Відео

@@station7thedoor no no it won't it won't explode

@@milosmods "You can't win, Nerf. If I remove this flag, my blaster will become more powerful than you can possibly imagine." -Sir Alec Guinness.

@@station7thedoor I appreciate the Star wars reference but when you remove that flag it just allows you to be able to use shorts as well so it can take longs and shorts

@@milosmods See, *I* heard that if you remove that flag, it will start a chain reaction which will destroy the station. “The whole thing goes down,” That’s how she said it. “The whole thing goes DOWN.”

So… is that what happened to the death star? A storm trooper was modding and that is what caused the chain reaction?

@@peterlee6304 yeah my son has a hard time with the npx just because of where that barrel is located now it's a little bit lower but me I really don't have a problem with it

@@botsnblasters no worries

@@DartsNStuff exactly

@@sataki82 you're very welcome

@@nerftalk1163 you're very welcome

@@Miciah-j1v well if you live in the United States out of darts will be putting pre-orders up the middle of September

It definitely is a fun little blaster and I'm glad you're using 40 Mac shelves too I use them on my HPA grenade launchers I have

@@sataki82 yeah it certainly does it's awful nice for what it cost me I was like pretty pleased with it it definitely put a smile on my face

@@Miciah-j1v I have a question for you what kind of grip were you using were you using one for an AEG or one for like an AR-15 like I used

@@milosmods I bought one to fit and aeg but sabre sent me two of the same side spacers so I can't install the grip now.. I'm gonna go out and buy an ar 15 grip... question what version should I buy?? And do you think that's why I'm having the issue with the trigger..

@@Miciah-j1v quite possibly because me I used an AR grip on my as I said I bought one that was just like it's called a no-tail grip if you look at like the description for this video you'll see my email address send me an email and I'll try to find you an AR-15 grip that will fit for it I'll give you the buy link for it okay

@@milosmods hey I definitely appreciate it!! But I'm going to a local gun shop today that carries some!! And definitely enjoy your videos!! You should make a video with the 30kg spring.. but if I go and they can't find one to fit. I'll email you ect!!

​@milosmods I found a grip and I found our what the problem was.. the plunder tube needed to be twisted more towards the catch.. the catch was getting stuck on the plunger tube. It was a pain cause one side was not easy to slide in and out..

@@jeffcocchi5789 yep I was being lazy and did it the quick way 😂😂😂😂

@@Jimmy2Bits I tried it both ways on mine and I still had issues to where I had to yank out the magazine like that

@@nerftalk1163 yeah I think so

Also that 300 fps mod guy was me I’m not on crack just foam

@@americancow598 now I got it now I get it as far as the spring I would like to see a better spring come out of them the only problem that I fear is that the plunger tube may be maxed out

@@damion9742 absolutely

@@DartsNStuff and that's the sad part about it to the torrent has the ability to be an amazing Blaster if people put their mind to it you know and figure it out but it has a whole lot of issues

@@milosmods yeah I know we shouldn’t have to but I would like to mod mine out fix all the issues and make it reliable. I really want the torrent to succeed just off to a rough start.

@@DartsNStuff no trust me I understand believe me as far as I've gotten on thinking about mine is extending the barrel actually putting a metal barrel and I've been thinking about a way to make it side prime like the Helios but that Blaster truly does need a lot of love

@@meliodashadeyoshi2115 best way I can describe it is a 14 kg spring I can use it like a regular pump action would the 18 kg spraying I have to use side prime but I only need one priming bar for that When I switched up to the 30kg spring I use a double priming bar most of the times I run mine like in a game with just an 18 kg spring which is still 330 FPS or more

@@NerfByGabe I picked this one up in store

@milosmods don't have that option I live overseas 😪

@@NerfByGabe oh no I understand trust me you're in the same boat as like the Australians

@@meliodashadeyoshi2115 I tested the darts with a 400 FPS Springer at 10 ft against the concrete wall and I fired multiple shots out of the same Dart and I didn't get any decap and I figured that's the best way to test them it's just a shoot the bloody things

@@mattorama if they don't have carpal tunnel syndrome by then they certainly will

That's not how cts starts but still an lol comment.

@@backyardfoam it is a nice Blaster I going mod it in a day or two just a quick mods

@@sataki82 in a few days I've got a short coming up on just a quick mod video on how to get it to take short darts because when you get it normally it'll just take the long darts but there's a way to get it to take shorts with just a snip

@@DartsNStuff the ones that I'm showing on camera are the normal 1 g variety they also have a 1.3 Grand variety that will be available very soon I'm talking to sabre now to try to get some for testing

@@milosmods where do you rate these darts against off the shelf stuff like Dart Zone,Adventure Force?

@DartsNStuff I would write these darts right on par with anything we have in the community if not slightly better I mean they're definitely better than AF pro or the Ruby darts

@@milosmods ok yeah I was looking at them the other day was just curious how good they were.

@DartsNStuff the phone is definitely a higher quality than the stuff from Dart zone that's for sure I mean they're very good darts to give you an idea about durability I was using a 400 FPS Blaster and I was shooting a concrete wall at 10 ft and I didn't get any decafs or anything like that I was rather impressed with that alone they work in 99% of the blasters in the community so that's always a bonus they're just an all-around good quality Dart

@ScottBionicBlasters no the spring on the striker 2.0 is wider and it's nowhere near the same length as the Nexus X if I had to guess on the width of the spring the spring from the Nexus X is about the size of like a Harrier spring on the inner diameter The spring on the Stryker 2.0 is about as wide as a Retaliator spring maybe a little bit wider actually They're nowhere near the same length and they certainly are not interchangeable Yeah it's they're not even anywhere close to being interchangeable sorry I wish they were and neither is the spring post either I've tried that as well

@@sataki82 pretty nice and you're absolutely right you know I mean they serve a purpose they're really cool so yeah

@@meliodashadeyoshi2115 well I use 15 round straight talon magazines because that's what I have the most of

@@DartsNStuff no problem Joe sells a lot of really nice stuff I bought a lot of cool things for him and he's so underrated it's sad

@@hal0odst754 yeah it is kind of sad that you know the clone has better performance than the original aside from the durability issue you know that's another thing too as far as the toy laws in China they do that on purpose they put weaker springs in just so they can export them out of the country it's up to you to drop a bigger spring and what's that Blaster will take heck you can get all metal parts for the inside of it if you want just go to like m416 or something like that they have all kinds of metal parts for this blaster My personal thing on clones and all that is a lot of The originals or 3D printed on and I have an aversion to 3D printing just because I've had to repair a lot of 3D printed blasters because of the printing being crap and I also have an OG gecko too and to be honest with you I prefer the clone I have not bought one of those injection molded Lynx is yet

@@milosmods same here i have given fixing constantly for 3d printed blasters as its eating up quite alot of my free time. My blasters are now harriers, seagull and blaize. I have the g lynx but i quite like play with chynx. I have detested the 3d prints so much that i haven’t tried the lynx. The chynx work fine (the prime maybe abit too deep for adult hands meaning that the distance is long and very close to the body at the end of the prime) and the g lynx is fun for fps chasing. The only 3d print i like is the spamf and that is not full 3d print. Maybe the sbl2.0 may be different with some metal internals? 🤷🏻‍♂️ but who has the time after work to troubleshoot constantly something you paid for. 3d printers also has the part of the mark up of the price. Making the hobby honestly hard for ppl. To be honest, i think if not for the existing companies like worker, dartzone, zwq i think alot the cool blasters and powerful blasters will only be for the rich and the tight group of printers and not the new comers. New comers maybe have to buy only nerf… and they still want to be inclusive? 🤔 What are your thoughts? (Sry perhaps i may be ranting abit)

@@fastfurious7999 yeah he certainly is underrated for sure

@@xfoxgames no problem I actually like them I would like to review the one for the torrent as well maybe I'll pick that one up in a couple weeks I don't know my funds are just a little short at the moment

@@nerftalk1163 kind of reminds me of a zombie strike green fun fact my son's favorite color actually is green so he likes him he really likes the venom

Just a cheap toy scope that came in a Chinese blaster I got a whole ago

@@milosmods haha I thought it was an expensive prism scope at first glance

@@potatokilr7789 know to be honest with you when I play I don't even use sites I just use iron sights you know I mean like seagull sites the only time that I put like a toy scope or something like that on it's just for cosmetics for UA-cam other than that I don't even really bother I mean my whole philosophy is it's a blast or it doesn't really deserve a sight it's not you know a real steel firearms

@@khrisosgood23 usually I have an aversion a 3D printing but these were printed really nice I mean I was rather impressed

@@ScottBionicBlasters I dropped that Blaster from 10 ft and it didn't break that's because the shell isn't like the clear plastic used to be its polycarb the same stuff that plunger tubes are made out of for like caliburn's lol

Lol