How to replace LCD Screen and Digitizer on Acer Chromebook CP311 2H. Step-by-step instructions

www.LaptopScreen.com/
www.laptopscreen.com/English/...
This is an Acer CP311-2H screen replacement guide.
For the replacement process we’ll need a plastic pick and a metal pick.
To begin turn the laptop off and disconnect the power cord.
Start removing the display assembly. Insert the plastic pick between the assembly and the back cover on the right side.
Move the pick along the edge up and down. Continue separating the display assembly on the left side.
Insert the pick in the top left corner and move it along the edge to the opposite side.
Once separation is achieved place the display assembly on the keyboard.
Use a metal pick to peel off the clear tape securing the video cable. Using plastic pick open the connector’s bracket.
Disconnect the video cable. Using Phillips screwdriver remove the screw holding the microphone at the top of the
front assembly. Detach the microphone from the assembly. Using plastic pick detach the webcam board from the assembly.
Release the webcam and microphone cable from its channel and put it aside. Discard the old display assembly.
Take the new assembly and put it on the keyboard. Insert the webcam and microphone cable into its channel.
Insert the webcam board in its slot. Then insert the microphone in its slot. Secure the microphone with a Phillips screw.
Make sure that all cables are in the right positions. Reconnect the video cable. Close the connector’s bracket.
Secure it with a clear tape.
CAUTION! It is very important not to force any connectors. As well you must not twist
or slant the connector when plugging it in.
Lift the screen up. Press firmly in the bottom corners then go around the perimeter snapping the tabs back in place.
Close the laptop and make sure that the tabs are closed at the bottom of the screen
Turn the laptop on. And we are done!

[@garthmicro]

Do you have a video showing screen replacement for the Acer Swift 5 Pro laptop?

[@privatepp2244]

Is it the same procedure for CP311 3H series? Thanks!

[@Banko751]

Will this process work with model # N16Q10 acre ? Thank you

[@CarlHarbaran]

Where did you get the replacement part ?

[@nozomihk]

Acer Spin 713 the same method?

[@harryjellis100]

Did it work on your 713 where did you get the screen Thanks

[@blackjaguar324]

1:53 It really doesn't help that there was a skip in the part where you were inserting the cable in the hinge without struggling. Or were you actually struggling with that part and you edited that out? I feel like it would be easier to separate the lid from the base when replacing the LCD.

[@Laptopscreen]

Sorry you're having trouble. The installer doesn't edit these videos, so it wasn't on purpose. I don't believe there was much struggle as the cable just lays there as the securing starts from the webcam end. That way the cable is tight from the web cam and slacked near the hinge.