also go with a heavier PVC pipe, cut lengthwise, and a taller mast to get it higher in the windy air.
Thank you so much. Now I have an cheap method to get power in my Garden. You should produce this thing and sell it. It is genius. This could help to bring elektricity everywhere... Joerg from Germany
That's amazing, looks like a work of art too. Think I make this one rather than the other one with propellers on and wrong tail. Thank you for showing us how to make it. Bless you
2 роки тому
Ý tưởng rất hay, Thanks for share, love from Việt Nam 🇻🇳🇻🇳🇻🇳
Great idea , A Bigger scale with larger fins can produce more power and You can use a bigger Dynamo. Congratulations for a good work ... keep it on, dream more :) ... I subscribe , I like your job , Bless you .
Many critics will comment about your workshop environment, I know that, thank you for a tutorial. I have seen such projects here in Tanzania people are steel barrels in two pieces lengthwise.
Vertical turbines like this one have quite a significant part of the wind power canceling each other out as the wind hits the backside of each fin. If you build a case to house the turbine, with a curved front to channel the wind into a narrow opening so that the wind hits the front of each fin only, I bet you will at least double the efficiency.
Yes but the problem would be it would work only wind is flowing in direction of slot, then one back fin would be needed to turn the slot in direction of wind 😃
@@georgecarlinn6288 The case doesn't have to be fixed in place. With a little sensor and a motor, it costs very little energy to move the case around following changes in the wind direction.
Thats a cheap alternative for people that live in poor remote areas, as long as there is open ground wind will blow and you can easily charge a small battery or a large one if you have more then one of thease to power lights
I love watching homemade power projects like this. Combined with other sources, such as solar/PV panels and/or maybe hydro-microturbines, this could provide sustainable electricity for modern residences or businesses. Your video indicated that the maximum power output for a "VAWT" wind turbine like this would be about 12V. I'm curious about this: Is there a way to fabricate a bunch of these turbines, say, three or four, and disperse them around a residential yard and yet plug all of them into a household PV setup so that when the wind blows, the house batteries charge, and when the sun shines, the same batteries also charge? If so, what would that involve?
We can absolutely make use of the wind blows and the sunshine at the same time if it’s intensity is adequate. And by using best dynamos we are significantly increase the turbine output too. Living off grid is my vision! Thanks for your valuable feedback. Love it
I would advise to build 6 as a minimum, to get something meaningful, if your place is windy enough. You would need a charge controller if you plan to charge a battery, and first, to measure how much power you get of your setup. Making several measurements a day and averaging, so you can see how much your charge controller will have to take. I would put them as tall as I could, and not only one. These are cheap enough to build half a dozen.
This is a workshop prototype so don't expect it to be a perfect, tested finished production unit. I admire the innovative thinking and methods used to make the unit. Details such as power output (voltage amps) can quite easily be tested and will improve considerably as the ideas are refined. Don't knock the blower. It means that he does not have to wait for the wind before doing tests...
Great Project, keep it up. Scale up the size so an Automotive 12 volt 100 amp Alternator could be used. This would because of the fact that there is Deep Cycle 12v Batteries, voltage controllers, and the ability to Rectify 12 DC to 115 AC. All "Off the Shelf" Hardware. One = 12 v DC, Two = 24v DC, Four = 48v DC. = 100% Off Grid.
I’m confused as to whether or not this is safe because normal turbines (even those similar to this one) have struggled trying to work slow enough in high winds such that it doesn’t spin out and explode. I suppose in theory this would work but on a larger scale it’s hard to say how much this specific method could cost in materials and repairs to the high speed components.
Kaelan the apparatus must be constructed to withstand wind events that exceed historical maxima by a not insignificant amount without failure, but the generator itself generally blows itself up or tops out the capability of the rectifier Well before that.
Also use vertical hydroponics for food&we could truly have a self-sufficient society! If we turned stadiums I to vertical hydroponic gardening spaces we could end world hunger! (But that doesn't fit he narrative...)
Awesome, good job. I'm thinking about buying 2 400 watt vertical lantern style wind turbines. My idea is to mount them about 5 feet apart but one would be exactly 5' above the other one then connect the blades together with 6' half pipes similar to what u used.
Great insight into the build just subscribed and it’s a nice compact turbine I also have built a homemade 650 watts wind turbine, a treadmill motor turbine and a little but powerful ametek 30v turbine and built 2 diy solar panels, be careful in high winds one of my first turbines blew up 😕and now have only 2 wonderful turbines working daily 😊it’s very satisfying watching those things working, keep up the good work buddy 👍
Thanks for your support my friends. Make this project by yourself. Visit my blog newphysicist.com for step by step guide. 1. Cycle rim amzn.to/33BFH18 2. Dynamo1 amzn.to/2J3j8dW 3. Dynamo 2 amzn.to/31ozuUI 4. Camera I use amzn.to/2oVnn4m 5. Tripod I use amzn.to/32vM7hY
Since you are experimenting personality, also please try mounting the wheel parallel to the wall, with conventional blades formed on spokes,there by no of wheels can be mounted on high wall, without disturbing the other surroundings, make use of wind hitting the wall?
Giancarlo Cortese Molto probabilmente sì, ma direi che dovresti installare un motore più grande soltanto se hai intenzione di usarlo in un luogo con tanto vento
Hello, I congratulate you for the video and the turbine, what practical use do you give? Because doing all that to feed 4 led seems impractical, a big greeting from uruguay
+roberto grillo, thank you very much for your kind words. I used a less efficient dynamo (its not at least a dynamo, it is a DC motor). You can equip a high efficient dynamo or even an alternator to get more output. I always prefer to make projects with materials in hand. Keep in touch. 🙌
Todos estos proyectos se ven muy buenos, pero todo acaba cuando lo sometes a una carga de consumo, ejemplo el momento en que tiene que cargar unas baterías, la resistencia que hace la carga le resta velocidad al motor, y otro detallé, el generador no puede dar 12 voltios porque con eso no logra cargar las baterías, al menos debe dar 14 o más voltios y por lo menos 2 amperios, de lo contrario el proyecto sería un lindo adorno. Gracias por el video, la estructura se ve muy bien.
Gentle man giving power to motor in any way... Not taking power from that...everyone can notice that even not a single leaf of plants is moving but the wind turning the turbine😀😁😂
Hope someone can answer me. Can this work even in a place where wind minimum velocity is 4 2-4 m/s. I like the concept but can i use motor directly the the spinning wheel under the blades ro reduce friction cause by blades.
VAWT, compared to HAWT, are NOTORIOUSLY inefficient. They are noisier, vibrate a lot more and pose more drag. Turning on a few LED christmas tree lights is not anybody's idea of "generating electricity!" I guess it is a demonstration to show that wind energy is convertible to electrical energy but not to make any significant impact on energy production. Have you ever seen a VAWT farm of 100's of these types of turbines? It's always HAWT we see everywhere!
Hm ... fact is, that almost all large turbines are HAWT. Wawt ... noisier - maybe. Vibration ... why? Efficiency ... in term of blades cost ... probably. Drag ... isn't it what we want? Drag means more energy is took from the wind. What I see in VAWT is large mechanical problem with providing required strenght. Small turbines don't scale up easily to large sizes. However there are few medium size project. One was in Poland Kodun. ua-cam.com/video/ge45BjDFPW8/v-deo.html Dismantled or collapsed after few months, after strong wind.
Geezus, I love the superiority complex exhibited by keyboard warriors. Anyway, I didn't see any claims here that vertical was superior in any way to any other type of wind turbine so what's the beef? This was billed as an instructional on how to do it and a lot of the methods shown here are transferable to a horizontal. Please point us all to your video showing how one would construct a horizontal wind turbine.....oh yeah, didn't think so. The the content provider who did this video, I want to say thanks for your efforts.
Have you nothing better to do , but to be little peoples efforts , when try to improve things, just keep your shallow thoughts to yourself. Keep up your good work and keep looking forward on how you might improve on your system.👍❤️🙏
Hi, I'm from Brazil, São paulo - capital... Congratulations on your work and dedication. If you need anything, tell me. It would be great to have a friend so interested in these matters. Sorry about my english is not very good.
Hello mestre.. M wrking on the same concept but there is bit confusion between what to use either alternator or generator.. My mentor has fixed the alternator but what kind of alternator we need to use.. So that will get the output as 2kw..
If you want text version of any of my Projects visit 👇👇
newphysicist.com/make-vertical-axis-wind-turbine/
🔥
There You can read my experiences while I’m making that particular Project. Thank you. Happy Making.
You have a so good work (video), and than a so crap music.
It is better without music.
Mm
P6680
jjjl
Muy bien
Cc
I'm so proud to be a part of the human race when I see such brilliant ideas ❤ like this. Some day I pray we will all have free CLEAN energy.
This video is 6 years old
Bros 6 years late
I was searching for table fan in the video, appreciate ur honesty for showing in the end.
Very good.
You may put a glide cover as well to direct all the spreaded air falling on all leaves together to be directed to fall on one leaf, so it will boost the thrust to one leaf thus increase power output and an electronic voltage regulator (EVR) can give the steady regulated output.
Keep it up.
Id just plug it into a cheap $10 Amazon PWM solar battery charger, and not even bother with any other circuit now days.
I have just watched your video at midnight 1:00am and just went through the comments and I am surprised to see lot of foreigners rather than Indians appreciating your work and your work seems to be pretty smart and very creative. You seems to be a very good engineer and your renewable energy source work can be widely used across the country and get as much as benefit. Excellent work keep it up.
Diy designs are appreciated by anybody wanting to be off grid and save money. Inspiring work there
Brilliant, out of all the DIY VAWT's this is the simplest and probably the most efficient I've seen on UA-cam. There's no need for welding either cos the 'L' shaped brackets could easily be bolted on!. I'm making a v similar VAWT for my balcony, using scrap plastic guttering and a motor from a Hovermower ( aka Flymower) that I got from a skip. I'm making a smaller diameter turbine cos I have to be careful the council will tell me to get rid of it. So it's a 1'' chrome plated pipe that i am attaching metal coat hangers to, to hold the 'blades'. Each 'blade' will have 2 metal coat hangers that are attached to each other top to tail, to make it easier to attach to the pole and the turbine blades. I am planning on running 3 gene's off one VAWT, 1 x 240v/300w motor and 2 x micro gene' from an old broken DVD player and the Dynamo from my pushbike I can no longer ride due to knee problems. So the big gene will hopefully power the lights in my flat( aka apartment) , and the 2 micro genes to charge my phone and run a small water pump to irrigate a vertical garden I plan on building on my balcony, also from guttering.
+Kiyarose3999, its really very interesting when you explain your plan. First of all I'm taking this chance to thank you for your kind words. I hope you have checked my horizontal axis wind turbine video. Its really interesting.. Thanks for watching..🙋
I made something similar with one bike wheel added blades tail lines the rim with round magnet's hot glue gun mounted tail on old bearing like old wind mill but has stop no 360° but hand winding allows for low rpm .sorry I don't have knowledge of how to send pictures.
Excellent example for a R.E. Project! I’m going to access welding and the metal. Coming from a bike parts perspective , I may go for sealed bearings for the axle hubs.
I like the simplicity, the use of locally available material, and the overall concept. It could be easily scaled up and with a 48 to 52 volt dynamo, produce enough power to keep a large battery pack charged. Using a 4 12 volt battery pack, and a 48 volt dynamo would potentially allow you 4 different 12 volt accesses or a pair of 24 volt circuits depending on what the local standards are. This unit probably produces low amperage, but it is a start, using what looks like a sewing machine motor. It works, low amperage or high. The drive belt on a higher amperage unit might need an idler pulley to keep from slipping, but for this demo, it was not a priority. Keep on working, if it works, great, if it fails, figure out the problem and go at it again.
There’s a very large one north of San Rafael, California built with 55 gallon barrels. It’s a monster!
Don't buy this ! It is not true!
Energy harnessed from the ground. ( Look it up ) and 10 to 20 of these things in your back yard. No more electric company.
@@therealjimvick That one has been there since I began traveling north on 101 in the 70's. I think it used to serve as an attractant to a cafe or road stop. I haven't noticed it turning in a while. Compared to this one it *is* a monster. 😊
First, if you want harnest wind, go up. Upper than threes, with support wires. Second, to create energy from generator you almost always need 3000 rpm to 10.000 rpm. So you need transmission ratio 1:100. Also you need bigger wings, like 3 or 5 half barrels, size 200 liter. Branch lenght about 3-5 meter, vertical axle must be 2m longer and you need support wires from up and down fron it to branches. Then you get easily 1,5kW from normal car alternator. And those have regelator build-in. Normal car batteries are ok to storage this energy. Good luck!
RPM needed, power output, ratio, etc all vary on one critical element: the alternator specifications.
Your advice should be avoided. Telling people "oh you need this ratio so you get all this RPM" is downright false. If you ever looked at an alternator spec sheet, you'd realize RPM becomes significantly less important. I picked up a brand new audi generator at a thrift store for $15 and the difference in power output from 1000 RPM and 2000 RPM is far greator than the difference in output from 2000 RPM to 10,000 RPM.
Reference: Computer tested J&N 400-24200 alternator, brand new from Goodwill for $15 and it came with a spec sheet
@@catboyschrody RPM in normal wind generator wings is obout 20. So if you put your 2000 RPM generator there, you get nothing out. You need transmission, in big wind mills its around 1:80 to 1:120.
@@jonel5001 'Normal wind generators' are horizontal shaft and the mechanics and physics are different from vertical shaft generators
@@catboyschrody oh, so if you put your car alternator in different position its breaking laws of physics? Ok. I am engineer of electronics and sign out now.
@@jonel5001 Wind dynamics differ for vertical vs. horizontal turbines. VAWTs capture wind differently and need specific design adjustments. Claiming to be an engineer doesn’t automatically validate incorrect physics: Argumentum ad verecundiam
Neat project. I think that I will make one. I would only add that you align the center shaft better so the wheel bearings don't bind and cause drag. Also suspend it on its side and balance it using screws as weights. I noticed the wobble it had working at the end. This would also cause drag.
Otherwise fabulous project, bravo!
Its good video, light materials that can withstand weather, bearings might need covering to prevent water damage and dynamo can be boxed in. You probably need to make a hole in the ground put rocks and concrete to make it solid and then wire it to car battery with cut out to prevent overcharge, but overall excellent design and dont let bad comments bother you its trial and error, test and improvise is the way to go.love it.
Great work you guys!
Using bicycle wheels is pure genius!
I hope you can do more, helping your neighbors, and make some money on this project, and then getting a MIG welder run with Argon gas.
The welds would be beautiful and better. Keep it up.
I don't know why I noticed, maybe I was born a skeptic or to play the "Devil's Advocate," but all the while your windmill was turning so briskly; none of the vegetation was moving in the slightest! Not the leafy plants below or the limbs, leaves, or palm fronds level with the blades nor high above it? I didn't see evidence of a fan blowing air across the blades either because it would at least seemingly have affected the movement of the surrounding vegetation also. My suspicion is that you used the generator/motor as a motor to spin your turbine. It's still solid concept and functional, leaving only the question of production and efficiency. I know you show the meter and LED's but you don't hold the camera on them long enough to clarify anything. I'm guessing you used a fan.
Maybe the idea was to get 7.7 million views
At the end of video he shows where he used a fan lol
Mt thoughts also.
Should've watched till end
Fan mean "Satan" in Swedish 😂
Aromal - you're absolutely brilliant. A worldchanger.
우연히 자전거바퀴 2개를 구매했는데 이걸 만들어야겠어요. 좋은 내용 감사합니다.
I wish my DIY project could end up looking half as good as yours. Just got this on a rec vid for me glad I clicked on it. Really amazing work you did to work out the parts at such a lower cost to get the quality you did. I can just imagine some tweaking on gears how much output this could generate really well done.
plantas nem mexe as folhas so um palhaço pra achar que alguem acredita que tem vento rodando esta merda
Wind mills are an old technology, fraught with the limitations of wind. You have shown great creative energy with available materials. Keep up the fun work.
Very nicely done, very creative and even if your using off camera wind to demonstrate it works that's fine too very artistic as well. I like the use of light materials it makes the generator easy to turn and great use of local resources too the bike wheels are brilliant even using the old tube very ingenious my friend. Keep up the good work and don't let a few stupid skeptics stop you well done
Kev Kares
You are a fu cking liar
The leaves of the trees are not moving which means no wind 😄 timelapse 9:50
Great point
Hi all guys. Pour much more water to cool the drill bit. I use a 40 ml syringe, which I empty slowly while drilling. I have drilled hundreds of holes and my drill bits are still sharp...
i drilled few times using big machine and yeah it definitely needs more water
New Physicist - you are a genius! Kudos to you and your family must be very, very proud.
Muy bueno para las fincas en los llanos de Colombia. Desde Villavicencio Colombia me gusta muy buena idea.
पेड़ का एक पत्ता भी ना हिल रहा लेकिन ये फास्ट घूम रहा 😃😃😜😃😃
Motor is spinning the wheels not the wheels or wind making any electricity, it is a fake video
Now I have the same dream!
Thanks for open my eyes!
Congratulations 👏👏👏👏
Nice work.
Maybe invest in an impact drill.
They are small and powerful.
Saves the wrist and time for twisting.
Imagine the possibilities.
I enjoy tinkering. I dont get to do enough. These videos do make me want to go out and play.
Why thx for the nice video. I like that you re-use existing stuff. Keep going 👍🏻
Awesome! The only wind turbine that spins super fast even when all the trees around it are not moving 😂😂😂
Edit: yes, it's a great build (as in "awesome")👍, and yes I realize the wind is being artificially created. 🌬 I was jesting, kidding, joking, teasing :)
Its explained at the end of the video
maybe you skipped 11:38, this project really is awesome
If a fly wheel is attached with rootter
If a fly wheel is attached with the rooter its power to drive a denmo will be increased.
Watch till the end dude
Excellent! It seems the motor has helped to run the wind turbine.
Неплохо дружище !!
Только подними свой ветряк выше деревьев и на генератор поставь пружину для натяжения веревки а лучше ремень поставь
Fabulous. I'D LOVE TO SEE THIS DEVELOPED INTO A LARGER POWER SYSTEM.
Genius.
Bravissimo, adesso collega tutto l'occorrente.... 220 Volt
ua-cam.com/video/AyaV6eswOSc/v-deo.html
@@electrokym5756 i
Voltage creation requires little mechanical energy input, put a 20 amp load on the alternator and watch the turbine stop immediately ..... that said the engineering aspect of this build is awesome I think vertical windmills are better by design than bladed ones just a humble opinion.
Thanks for the time it took to make, edit and UL this video sir.
Legal, a ideia é boa! Mas... funciona só com vento ambiente também? ou só com um soprador? Estou perguntando por que aparentemente esta correia que você colocou esta freando muito o seu projeto. Ficaria melhor com engrenagens. Boa sorte.
thank you friend for your tutorial very simple to realise by a bushmen. I really appreciated it
It is a handmade application with bicycle wheels from the Savonius rotor, invented in 1922.
If you have space where there’s a lot of wind, maybe you’ll get some energy. These types of rotors are very rarely used due to their low performance, in relation to their size.
The advantage is that they do not need guidance and go very well where there are gusty winds that change direction quickly.
All anemometers work like this.
Darrieus rotors are more efficient, but often have trouble starting. Then, they are usually combined on the same vertical axis, the two: A large Dareius and a smaller Savonius starter
It is possible to build them, with two halves of drums of 200 liters. Then, they are welded vertically forming the drawing of an S. That would be a simpler, cheaper and more effective way in terms of the force generated.
Those are some pretty impressive welding skills
I like the bike wheel to start with, and the brackets - but since I don't weld, I'd have to reconfigure a few things. Might also go with a heavier PVC pipe, cut lengthwise, and a taller mast to get it higher in the windy air.
I was thinking of drilling a hole and putting a bolt through since I can't weld either.
Anyone noticed there is no wind, the trees arent moving maybe a blower was used to test?
@@joebee6906 did you see from 11:38 ?
I wonder if JB Weld would hold up alright.
Vertical axis wind generator seems to work very effectively, thank you
Thank you so much. Now I have an cheap method to get power in my Garden. You should produce this thing and sell it. It is genius. This could help to bring elektricity everywhere...
Joerg from Germany
Exactly you are right..
Excellent idea, the plastic turbine can be made a bit bigger to increase the pressure more stronger. Thanks
Love to see what he does with the rest of the bicycle!
All the negative comments, yes throw it in the trash, never is late to start with something, good job
Mashaa Allaah very nice information Jazak Allaah Khair Al Jazaa fi Duneya wa Al Akhirah Aameen 🌹🇮🇳🌹
Good project. Let do that for the climate's DISORDER !!
Sweet. All reclaimed parts. Premo! Hard work = good pay off. Tks
Good job, congratulations. Give things a second chance before destroying them 👍
That's amazing, looks like a work of art too. Think I make this one rather than the other one with propellers on and wrong tail. Thank you for showing us how to make it. Bless you
Ý tưởng rất hay,
Thanks for share, love from Việt Nam 🇻🇳🇻🇳🇻🇳
Just like the one my kids and I made 10 years ago! It was alot of fun!
Simple and effective wind generator thank you
Great idea , A Bigger scale with larger fins can produce more power and You can use a bigger Dynamo. Congratulations for a good work ... keep it on, dream more :) ... I subscribe , I like your job , Bless you .
Many critics will comment about your workshop environment, I know that, thank you for a tutorial. I have seen such projects here in Tanzania people are steel barrels in two pieces lengthwise.
Vertical turbines like this one have quite a significant part of the wind power canceling each other out as the wind hits the backside of each fin. If you build a case to house the turbine, with a curved front to channel the wind into a narrow opening so that the wind hits the front of each fin only, I bet you will at least double the efficiency.
Yes but the problem would be it would work only wind is flowing in direction of slot, then one back fin would be needed to turn the slot in direction of wind 😃
@@georgecarlinn6288 The case doesn't have to be fixed in place. With a little sensor and a motor, it costs very little energy to move the case around following changes in the wind direction.
ممكن رابط يوضح فكرتك
Sometimes it's ok to let something be simple and productive without complicating it.
Sometimes it's ok to let something be simple and productive without complicating it.
bicycle parts rock for so many things. very good
never stop doing what makes you happy
ভাই নমস্কার ও শুভ বিজয়া, দারুণ একটা আবিষ্কার,জয় হিন্দ
Thats a cheap alternative for people that live in poor remote areas, as long as there is open ground wind will blow and you can easily charge a small battery or a large one if you have more then one of thease to power lights
+Neikoo, that's what I meant. You got it. Thank you for valuable comment.👍👍
poor remote area please i will love to live there instead of the concrete jungle ....but i get what you saying
Nice! I haul scrap metal and get old bicycles all the time, but the rims are always aluminum!
I love watching homemade power projects like this. Combined with other sources, such as solar/PV panels and/or maybe hydro-microturbines, this could provide sustainable electricity for modern residences or businesses. Your video indicated that the maximum power output for a "VAWT" wind turbine like this would be about 12V. I'm curious about this: Is there a way to fabricate a bunch of these turbines, say, three or four, and disperse them around a residential yard and yet plug all of them into a household PV setup so that when the wind blows, the house batteries charge, and when the sun shines, the same batteries also charge? If so, what would that involve?
We can absolutely make use of the wind blows and the sunshine at the same time if it’s intensity is adequate. And by using best dynamos we are significantly increase the turbine output too. Living off grid is my vision! Thanks for your valuable feedback. Love it
I would advise to build 6 as a minimum, to get something meaningful, if your place is windy enough. You would need a charge controller if you plan to charge a battery, and first, to measure how much power you get of your setup.
Making several measurements a day and averaging, so you can see how much your charge controller will have to take.
I would put them as tall as I could, and not only one. These are cheap enough to build half a dozen.
12v is not power. 12v is voltage.
@@rayh592 But even a few amps generated and fed into a battery bank @ 12v can easily be inverted into 120v AC
If you take another more Wide dynamo you can also reload the Batterie 24v ...ou 12v your work is very good and Nice 👍 bravo !
Love whirlygigs that power party lights! But can we appreciate the irony that he used an electric fan to blow the generator to make electricity 😂😂😂
This is a workshop prototype so don't expect it to be a perfect, tested finished production unit. I admire the innovative thinking and methods used to make the unit. Details such as power output (voltage amps) can quite easily be tested and will improve considerably as the ideas are refined. Don't knock the blower. It means that he does not have to wait for the wind before doing tests...
Great Project, keep it up.
Scale up the size so an Automotive 12 volt 100 amp Alternator could be used. This would because of the fact that there is Deep Cycle 12v Batteries, voltage controllers, and the ability to Rectify 12 DC to 115 AC. All "Off the Shelf" Hardware.
One = 12 v DC, Two = 24v DC, Four = 48v DC. = 100% Off Grid.
The more people who get on board with renewable energy like wind, solar, hydro/tidal and build storage and distribution, the better
I’m confused as to whether or not this is safe because normal turbines (even those similar to this one) have struggled trying to work slow enough in high winds such that it doesn’t spin out and explode. I suppose in theory this would work but on a larger scale it’s hard to say how much this specific method could cost in materials and repairs to the high speed components.
Kaelan the apparatus must be constructed to withstand wind events that exceed historical maxima by a not insignificant amount without failure, but the generator itself generally blows itself up or tops out the capability of the rectifier Well before that.
Also use vertical hydroponics for food&we could truly have a self-sufficient society! If we turned stadiums I to vertical hydroponic gardening spaces we could end world hunger! (But that doesn't fit he narrative...)
Awesome, good job. I'm thinking about buying 2 400 watt vertical lantern style wind turbines. My idea is to mount them about 5 feet apart but one would be exactly 5' above the other one then connect the blades together with 6' half pipes similar to what u used.
Sería mejor usar el centro de circunferencia para generar energía, quizás sea menor la velocidad, pero la fuerza es mayor; Buen video saludos.
The greater the speed of the alternator, the greater the output. Taking advantage of pulley ratios gives this setup a greater output
Nice Work 🤗i save all Motors i can find. For example old washmashine, lightmashine from Car🙂👍
O cara é um GÊNIO! abriu a minha idéia!
Obrigado. mantenha contato.
!great job!What are the specs:
How MANY rom on motor? Volts?Amp? Wind breeze?
Great insight into the build just subscribed and it’s a nice compact turbine I also have built a homemade 650 watts wind turbine, a treadmill motor turbine and a little but powerful ametek 30v turbine and built 2 diy solar panels, be careful in high winds one of my first turbines blew up 😕and now have only 2 wonderful turbines working daily 😊it’s very satisfying watching those things working, keep up the good work buddy 👍
I am building one like, I would like some feedback on your experience/ will put a "blue wind" motor/maybe a maglev magnets/thrust bearing
Esos inventos si funcionan uno no hay trucos, como muchos k hacen.mil bendiciones Dios le bendiga
Thanks for your support my friends. Make this project by yourself. Visit my blog newphysicist.com for step by step guide.
1. Cycle rim amzn.to/33BFH18
2. Dynamo1 amzn.to/2J3j8dW
3. Dynamo 2 amzn.to/31ozuUI
4. Camera I use amzn.to/2oVnn4m
5. Tripod I use amzn.to/32vM7hY
New Physicist where you from ?
+syed mohamed, From India👍
New Physicist
Don't sweat the haters
They don't have 47k subs
Keep up the Great Work
Congratulations. I have seen a lot of videos regarding this topic. This one is between the best ones.
Ricardo Ambrosio
many thanks, a great practical implementation of obtaining alternative green energy
Great skill. You can be self reliant.
h
Since you are experimenting personality, also please try mounting the wheel parallel to the wall, with conventional blades formed on spokes,there by no of wheels can be mounted on high wall, without disturbing the other surroundings, make use of wind hitting the wall?
I think you had a fan blowing on your windmill...you can see by the surroundings that not a leaf is blowing
I think... magic wind to do😂😂😂
Yep...I think maybe he had an air compressor to help things move along. Absolutely no wind in the background 🤔
Does it matter tho because that's the same thing he's just controlling the air instead of waiting for it
You guys didn’t watch the whole video. at the end he states and shows that he “used a table fan to get enough wind!!”.
cerdas. saya sangat menyukai ide yg anda sajikan. terimakasih
Truly Excellent!
Excellent idea for home or camper van. Good battery charge alternative option to solar.
Nem assisti todo o vídeo, já achei o progeto brilhante 😃😃
جزاک اللہ خیرا بھائی جان
This guy needs to take a welding course.
Good proof of concept! Now see about scaling it up all round.
I like your project very much.
+renjinikumari n k, thank you miss.😀
Find ich total gut, warum hat noch nicht jeder so ein Ding im Garten oder auf dem Dach??????😂😭😭😭😭😛🤪
How dose this work while tree leaves next to it standstill?
A simple electric fan to illustrate the functionality of the turbine. It works.
Adaptability is the future.❤🙏👍
Bravissimo.. idea geniale..
Tu pensi che si possa usare un motorino piu' grande ??
Complimenti ancora
Giancarlo Cortese Molto probabilmente sì, ma direi che dovresti installare un motore più grande soltanto se hai intenzione di usarlo in un luogo con tanto vento
We in Indonesia appreciation for your create friends..with small blowing of the wind but still turn normally up..
WELL DONE
You are a genius I really like it 1000
Hello, I congratulate you for the video and the turbine, what practical use do you give? Because doing all that to feed 4 led seems impractical, a big greeting from uruguay
+roberto grillo, thank you very much for your kind words. I used a less efficient dynamo (its not at least a dynamo, it is a DC motor). You can equip a high efficient dynamo or even an alternator to get more output. I always prefer to make projects with materials in hand. Keep in touch. 🙌
I hope you keep uploading videos like this one of interesting
+roberto grillo, off course I'll. I'm a renewable energy Passionate. Keep in touch. Thanks for support.
@@newphysicist
Hi,
Todos estos proyectos se ven muy buenos, pero todo acaba cuando lo sometes a una carga de consumo, ejemplo el momento en que tiene que cargar unas baterías, la resistencia que hace la carga le resta velocidad al motor, y otro detallé, el generador no puede dar 12 voltios porque con eso no logra cargar las baterías, al menos debe dar 14 o más voltios y por lo menos 2 amperios, de lo contrario el proyecto sería un lindo adorno. Gracias por el video, la estructura se ve muy bien.
Add on a 220amp 12v alternator to charge 3 12v Storage Batteries & connect to 10KW Inverter & you can run a house.
How to do
Gentle man giving power to motor in any way... Not taking power from that...everyone can notice that even not a single leaf of plants is moving but the wind turning the turbine😀😁😂
Hope someone can answer me. Can this work even in a place where wind minimum velocity is 4 2-4 m/s. I like the concept but can i use motor directly the the spinning wheel under the blades ro reduce friction cause by blades.
the speed is very slow if you direct it to rotor blade
Chingon ese proyecto boy a construir una saludos desde Mexico
VAWT, compared to HAWT, are NOTORIOUSLY inefficient. They are noisier, vibrate a lot more and pose more drag. Turning on a few LED christmas tree lights is not anybody's idea of "generating electricity!" I guess it is a demonstration to show that wind energy is convertible to electrical energy but not to make any significant impact on energy production. Have you ever seen a VAWT farm of 100's of these types of turbines? It's always HAWT we see everywhere!
Hm ... fact is, that almost all large turbines are HAWT.
Wawt ... noisier - maybe.
Vibration ... why?
Efficiency ... in term of blades cost ... probably.
Drag ... isn't it what we want? Drag means more energy is took from the wind.
What I see in VAWT is large mechanical problem with providing required strenght. Small turbines don't scale up easily to large sizes.
However there are few medium size project. One was in Poland Kodun.
ua-cam.com/video/ge45BjDFPW8/v-deo.html
Dismantled or collapsed after few months, after strong wind.
By generating 12v we can use inverter which generates AC Electricity output of 2kw
Geezus, I love the superiority complex exhibited by keyboard warriors. Anyway, I didn't see any claims here that vertical was superior in any way to any other type of wind turbine so what's the beef? This was billed as an instructional on how to do it and a lot of the methods shown here are transferable to a horizontal. Please point us all to your video showing how one would construct a horizontal wind turbine.....oh yeah, didn't think so. The the content provider who did this video, I want to say thanks for your efforts.
Have you nothing better to do , but to be little peoples efforts , when try to improve things, just keep your shallow thoughts to yourself. Keep up your good work and keep looking forward on how you might improve on your system.👍❤️🙏
Have ever heard of inverters
Good for free energy👌👌
At 10:20 we saw moter is running turbine. There is no wind on trees. It do not generate electricity.
Safdar Karim he might be using a fan?
watch full video he telling that he used tabel fan
Safdar Karim how is the motor running it when its not hooked up to my electricity.
Thanx, like the simplicity and easy available materials used. You are great! Blessings 🙏❣️💞
Hi, I'm from Brazil, São paulo - capital...
Congratulations on your work and dedication. If you need anything, tell me. It would be great to have a friend so interested in these matters. Sorry about my english is not very good.
+Mestre do Oraculo, Thank you for your kind words.. 🌸🌸
Mestre do Oraculo amazing
Hello mestre.. M wrking on the same concept but there is bit confusion between what to use either alternator or generator.. My mentor has fixed the alternator but what kind of alternator we need to use.. So that will get the output as 2kw..
@@yogeshgiri2424 yes, that is also I want to know , how to get atleast 2k of power.