Holy crap I was literally about to install that high powered spring into mine with the included spacers and one of Xfoxgames spacers, so you definitely saved me the hassle of ruining my spring! Thanks for that tip so much!
I honestly was hesitant on changing my 280mm barrel to a 400mm barrel. But I kept getting inconsistent numbers with a 20mm spacer on the stock spring and 280mm barrel. As soon as I dropped a 400mm barrel in, it was much more consistent. Hitting around 220-230fps with AF Ember darts. Still a very easy prime for a 25-30fps increase. I was averaging around 190-195 completely stock.
Unfortunately I just ruined my stock spring with a combined 3.5 inches spacers before watching your video. It gave me a hard time openiing up the blaster because the coiled spring inside jammed the buffer tube hard and won't let me pry the clips. Have to pull the U shape spring from the limited slit before I can release the clips. Lucky my spring is not as crook as yours and I can still streched it up a bit to keep using it. With 2 inches spacers and stock spring it can break 250 fps with 1g darts. I won't go any further than that after the incident. Now I just keep an 1 inch spacer inside to get 210 fps all day. It is easily my best love 200 fps blaster out of a dozen because of its slick and easy prime and trigger pull. It is dead accurate even without a barrel mod. I have add a red dot sight but the included plastic scope is actually usable and accurate. I can hit a 3 inch target from 30 feet away easy. Can't say the same with Max Stryker 2.0 in stock form. I told myself not to buy any toy grade pro blaster after Stryker 2.0 but now the NPX changed my mine. If I am in USA than buying them all is no brainer but too bad I am in a land where only 8+ toy is allowed so getting these 14+ thingy I will need to pay at least double even triple so it is always a pain if something does not work out or break. That's why I have to buy wisely and NPX is my pick.
I'm getting 260 to 270 with the HP spring and one spacer on Worker orange tip bamboos. Prime is STIFF lol...it's fun but I wouldn't run that in a game because of the effort to prime takes too much time.
Honey Gordon what it was was that I tried two spacers plus a 2-in spacer and it was able to be shot I tried it with four spacers in it total and I was getting about 260 to 270
Problem is with bamboo darts and dragon darts their lighter you lose accuracy Such as when I play I use worker 1.2 g bamboo heavies The only time that I use Dart zone bamboo darts is just for testing just if I want to see really insane numbers Play in my humble opinion the only did they cost more than worker darts and they're just not worth it because they're lighter and they're inaccurate I only want them in testing
Nice video thanks man. Btw you’ve mentioned your harrier, how much are you hitting? I am getting a 260-290 ish, with the 1.6mmx 300L spring, 450mm barrel, Sabre internals and worker gen 3 1gram darts. Any advice to push it higher?
@@hal0odst754 there are ways to do it like if you put a spacer in the bottom of the buffer tube that might give you a little bit better results but remember everything goes off the volume of the tube and just the two volume of that thing it's not the size of a saber or something like that you know it's a mid-range tube and I've seen some people get shots that were like 323.30 on camera but they don't say what type of ammo they're using or anything My hair is the metal upgrade parts and all that I'm doing about 300 to 3:10 on an average what I've also got much improved seals better rings
@hal0odst754 to be honest with you everybody asked me what kind of o-rings I use and I get my o-rings in bulk just different sizes I literally have a bucket of o-rings I never know what size I use I swear it I never know I just find one that fits and seems really tight and now I go I literally have a bucket of just random o-rings that I use
@hal0odst754 to me that's what modification is a lot of it is just experimenting with different sizes and different things to see what works and what doesn't work Like I did a modification to the BK2 I got a little bit better fps performance out it just by swapping it out with a bk1s barrel that'll be coming up in a video here in a couple days that was just experimentation because I didn't know if it was going to work or not
@@milosmods Because you can, on a DZ blaster. That's the point. When was the last time you could do that on a DZ blaster? Show what else you can do to improve the overall feel of the blaster maybe? It's like preferring to sit in a plastic lawn chair versus sitting in a Lazy Boy. Money shouldn't be a factor in this when it comes to modding; performance related or not. Do we ONLY focus on performance when modding cars? Comfort is a big deal, especially when it's the part you're touching the most. Mine's a rubberized Magpul and it's 🔥🔥🔥 compared to the cheap, uncomfortable stock grip.
@@adamb416 yes that is the first easy Blaster that can do that absolutely I won't take that away from you but however you can do it with the game face trion You can do it with a sabre as well but to me the grip is comfortable and if I want to rubberize it all I would have to do is just get a bicycle and or two and slide it over 😁 And to be honest with you as nice as Daisy blasters are they're not their best in the world trust me And I'm sure your group was very inexpensive but I just didn't see the point You got to remember when you do modification you can take it as high as you want to go or as low as you want to go you could do whatever you want to it and I chose not to do that modification just simply because I did not see the point in it If I'm going to spend money on a modification it's going to be for performance first and foremost if a statics work into it afterwards great put aesthetics are not my number one goal
@@milosmods 1. Why are we talking about money? 2. So this is a performance focused modification channel ONLY 3. How does this get people excited about getting into the hobby if you're ONLY looking at the Nexus Pro X's (arguably the best entry level blaster ever) performance potential when there is so much more that the DZ team did to make the blaster special? Talk about missing opportunities because "you don't see the point"...is this channel for you or for other people to learn from? The gun was $50. Even more reason to spend more money on it to gear out. Because it DIDN'T cost a lot... minus 10 more points.
Well the appeal is when the price point yes the XLS is cheaper but the XLS the plastic is also really thin I've already cracked two XLS blasters shells that is The Nexus has a better quality plastic and the excellence doesn't have all metal internals it only has three internal metal parts and that's counting the tube but to each his own maybe the Blaster is not for you
@@milosmods under what load did you crack the XSLS? By that I mean how high was the fps? Mine hits 250 with a 14kg spring and a pvc spacer. Think the shell will eventually crack under that load?
@milosmods the catch, plunger arm, and tube are metal on the XSLS. How many of those can be upgraded to metal on the nexus pro x? Certainly not the plunger tube. If that ever breaks, you'll need a whole new blaster. If my shell ever cracks, it won't make the blaster unusable, at least at first.
@@DEVILISHLY_DELICIOUS I used 8 in of k25 and after about 800 shots to Shell actually started to crack I noticed it when I was priming it and I could see the shell warping so yeah
Holy crap I was literally about to install that high powered spring into mine with the included spacers and one of Xfoxgames spacers, so you definitely saved me the hassle of ruining my spring! Thanks for that tip so much!
You're welcome
Thanks for the tips. I always use nexus pro x with only one small spacer to protect more the durability of the spring.
I honestly was hesitant on changing my 280mm barrel to a 400mm barrel. But I kept getting inconsistent numbers with a 20mm spacer on the stock spring and 280mm barrel.
As soon as I dropped a 400mm barrel in, it was much more consistent. Hitting around 220-230fps with AF Ember darts. Still a very easy prime for a 25-30fps increase. I was averaging around 190-195 completely stock.
Unfortunately I just ruined my stock spring with a combined 3.5 inches spacers before watching your video. It gave me a hard time openiing up the blaster because the coiled spring inside jammed the buffer tube hard and won't let me pry the clips. Have to pull the U shape spring from the limited slit before I can release the clips. Lucky my spring is not as crook as yours and I can still streched it up a bit to keep using it. With 2 inches spacers and stock spring it can break 250 fps with 1g darts. I won't go any further than that after the incident. Now I just keep an 1 inch spacer inside to get 210 fps all day. It is easily my best love 200 fps blaster out of a dozen because of its slick and easy prime and trigger pull. It is dead accurate even without a barrel mod. I have add a red dot sight but the included plastic scope is actually usable and accurate. I can hit a 3 inch target from 30 feet away easy. Can't say the same with Max Stryker 2.0 in stock form. I told myself not to buy any toy grade pro blaster after Stryker 2.0 but now the NPX changed my mine. If I am in USA than buying them all is no brainer but too bad I am in a land where only 8+ toy is allowed so getting these 14+ thingy I will need to pay at least double even triple so it is always a pain if something does not work out or break. That's why I have to buy wisely and NPX is my pick.
@@turboz551 yeah same thing happened to me the spring coiled up in bent and everything else it's no good
Looking great! thanks for the info
You're welcome
Can you link the light darts so I can get them?
That also tells us the springs aren't made from spring steel.
Yeah exactly and I haven't had springs do that in a while
I'm getting 260 to 270 with the HP spring and one spacer on Worker orange tip bamboos. Prime is STIFF lol...it's fun but I wouldn't run that in a game because of the effort to prime takes too much time.
Exactly
So what is the power reading with 3 spacers before it became like this?
Honey Gordon what it was was that I tried two spacers plus a 2-in spacer and it was able to be shot I tried it with four spacers in it total and I was getting about 260 to 270
How accurate is dragon darts? The bamboo darts are on sale on their website if you want to get some.
Problem is with bamboo darts and dragon darts their lighter you lose accuracy
Such as when I play I use worker 1.2 g bamboo heavies
The only time that I use Dart zone bamboo darts is just for testing just if I want to see really insane numbers
Play in my humble opinion the only did they cost more than worker darts and they're just not worth it because they're lighter and they're inaccurate I only want them in testing
Nice video thanks man. Btw you’ve mentioned your harrier, how much are you hitting? I am getting a 260-290 ish, with the 1.6mmx 300L spring, 450mm barrel, Sabre internals and worker gen 3 1gram darts. Any advice to push it higher?
@@hal0odst754 there are ways to do it like if you put a spacer in the bottom of the buffer tube that might give you a little bit better results but remember everything goes off the volume of the tube and just the two volume of that thing it's not the size of a saber or something like that you know it's a mid-range tube and I've seen some people get shots that were like 323.30 on camera but they don't say what type of ammo they're using or anything
My hair is the metal upgrade parts and all that I'm doing about 300 to 3:10 on an average what I've also got much improved seals better rings
@@milosmods hi thanks. May I know what o rings are you using?
@hal0odst754 to be honest with you everybody asked me what kind of o-rings I use and I get my o-rings in bulk just different sizes I literally have a bucket of o-rings I never know what size I use I swear it I never know I just find one that fits and seems really tight and now I go I literally have a bucket of just random o-rings that I use
@@milosmods i see. Nice. I will mix and match to try then.
@hal0odst754 to me that's what modification is a lot of it is just experimenting with different sizes and different things to see what works and what doesn't work
Like I did a modification to the BK2 I got a little bit better fps performance out it just by swapping it out with a bk1s barrel that'll be coming up in a video here in a couple days that was just experimentation because I didn't know if it was going to work or not
What type of lube you use for barrel?
@@naniwatiger2450 I don't lube my barrel
@@milosmods okay then what do you tend to lube?
No AR-15 rear grip. Minus 10 points. 😂
I didn't see the point of putting a $20 grip on a $50 blaster it doesn't really help performance LOL
@@milosmods Because you can, on a DZ blaster. That's the point. When was the last time you could do that on a DZ blaster? Show what else you can do to improve the overall feel of the blaster maybe? It's like preferring to sit in a plastic lawn chair versus sitting in a Lazy Boy. Money shouldn't be a factor in this when it comes to modding; performance related or not. Do we ONLY focus on performance when modding cars? Comfort is a big deal, especially when it's the part you're touching the most.
Mine's a rubberized Magpul and it's 🔥🔥🔥 compared to the cheap, uncomfortable stock grip.
@@adamb416 yes that is the first easy Blaster that can do that absolutely I won't take that away from you but however you can do it with the game face trion
You can do it with a sabre as well but to me the grip is comfortable and if I want to rubberize it all I would have to do is just get a bicycle and or two and slide it over 😁
And to be honest with you as nice as Daisy blasters are they're not their best in the world trust me
And I'm sure your group was very inexpensive but I just didn't see the point
You got to remember when you do modification you can take it as high as you want to go or as low as you want to go you could do whatever you want to it and I chose not to do that modification just simply because I did not see the point in it
If I'm going to spend money on a modification it's going to be for performance first and foremost if a statics work into it afterwards great put aesthetics are not my number one goal
@@milosmods 1. Why are we talking about money? 2. So this is a performance focused modification channel ONLY 3. How does this get people excited about getting into the hobby if you're ONLY looking at the Nexus Pro X's (arguably the best entry level blaster ever) performance potential when there is so much more that the DZ team did to make the blaster special? Talk about missing opportunities because "you don't see the point"...is this channel for you or for other people to learn from? The gun was $50. Even more reason to spend more money on it to gear out. Because it DIDN'T cost a lot... minus 10 more points.
A modded nexus pro x still has plastic internals. A modded Xshot longshot doesn't. I don't see the appeal of the pro x.
Well the appeal is when the price point yes the XLS is cheaper but the XLS the plastic is also really thin I've already cracked two XLS blasters shells that is
The Nexus has a better quality plastic and the excellence doesn't have all metal internals it only has three internal metal parts and that's counting the tube but to each his own maybe the Blaster is not for you
@@milosmods under what load did you crack the XSLS? By that I mean how high was the fps? Mine hits 250 with a 14kg spring and a pvc spacer. Think the shell will eventually crack under that load?
@milosmods the catch, plunger arm, and tube are metal on the XSLS. How many of those can be upgraded to metal on the nexus pro x? Certainly not the plunger tube. If that ever breaks, you'll need a whole new blaster. If my shell ever cracks, it won't make the blaster unusable, at least at first.
@@DEVILISHLY_DELICIOUS I used 8 in of k25 and after about 800 shots to Shell actually started to crack I noticed it when I was priming it and I could see the shell warping so yeah
@@milosmods no idea on the fps with that k25 spring?