MATTE BLACK SAMURAI PAINT Tutorial!

MATTE BLACK by SAMURAI PAINT!
Paints used;
1. UCH210 Surfacer
2. 29/109A Flat Black
3. 128A Flat Clear
Looking for Samurai Paint?
Clink the link below and get what you need!
Shopee.ph/samuraiph

[@suissacin1026]

Where to buy samurai paint?
Click the link below
Shopee.ph/samuraiph

[@jaymondapitan3328]

Boss matte black na yung pintura ng motor ko tapos repaint ko sana matte black para mag mukang bago, need pa po ba mag primer?

[@suissacin1026]

@@jaymondapitan3328 stock psint pa po ba yan sir?

[@suissacin1026]

Pwede naman rekta pero mas advisable pag complete process para mas matibay at mas maganda yung outcome sir.

[@jaymondapitan3328]

@@suissacin1026 stock paint po boss. Sige sir susundin ko yung complete process. Salamat sa pag sagot

[@mellowmusic1245]

Thank you for the helpful video sir, but i want to ask mag repaint kasi ako ng mags, ano po magandang gamitin na surfacer and top coating for mags at mga ilang can ang magagamit sa 2 mags kung 'tig ta-tatlong patong ang surfacer, main coat at top coat?

[@lamperadavejeremarkb.3646]

Boss pede kaya lihain lng mabuti at hindi na mag primer?

[@suissacin1026]

@@lamperadavejeremarkb.3646 kung stock paint pa boss okay lang pero pag ginamitan na ng ibang paint mas okay magprimer para iwas crack at protection nadin sa old paint.

[@Ronmalic]

boss baguhan lang need paba alisin yung stock paint o rekta surfacer na?

[@suissacin1026]

@@Ronmalic liha lang konti gamit 400 grit tapos rekta surfacer na boss.

[@Ronmalic]

@@suissacin1026 salamat boss, tanong lang ulit mga ilan cans kaya para sa buong fairings ng fazzio?

[@suissacin1026]

@@Ronmalic 2 cans each sir kasya na

[@poningtigas1237]

Ask ko lang pwede patungan na un gloss black top coat nun helmet patungan ko Ng flat clear lalabas ba kulay nun flat?

[@memekun2280]

Time gap between each application?

[@suissacin1026]

15-20 mins sir

[@KenCyber98]

Okay lang ba sir sa Matte black na paint ang nabili ko na clear is glossy clear para sa top coat?

[@suissacin1026]

@@KenCyber98 magiging glossy din ang result sir pag glossy clear binuga nyo.

[@suissacin1026]

Flat Clear po dapat kung gusto nyo ng matte finish.

[@hasansakib3969]

Please reply me i am so beginner...i need to colour my bike...my present tank colour is red... I want to do full smooth finishing matte black...please please tell me step by step what i need to use

[@suissacin1026]

Sand your tank using 400grit sand paper util it's smooth.
The paints used in the video is all what you need but instead of UCH210, use UCY113 as Surfacer since it is metal.

[@goldenbrewchannel4071]

@@suissacin1026 ano po difference ng Ucy113 and Uch210? Bumili po kasi ako nung Uch210 as primer sana dun sa ipapaint ko na bakal, di po ba yun pwede?

[@suissacin1026]

@@goldenbrewchannel4071 UCY113 pang bakal UCH210 for plastic po. Pero okay lang din Naman gamitin Ang uch210 sa bakal

[@cavitecheckpoint]

Nice one paps. Ask ko lang pag i repaint ko firings ng ng duke 390 v2 yung front and back ilang can's per color ang magagamit ko sakto na po ba 2 cans per color? Keep up the good work...

[@suissacin1026]

Yes sir sakto na po 2 cans each color.
Thanks for the compliment sir🖤

[@gongzilla3666]

Paps kakapanood ko lang ng vids mo. Mga ilang bote para sa ns200 flairings? Pati na sa mags?

[@suissacin1026]

3 cans each sir kasya na siguro

[@Ashley-sd7fk]

Hello Po sir Yung Bago Po ba na matte black hight temp. Di na Po ba kailangan magprimer at Meron Po bang clear para doon?
Thanks Po sana Po masagot

[@suissacin1026]

Yes sir di napo need magprimer. Di nadin po need iclear

[@johnroviccoquilla7663]

boss need pa ba clear coat pag matte black lang gagawin? or okay na 2-3 coat ng flat black?

[@suissacin1026]

Mas okay pag may clear boss para mas durable ang paint. Meron din flat clear sa samurai para sa mga matte finish.

[@johnroviccoquilla7663]

​@@suissacin1026 maraming salamat boss.

[@zyanna320]

Thank you po sa tutorial... Tanong po pwede na po walang topcoat o mas okay pag may topcoat?

[@suissacin1026]

Pwede Naman po walang top coat Pero mas matibay pag may topcoat.

[@zyanna320]

Thank you po sa sagot... May tutorial po kayu sa Pearl White?

[@zyanna320]

Plan ko po mag repaint ng motor ko po at 1srtym ko po mag paint any advice po ...

[@Gepabz]

Pag sa honda beat po ilang cans po?

[@suissacin1026]

@@Gepabz 2-3 cans each color paps kasya na.

[@jamesmanalo7446]

Ay sa metal po pala

[@suissacin1026]

Pwede din po, palitan mo lang yung uch210 ng ucy113 metal primer.

[@rommelandamon5290]

Boss yung surfacer yan ba yung primer?

[@suissacin1026]

Yes po boss

[@manofwheel16]

Para sa fairings po ba to lods?

[@suissacin1026]

Yes sir

[@jaybusmeon3509]

pwede poba sa alloy yan?

[@suissacin1026]

Pwede po sir. Gamit ka lang ucu19 or ucy113 metal primer

[@mikennytv3967]

Paps ilang patong na matte black ba need

[@suissacin1026]

2-3 paps. Pag nakuha mo sa 2nd coating goods na yon

[@oscarpare7629]

Bossing ask lang sa nmax v1 ilan ang magagamit

[@suissacin1026]

2-3 cans each boss kasya na

[@oscarpare7629]

@@suissacin1026 ty bossing

[@jamesmanalo7446]

Pede po ba sa plastic ipintura yan

[@suissacin1026]

Yes po

[@ronelldelacruz8246]

Hnd ba pwd wlang surfacer?

[@suissacin1026]

Pwede naman boss pero mas okay pag may srfacer para mas matibay. Protection nadin sa old paint

[@stevejohnseguiro2358]

Hndi po ba nag Crack or faded

[@suissacin1026]

Hindi po

[@SnakeEye0515]

Yung flat black naging satin black

[@royalestanislao5993]

Boss tanong lang sa fairings po ba need paba lihain or diretso primer na ?

[@suissacin1026]

Need muna lihain boss para mas makapit ang pintura

[@royalestanislao5993]

@@suissacin1026 Salamat boss sa response . tama 400-1000 grit tapos wet sanding diba ?

[@suissacin1026]

@@royalestanislao5993 yes boss tama