In this video I show how to properly jack up and support a 2012 Mazda 3 and how to change the oil on the same vehicle. The car has a 2012 Mazda 3 with a 2.0 Skyactiv engine.
I have not read all of the comments on this video, but I am sure it has been said and even if it has been you should hear it again. This is actually one of the best tutorial videos I have watched on UA-cam. You are clear, concise, and have included (what I believe is) all of the most valuable information to get this job done correctly. Generally I have a very hard time finding videos that do that with anything, so THANK YOU!!!
i just bouht a 2012 Mazda 3 and traded in my SUV because of gas prices , the mazda had 30k miles so it was a steal IMO . the dealer sold it as is for 12k . any how the first thing i did was change the oil and oil filter and this Video guided me STEP by Step !!!! even with the tools and all that thanks man !!!!!!!!!! i literally just finished doing it it took me 25 minutes or so . but never done this before so this video made me feel at ease .
As others have said, great video Enrique. Clear with great commentary. I went to do my daughters and it seemed like I had to remove the oil filter first which is new for me so I just wanted to verify how others did it as access to drain plug, although convenient, is tight with the filter in place.
Agreed! I apologize that your vehicle required a different tool than what I specified. Thank you for bringing this up. Thank you for your comment and thanks for watching!!!!
thank you very much! i'm about to change the oil for the first time in my 'new' car, and i'll reference this heavily. pretty new to working on cars but i'm excited to learn. not sure if i have an 8mm allen socket, but i do have plenty of regular allens (which i'm assuming will work). hopefully going to put on a fumoto valve on that bad boy!
Hello Enrique! Good Night, I'm from Brazil, and I'm studying Electronic Injection, when you can put some videos Testing with scope Hantek in (sensors and actuators) ... Thank you very much.
First thing I would check is to see if the brake pad lining is worn out. You way be able to do this with a small telescoping mirror and a flashlight, but ideally you should remove the wheel and inspect each brake pad individually. If the lining is good, make sure your rotor does not have any uneven ridges or valleys which could be a sign of uneven rotor or pad wear. Another thing to check is to make sure all the sliding surfaces of your brake system are clean and properly lubricated. Lastly, if the material of your brake pad is of low quality, excessive noise and dust can be a consequence. Thanks for your question and thanks for watching!!
I am not sure I understand the question. Are you asking if there is another engine that has the same coolant as the Mazda so you can remove the coolant from the other car and put it in the Mazda?
Sorry I mistyped. I was asking if you could recommend an engine coolant that is equivalent to FL22. Mazda recommend FL22 coolant, however I can't find it anywhere. I would like to flush and refill the coolant in my 2012 Mazda 3.
I use Peak - Asian Vehicles - Green and have not had a problem. peakauto.com/wp-content/uploads/2017/09/PEAK-OET-Asian-Spec-Sheet_Green-080917.pdf peakauto.com/products/antifreeze-coolants/automotive/oet-asian-vehicles-extended-life-green/ The links above are to a PDF describing the coolant and the second link is to the product website. This is a silicate free coolant which is imperative to prevent gelling of the antifreeze.
@@Ibamba7 old comment, but in case people look, FL22 is mazdas long life coolant. Its good for 10 years or 100 000kms. You may use another provided it meets the specs. Flush the system with demin water before draining and adding new coolant
Hi, great vid, allthough i think you are going the wrong way, you being a tech guy, theese do it your self vids are all over the place, but yours is well explained. 😉
Como cambias el aceite de caja? Y a los cuantos kilometros se debe cambiar. Triptronic (how do you replace the triptronic oil, and at what time or miles have to change it?) Mazda 3 2012 skyactive .... please...
Disculpe pero yo no escribo el espanol muy bien. Si no estoy claro con mi respuesta dejame saber y voy a tratar de clarificar. Busque informacion sobre su carro y lo que encontre es que es muy facil cambiar el aceite de la transmission. 1. Quite el tornillo que detiene el indiocador de nivel de aceite (dipstick). 2. Sube el carro en la misma manera que lo hicieras si estabs cambiando el aceite de motor. 3. Quita el tornillo (drain plug) de el aceite de transmission. 4. Es importante cambiar el tornillo y el emaque de el tornillo con una nueva 5. El torque para apretar el tornillo es 30-41 Nm (3.1-4.1 kgf-m, 23-30 ft-lbf) 6. Pon el carro nivel a el suelo. 7. Llena la transmission por medio del oyo de el indicador de el nivel. 8. Necesita entre 3.5 a 4.9 litros de aceite de transmission de Mazda. Es Mazda FZ. La informacion que yo encontre indica que nunca se tiene que cambiar el liquido. Es por vida.
Although it is possible to change your oil while it is cold, changing it while it is hot is preferred since it's viscosity is lower which means you will be able to drain more of the oil out.
I have not read all of the comments on this video, but I am sure it has been said and even if it has been you should hear it again. This is actually one of the best tutorial videos I have watched on UA-cam. You are clear, concise, and have included (what I believe is) all of the most valuable information to get this job done correctly. Generally I have a very hard time finding videos that do that with anything, so THANK YOU!!!
i just bouht a 2012 Mazda 3 and traded in my SUV because of gas prices , the mazda had 30k miles so it was a steal IMO . the dealer sold it as is for 12k . any how the first thing i did was change the oil and oil filter and this Video guided me STEP by Step !!!! even with the tools and all that thanks man !!!!!!!!!! i literally just finished doing it it took me 25 minutes or so . but never done this before so this video made me feel at ease .
So glad it helped! That was the goal! Thank you for your kind words and thanks for watching!!!
Im probably the least hands on / automotive knowledgeable person out there and this video made me feel like Einstein. Thank you!
Thankfully mazda cares about their customers and doesn't make it a nightmare to change something as simple as oil like certain other companies..
Thanks for the tutorial, very clear and the vid quality helps a lot to see where things are and not mess it up.
Thank you. I am glad I could help.
As others have said, great video Enrique. Clear with great commentary. I went to do my daughters and it seemed like I had to remove the oil filter first which is new for me so I just wanted to verify how others did it as access to drain plug, although convenient, is tight with the filter in place.
great vid, one thing to help it drain is take off the oil cap. i like the new filter filling before installing
100% correct!! I absolutely endorse this tip, thanks for sharing!
Thank you for noting the tools necessary. Great video!!
Great video, and it’s exact my year and model.
Thanks for the tutorial, been awhile since I did an oil change myself.
I am glad I could help. Thanks for watching!!
You remove the filter first???????
Hello Enrique great job! Please upload the "Fuel Injection Pulse Width Calculation" i would really apreciate it! Thx in advance! Keep making videos!
Does the car come stock with the oil drain plug that’s for Allen only?
It does!
How do you determine the amount you pour in to be 4.5qt, considering most cans are labelled 5qt? Estimate?
Very good and clear instructions 👌
My drain plug needed a 17mm socket so make sure to check when getting your tools
Agreed! I apologize that your vehicle required a different tool than what I specified. Thank you for bringing this up. Thank you for your comment and thanks for watching!!!!
Does this filter fit a 2011 mazda 3?
thank you very much! i'm about to change the oil for the first time in my 'new' car, and i'll reference this heavily. pretty new to working on cars but i'm excited to learn. not sure if i have an 8mm allen socket, but i do have plenty of regular allens (which i'm assuming will work). hopefully going to put on a fumoto valve on that bad boy!
Thank you for this!
Great video! Nice & Precise!
Thank you for the kind words, and thanks for watching!!!
Great informative video!
Glad it was helpful! Thank you for watching!!
Great video
Glad you enjoyed it
Hello Enrique! Good Night, I'm from Brazil, and I'm studying Electronic Injection, when you can put some videos Testing with scope Hantek in (sensors and actuators) ... Thank you very much.
Really nice job!
Thank you for the kind words and thanks for watching!!
Why do i have a noise in my brakes. Applies them and it stops??
First thing I would check is to see if the brake pad lining is worn out. You way be able to do this with a small telescoping mirror and a flashlight, but ideally you should remove the wheel and inspect each brake pad individually. If the lining is good, make sure your rotor does not have any uneven ridges or valleys which could be a sign of uneven rotor or pad wear. Another thing to check is to make sure all the sliding surfaces of your brake system are clean and properly lubricated. Lastly, if the material of your brake pad is of low quality, excessive noise and dust can be a consequence. Thanks for your question and thanks for watching!!
Can you please recommend an engine equivalent to FL22 that can be used to flush and refill the coolant in Mazda 3 2012 Skyactive?
I am not sure I understand the question. Are you asking if there is another engine that has the same coolant as the Mazda so you can remove the coolant from the other car and put it in the Mazda?
Sorry I mistyped. I was asking if you could recommend an engine coolant that is equivalent to FL22. Mazda recommend FL22 coolant, however I can't find it anywhere.
I would like to flush and refill the coolant in my 2012 Mazda 3.
I use Peak - Asian Vehicles - Green and have not had a problem.
peakauto.com/wp-content/uploads/2017/09/PEAK-OET-Asian-Spec-Sheet_Green-080917.pdf
peakauto.com/products/antifreeze-coolants/automotive/oet-asian-vehicles-extended-life-green/
The links above are to a PDF describing the coolant and the second link is to the product website. This is a silicate free coolant which is imperative to prevent gelling of the antifreeze.
@@Enrique_Osorio Thank
@@Ibamba7 old comment, but in case people look, FL22 is mazdas long life coolant. Its good for 10 years or 100 000kms.
You may use another provided it meets the specs.
Flush the system with demin water before draining and adding new coolant
Super helpful! Thank you so much.
Thank you for your kind words and thanks for watching!!!😁
Hi, great vid, allthough i think you are going the wrong way, you being a tech guy, theese do it your self vids are all over the place, but yours is well explained. 😉
Very helpful thanks
Como cambias el aceite de caja? Y a los cuantos kilometros se debe cambiar. Triptronic (how do you replace the triptronic oil, and at what time or miles have to change it?) Mazda 3 2012 skyactive .... please...
Mi caro es manual, no es automatico. Voy a buscar informacion, si encuentro algo especifico de este caro le voy amndar un mensaje.
Muchas Gracias
Disculpe pero yo no escribo el espanol muy bien. Si no estoy claro con mi respuesta dejame saber y voy a tratar de clarificar.
Busque informacion sobre su carro y lo que encontre es que es muy facil cambiar el aceite de la transmission.
1. Quite el tornillo que detiene el indiocador de nivel de aceite (dipstick).
2. Sube el carro en la misma manera que lo hicieras si estabs cambiando el aceite de motor.
3. Quita el tornillo (drain plug) de el aceite de transmission.
4. Es importante cambiar el tornillo y el emaque de el tornillo con una nueva
5. El torque para apretar el tornillo es 30-41 Nm (3.1-4.1 kgf-m, 23-30 ft-lbf)
6. Pon el carro nivel a el suelo.
7. Llena la transmission por medio del oyo de el indicador de el nivel.
8. Necesita entre 3.5 a 4.9 litros de aceite de transmission de Mazda. Es Mazda FZ.
La informacion que yo encontre indica que nunca se tiene que cambiar el liquido. Es por vida.
The only oil filter you can actually fill up lol
Looks just like my car lol
Pretty easy
Why would the oil be hot lol, don't run your car if your about to change the oil 😅
Although it is possible to change your oil while it is cold, changing it while it is hot is preferred since it's viscosity is lower which means you will be able to drain more of the oil out.