We work our ass off. Tools are major parts of our lives. Nothing wrong with wanting what you like. I just bought a set of 3/8 shallow socket set from gearwrench. I didn't NEED them. I have the snap on set and a craftsman set from when I first started. However, I WANTED them. I pay my bills, take care of my dues, and do what needs to be done everyday. If I see something I want and can reasonably do it, I will. Nice haul man. Love the knipex set.
You're gonna love those air hoses, I just bought the same ones for my 1-inch air gun and they work great, and they aren't all bunched up and knotted when you use them.
Awesome haul JC! You will love the flexzilla hoses, yes they will get dirty quickly and if you use any kind of solvent to clean them will turn them a dingy yellow color from green but they are awesome, I've had my 3/8 hose over 2 years and use it almost daily.
Nice haul. I love those little cob lights. Especially for under $25! I grab those before my rechargeable lights, because I don’t have to undo the charging cable. I 100% agree on the comfort grips. I only use mine during the winter.
First time I saw a drill like that was when Jonathan W used and talked about his. I thought about it when you were drilling your frame. Good on ya. As a kid I worked with some pile bucks, after driving the piling, a 2 inch hole was bored for lashing and securing them together. I once saw the bit grab, and the gear drive drill flipped one guy overboard and broke another guys arm.
Good haul. Flexzilla hoses are very nice. Yes, they will get dirty fast but who cares. The trade off is a frustration free hose. Great Knipex haul as well. Very nice.
Now that’s a tool haul! If I had to sum it up with a single word it would be wow!! I sure didn’t realize the pliers I sent you didn’t have the push button on them. I think you will be amazed with the mag drill!! Awesome video sir!!
brian stuart I wasn’t aware this gentleman had to consult his financial history with you sir! If he would likely to start a fire with 100$ bills I find that to be his business!
brian stuart it’s just the simple fact that until you work for me and pay my bills I’ll do whatever I would like to do with MY money. If you can’t go buy something that’s your problem! If I want to go buy a entire Snap-on truck and set it on fire and video to watch it burn I’ll do just that. Once again MY business!
brian stuart...it never ceases to amaze me at the number of ignorant small men there are in the world. i understand now why you are so upset and i have to apologize....i offended you when i spent all that money on these tools at one time because you realized it was more than you will make this year. keep your head up little buddy...i hear minimum wage is going up $0.10 per hour.
Sweet tool haul. I got that same 1” impact gun with the free tire buffer. I just couldn’t pass that deal up ! I also bought some of those flexzilla hoses to replace some in the shop. Great choices.
Great video thanks brother. Great tool haul lots of great tools. I like the magnetic drills. Great for frame rails when you want to be right there with the hole. I just couldn't get over the weight of them. I have used them for work and at the race shop old corded ones. I hope the one you have is more user friendly I would hate to see the Gradall hooked up to it to move it around. JC I'm not going anywhere I like watching the projects. I hope it gets warmer soon. Thanks again see you in the next video
thanks scott. the mag drill is much heavier than i expected....i have a truck that i want to shorten the frame and move the axle forward and i refuse to drill all the holes 5 times each again....i hope it works half as well as i have been told.
Nice haul J.C., just watched the first part of the axle swap video...I converted a 2wd Chevrolet to a 4wd back in the early 90s and it wasn't the easiest thing to do with a couple of jacks and some stands, you're making it look too easy...LoL...Have a great day...
Quick funny story I was watching your first live stream that died, where you wife was cleaning the cab and you were talking about superdutys rotting at the sills. Well all of a sudden the quality gets much better and you are now on the driver side with your wife cleaning a gutted with super duty cab and then you start talking about selling her van and I realize it is a completely different video. Both videos your wife is cleaning a gutted super duty cab, your wife is certainly a keeper JC.
Tell your wife to get detail brushes for detailing Interiors and a airline to blow the excess out it works perfect every time a toothbrush will scratch
New to your channel love it you get the tools you need then the ones you want that is the best way. The trim tool is great I have the whole set and you will like the flexzill hose.Great haul
I'd be very interested to compare that mag drill to a Hougen corded drill. I'm skeptical on how much holding power the magnet will have on battery power. It would suck to have it pop loose mid-cut working in a frame wedged in under a body behind a tire.....
i would have liked to have bought a hougen but it was just too costly for my budget and the amount i would end up using it. i was skeptical about the magnet also. we will see how it does on the next frame shortening project i do.
Folks who have those Snap On non marring panel sets seem to love them. I’ve got a cheapy set from Harbor Freight. That panel popper you got is my favorite. Own 3 or 4 different. It’s the best. Have that hose pick set too but looking at the flat bladed set Koon Trucking got. That M18 Fuel magnetic drill looks badass. Didn’t even know they made it.
That's quite the haul for sure, I can't wait for you to use that Milwaukee Magnetic Cordless Drill, that should be something to see if it can hog thru doing holes and with as many uses as they say it can. Milwaukee makes some nice stuff, it will be interesting to see how she goes. Did you use your Milwaukee impacts yet?
i have a couple of frame drill projects coming up and will be putting it to the test...i am not easily won over on tools so i will be giving a very honest review of the tool....i have used my new milwaukee impact some. i have been wanting to get some covers for them before i beat them up.
that mag drill would be handy, i know what you mean about drilling through the frames, had to drill alot of holes for toolboxes on the hooktrucks, and it sucked alot being double wall frames
listen cooter...i thought the same thing you did so i asked the rep...i wasnt 100% confident in the way he answered the question so i did the same thing.
on a corded mag drill an electromagnet is used. the one i have has the magnet on a switch. you can sit it on something and the magnet does nothing until you hit the switch. on the other hand I have no clue about the milwaukee
Spend that kind of money on tools and have no shop heat... That magnetic drill is 65 pounds....Them things are way over 2 grand.....Could have had a good furnace.
Im no sissy. i work in the weather all year around. heat doesnt get the trucks fixed....having thr right tools is what is important to me. if you need heat to fix your stuff, then by all means....spend your money on heat. besides, what good would a furnace do in that building with absolutely no insulation....
We work our ass off. Tools are major parts of our lives. Nothing wrong with wanting what you like. I just bought a set of 3/8 shallow socket set from gearwrench. I didn't NEED them. I have the snap on set and a craftsman set from when I first started. However, I WANTED them. I pay my bills, take care of my dues, and do what needs to be done everyday. If I see something I want and can reasonably do it, I will. Nice haul man. Love the knipex set.
that is how i see it. i am responsible enough to know that wants come after needs.
The knipex tools are the best!
Two of my favorite brands of tools! Snap On and Knipex 👍
That is a nice tool haul right there J.C.! That mag drill will be a life saver for you.
i think it will be a life saver also.....a time saver for sure!
You're gonna love those air hoses, I just bought the same ones for my 1-inch air gun and they work great, and they aren't all bunched up and knotted when you use them.
i hope they work half as well as they say!
Awesome haul JC! You will love the flexzilla hoses, yes they will get dirty quickly and if you use any kind of solvent to clean them will turn them a dingy yellow color from green but they are awesome, I've had my 3/8 hose over 2 years and use it almost daily.
i will get over the filthy hose once i fall in love with being able to roll it up regardless of the temperature!
Nice haul. I love those little cob lights. Especially for under $25! I grab those before my rechargeable lights, because I don’t have to undo the charging cable. I 100% agree on the comfort grips. I only use mine during the winter.
i am not sold on the comfort grip....but my hands do appreciate them in the winter.
First time I saw a drill like that was when Jonathan W used and talked about his. I thought about it when you were drilling your frame. Good on ya.
As a kid I worked with some pile bucks, after driving the piling, a 2 inch hole was bored for lashing and securing them together. I once saw the bit grab, and the gear drive drill flipped one guy overboard and broke another guys arm.
i have drilled countless frames by hand and it takes a very long time. this drill should speed things up for me.
You did not go wrong with Milwaukee Magnetic Drill. Awesome tool.
Now that was one bad ass sweet ass tool Haul JC a little bit of everything and some great video and thanks for sharing buddy.
glad you like it matt. a little of this....little of that...
Good haul. Flexzilla hoses are very nice. Yes, they will get dirty fast but who cares. The trade off is a frustration free hose. Great Knipex haul as well. Very nice.
i will get over the filthy hose once i have learned to love the convenience of rolling it up in any temperature.
Now that’s a tool haul! If I had to sum it up with a single word it would be wow!! I sure didn’t realize the pliers I sent you didn’t have the push button on them. I think you will be amazed with the mag drill!! Awesome video sir!!
thanks bobby...i am so excited to try out that mag drill. i have been looking at the annular bits to use with it...not sure what brand to get yet.
J.C. SMITH PROJECTS neiko makes pretty good bits. We use them in a regular basis.
brian stuart I wasn’t aware this gentleman had to consult his financial history with you sir! If he would likely to start a fire with 100$ bills I find that to be his business!
brian stuart it’s just the simple fact that until you work for me and pay my bills I’ll do whatever I would like to do with MY money. If you can’t go buy something that’s your problem! If I want to go buy a entire Snap-on truck and set it on fire and video to watch it burn I’ll do just that. Once again MY business!
brian stuart...it never ceases to amaze me at the number of ignorant small men there are in the world. i understand now why you are so upset and i have to apologize....i offended you when i spent all that money on these tools at one time because you realized it was more than you will make this year. keep your head up little buddy...i hear minimum wage is going up $0.10 per hour.
Sweet tool haul. I got that same 1” impact gun with the free tire buffer. I just couldn’t pass that deal up ! I also bought some of those flexzilla hoses to replace some in the shop. Great choices.
thanks clay....gearing up for a busy summer.
Great video thanks brother. Great tool haul lots of great tools. I like the magnetic drills. Great for frame rails when you want to be right there with the hole. I just couldn't get over the weight of them. I have used them for work and at the race shop old corded ones. I hope the one you have is more user friendly I would hate to see the Gradall hooked up to it to move it around. JC I'm not going anywhere I like watching the projects. I hope it gets warmer soon. Thanks again see you in the next video
thanks scott. the mag drill is much heavier than i expected....i have a truck that i want to shorten the frame and move the axle forward and i refuse to drill all the holes 5 times each again....i hope it works half as well as i have been told.
Nice haul J.C., just watched the first part of the axle swap video...I converted a 2wd Chevrolet to a 4wd back in the early 90s and it wasn't the easiest thing to do with a couple of jacks and some stands, you're making it look too easy...LoL...Have a great day...
i am sure, your axle swap was much more involved than this one. this one was just that easy.
It was rough doing it but it brought me and dad together for a while...We never quite saw eye to eye and still don't...
Great video....no shop heat....forget that mess....i,d be getting a heater
Quick funny story I was watching your first live stream that died, where you wife was cleaning the cab and you were talking about superdutys rotting at the sills. Well all of a sudden the quality gets much better and you are now on the driver side with your wife cleaning a gutted with super duty cab and then you start talking about selling her van and I realize it is a completely different video. Both videos your wife is cleaning a gutted super duty cab, your wife is certainly a keeper JC.
you wont find one better!! she loves cleaning my trucks. i am always amazed when she is all done.
Tell your wife to get detail brushes for detailing Interiors and a airline to blow the excess out it works perfect every time a toothbrush will scratch
New to your channel love it you get the tools you need then the ones you want that is the best way. The trim tool is great I have the whole set and you will like the flexzill hose.Great haul
well thanks for watching and welcome to the channel! i hope the hoses are half as good as they say they are!
This is what most of us dream of Christmas morning! Nice tool haul JC !!
it was sure was an exciting day for me! thanks for watching mike!
Dang JC!! That's an AWESOME haul my friend!!!👍🏼👍🏼
thanks randy....it was a big one for me.
Great vid J.C very nice Tool haul..
thanks darren!
I'd be very interested to compare that mag drill to a Hougen corded drill. I'm skeptical on how much holding power the magnet will have on battery power. It would suck to have it pop loose mid-cut working in a frame wedged in under a body behind a tire.....
i would have liked to have bought a hougen but it was just too costly for my budget and the amount i would end up using it. i was skeptical about the magnet also. we will see how it does on the next frame shortening project i do.
JC, check out the large Knipex pliers with smooth jaws, they work great on fuel, hydraulic and air line fittings
Best out of your haul Milwaukee the best right now in my opinion the impact are awesome also the inch impact is a best that drill is awesome
Folks who have those Snap On non marring panel sets seem to love them. I’ve got a cheapy set from Harbor Freight.
That panel popper you got is my favorite. Own 3 or 4 different. It’s the best.
Have that hose pick set too but looking at the flat bladed set Koon Trucking got.
That M18 Fuel magnetic drill looks badass. Didn’t even know they made it.
i hope they work out well. since i bought the mag drill, one of my projects just got moved up the list in front of others!
747👍's up JC thanks for sharin
great insights on your selection of tools
That’s a great tool haul for sure I bet that mag drill will be awesome
i think that mag drill will make several jobs much easier this summer.
Came across this today. IF you're considering getting back on UA-cam - A new Tool Box Tour with all of your new tools would be great. Tks
Nice, especially the 3/8 ratchet but I would prefer the old school handle on the ratchet
Awesome tool haul makes me want to try I have the big set of pliers they work great
thanks chris...it sure is nice to have nice tools. i can remember buying whatever el cheapo tools i could afford.
1,475 foot pounds!! that is a lot!! :) Glad you got some great tools to make your job go easier! I know they will save you some time!
awsome tool haul JC, love that Milwaukee drill!! Have a great day
i am anxious to use that drill!
Now that is a tool haul! Thanks for sharing it with us!
thanks for watching justin!
Damn that is huge tool haul. Last time I saw that big of a stack was at automotive school, and everyone was using the student discount on tools.
Think you will really like the hoses and they do get dirty fast but clean up good
i hope i like them....in theory they are just what i need.
Great video JC, awesome tool haul, amazing drill.
i cant wait to put that drill through the paces.
That's quite the haul for sure, I can't wait for you to use that Milwaukee Magnetic Cordless Drill, that should be something to see if it can hog thru doing holes and with as many uses as they say it can. Milwaukee makes some nice stuff, it will be interesting to see how she goes. Did you use your Milwaukee impacts yet?
i have a couple of frame drill projects coming up and will be putting it to the test...i am not easily won over on tools so i will be giving a very honest review of the tool....i have used my new milwaukee impact some. i have been wanting to get some covers for them before i beat them up.
Wow what a tool haul . Impressive great video
Awe yeah, Milwaukee mag drill! Time to start thinking about busting into safes as a hobby.
my luck the safes would be empty!
YES, SIR That is one nice TOOL HAUL. AWESOME VIDEO Mr JC
thanks big daddy....as soon as the weather gets better we will be putting them to use.
Nice haul! Cant wait to see that drill in action!
me too! since i bought the drill it has made me move one of my future build that require a lot of frame drilling much closer to the front of the line.
You'll love annular bits and a mag drill
Now that’s a beautiful thing great haul I have that same ratchet in 1/2 dr n I love it , great video
thank you and thanks for watching!
It nice to have extra tools.
You're missing the smallest pair of the knipex cobras. They're pocket size. Good pair to just keep in your pocket at all times.
just ordered them today.
that mag drill would be handy, i know what you mean about drilling through the frames, had to drill alot of holes for toolboxes on the hooktrucks, and it sucked alot being double wall frames
i should have bought this this drill after the first couple frames......i was just being cheap!
I see at least 3 packages of Snap-on tools. That’s gotta be at least $3500 right there.
Probably closer to $7500
Sweet tool haul good video thanks for sharing this
thanks russ.
WAIT A MINUTE!!........(I'm still waitin' for the part where "We'll get back to those".....ie shirts n' hats) JC you got somethin' up your sleave! :)
that is for another video!!!
Sweet mag drill. Look into some annular cutters now and you'll never look back to hole saws again
i have been looking for annular bits....i just havnt decided what brand to buy.
standard drill bits are not made for pilot holes you just eat the shoulders off em
I use giant water pump plyers for filters at work every week
that is exactly why i wanted those 16" and 22" knipex!!
They make for cobras then that. Maybe get the 5” one. Love knipex.
Nice tool haul damn I'm jealous! I'm a heavy equipment mechanic in south jersey and I prefer comfort grip myself
i only use the confort grip on my 1/4" drive ratchet. the rest just sit in the box.
Great video and awesome tool haul
thanks blaze!
The COLOR of a handle is so important that you would pay Snap On prices just for a color change? Hey, to each
his own I suppose!
Awesome video brother keep up the good work and as always keep the videos coming 👍🏼👍🏼👍🏼✌️
thanks frankie!
I'd like a video on that new Milwaukee tool that you got drilling holes plz
i used it on the 2003 f450 v10 project that i did. the video is in a play list.
Awesome haul.
thank you!
I want one of those drills! do a video on it. great video as always!
i have wanted one for a couple years.....just too cheap to spend the money for it.
I know they are not cheap. I really don't know how much I would use it, but I would find uses for it.
ive always wondered...won't the drill drop if the battery dies?
i guess we will find out!!!
listen cooter...i thought the same thing you did so i asked the rep...i wasnt 100% confident in the way he answered the question so i did the same thing.
on a corded mag drill an electromagnet is used. the one i have has the magnet on a switch. you can sit it on something and the magnet does nothing until you hit the switch.
on the other hand I have no clue about the milwaukee
Hey right on..!! Never knew you had a channel thumbed up and subbed!
thanks....just ,messing around with trucks and tools.
Good lord, did you leave anything on the truck? I imagine his fuel mileage improved after leaving your place
how funny...you comment on my video as i am watching yours!!
I was just going to say something similar LOL
Thanks for the vlog c.j
thanks for watching kyle!
What did the torx screwdriver set cost?
i dont remember. they are $213.95 on the snap on web site.
great haul
thanks john!
You had to buy the hat? On the snap on truck I hop on, you spend enough money they throw a hat at you.
Man that ,that's a tool haul
yes it is doug....it is a big one for me.
nice tool haul
thank you sandra!
Nice haul man, new sub.
well thanks for subscribing and welcome!
Nice haul
thanks john!
great vid man
thanks layken.
Np keep it up
Subd great tool haul thanks for sharing
Screw all these tools get your shop heated I can’t even imagine how miserable it is in winter
i dont need heat to fix trucks. i have worked outside most of my life. im no snowflake!
You sound like “Eric the car guy’
That I.R. 1 inch gun is about 1600 ft lbs or so not 400
it is about 1400 if i recall
Uh that light is orange lol
Holy shit
I did a video on sk made in USA TRIM TOOL, Check it out
i think you have a orange flashlight not a red
Spend that kind of money on tools and have no shop heat...
That magnetic drill is 65 pounds....Them things are way over 2 grand.....Could have had a good furnace.
Im no sissy. i work in the weather all year around. heat doesnt get the trucks fixed....having thr right tools is what is important to me. if you need heat to fix your stuff, then by all means....spend your money on heat. besides, what good would a furnace do in that building with absolutely no insulation....
I see 10,000
I feel like the second take lost some of the whimsy of the first take...
your probably right...the second and third takes are never as good as the first!
It’s not knipex it’s knipex
Too big to be called a haul, thats a tool convoy.
now that is funny!!!
60k later... Haha
thats funny....like i have that kind of money!! hahaha!!
400ft lbs from a 1in gun?
Try again.
i believe i said 1400
Snap on sucks.
thanks for your great comment! i am sure this insight will help all that watch this video!