Amazing Torpedo 3 Shots?? firing, 3D Printed 1/72 Scale RC Submarine U-Boat VII C/41 Atlantic
![LaLaRC [라라RC]](http://yt3.ggpht.com/ytc/AIdro_k_yqsr6uuqWva1B_q4tVSzwi3lgLez4ei9y8CJW0dqqX0=s48-c-k-c0x00ffffff-no-rj)
Вставка
- Опубліковано 9 лют 2025
- #U-boat #3DPrinted #RCSubmarine
RC Submarine 1/72 scale German U-Boat 3 shot Torpedoes Firing, Snorkel, anti-aircraft gun DIY
음 무엇이 날 여기로 이끌었는지 모르겠지만... 혹시 천재세요?
Si.
유튜브 알고리즘
Awesome work! Hilarious when you make a mistake, you don’t get upset, you make it humorous for us!
@Reign Leroy no one cares.
One of the best sub models ever.
I love your sound effects 🤣. That sub is amazing and I'm amazed at what you've done with the 3d printing 👍👍👍.
대단하시군요 ! 스스로 이런걸 다 제작할 정도라니~~ 응원할께요
어뢰 발사 되는거 대단하네요 ㅎㅎ 유튜브로 대성하셔서 수영장 딸린 집으로 이사 하셔야겠어요
Excellent 👍
This is awesome and relaxing but is all that support material necessary?
amazing build! cannot wait to finish watching all your videos!
아주 훌륭하십니다, 선생님~
선생님 칭호는 너무나 과찬이십니다 감개무량 하네요^^;;
В носовой части торпеды можно взрыв пакет сделать, для индикации попадания. Классная игрушка!
Que máquina que eres picha. Un abrazo desde España
저한테는 당신이 천제입니다!!
Hello LaLaRC [라라RC], these torpedos and the launch mechanism are very well done! My only concern is that with the lipo battery the torpedos will run forever once they are launched. It could be very difficult to get them bak in a larger pool or even a lake. Did you try different concepts, too? Like with a timer, or a capacitor instead of a battery? This could restrict the running time to a reasonable distance.
Hi. I tested everything. Super condenser is shining. The power is weak and lasts less than 10 seconds. For torpedoes to be launched reliably from a submarine, lipo batteries are very good. A timer may be possible with a very small board, but I haven't tried it. There is no chance for me to shoot a torpedo in the lake. I can't swim and it's difficult to collect it. If the torpedo is large, wouldn't it be possible to control it with a receiver? Try stopping it even if the lipo battery voltage drops by just a few volts so that you can use the fail-safe function.
Thanks
@@LaLaRC Well, then a timer definitevely appears advised. Even in a (shallow) pool it will be almost impossible to catch the tiny stick while the motor runs. And waiting for the lipo to die is not an option, it will be half through the Atlantic Ocean until this happens.. And RC control for the torpedo: sure, but it would need to be significantly larger and so the submarine needs to be.
Nice work mr. Schwarzenegger
Congratulations 👏 your work is extraordinary. I'm impressed. Continue with your work, I subscribed for look :). Thanks for sharing.
Amazing job! I wonder if the magnets could be fit within the torpedo chamber so that the torpedo motor won't turn on until it is launched?
You're right.
There is a magnet in the torpedo chamber, and when fired by a rubber band, the motor moves away from the magnet. Thank you.
Excellent work
뭐야 유트브 알고리즘이 날 이끌어서 왔는데
천재분이시네 팔아주세요~
What an awesome works you made
Awesome videos bro
Молодец, что бы такое сделать нужно иметь прямые руки, красота!
Man you are amazing love the editing too hahah
Nice work
Прекрасная работа!
Very good job man...thanks for sharing
Me e suscrito a tu canal, me vendría muy bien tu ayuda, gracias muy buen video
You are crazy man! I am speechless! You can make anything with 3D!
This is the best u boat. Rc video ever!!!!! I was wondering can you actually buy submarines like this off the internet? As a kit?
be available for purchase If you search RC submarine in a large shopping mall, you can find it easily. Your compliment was a great help.
I have the same u boat model to! But it's from revell
지렸다... 홀센서 아이디어 대박이네요
어지간해서는 구독 좋아요 안 하는데 님은 정말 대박
어뢰가 되게 빠르네요ㅋㅋㅋ
네 저도 깜놀했네요ㅎㅎ시청 감사합니다^^
2차대전 시기 G7e는 아닌듯 하네요
Làm tàu sân bay đi bro
Это шедевр👍
Thank you youtube algorithm for finding this for me. I love it so much!
Great work
😱😱😱😱😱👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 fantastic
Gratulation, Really Not Bad i Hope there is Some paint Comming then it is Perfect
Your torpedos look like my modified Playmobil underwater motor, using a 1S Lipo instead of the traditional AA battery. 😁
저 방금 알고리즘으로 처음 보게 되었는데요 저 선생님 제자할래요 와 대박 ㅋㅋㅋㅋㅋ존경합니다
손재수가 좋아서 부럽네요.
Technically intriguing and hilariously entertaining! Sub'd!
Bangladesh 🇧🇩❤️❤️❤️🇧🇩🇧🇩❤️❤️
Nice done, great work.
구독을 안 할 수가 읍따
Your work is awesome!!
love seeing the progress of this project! Are the 3d parts custom-designed?
Thank you for enjoying it. All 3D parts are designed and printed by me.
That is so awesome!
Maybe u can use cheaper mini batteries. Btw nice work.
세상에... 후방어뢰발사관까지 만드셨네요...
수직 미사일 SLBM도 추가 될예정입니다^^ 감사합니다
미친 어뢰에도 쓰러스터를 달아서 추진력을 만들었네 ㄷ ㄷ
hello sir .. do you build costume designs?? thx
I do not design any costumes. thank you
thank you so much sir
이것 만들것에요?
What software do you use to design this stuff?
Invertor autodesk, 123d, fusion360, Thank you
오... 자기장 감지해서 모터를 멈춰두는 건가요 ㄷㄷ
Impecable tarea. Un genio.
Awsome work it looks amazing keep it up :)
😱Muito legal, maravilhoso!!!! Você não quer me doar um desses? Mesmo que em uma escala pequenina, do tamanho de uma mão? Parabéns pelo seu incrível trabalho. 🇧🇷👍🏻
Can we get the file to print the torpedo body and the mechanism, front and rear? Thank You for posting here.
The torpedo and rear launcher has already been shared.
im about to share it with the front launcher
be too busy to do haha ㅠㅠ Please wait slowly.
Always a stunning work what you do perfect. Cleaning CA clue wit tissue is nat a good idea🤣 Has already happened to me too.
Thank you always. I was surprised too, I'm not aware to bring tissue there
How is the motor switched on?
Use a magnet with a magnetic switch.
Thank you.
Sie which 3D printer are you using
It is flashforge guider 2
어뢰 발사 원리가 뭔지 봐도 모르겠어요. 모터라도 달은 건가요?
어뢰에 피뢰침 같이 2개 솟아있는것 정체가 뭔가요?
그건 캐패시터 버젼의 어뢰에서 나온것이였고 거기로 캐패시터를 충전해서 30초정도 가동했었는데 수평문제로 Lipo배터리로 전환하였습니다. 모터로 달려있구요^^
凄い
ロマンの塊
3d프린터 기종이 궁금해요
프린트는 플레쉬포지의 가이더2 입니다 감사합니다
Why are you using an old crystal radio?
That's because 72mhz can be operated underwater. Thank you.
wow from 200 subscribers on that day to thousands now
Chapeau too beatiful
Heyy, can u make a detailed video on the torpedoes please with thr 3d files
The torpedo stl file is in the video description section, and there is also a production video. www.thingiverse.com/thing:4657713
@@LaLaRC if you were to make me one, what would u seel it for?
@@LaLaRC and what are the sizes and lengths of the battery and motor?
super model :) :) :) pozdrowienia z Polski :) :) :)
Szkoda że on ma wywalone na inne komentarze które nie są napisane w jego ojczystym języku
어뢰 모터에 자석을 붙였다 때기만하면 온오프가 되는 원리가 무엇인지 설명 좀 해 주실 수 있나요 ㅠㅠ 영상보고 이해하는게 힘드네요
B접점 자석스위치를 사용합니다. 평소엔 연결되어 있는데 자석을 가까이 가져가면 연결이 끊어지는 스위치입니다. 그래서 어뢰를 넣어두면 자석에 의해 모터가 멈추고 방아쇠를 당겨 고무줄에 의해 어뢰가 틩겨나가면 자석으로 멀어지면서 모터에 전기가 흘러 스크류가 회전하면서 어뢰가 작동되는 원리 입니다. 감사합니다
@@LaLaRC 감사합니다! 너무 좋은 아이디어인것 같습니다
@@LaLaRC 라라rc님 그리고 잠수함 겉 프라모델은 어디서 구하셨는지 링크좀 보내 주실 수 있을까요? 직접 프린팅 하신 건 아닌거죠?
@@LaLaRC 라라님 겉 플라스틱 프라모델은 찾아보니깐
Revell type vii c/41 1:72
이모델인것 같은데 맞을까요?
@@민진영-m6v 네. 맞습니다. 제 잠수함 모델은 썸네일에도 있고 네이버 블러그 찾다보면 있습니다. 감사합니다.요즘은 비싸져서 파일구해보시는걸 추천합니다
혹시 박사님이세요?
평범한 회사원입니다. ^^ 과찬이십니다. ㄷㄷㄷ 감사합니다.
Awesome your modeling technique!
우와!
keren bang
You rock, my boy!
Excelente
Ооооо чел ты крут!!!!!
Rewelacja! :)
사랑해요
In Red October, didn't the Akula class kill itself with it's own torpedo? ô¿ô
혹시 국방과학연구소 에서 일하시는지 ㅋㅋ!?
ㅎㅎ과찬이십니다 그분들은 정말 연구소박사분이신걸요 울나라 화이팅~!! 감사합니다
Excellent !! The second good raison to have a swimming pool !
안녕하세요. 실력이 대단 하시네요. 정말 존경 스럽습니다. 저도 무선 조종을 하지만....선생님 실력 따라 갈려면 한창 멀었습니다.😂 선생님이 가까이 계시면 사부님으로 모시고 싶습니다😃. 구독 합니다.
과찬이십니다. 감히 사부와 선생님의 칭호까지 대단한 칭찬으로 듣겠습니다. 구독 감사합니다^^
@@LaLaRC
진심으로 존경스럽습니다. 😄 좋은 비디오 계속 올려 주시기 바랍니다. 감사합니다.
@@LaLaRC 자네 우리랑 같이 일해볼 생각 없는가? (KOREA LEGO 부사장) ㅋ
천재인가
국가 비밀 병기 만드는것 같아요.
이런 원리나 구조는 어디서 습득하시는 건가요?
정보의 바다 인터넷과 유튜브에서 많은 매커니즘을 보고 있습니다^^
Lucu😂🙏🙏
KOREANS is great elite
Next épisode : balistique missile
Es buenísimo!!!
자네 나랑같이 일해볼 생각 없는가? ㅋ
Are there files available for this?
The file has not been shared yet because it is still in the unfinished research phase. I will share it in the distant future.
Genius....
How much money you built that
I don't know because I haven't calculated. If I can guess the cost of the materials, I expect 500~600 dollars.
@@LaLaRC can i use diafragma pump for ballasttank but neseded 2 pump
@@DIyRcrc It's not impossible. need to control two water pumps, but I don't recommend them. I pursue my way.
Ракета чуть лодку не взорвала.
Ракета для самоуничтожения))))
발사후에 어뢰 수거 못하는 것 아닌가요? 넘 빠른데.....
어뢰 수거는 잠자리채로... ㅎㅎㅎ;;
สุดยอดคับ
ㅋㅋㅋ 너무 신기해
갓금손 행성하나 구하다오셨나보군요...