Thank you for this GREAT visual, You may have saved my marriage. My husband is so frustrated and I picked this crazy paver out. I felt horrible. I thought the irregularness would make it simple but I was wrong! Thank you, again :)
Thanks for showing how to do it ,I spent about 7 hours trying to lay them and after I watched the video it took me about 20 minutes to lay 100sq ft of them .it really helps ,keep doing it
You have got to be kidding me... you mean to tell me that I’ve been on the verge of suicide trying to lay these beautiful pavers and all i had to do was watch this video? Thanks so very, very much
If not for your helpful visual lesson, I would stiil be trying to figure it out. It is impossible to lay these without knowing the pattern. Once you know that the "pointy" ends line up and the 7 stone pattern makes a flower'like design which makes it so easy, you can take the pattern anywhere, you have to make cuts to make a turn and fill in the edges. Thank you again!
No you don't. But understand that once you lay any [aver, whether it is a center or a pedal, it sets the whole picture since the pavers don't bend. The pointy ends of the flower will make a straight line above and below and you move the design by adding new flower pedals to the right or left. Lay a few flowers out and you will see how each pedal lines up as a pedal of another flower. That is the secret, no paver is alone, it is a pedal of two flowers. So start wherever but know which pedal it is of the flower and go from there. Hope this helps.@@teresajohnson4844
Thank you for the excellent video. Do you know who stocks these pavers in or near Kansas, besides Lowes. I am having trouble locating tan or sand colored pavers.
I just got these yesterday. And I have watched this video for at least 10 times. I think pavers look different. But they have exactly the same dimensions. Correct? Thanks
Hey? Question? I was getting these butterfly shapes is there a way to keep that going is this the only configuration you suggest? I love these, this is artistry, but they should come with directions!
I’m trying to us them for a walkway from my patio to my pool an can’t figure out how to make them only 2wide the hole way it seems to always try and grown out words.
Thanks for the video,this was kicking my ass .i could not figure out the sequence to get them to fit. Once I watched your video it took me minutes to finish.
I just hope that Lowe’s will take mine back. It looks simple and I was able to assemble the pattern on my driveway but when I tried to copy it on my prepared bed no luck. I thought that I would number or mark them in someway but if I do that Lowe’s probably won’t take them back.
Thank you so much for posting this. I’ve been trying for the life of me for the last three days to figure out the layout pattern for these pavers I bought a few years ago at Lowe’s!
Thank you for this GREAT visual, You may have saved my marriage. My husband is so frustrated and I picked this crazy paver out. I felt horrible. I thought the irregularness would make it simple but I was wrong! Thank you, again :)
Thanks for showing how to do it ,I spent about 7 hours trying to lay them and after I watched the video it took me about 20 minutes to lay 100sq ft of them .it really helps ,keep doing it
Victor, you have done a public service with this video! Thanks!
You have got to be kidding me... you mean to tell me that I’ve been on the verge of suicide trying to lay these beautiful pavers and all i had to do was watch this video? Thanks so very, very much
Thank you for making this video. You saved me from going crazy lol or breaking them 🤣.
If not for your helpful visual lesson, I would stiil be trying to figure it out. It is impossible to lay these without knowing the pattern. Once you know that the "pointy" ends line up and the 7 stone pattern makes a flower'like design which makes it so easy, you can take the pattern anywhere, you have to make cuts to make a turn and fill in the edges. Thank you again!
Do you have to start in the middle to make the flower pattern and work outward then? Or start from an edge?
No you don't. But understand that once you lay any [aver, whether it is a center or a pedal, it sets the whole picture since the pavers don't bend. The pointy ends of the flower will make a straight line above and below and you move the design by adding new flower pedals to the right or left. Lay a few flowers out and you will see how each pedal lines up as a pedal of another flower. That is the secret, no paver is alone, it is a pedal of two flowers. So start wherever but know which pedal it is of the flower and go from there. Hope this helps.@@teresajohnson4844
Thank you for the excellent video. Do you know who stocks these pavers in or near Kansas, besides Lowes. I am having trouble locating tan or sand colored pavers.
THANK YOU!!! Wife and I were really struggling, but this makes it very clear. You are a Hero!
Oh my gosh, thank you so much. We were having the hardest time! Would you recommend grouting or pea pebbles in the seams?
I just got these yesterday. And I have watched this video for at least 10 times. I think pavers look different. But they have exactly the same dimensions. Correct? Thanks
Hey? Question? I was getting these butterfly shapes is there a way to keep that going is this the only configuration you suggest? I love these, this is artistry, but they should come with directions!
Yes thanks, buy why do landscaping store sell this without directions...
I’m trying to us them for a walkway from my patio to my pool an can’t figure out how to make them only 2wide the hole way it seems to always try and grown out words.
How am I supposed to start in the center and make cuts against the house? It could be lack of skill on my part I’m just not seeing it
This really helped us a lot! Thank you!
Thank you!!!
Spot on, straight forward, no bs, exactly what I needed. Thank you!
I like this comment!. It's definitely my style. Provide the information required and get it done.
Thank You so much! Enormously helpful!
Thank you sooo much!!! You don't know how helpful this was.
Two thumbs up on the visual!!
Thank you very much.😎
Thanks, this was super helpful.
Thank you so much for the tutorial! This was so helpful!
Do you have to cut the edges to get a straight line by the edge?
Yes. Diamond 💎 blade
Thank you !!! You da man!!!
Wow, I've been wrestling with these for days. THANK YOU! That was the most informative video. Much appreciated!!!
Thanks so much
Thanks
Thanks
Thanks for the video,this was kicking my ass .i could not figure out the sequence to get them to fit. Once I watched your video it took me minutes to finish.
Dude THANK YOU!! Man I kept getting stuck!
Lmfao been fighting this for an hour and came to UA-cam and straight to your channel . Thanks !
Victor, very helpful info and very well delivered! Thanks!
Great video, is there a way to make a 90 degree turn using these papers. I want to go out a door 5 feet and left turn 5 feet....ty
This just saved my life! I was getting SO frustrated!
Would you mind sharing the name of the pavers that you used for this demonstration?
Thank you so much Victor! You saved my afternoon!
Thanks so much, great video explaining exactly how to lay them together!!!
Thank you so much as we are currently using these stone slabs!
Omg you saved me a bunch of headaches. Thank you bro
Could not have done this without your video! Thank you!
What about the edge? Do you just chip of the corners
Awesome thank you so much God Bless
Thanks so much.You really helped me out.
I just hope that Lowe’s will take mine back. It looks simple and I was able to assemble the pattern on my driveway but when I tried to copy it on my prepared bed no luck. I thought that I would number or mark them in someway but if I do that Lowe’s probably won’t take them back.
Use chalk or a grease pencil. The marks would come right off
Thank you so much for this!
Thank you so much for posting this. I’ve been trying for the life of me for the last three days to figure out the layout pattern for these pavers I bought a few years ago at Lowe’s!
What edger works best for uneven edges like this?
What color is this?
THANK YOU!!!!
Thank you!!!
How do you square it off to meet up with a fence or existing patio?
Yup. You have to cut it with a diamond 💎 blade saw if you want a straight edge. Or you can try a 2lb+ hammer 🔨 and chisel
Dude you just saved my relationship! My Fiancé was hell bent on doing this her way. I’m glad I found this video!
This is very helpful, it makes visualising and designing my paver-style a lot easier.
Thank you! Now I can finally lay my pavers.