The whole "flip the chest panel to the side so you can go prone lower" thing is so stupid obvious and yet somehow I never thought of it before. Thanks for that.
Hey brutha I really appreciate all the information you put out. I’m a civilian who’s just trying to better myself and run gear and train properly. You have really helped me out immensely and are easily one of the best channels on this platform. I really appreciate you man.
Can you do a video on some of you rifle setups? Its entertaining to watch, Mainly Id love to see your thoughts on rifle barrel lengthes, applications, Laser setups etc. Like "Which guns is in my rotation 2021" Kinda video.
Esstacs are fine. Personally I find the importance of being able to compress (in awkward positions or prone) the mag pouch more important than kydex keeping them open for reindexing a mag.
where can i can get those female clips that are on your plate carrier so i can attach it to my plate carrier and clip in and use a micro fight mk4 as my mag holders/admin pouch
Please tell me more about how the front panel is set up, perhaps a parts list, I'm in dire straights trying to locate where to buy this, I can't seem to find anything that resembles this system 😢
he goes over it on another plate carrier setup video he has where he goes through about 3 different plate carriers and the mag pouches he used. This is what he's running www.perrozdesigns.com/shop/equipment/triple-magazine-placard/ Check these out too: www.velsyst.com/collections/swiftclip-placards
Are there environments you would be concerned about dirt/mud etc. interfering with your front velcro when you go prone by popping your equipment off to the left? And what was the name of that front panel? I'm interested in seeing if it would work with my Airlite SPC.
@@musicman1eanda It isn't a feature, it's literally un-doing a buckle then moving it to the side. This can be done with pretty much every panel that uses a buckle.
@DomesticPenguin i own a slickster with some build up accy's on it. big fan of it...whats nice about it is its small enough that if you wanted to you can take off the dangler and front pouches and its super covert like under a sweater/jacket its unnoticeable! i have tried out the DFNDR pc as well which is also super nice, more $ but has buckles which IS handy. my opinion/research is go with Ferro, DFNDR or the Cry JPC / JPC 2.0
Hi Benjamin - IcePlate EXO (ICE) lets you run our IMS Pro (now equipped with One-Way Valves) on the inside (conductive cooling, heating, hydration) or the outside (hydration only) of the carrier, depending on what you need for your mission/application. Details with gallery pics and videos in long scroll: www.qoreperformance.com/collections/iceplate-exo/products/iceplate-exo Hope that helps, but happy to answer any other questions you might have. #StayFrosty
As a civilian, I'm always wondering how necessary it is to have bungee retention on mags. A number of guys who served run bungee retention on their mags, and I feel like that's probably necessary if you're in a adrenaline riddled, life or death situation. How vital is this to you? Do you lose mags from your placard easier than most might think in a gun fight?
I don't run bungee retention (if you don't count the HSGI taco pouches as bungee retention) Only time I ever seen the need for bungee retention in the army was for airborne operations. If you stay on the ground it's not necessary IMO.
I ran bungees occasionally but it isn't necessary 99% of the time. Just make sure the retention is decent. Only pouches I've ever had serious retention problems with is blue force gear.
@@KineticConsulting hey I checked outthe perroz stuff, their called S&S Precision pull tabs. appreciate all the content you put out it's the little shit like those pull tabs that make all the difference.
@@KineticConsulting Any experience with ShotStop plates? I've seen some sketch ballistic results/deformation w/ Hesco in various tests online (same with DFNDR, mostly insane deformation). ShotStop seems to be pretty impressive, especially with the GBRS Group test they did not too long ago: ua-cam.com/video/DV7wIbM9MP4/v-deo.html John from WPS did a test on them too I believe and they did really well. Do you run DFNDR/Hesco b/c you know people that have been shot wearing them and they worked well or is it just b/c everyone on UA-cam seems to run them? The tests I've seen online aren't impressive. ShotStop seems superior. You have actual combat experience, so....Thoughts?
@@jrgfox I've been wondering the same thing about my 3810s. My current opinion is that they're probably good enough for 99.99% of situations. The main advantage of the lvl4s is just the armor penetration protection.
The whole "flip the chest panel to the side so you can go prone lower" thing is so stupid obvious and yet somehow I never thought of it before. Thanks for that.
I would flip mine to the front without unclipping a buckle and it was always in my way. Never thought to go to the side. Just leveled up.
Just that little tidbit alone was enough for a like from me. You're right, it's so obvious but I hadn't seen it either
Hey brutha I really appreciate all the information you put out. I’m a civilian who’s just trying to better myself and run gear and train properly. You have really helped me out immensely and are easily one of the best channels on this platform. I really appreciate you man.
Happy to help man. I'm here to educate
Very informative. I would like to see a video on how you setup your Comms, routing etc.on a plate carrier.
Can you do a video on some of you rifle setups? Its entertaining to watch, Mainly Id love to see your thoughts on rifle barrel lengthes, applications, Laser setups etc. Like "Which guns is in my rotation 2021" Kinda video.
one of my favorite channels
Could you make a bad weather training gear video?
The ear pro tip...awesome idea.
This is good stuff. Thanks for taking the time to share 👍
Dinosaur joke almost made me spit my drink out
The explanation had me dying even more
Funny you post this shortly after I asked about doing a vid like this. Good stuff as always, thanks for the info.
Filmed at the same but aired at a different time? What wizardry is this?
This is the way
Love videos man. Very informative!
You got a link to that pry bar? Good video btw
It's a Winkler knives
@@KineticConsulting thanks
Came here for this question thanks for that and for the answer haha
Thanks for the video love it. Do you have any recommendations for a pouch for a PvS 14 on a plate carrier
Defense mechanisms has a padded insert for their little gp pouch. Personally I don't put NVGs on my pc.
@@KineticConsulting thank you, won't put it on the plate carrier.
@@KineticConsulting do you just run your nods in the pack when they aren’t being used?
@@rogueconcepts7404 pretty much
Whats the wing style pouch thats holding the two mags called?
Thanks.
They are from spiritus. Not sure if they make them anymore
I’m just curious: why don’t you use Esstac Kiwis (sp?)? I love them, but maybe there’s some aspect of them that I’m not considering.
Esstacs are fine. Personally I find the importance of being able to compress (in awkward positions or prone) the mag pouch more important than kydex keeping them open for reindexing a mag.
@@KineticConsulting thank you for responding! That makes sense. I hadn’t considered that.
Hello, nice setup! What is the name of plate carrier?
ua-cam.com/video/OMPFbghwFss/v-deo.html
where can i can get those female clips that are on your plate carrier so i can attach it to my plate carrier and clip in and use a micro fight mk4 as my mag holders/admin pouch
They can be found on defense mechanisms website
@@KineticConsulting thank you for the quick response. very informative video.
"3 is 2 + 1" 🤯🤯🤯
Please tell me more about how the front panel is set up, perhaps a parts list, I'm in dire straights trying to locate where to buy this, I can't seem to find anything that resembles this system 😢
It’s a perroz design triple mag shingle
he goes over it on another plate carrier setup video he has where he goes through about 3 different plate carriers and the mag pouches he used.
This is what he's running
www.perrozdesigns.com/shop/equipment/triple-magazine-placard/
Check these out too:
www.velsyst.com/collections/swiftclip-placards
Are there environments you would be concerned about dirt/mud etc. interfering with your front velcro when you go prone by popping your equipment off to the left? And what was the name of that front panel? I'm interested in seeing if it would work with my Airlite SPC.
Yeah, I'd worry about it if it was the environment. It's from perroz
@@KineticConsulting Oooph. 140+ day wait time. :/ Is there another alternative with the same stow to the side feature?
@@musicman1eanda It isn't a feature, it's literally un-doing a buckle then moving it to the side. This can be done with pretty much every panel that uses a buckle.
@@mist3rpink838 I'll admit I'm a complete newb at this stuff. 99% of my training is solely handgun. Trying to change that.
@@musicman1eanda No worries.
Great video btw
How many cookies fit in that pack?
Any chance you remember what company and model that side pouch is?
Spiritus
@@KineticConsulting Can you elaborate at all? 1 single word doesn't help much
@@esti5506 sorry I was driving. Spiritus systems makes it. It's their med GP pouch.
I'm stealing the phrase "one trick pony's"
Great vid. Is that the medium or small Spiritus gp pouch?
So your scarab is no longer a better option compared to both the ones you run now, what happened to that?
It's a good carrier but too much material compared to the current offerings.
Is it just me, or was that VS-17 way thinner/smaller than a normal panel?
Yep, it's a different kind, has tie downs too
@@KineticConsulting any chance you could share your source?
@@dpaulday I got these from Refactor
What’s your thoughts on shellbacks carriers? I like mine and I like how it’s setup but thinking of selling it for a better carrier. Thoughts?
ferro!!
@DomesticPenguin i own a slickster with some build up accy's on it. big fan of it...whats nice about it is its small enough that if you wanted to you can take off the dangler and front pouches and its super covert like under a sweater/jacket its unnoticeable!
i have tried out the DFNDR pc as well which is also super nice, more $ but has buckles which IS handy.
my opinion/research is go with Ferro, DFNDR or the Cry JPC / JPC 2.0
thoughts on new lbt g3?
Question! How do you run hydration?
Hi Benjamin - IcePlate EXO (ICE) lets you run our IMS Pro (now equipped with One-Way Valves) on the inside (conductive cooling, heating, hydration) or the outside (hydration only) of the carrier, depending on what you need for your mission/application. Details with gallery pics and videos in long scroll:
www.qoreperformance.com/collections/iceplate-exo/products/iceplate-exo
Hope that helps, but happy to answer any other questions you might have. #StayFrosty
What is the name of the admin pouch and who manufactures it?
The one behind the mags is from AXL
As a civilian, I'm always wondering how necessary it is to have bungee retention on mags. A number of guys who served run bungee retention on their mags, and I feel like that's probably necessary if you're in a adrenaline riddled, life or death situation. How vital is this to you? Do you lose mags from your placard easier than most might think in a gun fight?
Doesn't matter really. It comes down to you and practicing.
I don't run bungee retention (if you don't count the HSGI taco pouches as bungee retention)
Only time I ever seen the need for bungee retention in the army was for airborne operations. If you stay on the ground it's not necessary IMO.
I ran bungees occasionally but it isn't necessary 99% of the time. Just make sure the retention is decent. Only pouches I've ever had serious retention problems with is blue force gear.
@@mako2534 what about pistol holster retention? Safariland or other non-retention holster on the war belt?
@@Ureyeuh for duty and heavy use the Als or SLS is my go to. For ccw kydex is gtg
what kind of bungee straps are you using with the magpods? that's pretty sweet setup.
The one that comes with the Perroz pouch
@@KineticConsulting hey I checked outthe perroz stuff, their called S&S Precision pull tabs. appreciate all the content you put out it's the little shit like those pull tabs that make all the difference.
I'm not a dinosaur I evolve I don't die
Crocs and chickens: oh ok, so fuck me huh?
What actual plates are in those?
I have a mixture of DFNDR, hesco and velocity
Whats your job man? Apart from the you tubes
I believe he is a firearms instructor full time.
Where are you based out of?
I teach all over but live in FL
Appreciate your work bro 🤙🏾🍪⚡
Flip the panel seems like a snag hazard in a recce situation. Especially if you are in a fire fight
If you're doing the recce right you shouldn't be fighting.
What plates do you run bro?
DFNDR and Hesco
Thank you sir. Was debating on the 4800 or the 3810 Hesco SAPI’s to go in a jpc 2.0. Didn’t know if the extra protection was worth the weight penalty.
@@KineticConsulting Any experience with ShotStop plates? I've seen some sketch ballistic results/deformation w/ Hesco in various tests online (same with DFNDR, mostly insane deformation). ShotStop seems to be pretty impressive, especially with the GBRS Group test they did not too long ago: ua-cam.com/video/DV7wIbM9MP4/v-deo.html John from WPS did a test on them too I believe and they did really well. Do you run DFNDR/Hesco b/c you know people that have been shot wearing them and they worked well or is it just b/c everyone on UA-cam seems to run them? The tests I've seen online aren't impressive. ShotStop seems superior. You have actual combat experience, so....Thoughts?
@@jrgfox I've been wondering the same thing about my 3810s. My current opinion is that they're probably good enough for 99.99% of situations. The main advantage of the lvl4s is just the armor penetration protection.
Why not just use the safelight FRAS if you want all around protection
Because it's not actually on the NIJ list
Thanks for the knowledge
Had to be the first comment
Found two more eyes...
Cool.