Thank you Coffee Samurai! Great review and very kind of you to provide english subtitles. I have just placed an order for the S3 and can't wait for it to arrive! Thanks for posting.
Thank you very much for the delightful comment! I may not be proficient in English, but I'll do my best to convey my thoughts to everyone somehow! The S3 is an excellent coffee grinder.＾＾
it's nice to see the first timemore grinder with the adjustment on the outside and with the grind setting being 1-to-1 so you always know what setting the grinder is at, as opposed to the adjustment dial looping around without any markings. game changer
I've got a Timer S3 hand grinder for coffee, but there is an unexpected problem it can't grind my coffee fine enough for espresso/cezve, so now I'm looking to upgrade it for a finer coffee grind. What accessories or modifications are available specifically for this hand grinder to achieve a thinner coffee grind? Thanks for video!
The blade equipped in this S3 is of the type 'S2C890,' with an inner blade diameter of approximately 30mm and an outer blade diameter of approximately 42mm.
When compared to the Comandante, I feel that the Comandante is slightly better suited for a stable drip with some fine grounds, while the KINU has fewer fines and more uniform particle size. Both are outstanding at a high level, and for dark roast coffee drips, I lean towards the Comandante, while for light roast specialty coffee, I think the KINU is stronger, at least for now. However, it does not mean that the KINU is weak for dark roasts. Both the Comandante and KINU are at an amazing level. I haven't tried a hand grinder called Pietoro.
One French reviewer didn't think the S3 could grind fine enough for espresso as his Lelit espresso maker would only register about 4-6 bars when brewing. He later preferred the Kingrinder K4, which was designed for espresso grinds. Your results may vary. Hopefully you can find alternate reviews for the S3 making espresso. BTW, he ground 16g of coffee beans in about 45 seconds at setting '0'.
I purchased the S3 and I don't like it. It only has 10 clicks for espresso. I used it with 3 types of coffee beans and on the finest grind size it is still not fine enough. Coffee (30grams) runs in 12-14 seconds. Way too fast. Next to this, the grip of the grinder is awful. And the exterior is hard to clean. Be aware: not suitable for good espresso!!
![TIMEMORE 3rd generation "Timemore C3" is now available. Comparison with C2 [536th]](http://i.ytimg.com/vi/w-HICVMpY-g/mqdefault.jpg)
外側調整なのに分解の方法は今までのC2やC3などの内側調整と同じやり方で簡単なのがすごく良いですね！
Thank you Coffee Samurai!
Great review and very kind of you to provide english subtitles.
I have just placed an order for the S3 and can't wait for it to arrive!
Thanks for posting.
Thank you very much for the delightful comment!
I may not be proficient in English, but I'll do my best to convey my thoughts to everyone somehow!
The S3 is an excellent coffee grinder.＾＾
Thank you for this video! I recently purchased a Timemore Chestnut X and love it but this S3 having an external dial makes me very jealous! 🥲
it's nice to see the first timemore grinder with the adjustment on the outside and with the grind setting being 1-to-1 so you always know what setting the grinder is at, as opposed to the adjustment dial looping around without any markings. game changer
S3に興味が沸々と😊年明けが楽しみです。
Kingrinderk4、k6と違って分解清掃が簡単なのが良いですね
すでにc3持ってるけど欲しいなぁ
タイムモアユーザーとして待ち望んでおりました！ 別メーカーの外調整のミルを買おうかと考えたこともありますが我慢し続けた甲斐があったというものですｗ nanoかMAXが出たら買っちゃうかも知れませんｗ
外ダイヤル式なのに分解清掃が簡単そうですね。凄く欲しいです
Thank you for your sharing! May I know if there is no TimeMore golden Color logo on the machine body?
I've got a Timer S3 hand grinder for coffee, but there is an unexpected problem it can't grind my coffee fine enough for espresso/cezve, so now I'm looking to upgrade it for a finer coffee grind. What accessories or modifications are available specifically for this hand grinder to achieve a thinner coffee grind?
Thanks for video!
I also think that the S3 is not very suitable for grinding coffee beans to an extremely fine consistency.
SCAJの時に気になってました！
挽き目調整が外ダイヤルの場合でも、分解時に小さなパーツを外したりする手間が無いのが良いですね。
タイムモアC2MAXを愛用してます。S3、気になりますね〜〜〜〜〜。
お値段が気になるところです。
C3S MAXと同様に樹脂パーツ無しのオール金属製でしょうか？ハンドルはC3S MAXと同じ物のように見えますが。
ハンドル含め金属製です。
C3MAXとは長さと、若干の形状の違いはありますが、C3MAXのハンドルをS3に装着は可能でした＾＾ハンドル写真をTwitter（X）に載せておきます＾＾
Thanks for this presentation! I'm looking for the size of the burr in mm, could you please tell me ? 😊
The blade equipped in this S3 is of the type 'S2C890,' with an inner blade diameter of approximately 30mm and an outer blade diameter of approximately 42mm.
ええな～😊
高いんかなぁ🤔C3持ってるけど気になる〜
Timemore Chestnut Xを持っております。刃の形はX liteよりもXに近い感じがしますが、どうでしょうか？
刃の形が違えば購入したいと思っています。
刃の形状は確かに違いますが、Xと比べてどうかというと正直微妙なところです。
今までのX、X-liteがほぼほぼ「廃版」になり、今後の高性能機種がS3になるので、Xをお持ちでしたら挽き目だけで考えると、大きな差というのは感じづらい可能性があります。外ダイヤルは便利ですが。
ありがとうございます。購入できたら比較したいと思います。
海外レビュアーの動画でx、x liteと比較して浅煎りが挽きにくいそうですが、体感できますでしょうか
おそらく「硬度」の違いだと思われます。
X-liteはSUS440に対して、S3は形状が変わりバージョンアップはしましたがSUS420のようです。
How does the compare to C40 by comandante or Pietro hand grinders
When compared to the Comandante, I feel that the Comandante is slightly better suited for a stable drip with some fine grounds, while the KINU has fewer fines and more uniform particle size. Both are outstanding at a high level, and for dark roast coffee drips, I lean towards the Comandante, while for light roast specialty coffee, I think the KINU is stronger, at least for now. However, it does not mean that the KINU is weak for dark roasts. Both the Comandante and KINU are at an amazing level. I haven't tried a hand grinder called Pietoro.
発売はいつになるんでしょうか？
もう間もなくだと思います。
エスプレッソは行けそうですか？
いけますね＾＾手動なので少々手間はかかりますが＾＾；
Xlite廃盤ですか😳評判良かったのに
結構外ダイヤル需要大きかったってことですね😅
パウダーってコトはターキッシュ？エスプレッソもいけそうですね🤭
下ネジのクリック数がXやXliteに近いのは名残り？ですかね？
価格はXliteに比べてどのくらいなんでしょうか？ﾀﾞｲﾀｲﾃﾞﾓｲｲﾉﾃﾞ🤭
ターキッシュもいけます＾＾
価格はX-liteとそこまで変わらないくらいかと予想してます＾＾
how long does it take to grind 20g for espresso
I'm sorry, I've currently lent out the sample machine, so I'll try it out once it's returned.
One French reviewer didn't think the S3 could grind fine enough for espresso as his Lelit espresso maker would only register about 4-6 bars when brewing. He later preferred the Kingrinder K4, which was designed for espresso grinds. Your results may vary. Hopefully you can find alternate reviews for the S3 making espresso. BTW, he ground 16g of coffee beans in about 45 seconds at setting '0'.
I purchased the S3 and I don't like it. It only has 10 clicks for espresso. I used it with 3 types of coffee beans and on the finest grind size it is still not fine enough. Coffee (30grams) runs in 12-14 seconds. Way too fast.
Next to this, the grip of the grinder is awful. And the exterior is hard to clean.
Be aware: not suitable for good espresso!!